I am going to dual boot Windows 7 (Home Premium) using a separate new Hard Disk Drive, with XP already installed on the old existing Hard Drive and using the instructions in this link:-
Dual Boot Installation with Windows 7 and XP
As it is the first time I have tried something like this could someone answer a couple of questions for me?
1: The XP drivers (Chipset, Graphics, LAN, Audio etc.) and an Antivirus, together with any required software/programs, are already installed on the original XP HDD.
When I have installed Windows 7 on the second/new HDD, do I then boot the Windows 7 OS and install the Windows 7 drivers (Chipset, Graphics, LAN, Audio etc.) and an Antivirus together with any software I want to run on Windows 7 (even if that software was already installed previously for XP?) It seems funny having two sets of drivers (XP & Win 7) and Antivirus on the one machine.
2: XP runs all the programs that I need and I am just trying out Windows 7 at the moment so Win 7 restore points are not very important to me.
If that is the case, can I just ignore the fact that XP may delete the Win 7 restore points, in a dual boot, and not bother with the procedure (explained in the above link) to prevent this from happening?
To stop XP from deleting your Windows 7 System Restore Points everytime XP is started, then see System Restore Points - Stop XP Dual Boot Delete to hide Windows 7 from XP. I intend to drop XP and move over to Win 7 eventually so this will just be a temporary setup. Many thanks for any replies.
1) I currently am running Vista on a laptop on which it is the only OS. I want to install 7 on a second partition for dual boot. However, to keep things tidy, I would like to make Windows 7 Drive C: (which currently contains Vista). Is there a way to image the hard drive then reload it onto drive D: after I install 7 on C:?
2) I guess my other option is to install 7 on the formatted HD, then create a D: partition to run the Vista recovery disks on at least that would restore my drivers, etc. But I really wanted to keep my current configuration around for those programs that are slow to catch on to the new OS. (Or do I even have to worry about this?)
3) If all this dual boot stuff is too complicated or if I really don't need to worry about the driver/software compatibility, I might just do away with that idea and clean install it on the C: drive and forget about Vista. (reluctant to do so since I rely on this computer for school). I will be keeping my C: drive image that I took yesterday so taht I can recover to Vista if need be.
Edt: 4) I just had anther thought. If I install Win 7 clean could I then take my Vista hard drive image and make it into a VHD? that would pretty much solve all my troubles I think. Unless I would need to reinstall Vista onto the VHD.
I have this machine that was dual booted with XP and Win 7. Everything was working gravy. I put up the RC on the machine and now I get NTLDR erros when trying to get into XP.
Physical setup is as folows:
Sata Drive with three partitions (XP, Storage, Storage 2)
IDE drive with One partition (Windows 7)
Boot order is Sata, then IDE.
The boot loader comes up and I can get into windows 7 no problem, but when I choose the XP I get NTLDR errors.
I redid the boot loader with easybcd, but I still get the errors, I've copied NTLDR and NTDETECT.com on just about every drive except my card reader (haha).
Can someone walk me through getting XP booting again? I tried doing the /fix mbr thing but I can't remember the password for the XP install to get into the recovery console.
This computer orignially had Windows 7 installed on it. I have just now installed XP on a second partition. I was expecting bootmanager to come up every time I booted, asking for either XP or 7. To my suprise, it boots straight onto Windows XP. how to modify msconfig (via XP) to add the W7 boot?
I have XP and considering having a dual booting system. I'm a bit confused as to whether I need an upgrade version of Windows 7 or a "full version," since they will be on different drives. I'm further confused having read that when up upgrading from XP to W7 using upgrade software, its necessary to do a clean install. Isn't a clean install the same as installing from scratch and therefor a full version of W7 is required?
I am dual-booting both x64 of Windows 7 Home Premium, and Windows Vista SP2 Home Premium, and dang, I dont understand how anyone can think 7 looks like vista..and speed?..vista has sluggish reactions compared to 7..more jerky graphics as well..
