Booting From Another Drive?
Aug 27, 2010
I had a failure to my system drive (was my fault). Anyhow the drive was still under warranty so I did an RMA with WD. While waiting for my replacement drive, I reinstalled Windows 7 to another HD and it is now my system drive. Now that my replacement drive have arrived, I image the other HD and restore to the replacement HD. My question is, how can I have it boot from the replacement HD?
What I did was mark the old HD as inactive and marked the replacement as active but when I boot up, it tells me it cannot find a boot device.
View 6 Replies
ADVERTISEMENT
Jan 16, 2013
When I am installing Windows (XP or 7), I first set the computer's CMOS to "Boot from CD ROM" first. Then I put the factory CD or DVD into the drive. Then I turn the machine on. After POST, I see the message "Press any key to boot from CD" and it continues. OK - that's normal
Now - let's do this: I copy the image of the bootable CD onto a flash drive. I then set the computer to "Boot from USB Flash drive" first. I install the flash drive. I turn the machine on. I never see the message "Press any key to boot from CD".
The computer's BIOS has several choices of "boot from flash drive" Which one do I choose? Question: Do I have to format the flash as a bootable? Is a simple "copy all" from a factory installation disk sufficient? Should I use a "clone' program to prepare the flash drive?
View 1 Replies
View Related
Aug 29, 2009
I am currently trying to install Windows 7 Professional RTM to my computer. After installing it onto my laptop, I followed the same exact steps to install the 64 bit version instead of the 32 bit on my netbook. A problem that occured is that when I go on the bios, there is several options to boot from, and none of them are working. I tried USB-CD, USB-FDD, USB-HDD and none are working... Does anyone have any suggestions?
View 9 Replies
View Related
May 6, 2009
My computer yesterday was an XP machine with one hard drive. I wanted to test Windows 7 but I was afraid I would screw something up with my XP drive in the process. We'll call this Drive A.
Yesterday I bought a new hard drive, Drive B. I downloaded the Windows 7 ISO, got some drivers, and turned off my computer. I physically removed Drive A from the computer and put Drive B in. I started the computer and put the DVD in. Setup was fine, I had some trouble with getting the onboard NIC to work but I was able to overcome.
Now I needed to get back into my XP install to get some stuff done (play video games). I shut my computer down, pulled out Drive B, put Drive A back in and booted up. But I got a boot error message, and it looks like it's a Windows 7 Boot error message. How can this be if I removed the hard drive.
0xc000000e
The boot selection failed because a required device is inaccessible
It's almost as if my computer is trying to boot to Windows 7 even though I removed the hard drive containing the operating system. How do I get into my XP system? The drive is fine, I connected it as a slave and I can access the files on there. I'm guess Windows 7 makes some kind of change on the motherboard that forces it to boot to 7?
View 1 Replies
View Related
Oct 21, 2011
laptop not booting on dvd or pen drive. i have tried a lot. my dvd drive is ok but not reading windows cd or any bootable pendrive
View 2 Replies
View Related
Oct 19, 2012
My friend asked me to fix her laptop, which has been failing to boot, getting as far as the blue Windows 7 login screen then hanging. The login UI doesn't load, it's just the blue background.I tried to re-install Windows from the boot disc, but when I put in the disc, I wasn't able to boot from it. Instead the computer booted from the hard-drive again and hung at the same place. This is after changing the boot priority in the BIOS.Since the laptop is out of warranty, and is to all intents and purposes a brick, I removed the Hard-drive, and connected it to my computer to see if I could reformat the drive from there. The thing that has really puzzled me though, is that my computer wouldn't boot when this hard drive was attached, despite running fine before I attached the drive, and after I removed it.
Which leads me to think there's possibly a really malicious virus or something on the drive, which makes it the default boot device, despite having a corrupted operating system installed that won't boot.
View 7 Replies
View Related
Nov 10, 2011
I'm using an HP laptop and made a bootable flash key with the Microsoft utility (which I downloaded from Microsoft) to make a Windows 7 installation. I (supposedly) changed the boot order in the bIOS to look first at the key. Didn't work - booted directly into Windows 7 (seemingly bypassed the bootable key).
