I am currently trying to install Windows 7 Professional RTM to my computer. After installing it onto my laptop, I followed the same exact steps to install the 64 bit version instead of the 32 bit on my netbook. A problem that occured is that when I go on the bios, there is several options to boot from, and none of them are working. I tried USB-CD, USB-FDD, USB-HDD and none are working... Does anyone have any suggestions?
View 9 RepliesI have a laptop that has Vista installed on it. I have an upgrade disc for Windows 7 and I am thinking about performing a "clean installation" over the Vista OS - which I know is allowed, on the following link;click here Now, I would like to create another partition (on the same hard drive) and install Vista (using the same disc that it came with the laptop) onto that blank hard drive partition
View 10 Replies View RelatedI am dual-booting both x64 of Windows 7 Home Premium, and Windows Vista SP2 Home Premium, and dang, I dont understand how anyone can think 7 looks like vista..and speed?..vista has sluggish reactions compared to 7..more jerky graphics as well..
View 8 Replies View RelatedA few weeks ago my old Lenovo computer died. I took the HD out and it worked OK in another computer. I then bought a new HP with Windows 7 64 bit. Everything fine except lazy greedy Canon do not produce drivers for my existing scanner for 64 bit, only 32 bit. I have wasted a lot of time trying other drivers, work arounds and expensive memory hogging simulation programs. Howvere, I saw a case I can put my old HD into in a shop the other day. What I am wondering now is if it is possible to do this, plug in it and then boot my old system on those occasions I need to use my scanner?
View 7 Replies View RelatedCurrently I have Vista 32 bit installed on my pc with the RC version of 7 installed on a 20gb partition. I recently bought the 64 bit version of 7 and am looking for a way to install it.
I want to keep Vista on my computer just in case a program or something isn't compatible with 7.
I was thinking that i would format the partition I currently have and move vista to that partition and then install 7 on the main partition.
Would this be the correct way to go about dual booting between a 32 and 64 bit operating system?
As an alternative to re-installing all my programmes etc. I have recently considered installing Windows 7.0 on one of my three harddrives. I understand that this is perfectly feasible, however, my main aim is to be able to address more ram, hence W 7.0 64 bit. Would Vista 32 still run happily with 8GB or more of memory in the mobo?The hd is 500 Gig.
View 10 Replies View RelatedI installed vista on my harddrive, and then made a partition and installed windows 7 on it.
I no longer want vista, and just want windows 7.
How would I go about deleting vista all together, and just have windows 7?
If I make the windows 7 partition active, it won't boot.
I have a 2005 Windows Vista, and it may seem old, but I need to for school. When I start up my laptop it does the normal loading screen, then a different screen appears.
[code]...
PC boots up to Windows Boot Manager, I choose Windows 7, get the Windows Error Recovery screen, try all of the possible options fom Safe Mode to "open with command prompt". Result each time is the Windows coloured flag coming together then "Setup is starting services". PC then reboots and I'm back at the start again and around we go.I'd be happy if I could somehow get to the Windows.
View 3 Replies View RelatedI posted here earlier (a couple weeks ago) about a painless installation of Windows 7 on a resized C Drive, which I partitioned into into a C Drive (Vista) and W Drive (Win 7).
All was fine until yesterday - I had been able to login into and out of both operating systems without drama - when out of the blue, for no apparent reason, whenever I try and log onto the Vista operating system, it allows me to logon as Rod with my correct password, but after the logon screen I get the "Preparing your Desktop" and and am presented with a Desktop and icons - but not for me! I get a bubble pop up out of the System Tray that says "Windows had trouble loading your Profile and has loaded up a temporary profile. Contact your administrator".
That would be me! I for the life of me don't know what happened. I have created no new users, nor amended any existing ones. Though, when using Windows 7 earlier in the day, I had to give access rights and permissions to All authenticated Users in order to access and use files on a separate (D) Drive.
Will this have screwed up my User Profile and login to Vista? How?
I currently have a standard computer setup with a windows 7 operating system installed. What I want to do is dual boot with Windows 7 as my primary os but using an esata cable connect the hard drive from my laptop to the computer and have this as a secondary boot option. The laptop hard drive has a full install of vista on it. Is this possible, every time I think about doing it I worry about the drivers on the laptop hdd and how those will react to my main computers hardware as obviously the laptop hardrive is setup to look at the laptop hardware.
View 2 Replies View RelatedI have another laptop and its a HP 2230s. I originally installed Windows 7 professional 64bit. But I have swapped the ram into my Lenovo ThinkPad. So the HP now has 2GB. I created a new partition and installed Vista Business 32bit on it. When I started the install windows .exe program in Windows 7, everything went well until it rebooted. When I rebooted, windows said something like:
Windows Boot manager:
The system cannot boot because of a recent change to files/hardware. (Something like that). Insert your windows disk.
So I just rebooted my laptop with the vista disk inside and installed. After, when everything was working, I wanted to go to the Windows 7 partition to un-install programs and copy some files over to the vista partition, the laptop just booted into vista.