What would be the easiest way to do a dual boot? Would it be:
1)Use a second hard drive, one with XP one with Windows 7? If I did this would I be able to plug the XP drive in and see it as my D: drive? What if I went and switched it back in the bios to the XP hard would I see windows 7 stuff in D:? I’d like to do this since I have two hard drives one that is brand new.
2) Just partition my current hard drive and dual boot. If I did this would I be able to switch back and forth and see files on both boots? Also what about if I added my other new hard drive would both see it easily?
I don’t know much about dual boots so please fill me in and answer my questions.
I would like to dual boot Windows 7 and Mac OS X 10.6 on my Macbook Laptop. I want Windows 7 to be the main OS on the laptop with the Mac OS on a smaller partition. I've done dual booting before but never on a Mac.
I currently have Windows 7 Ultimate 64bit installed on my computer on a SSD drive, and I'm trying to install Windows Server 2003 on a second hard drive (regular SATA II HDD).When I boot with the Windows Server 2003 CD, everything seems to be fine... it pops-up the usual blue screen and the drivers are loading, but once the drivers are done loading, I get this error message:"A problem has been detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
why this message pops-up and prevents me from installing Windows server 2003? Is it possible to have a dual boot with Windows 7 and Windows Server 2003?
I have found guide for dual booting Windows 7 with XP or Vista already installed, but not the other way around.
I allocated some free space from my C drive for the XP install. I installed XP, but when I restarted my computer, I got this error, "A disk read error has occurred; press Ctrl-Alt-Del to restart dual boot".
I'm considering buying an XP installation CD/license. Are these still available? And if so, what's the price? And also, how would I go on about dual booting? I heard you have to shrink your partition to fit the XP installation on (because I only have one hard drive). Is there a tutorial that tells you? Sorry if this all sounds a bit newbish, but I'm not too experienced with this part of computing even though I reformatted my PC about 3 times.
Just what the title says, how do I set up dual booting between Windows 7 Home Premium 64 bit and Windows XP MCE 32 bit, with both OSes already installed on two separate HDDs. It has been suggested that I use EasyBCD to add the XP MCE entries to the Windows 7 boot menu. It has also been suggested that when I want to boot into the XP MCE drive, that I change the boot order in the BIOS. Would this still screw up the MBR for Windows 7?
I have Windows 7 64 bit installed. I need to dualboot and add Windows XP 32 bit. How would i go about doing this?I know i need to make a new partition on the harddrive, i'm going to make a 50 GB one right now.
Background: I use my computer for 2 reasons. One is for general (internet, MS office, etc...) The other is for serious Digital Audio recording using Cakewalk Sonar and 100's of plugins and effects. My xp systems I have always dual booted xp with xp. One for fun and one for music. XP system for music was tweaked and optimized for music (no internet, no email etc.)
My Problem. I bought the Family pack (3 Pc's) upgrade knowing that I would install at least 2 versions of Win 7 on my computer.
My first installation (Sunday) went fine and was installed on the 500 GB HD. Startup was fast. On Monday night I bought another HD (750 GB) and installed another version of Win 7 on the new harddrive for my music stuff. It was working fine. 2 new versions of Win 7 on new brand new sepatate HD's.
Yesterday (Tuesday), I got home and booted up to Win 7 Music system and was told to run chkdsk which it does and noticed the startup was much slower once it rebooted. So I try to install some of my music programs and I get an error that the file system is now corrupt. I cannot install programs or even copy things from another drive to that partition. When I tried to install programs another thing that popped up was an error about finding something in the Temp directory. I ran chkdsk 3 times and it did not fix the problem.
Appartently my 2nd version of Windows 7 has been corrupted. Or the file system has been corrupted. I can run the few programs I installed on Monday night but I can not install new ones. Has anyone installed two working versions of Win 7 on the same computer (separate partitions) and run into any problems? Any ideas? With the power of Win 7 and my new computer do I even have to worry about separate operating systems for General Use and Music Use?
Is it possible to dual boot Windows 7 Pro, one partition being a 32 bit system, and one being a 64 bit? I have a program that just won't run on 64 bit, and my processor doesn't allow for Virtual PC, so can I have a separate partition with 32 bit Windows 7 Pro running?
