I installed vista on my harddrive, and then made a partition and installed windows 7 on it.
I no longer want vista, and just want windows 7.
How would I go about deleting vista all together, and just have windows 7?
If I make the windows 7 partition active, it won't boot.
I have two drives (C and D) with Vista on one and Win 7 on the other (not sure if they're actual drives or partitions of a single drive, how do I tell?). I am dual booting and never use Vista. Starting to need the disk space and want to delete Vista. Is this difficult in this scenario?
View 2 Replies View RelatedI am dual-booting both x64 of Windows 7 Home Premium, and Windows Vista SP2 Home Premium, and dang, I dont understand how anyone can think 7 looks like vista..and speed?..vista has sluggish reactions compared to 7..more jerky graphics as well..
View 8 Replies View RelatedCurrently I have Vista 32 bit installed on my pc with the RC version of 7 installed on a 20gb partition. I recently bought the 64 bit version of 7 and am looking for a way to install it.
I want to keep Vista on my computer just in case a program or something isn't compatible with 7.
I was thinking that i would format the partition I currently have and move vista to that partition and then install 7 on the main partition.
Would this be the correct way to go about dual booting between a 32 and 64 bit operating system?
As an alternative to re-installing all my programmes etc. I have recently considered installing Windows 7.0 on one of my three harddrives. I understand that this is perfectly feasible, however, my main aim is to be able to address more ram, hence W 7.0 64 bit. Would Vista 32 still run happily with 8GB or more of memory in the mobo?The hd is 500 Gig.
View 10 Replies View RelatedI have a laptop that has Vista installed on it. I have an upgrade disc for Windows 7 and I am thinking about performing a "clean installation" over the Vista OS - which I know is allowed, on the following link;click here Now, I would like to create another partition (on the same hard drive) and install Vista (using the same disc that it came with the laptop) onto that blank hard drive partition
View 10 Replies View RelatedI posted here earlier (a couple weeks ago) about a painless installation of Windows 7 on a resized C Drive, which I partitioned into into a C Drive (Vista) and W Drive (Win 7).
All was fine until yesterday - I had been able to login into and out of both operating systems without drama - when out of the blue, for no apparent reason, whenever I try and log onto the Vista operating system, it allows me to logon as Rod with my correct password, but after the logon screen I get the "Preparing your Desktop" and and am presented with a Desktop and icons - but not for me! I get a bubble pop up out of the System Tray that says "Windows had trouble loading your Profile and has loaded up a temporary profile. Contact your administrator".
That would be me! I for the life of me don't know what happened. I have created no new users, nor amended any existing ones. Though, when using Windows 7 earlier in the day, I had to give access rights and permissions to All authenticated Users in order to access and use files on a separate (D) Drive.
Will this have screwed up my User Profile and login to Vista? How?
I currently have a standard computer setup with a windows 7 operating system installed. What I want to do is dual boot with Windows 7 as my primary os but using an esata cable connect the hard drive from my laptop to the computer and have this as a secondary boot option. The laptop hard drive has a full install of vista on it. Is this possible, every time I think about doing it I worry about the drivers on the laptop hdd and how those will react to my main computers hardware as obviously the laptop hardrive is setup to look at the laptop hardware.
View 2 Replies View RelatedI recently did an install of Windows 7 (a clean install) and accidenlty selected to dual boot somehow (I chose to install 7 on the D drive instead of C, where Vista is installed)
I do not want Vista anymore. How can fix this?
I am dual booting Vista and Windows7 RC 7100. They are both on the same Hard Drive on different partitions. I have made the decision to stick with the new OS (Windows7) and give Vista the boot. So I want to get rid of the extra partition and revert to a single OS (Windows7).
I don't want to reformat the whole hard drive and completely re-install the windows7 operating system. I want to remove Vista from the dual boot menu and keep windows7. Then I want to format the Vista Partition. How can I do this and keep my present installation of Windows7 without having to reinstall Windows7?
I have another laptop and its a HP 2230s. I originally installed Windows 7 professional 64bit. But I have swapped the ram into my Lenovo ThinkPad. So the HP now has 2GB. I created a new partition and installed Vista Business 32bit on it. When I started the install windows .exe program in Windows 7, everything went well until it rebooted. When I rebooted, windows said something like:
Windows Boot manager:
The system cannot boot because of a recent change to files/hardware. (Something like that). Insert your windows disk.
So I just rebooted my laptop with the vista disk inside and installed. After, when everything was working, I wanted to go to the Windows 7 partition to un-install programs and copy some files over to the vista partition, the laptop just booted into vista.
I downloaded the easy BCD editior and visual BCD editor. (in the vista partition), I clicked the auto fix in visual BCD editor. It detected my windows installations. At the boot screen, I can select either Windows 7 or Vista. But when I select 7, the same error message appears.
Then I rebooted my laptop with a USB containing the Windows 7 (64bit) recovery tools. After, I don't have the message again. But when it goes to the starting windows animation, it stops halfway and it gets a BSOD. I tried debugging mode, it worked.