I downloaded the easy BCD editior and visual BCD editor. (in the vista partition), I clicked the auto fix in visual BCD editor. It detected my windows installations. At the boot screen, I can select either Windows 7 or Vista. But when I select 7, the same error message appears.
Then I rebooted my laptop with a USB containing the Windows 7 (64bit) recovery tools. After, I don't have the message again. But when it goes to the starting windows animation, it stops halfway and it gets a BSOD. I tried debugging mode, it worked.
I found out that the larger partition, (Windows 7) is the C: drive. But when I boot into the smaller partition, (Windows Vista), the drive is also C:!. So I don't know what I could do.
I insert the windows 7 disk and repaired my installation, it just boots into windows 7. But when I insert the Vista disk and repaired my installation, it just boots into Vista!
I had a failure to my system drive (was my fault). Anyhow the drive was still under warranty so I did an RMA with WD. While waiting for my replacement drive, I reinstalled Windows 7 to another HD and it is now my system drive. Now that my replacement drive have arrived, I image the other HD and restore to the replacement HD. My question is, how can I have it boot from the replacement HD?
What I did was mark the old HD as inactive and marked the replacement as active but when I boot up, it tells me it cannot find a boot device.
When I am installing Windows (XP or 7), I first set the computer's CMOS to "Boot from CD ROM" first. Then I put the factory CD or DVD into the drive. Then I turn the machine on. After POST, I see the message "Press any key to boot from CD" and it continues. OK - that's normal
Now - let's do this: I copy the image of the bootable CD onto a flash drive. I then set the computer to "Boot from USB Flash drive" first. I install the flash drive. I turn the machine on. I never see the message "Press any key to boot from CD".
The computer's BIOS has several choices of "boot from flash drive" Which one do I choose? Question: Do I have to format the flash as a bootable? Is a simple "copy all" from a factory installation disk sufficient? Should I use a "clone' program to prepare the flash drive?
My computer yesterday was an XP machine with one hard drive. I wanted to test Windows 7 but I was afraid I would screw something up with my XP drive in the process. We'll call this Drive A.
Yesterday I bought a new hard drive, Drive B. I downloaded the Windows 7 ISO, got some drivers, and turned off my computer. I physically removed Drive A from the computer and put Drive B in. I started the computer and put the DVD in. Setup was fine, I had some trouble with getting the onboard NIC to work but I was able to overcome.
Now I needed to get back into my XP install to get some stuff done (play video games). I shut my computer down, pulled out Drive B, put Drive A back in and booted up. But I got a boot error message, and it looks like it's a Windows 7 Boot error message. How can this be if I removed the hard drive.
0xc000000e
The boot selection failed because a required device is inaccessible
It's almost as if my computer is trying to boot to Windows 7 even though I removed the hard drive containing the operating system. How do I get into my XP system? The drive is fine, I connected it as a slave and I can access the files on there. I'm guess Windows 7 makes some kind of change on the motherboard that forces it to boot to 7?
laptop not booting on dvd or pen drive. i have tried a lot. my dvd drive is ok but not reading windows cd or any bootable pendrive
View 2 Replies View RelatedMy friend asked me to fix her laptop, which has been failing to boot, getting as far as the blue Windows 7 login screen then hanging. The login UI doesn't load, it's just the blue background.I tried to re-install Windows from the boot disc, but when I put in the disc, I wasn't able to boot from it. Instead the computer booted from the hard-drive again and hung at the same place. This is after changing the boot priority in the BIOS.Since the laptop is out of warranty, and is to all intents and purposes a brick, I removed the Hard-drive, and connected it to my computer to see if I could reformat the drive from there. The thing that has really puzzled me though, is that my computer wouldn't boot when this hard drive was attached, despite running fine before I attached the drive, and after I removed it.
Which leads me to think there's possibly a really malicious virus or something on the drive, which makes it the default boot device, despite having a corrupted operating system installed that won't boot.
I'm using an HP laptop and made a bootable flash key with the Microsoft utility (which I downloaded from Microsoft) to make a Windows 7 installation. I (supposedly) changed the boot order in the bIOS to look first at the key. Didn't work - booted directly into Windows 7 (seemingly bypassed the bootable key).
1. How do I tell if the USB key is bootable?
2. What might be the reason(s) why my laptop won't boot from the USB key?
I was wondering if there are any issue with dual booting Windows 7 pro 64 bit on an internal SSD drive. I currently have Windows 7 pro 64 bit on a 500gb 7200 hard drive plus a backup 1 TB 7200 rpm drive; but I wanted the speed I would get by installing win7 pro 64bit on a 250gb SSD drive. I would basically only install specific essential software like Adobe Premeire Pro and Photoshop, among others. I originally was going to use the SDD drive as a scratch disc but after reading, I thought it might be better to just install Win7 on the SSD drive. This way I could also experiment with what would be the best configuration. I still get confused about scratch disc and how useful they are if you have plenty of memory.