1. How do I tell if the USB key is bootable?
2. What might be the reason(s) why my laptop won't boot from the USB key?
View 2 Replies
View Related
Jun 23, 2012
I was wondering if there are any issue with dual booting Windows 7 pro 64 bit on an internal SSD drive. I currently have Windows 7 pro 64 bit on a 500gb 7200 hard drive plus a backup 1 TB 7200 rpm drive; but I wanted the speed I would get by installing win7 pro 64bit on a 250gb SSD drive. I would basically only install specific essential software like Adobe Premeire Pro and Photoshop, among others. I originally was going to use the SDD drive as a scratch disc but after reading, I thought it might be better to just install Win7 on the SSD drive. This way I could also experiment with what would be the best configuration. I still get confused about scratch disc and how useful they are if you have plenty of memory.
View 9 Replies
View Related
Mar 21, 2011
Ok I have a emachine e725 running windows 7 32bit and a acer running on windows vista. My emachine recently crashed in the blue screen and I tried to complete a system restore. I was able to get through the advanced boot menu and use the repair your computer option to restore windows. During the windows setup process I got another blue screen and the computer restarting. It then started the process over and once it got to the step that says windows is preparing setup, it gives an error msg saying something along the lines of windows was interupted and needs to restart to complete installation, and it has an option to press ok. This cycle continues and I can not open in safe mode because it says "windows can not complete the installation in safemode. Also the option to repair your computer in the advanced menu options is no longer available. So after wrestling with windows starting up I decided to create a back up and restore disc on my acer for my windows 7 computer. I tried putting it on a disc but it would not boot. So I tried creating a installation disc of windows 7 and tried booting from the cdrom drive. Once I did that I got a error msg saying "device driver not found: MSCD001 No valid cdrom device drivers selected. It then gives me the A:>. Im not sure if I created the disc wrong since I cant unzip the entire file I downloaded with needing an encryption password.
View 9 Replies
View Related
Mar 5, 2012
Motherboard: Asus A8N5X
So after the hard drive fiasco that I reported in another thread, I got clever and decided to create an "Emergency Boot Drive" that would have Windows on it as well as some utilities for data recovery. I took one of the many old hard drives that I have floating around and plugged it into the computer AND unplugged my other two drives. Then I ran Windows Install off the DVD and installed Windows to the old drive. I installed my software. All was good. I plugged in the other two drives and tried to boot from the "Emergency" drive and it worked fine.Last step was to unplug the emergency drive from the motherboard, connect it via USB and try to boot. The BIOS sees the drive and I tell it to boot from the drive. So the computer is booting. The "Starting Windows" message comes up and then the system reboots. This happens everytime I try it.Does Windows reset the USB ports so that the drive suddenly vanishes?
View 9 Replies
View Related
Jun 13, 2012
In order to be able to Boot from a flash drive , I understand this ability must be enabled in ones system .I have a desktop and a new laptop in neither of which do I see this choice .I presume this is a choice originally installed on the m/b and it would not , therefore , be possible to use software to enable it ?
View 1 Replies
View Related
Jul 2, 2012
I had my old hard drive installed in my Windows 7 computer. It worked for several months but now it started booting from the old drive that still has Windows Vista on it. My simple fix has been to unplug that drive while booting it up. Can I just delete the Windows Vista files?
View 7 Replies
View Related
Jul 24, 2012
I have instlled windows 7 in my c: drive and booting files are stored in another drive(d: drive). Due to this problem im unable to store my important files in d: drive. If I save my important files in that drive whenever I want to chnge the OS I suppose to format the two drives c: and d: drives. so I may lost my important files.
View 3 Replies
View Related
Nov 8, 2012
It just shows the blue colour only but not recognized by laptop
View 1 Replies
View Related
Sep 14, 2012
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.
I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever.
Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB.
This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.
So I tried to manually set up the bootable flash drive, which also didn't work.
After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. [URL] I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive.
Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS) Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn.
Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, x64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 3063 Mb
Graphics Card: NVIDIA GeForce GTX 560, 1023 Mb
Hard Drives: C: Total - 476837 MB, Free - 132797 MB; E: Total - 234627 MB, Free - 205990 MB; F: Total - 234316 MB, Free - 233246 MB;
Motherboard: ASUSTeK Computer INC., P7P55D PRO
Antivirus: AVG Anti-Virus Free, Updated and Enabled
View 12 Replies
View Related
Sep 14, 2012
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever. Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB. This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.So I tried to manually set up the bootable flash drive, which also didn't work. After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive. Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS)Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn. Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
View 1 Replies
View Related
May 17, 2012
My operating system is giving out, i am locking up regularly now, i feel i have too many things installed on a vary small drive to pinpoint the problem. i have been neeeding a second hard drive for a while now, i think its time.The question is, how can i boot off of one hard drive, but install all my applications on the other, as if i where booting my OS off of a 30gb ssd, just big enough for the operating system, but actually installing things on my second hard drive.
View 9 Replies
View Related
Jan 5, 2010
I am trying to wipe my current XP installation clean and move on to Windows 7.
I first tried to install the setup.exe (Custom install option of course) from within the XP OS, but soon discovered you cannot do that and wipe out my only partition on C: at the same time.
I don't have a DVD-RW drive to write a boot disk, so instead I am trying to install through my external hard drive. I meticulously followed this tutorial from PC World yet when I instruct the PC in BIOS to boot from the external hard drive, I keep getting an "invalid system disk, press any key" error when the computer boots and looks for the setup files. This is despite the fact that setup seems to work perfectly from within the XP OS.
PC World tutorial:
Install Windows 7 From an External Hard Drive - PC World
Can anyone please offer me any helpful advice to get the external hard drive setup to work or help me find a way to install 7 from within XP?
Anyone know exactly why I keep getting the "invalid disk" error each time when I try to boot from my external hard drive? As mentioned in the PC World tutorial, I marked the external hard drive as an active partition and the setup files seem to work fine from within XP. If it helps, in the external hard drive root folder is both the Windows 7 ISO and all the files contained (which I extracted using PowerISO).
View 0 Replies
View Related
Feb 21, 2011
I have a laptop that has Vista installed on it. I have an upgrade disc for Windows 7 and I am thinking about performing a "clean installation" over the Vista OS - which I know is allowed, on the following link;click here Now, I would like to create another partition (on the same hard drive) and install Vista (using the same disc that it came with the laptop) onto that blank hard drive partition
View 10 Replies
View Related
Jun 16, 2011
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies
View Related
Aug 25, 2012
i am receiving error 0x80070570 at "expanding files" in the windows 7 installation at around 30% into it. Its an attempt to install windows 7 via boot-able usb flash drive.now something i should mention is that this is a completely new built computer, i built it a couple of days ago[CODE]
View 3 Replies
View Related
Aug 17, 2012
This week, I encountered the following strange problem for which I haven't found a final solution so far, though I have found some bandaids. But having a complete solution -or at least a reason why this problem occurs- would be great:I have a working installation of Windows 7 Professional x64 in UEFI mode. The main disk, SSD #1, contains the following partitions (using GPT): ESP, MSR, system, data. An additional disk, HD #2, with a single data partition (using MBR) is also attached to the system. With this setup, everything works fine.Now, after adding another disk, HD #3, to the system -my old system disk (bootable, using MBR, one active primary partition and an extend partition with three logical disks)- Windows will no longer boots completely: The boot process begins, the Windows logo is shown. Then, a message is shown in text mode "Windows is loading files" with a loading bar. After a while the boot process stops and I am dropped into the EFI shell. After removing the offending HD #3, Windows boots normally again.