I found out that the larger partition, (Windows 7) is the C: drive. But when I boot into the smaller partition, (Windows Vista), the drive is also C:!. So I don't know what I could do.
I insert the windows 7 disk and repaired my installation, it just boots into windows 7. But when I insert the Vista disk and repaired my installation, it just boots into Vista!
My system dual boots to either Windows 7 or Vista Ultimate, or, at least it is supposed to. Something happened and now the system just boots to Winodows 7 without giving me the choice to boot to either. When I use F6 I find that only Windows 7 is listed in the Operating Systems box.
View 1 Replies View RelatedNew laptop has Windows 7 Home Premium 64bit. I have two business programs that won't run on a 64bit system. Partitioned the hard drive to install Vista Home Premium 32bit to create a dual boot system solely to run these two programs.Can't get Vista to load. Followed tutorial meticulously. All goes fine until the "Vista will boot for the first time" step. After this first boot, the screen returns to the "completing installation" page. However, the process dies here and the progress bar across the bottom of the screen never moves, even after an hour. Reformatted the partition and started over with same results. Multiple attempts always die after the first boot.
View 9 Replies View RelatedI had recently installed windows 7 on my laptop running windows vista. I did not remove the existing windows vista installation, and thus win 7 was installed in a dual boot combination. Now, i want to remove vista from my laptop and use windows 7 only.The problem is that during installation, win 7 was installed on logical drive and windows vista was on the primary drive. Thus, i cannot delete/format the windows vista partition. Also I cannot transfer the boot drive to the partition containing win 7 because the vista partition is the active one.
View 6 Replies View RelatedI have dualboot XP SP3 and Vista Ultimate on my system,,and now i want to install Windows 7 over the XP OS. I wish to keep Vista with Windows 7 without reinstalling Vista.
Can I just install Windows 7 over XP , or should i be careful for MBR,or boot....
A few weeks ago my old Lenovo computer died. I took the HD out and it worked OK in another computer. I then bought a new HP with Windows 7 64 bit. Everything fine except lazy greedy Canon do not produce drivers for my existing scanner for 64 bit, only 32 bit. I have wasted a lot of time trying other drivers, work arounds and expensive memory hogging simulation programs. Howvere, I saw a case I can put my old HD into in a shop the other day. What I am wondering now is if it is possible to do this, plug in it and then boot my old system on those occasions I need to use my scanner?
View 7 Replies View RelatedI am currently trying to install Windows 7 Professional RTM to my computer. After installing it onto my laptop, I followed the same exact steps to install the 64 bit version instead of the 32 bit on my netbook. A problem that occured is that when I go on the bios, there is several options to boot from, and none of them are working. I tried USB-CD, USB-FDD, USB-HDD and none are working... Does anyone have any suggestions?
View 9 Replies View RelatedI have this machine that was dual booted with XP and Win 7. Everything was working gravy. I put up the RC on the machine and now I get NTLDR erros when trying to get into XP.
Physical setup is as folows:
Sata Drive with three partitions (XP, Storage, Storage 2)
IDE drive with One partition (Windows 7)
Boot order is Sata, then IDE.
The boot loader comes up and I can get into windows 7 no problem, but when I choose the XP I get NTLDR errors.
I redid the boot loader with easybcd, but I still get the errors, I've copied NTLDR and NTDETECT.com on just about every drive except my card reader (haha).
Can someone walk me through getting XP booting again? I tried doing the /fix mbr thing but I can't remember the password for the XP install to get into the recovery console.
I have a 2005 Windows Vista, and it may seem old, but I need to for school. When I start up my laptop it does the normal loading screen, then a different screen appears.
[code]...
This computer orignially had Windows 7 installed on it. I have just now installed XP on a second partition. I was expecting bootmanager to come up every time I booted, asking for either XP or 7. To my suprise, it boots straight onto Windows XP. how to modify msconfig (via XP) to add the W7 boot?
View 5 Replies View RelatedI have XP and considering having a dual booting system. I'm a bit confused as to whether I need an upgrade version of Windows 7 or a "full version," since they will be on different drives. I'm further confused having read that when up upgrading from XP to W7 using upgrade software, its necessary to do a clean install. Isn't a clean install the same as installing from scratch and therefor a full version of W7 is required?
View 5 Replies View RelatedWhat would be the easiest way to do a dual boot? Would it be:
1)Use a second hard drive, one with XP one with Windows 7? If I did this would I be able to plug the XP drive in and see it as my D: drive? What if I went and switched it back in the bios to the XP hard would I see windows 7 stuff in D:? I’d like to do this since I have two hard drives one that is brand new.
2) Just partition my current hard drive and dual boot. If I did this would I be able to switch back and forth and see files on both boots? Also what about if I added my other new hard drive would both see it easily?
I don’t know much about dual boots so please fill me in and answer my questions.
I would like to dual boot Windows 7 and Mac OS X 10.6 on my Macbook Laptop. I want Windows 7 to be the main OS on the laptop with the Mac OS on a smaller partition. I've done dual booting before but never on a Mac.