View 9 Replies View RelatedOk I have a emachine e725 running windows 7 32bit and a acer running on windows vista. My emachine recently crashed in the blue screen and I tried to complete a system restore. I was able to get through the advanced boot menu and use the repair your computer option to restore windows. During the windows setup process I got another blue screen and the computer restarting. It then started the process over and once it got to the step that says windows is preparing setup, it gives an error msg saying something along the lines of windows was interupted and needs to restart to complete installation, and it has an option to press ok. This cycle continues and I can not open in safe mode because it says "windows can not complete the installation in safemode. Also the option to repair your computer in the advanced menu options is no longer available. So after wrestling with windows starting up I decided to create a back up and restore disc on my acer for my windows 7 computer. I tried putting it on a disc but it would not boot. So I tried creating a installation disc of windows 7 and tried booting from the cdrom drive. Once I did that I got a error msg saying "device driver not found: MSCD001 No valid cdrom device drivers selected. It then gives me the A:>. Im not sure if I created the disc wrong since I cant unzip the entire file I downloaded with needing an encryption password.
View 9 Replies View RelatedMotherboard: Asus A8N5X
So after the hard drive fiasco that I reported in another thread, I got clever and decided to create an "Emergency Boot Drive" that would have Windows on it as well as some utilities for data recovery. I took one of the many old hard drives that I have floating around and plugged it into the computer AND unplugged my other two drives. Then I ran Windows Install off the DVD and installed Windows to the old drive. I installed my software. All was good. I plugged in the other two drives and tried to boot from the "Emergency" drive and it worked fine.Last step was to unplug the emergency drive from the motherboard, connect it via USB and try to boot. The BIOS sees the drive and I tell it to boot from the drive. So the computer is booting. The "Starting Windows" message comes up and then the system reboots. This happens everytime I try it.Does Windows reset the USB ports so that the drive suddenly vanishes?
In order to be able to Boot from a flash drive , I understand this ability must be enabled in ones system .I have a desktop and a new laptop in neither of which do I see this choice .I presume this is a choice originally installed on the m/b and it would not , therefore , be possible to use software to enable it ?
View 1 Replies View RelatedI had my old hard drive installed in my Windows 7 computer. It worked for several months but now it started booting from the old drive that still has Windows Vista on it. My simple fix has been to unplug that drive while booting it up. Can I just delete the Windows Vista files?
View 7 Replies View RelatedI have instlled windows 7 in my c: drive and booting files are stored in another drive(d: drive). Due to this problem im unable to store my important files in d: drive. If I save my important files in that drive whenever I want to chnge the OS I suppose to format the two drives c: and d: drives. so I may lost my important files.
View 3 Replies View RelatedIt just shows the blue colour only but not recognized by laptop
View 1 Replies View RelatedI'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.
I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever.
Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB.
This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.
So I tried to manually set up the bootable flash drive, which also didn't work.
After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. [URL] I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive.
Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS) Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn.
Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, x64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 3063 Mb
Graphics Card: NVIDIA GeForce GTX 560, 1023 Mb
Hard Drives: C: Total - 476837 MB, Free - 132797 MB; E: Total - 234627 MB, Free - 205990 MB; F: Total - 234316 MB, Free - 233246 MB;
Motherboard: ASUSTeK Computer INC., P7P55D PRO
Antivirus: AVG Anti-Virus Free, Updated and Enabled
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever. Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB. This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.So I tried to manually set up the bootable flash drive, which also didn't work. After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive. Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS)Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn. Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
View 1 Replies View RelatedMy operating system is giving out, i am locking up regularly now, i feel i have too many things installed on a vary small drive to pinpoint the problem. i have been neeeding a second hard drive for a while now, i think its time.The question is, how can i boot off of one hard drive, but install all my applications on the other, as if i where booting my OS off of a 30gb ssd, just big enough for the operating system, but actually installing things on my second hard drive.
View 9 Replies View RelatedI am trying to wipe my current XP installation clean and move on to Windows 7.
I first tried to install the setup.exe (Custom install option of course) from within the XP OS, but soon discovered you cannot do that and wipe out my only partition on C: at the same time.
I don't have a DVD-RW drive to write a boot disk, so instead I am trying to install through my external hard drive. I meticulously followed this tutorial from PC World yet when I instruct the PC in BIOS to boot from the external hard drive, I keep getting an "invalid system disk, press any key" error when the computer boots and looks for the setup files. This is despite the fact that setup seems to work perfectly from within the XP OS.
PC World tutorial:
Install Windows 7 From an External Hard Drive - PC World
Can anyone please offer me any helpful advice to get the external hard drive setup to work or help me find a way to install 7 from within XP?
Anyone know exactly why I keep getting the "invalid disk" error each time when I try to boot from my external hard drive? As mentioned in the PC World tutorial, I marked the external hard drive as an active partition and the setup files seem to work fine from within XP. If it helps, in the external hard drive root folder is both the Windows 7 ISO and all the files contained (which I extracted using PowerISO).
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View Relatedi am receiving error 0x80070570 at "expanding files" in the windows 7 installation at around 30% into it. Its an attempt to install windows 7 via boot-able usb flash drive.now something i should mention is that this is a completely new built computer, i built it a couple of days ago[CODE]
View 3 Replies View Related