Alright, so I know this an XP issue. But what I've noticed with build 7000 and now 7068, is that when I load up my computer and boot Windows 7 the sound works fine in 7. However when I go back to XP after having been in 7 ocassionally the sound is gone. I have a volume icon in my system tray and I can adjust the levels but no sound.
The only fix I have found for this was uninstalling my audio driver in XP and rebooting my PC and having XP find and install the driver itself. But even then sometimes it doesn't work and I have to do countless reboots before I could get the sound working again.
At the moment I'm dual booting XP & win7 32bit (7000) on different C & D partitions (same drive).
First Q? would there be a problem dual booting xp & win7 RC, 32 & 64bit together?
Q2, can I still install the win7 RC by mounting the image from XP (as i did with the earlier version)?
Q3, would I be better to format my D partition first from XP before mounting the image of the RC. ( because it still holds the old version of win7 on it)
or just mount win7 RC & let that do the formatting itself?
Currently I have Vista 32 bit installed on my pc with the RC version of 7 installed on a 20gb partition. I recently bought the 64 bit version of 7 and am looking for a way to install it.
I want to keep Vista on my computer just in case a program or something isn't compatible with 7.
I was thinking that i would format the partition I currently have and move vista to that partition and then install 7 on the main partition.
Would this be the correct way to go about dual booting between a 32 and 64 bit operating system?
I originally had Vista on this PC and then dual booted it with win7pro. I'm upgrading my 2x 250GB to a single 2TG drive and will use the 2x250G for something else. To prepare for the transition to the 2TB I deleted the repartitioned and reformatted the HD vista was on. It will boot into win7pro if I have the win7pro DVD in the DVD drive. If it isn't I get no system disc error during boot. I had boot problems before but those times it was missing such and such file like BOOTMGR or NT something. Anyways the last time it was recommended to use EasyBDC. I'm sure EasyBDC can be used to solve this boot problem too I just don't know exactly what to do. The automatic boot recovery feature of the win7pro DVD doesn't solve it but then that feature has never solved the boot problems I had in the past either.
When EasyBDC first opens it sees win7pro on drive C: and lists no other entries.Under edit boot menu it shows only win7pro as I expected the check box to the right of it is checked and default is indicated "yes". I selected skip boot menu since it is the only OS choice now and clicked save. I went to BCD backup/restore section and selected change boot drive, clicked preform action, and chose C: and proceeded. Eventually a message came up and said it completed and to reboot. I still have the message no system disc unless the win7pro DVD is in the DVD drive.
I was wondering if there are any issue with dual booting Windows 7 pro 64 bit on an internal SSD drive. I currently have Windows 7 pro 64 bit on a 500gb 7200 hard drive plus a backup 1 TB 7200 rpm drive; but I wanted the speed I would get by installing win7 pro 64bit on a 250gb SSD drive. I would basically only install specific essential software like Adobe Premeire Pro and Photoshop, among others. I originally was going to use the SDD drive as a scratch disc but after reading, I thought it might be better to just install Win7 on the SSD drive. This way I could also experiment with what would be the best configuration. I still get confused about scratch disc and how useful they are if you have plenty of memory.
I am not 100% sure if i should be posting this here or not but ill just continue. Okay so i have a Dell infinion 15r-n5110 laptop. a couple days ago i dual booted up with fedora 17. i self partition the 1TB hd. i left the partition for windows 7 unscathed. ever since then windows 7 has not been able to ping my home broadband connection. i have personaly changed the DNS server to serveral addresses i have found on dozens of other forums but nothing helps me. i cant access a router to easy but i did at work finally today and even with the cable plugged in it will not ping in windows 7. however both wifi card and the wired connection work just fine in fedora. i am thinking its something to do with the boot processes not initalizing. i have downloaded and reinstalled the drivers off the intel website for the wifi netword device (Intel Corporation Centrino Wireless-N 1030) and it still will not let me ping, i even went as so far as to turn off my firewall thinking it was a security issue and tryed to ping. still no luck. im hoping i have provided enough details and trial and errors for someone out there to give me something useful.