View 2 Replies View RelatedI currently have Windows 7 Ultimate 64bit installed on my computer on a SSD drive, and I'm trying to install Windows Server 2003 on a second hard drive (regular SATA II HDD).When I boot with the Windows Server 2003 CD, everything seems to be fine... it pops-up the usual blue screen and the drivers are loading, but once the drivers are done loading, I get this error message:"A problem has been detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical informaiton:
*** STOP: 0X0000007B (0XF789EA24, 0XC0000034, 0X00000000, 0X00000000)"
why this message pops-up and prevents me from installing Windows server 2003? Is it possible to have a dual boot with Windows 7 and Windows Server 2003?
I have found guide for dual booting Windows 7 with XP or Vista already installed, but not the other way around.
I allocated some free space from my C drive for the XP install. I installed XP, but when I restarted my computer, I got this error, "A disk read error has occurred; press Ctrl-Alt-Del to restart dual boot".
What am I doing wrong?
I'm considering buying an XP installation CD/license. Are these still available? And if so, what's the price? And also, how would I go on about dual booting? I heard you have to shrink your partition to fit the XP installation on (because I only have one hard drive). Is there a tutorial that tells you? Sorry if this all sounds a bit newbish, but I'm not too experienced with this part of computing even though I reformatted my PC about 3 times.
View 9 Replies View RelatedJust what the title says, how do I set up dual booting between Windows 7 Home Premium 64 bit and Windows XP MCE 32 bit, with both OSes already installed on two separate HDDs. It has been suggested that I use EasyBCD to add the XP MCE entries to the Windows 7 boot menu. It has also been suggested that when I want to boot into the XP MCE drive, that I change the boot order in the BIOS. Would this still screw up the MBR for Windows 7?
View 4 Replies View RelatedI have Windows 7 64 bit installed. I need to dualboot and add Windows XP 32 bit. How would i go about doing this?I know i need to make a new partition on the harddrive, i'm going to make a 50 GB one right now.
View 9 Replies View RelatedBackground: I use my computer for 2 reasons. One is for general (internet, MS office, etc...) The other is for serious Digital Audio recording using Cakewalk Sonar and 100's of plugins and effects. My xp systems I have always dual booted xp with xp. One for fun and one for music. XP system for music was tweaked and optimized for music (no internet, no email etc.)
My Problem. I bought the Family pack (3 Pc's) upgrade knowing that I would install at least 2 versions of Win 7 on my computer.
My first installation (Sunday) went fine and was installed on the 500 GB HD. Startup was fast. On Monday night I bought another HD (750 GB) and installed another version of Win 7 on the new harddrive for my music stuff. It was working fine. 2 new versions of Win 7 on new brand new sepatate HD's.
Yesterday (Tuesday), I got home and booted up to Win 7 Music system and was told to run chkdsk which it does and noticed the startup was much slower once it rebooted. So I try to install some of my music programs and I get an error that the file system is now corrupt. I cannot install programs or even copy things from another drive to that partition. When I tried to install programs another thing that popped up was an error about finding something in the Temp directory. I ran chkdsk 3 times and it did not fix the problem.
Appartently my 2nd version of Windows 7 has been corrupted. Or the file system has been corrupted. I can run the few programs I installed on Monday night but I can not install new ones. Has anyone installed two working versions of Win 7 on the same computer (separate partitions) and run into any problems? Any ideas? With the power of Win 7 and my new computer do I even have to worry about separate operating systems for General Use and Music Use?
Is it possible to dual boot Windows 7 Pro, one partition being a 32 bit system, and one being a 64 bit? I have a program that just won't run on 64 bit, and my processor doesn't allow for Virtual PC, so can I have a separate partition with 32 bit Windows 7 Pro running?
View 9 Replies View RelatedI am going to dual boot Windows 7 (Home Premium) using a separate new Hard Disk Drive, with XP already installed on the old existing Hard Drive and using the instructions in this link:-
Dual Boot Installation with Windows 7 and XP
As it is the first time I have tried something like this could someone answer a couple of questions for me?
1: The XP drivers (Chipset, Graphics, LAN, Audio etc.) and an Antivirus, together with any required software/programs, are already installed on the original XP HDD.
When I have installed Windows 7 on the second/new HDD, do I then boot the Windows 7 OS and install the Windows 7 drivers (Chipset, Graphics, LAN, Audio etc.) and an Antivirus together with any software I want to run on Windows 7 (even if that software was already installed previously for XP?) It seems funny having two sets of drivers (XP & Win 7) and Antivirus on the one machine.
2: XP runs all the programs that I need and I am just trying out Windows 7 at the moment so Win 7 restore points are not very important to me.
If that is the case, can I just ignore the fact that XP may delete the Win 7 restore points, in a dual boot, and not bother with the procedure (explained in the above link) to prevent this from happening?
To stop XP from deleting your Windows 7 System Restore Points everytime XP is started, then see System Restore Points - Stop XP Dual Boot Delete to hide Windows 7 from XP. I intend to drop XP and move over to Win 7 eventually so this will just be a temporary setup. Many thanks for any replies.