I tried removing HD #2 and only attaching HD #3 together with SSD #1, but this yielded the same problem. Using SSD #1 by itself works fine though. Booting from a Linux live-cd works without problems. All disks and partitions are found and can be mounted. There, I erased the disk signature from the offending HD #3 and now Windows was able to boot and also found all disks and partitions correctly. But after a reboot the same problem reappeared
View 9 Replies
View Related
Nov 21, 2011
Dell M6500 laptop boots W7 to login screen. Display (and external display) goes dark, computer is unresponsive. From network, C drive is accessible. If I remote desktop into the machine, it runs fine. End the remote session and login local, crash within 2 minutes.
View 6 Replies
View Related
Feb 14, 2012
how do I disable message that come while booting s m a r t hard drive detect error!
View 3 Replies
View Related
Jun 19, 2012
Earlier xp but after win7 the booting not show xp at booting time
View 1 Replies
View Related
Jan 6, 2013
I have four physical drives in this system. Until last month, I was booting from a drive with three partitions, C:, D:, X:, where C:contains Windows 7 Pro; the others are data. The other physical drives are also data (not bootable). I added an SSD and cloned C: onto that drive with Acronis Trueimage. In order to get it to boot, I had to add an entry to the BCD on what should now be the old c: and keep that as the boot drive in my BIOS. I'd really like to NOT be reliant on that spinning drive to boot, so I found EasyBCD. Booted from the SSD, I told EasyBCD to designate c: as the boot drive.When I tell the BIOS to boot from the SSD, I get a Disk Read Error. So I go back to booting from the spinning drive.
View 3 Replies
View Related
Jan 15, 2013
Booting from USB instead of DVD, I wanted to boot from the USB instead of doing this from the DVD knowing that the DVD contains the Windows 7 Operating system. All what I did is copying the DVD to the USB.
I managed to give the USB the first option for booting, nevertheless, the machine doesnt respond to boot from the USB
What might be the issue? What should the USB contain to be bootable?
View 2 Replies
View Related
Oct 27, 2009
I guess the problem is related to the setup and installation process I'll leave it here, feel free to move the thread though.
I downloaded Windows 7 from DigitalRiver, made a bootable .iso, burned it and started the setup. I then formatted C: where Vista was located and had Windows 7 installed onto C:.
It works perfectly with the DVD inserted, but whenever I try to boot without the DVD the Bios says something like:
file:/windows/system32/winload.exe
status: 0xc0000428
Info: windows cannot verify the digital signature for this file
What I did now was to go to the setup and open up a command line and then I did chdsk /R which said the partition was NTFS, could not be locked and that it was read only.
Then I did ScanOs which gave me 0 installations found. Afterwards FixMbr and FixBoot which were "completed successfully" and last but not least RebuildBCD which said 0 was fixed but it was again completed successfully.
Long story short, nothing has changed. Still the same error.
Plus: After that message in the bios I can press either esc or enter. Enter will then get me another screen where I can choose the OS I'd like to boot and it only says Windows Vista there but that selection takes me back to the initial "digital signature blabla" screen.
So, is there still a little part of Vista left somewhere that messes up the boot process or what's up?
View 2 Replies
View Related
Jan 7, 2010
I have an acer laptop that i upgraded from vista to 32bit windows 7 which was installed a few months ago through my USB because my cd drive doesnt work. Now I am getting the unmountable boot volume blue screen error so I am trying to boot the installation from my USB. It gets past "windows is loading files", then it goes to starting Windows with the logo... but after that I get a black screen with just the mouse arrow.
View 9 Replies
View Related
Oct 15, 2009
Ok so i have created a VHD of my system (dual boot of xp and Windows 7) using Disk2vhd. It's now sitting on my USB HDD which i am able to create a new VM in XPM using that as a HDD. Turned on the VM and everything looks fantastic. Selected windows 7 boot and it booted fine. But when i go to boot Xp it just load and then goes black.
I think this is a restrictions on XPM not allowing to boot to a Xp VHD, Y/N?
View 2 Replies
View Related
Apr 22, 2012
Computer will not boot up bios check seems fine It shows a black screen can not get into F8. Im running win 7 home premium 64bit on an hp pavilion a1220n. I have tried a system restore from win boot disk will not restore. I tried start up repair and it cannot detect any problems
View 1 Replies
View Related