As an alternative to re-installing all my programmes etc. I have recently considered installing Windows 7.0 on one of my three harddrives. I understand that this is perfectly feasible, however, my main aim is to be able to address more ram, hence W 7.0 64 bit. Would Vista 32 still run happily with 8GB or more of memory in the mobo?The hd is 500 Gig.
I have Windows 7 64-bit and I want to install Windows XP 32-bit for extra cross-compatibility. I know 32 bit apps can work in 64 bit but I also need my printers and other devices working.
I need help with a guide to dual-boot operating systems but I can't find a guide that includes Windows 7 as the first operating system. Could anybody help me by pointing me in the right direction?
This is what I am attempting...I want some time to learn Win 7's ins and outs...before committing to it. I know how to dual boot...don't want that. If I set up like this image, will I be able to use the F8 boot menu to choose the HDD I wish to boot from...or will I just have to disconnect the XP drives and only connect the Win 7 drive. I want to keep the MBR's totally separate.
I see THREE possibilities:
1. F8 will work and just not SEE the other Windows install...which is fine.
2. F8 will work and Win 7 will try to take over all three drives.
3. F8 will work, but when booted to the Win 7 HDD, will wreak havoc with the drivers, IF it sees the other install.
this is the scenario: i have windows7 installed on a single partition 500 gb hd. i want to install ubuntu as dual boot. (i have done this before but not with Windows 7.) can i go into disk management and reduce the win 7 volume by say 50 gb. format it fat32 and install ubuntu. and still have dual-boot? thanks in advance. i plan on using either ubuntu 9.04 or 9.10.
I have been dual booting XP Pro 32-bit and Vista Ultimate 64-bit for some time now but haven't really found a good way to delete XP Pro (my first installed os) leaving my Vista os able to boot up normally. I have scoured the forums and was about to delete a lot of files from the XP partition but leaving the loader files and root files alone. This would enable me to free up a lot of drive space. Currently the 2 os's reside on a RAID setup one partition for XP and another for Vista.
OK so I have found the Windows 7 forums and thinks that it would be good idea to replace XP with Windows 7 but the upgrade options for the Beta do not allow upgrade to Windows 7 from XP.
If I upgraded XP to Vista 32-bit what would happen to my boot files etc etc and could I then further upgrade to Windows 7 leaving that and Vista 64-bit dual booting together?
Or is this a complicated way to do things?
What I really want to do is delete XP Pro - I am rather fond of Vista now and seems very stable. But I do not want to be faced with boot problems after deleting.
I currently have installed on both os's, Acronis's OS Selector and BCD Edit.
I really need a very accurate method rather than a theoretical answer - someone who has done this successfully please. I have spent too long wading through forums looking for a way of successfully deleting XP and receiving maybe this will work or maybe that type of answers.
i've got a macbook running Windows 7, and i want to dualboot it and get osx back on there. should be easy, osx on a macbook, right? **** me.
i did a bit of homework first, and reviewed what other people have done for dualbooting, but all of the threads are ancient and address different specific issues so here are the steps i went through:
-created a second partition in Windows 7, ntfs, made it active
-rebooted with an authentic osx snow leopard disc
-osx installation startup began
-went into disk utility to format it to "journalled" and get this error: "Volume Erase failed with the error: Could not modify partition map"
it won't let you install until the disk is formatted correctly..
I just built a new system and I'm moving on to installing the OSs. I would like to dual boot Ubunto and Windows 7 Home Pro (both 64 bit). I've never done this before and I'm a little nervous about partitioning the drive. I've been reading this how-to on Lifehacker as a guide but I'm still unsure of how best to size the partitions of my 1TB drive. I'll primarily be using Win7 and running a fair number of apps on that platform while Ubuntu is primarily being installed as my first foray into playing with Linux. Any direction would be welcome.
I installed Fedora on my system preinstalled with windows 7. Now during booting Windows 7 is not appearing. It is only showing Fedora. But it should show both the os and allow us to choose.
