I have a compaq presario that keeps showing this. I put another HDD in and it is saying the same thing. Does it mean the old HDD was buggered and I need to do something to the new one to sort out boot order or anything? or is this not a HDD issue. I have two broken compaq presarios here. One with no screen working and one saying no bootable disk drive.
View 5 RepliesI am about to buy a new internal hard drive for my laptop, and want to do a clean install of Windows 7. My laptop came with XP, but I did an online upgrade to Windows 7 (student edition) Professional.
How can I create a bootable Windows 7 disk so when I put my new hard drive in my computer, it will setup Windows 7 for me? I also don't have any old XP disks because my laptop didn't come with any.
I looked on my C: Drive but couldnt find any .iso files or anything like that?
i want to create another partition, which can be bootable. so that i will be able to boot from ubuntu as well as windows 7....
View 3 Replies View RelatedHow to full format my laptop hard drive. I have already Re install windows 7 in E: drive. Previously I have win-7 in C: drive after encounter some problems, Re-install new Windows 7 but that time I didn't format the hard disk that's why its install in drive E. Now when start the up of the lap top both selection are coming will start with old win or new win-7...and having some trouble with my windows 7 that's why I want to full format the hard dive without bootable disk and install new win-7.
View 2 Replies View RelatedTo improve the reliability of my system, I bought an identical second hard drive, which Windows 7 recognized. I then used a CD-based cloning program to clone the second drive to be identical to the first. If I disconnect the first drive, I can successfully boot from the second drive. With both drives connected, I can boot from the first and the BIOS recognizes both drives, but Windows does not see the second drive. Can I fix this so that Windows recognizes both drives?I plan to run the cloning program once a week. Is there a better way? My computer has RAID available, but the backup disk is not bootable.
View 2 Replies View RelatedMy friend just tried to start his laptop,and this came up? What is wrong? What must he do?
View 1 Replies View Relatedi'm going to flash my bios to a newer version with DOS, but i'm not sure how to make a DOS-bootable DISK?
View 9 Replies View RelatedI come with cap in hand and head bowed in shame at this, my first post - after so many months reading the knowledge that so many of you seem to have.
I seek your help if you would please. After downloading at 45k all day what I believed (and still believe to be!) was the iso image of the RC, I (merely?) have the RC content that I need to create a bootable disc.
I have used Bart's BBIE to extract a boot image file from my previous W7_7068 disc and I now have 'image1.bin' at 2k.
But from here? - How and where do I merge this bin file with my W7_RC content? (I'm using 'CDBurnerXP').
Call me a 'noob'or call me a 'knob', either way I'll cop it sweet.
I download a software, it has iso file. Because I have no CD-ROM, I want to make it to a USB bootable disk and boot this software from USB, rather than. install it on my hard drive. Can Everyone help me?
View 4 Replies View RelatedI own a Dell xps M1530 with a: 2.0 ghz dual core processor, 3gb of RAM, and (currently) a 360gb 7200rpm hard drive. I have purchased Windows 7 professorial 32bit to upgrade from Vista. Not shortly afterwards my hard drive started to go so I bought a new one(better on of coarse) I want to upgrade the RAM in my laptop to 8gb and I need a 64bit os to do so. I now am using Ubuntu 64bit on my laptop until I install windows. I have legally got the installers for the 64bit version of Windows 7 professional. I am planning on using the same key for the 64bit version which after research I believe will work. Right now I am having problems installing 7. I would really like to not have to waste a DVD to install it. I used some Microsoft utility to extract the ISO to a thumb drive which, I believe is bootable in the purpose of installing 7. Every time I try loading the os from the Thumb drive I get this error message:
Error: Unknown file system
Grub Rescue
Also, the Setup.exe file for installing windows doesn't seem to run under a linux operating system even with wine.
I recently purchaced a new notebook, shipped with Windows 7 64-bit HP. I need 32-bit in order to run certain programs, so I used my Windows 7 Ult DVD and installed it on this laptop. I did not delete the recovery partition that was already on the drive, but I re-installed my own Windows 7 on the partition with the pre-installed Windows 7. This was a mistake... I lack a lot of drivers and pre-compiled software that is not available for download from the manufactor. So, I hope there is a way to make the recovery disk bootable, so I can boot from it in order to respawn the pre-installed Windows 7.
View 3 Replies View RelatedI have my Windows 7 Pro install disk which does not have SP1 on it. I have Roxio Creator and I want to create an bootable disk image with Windows 7 Pro and SP1 so when i install Windows 7 it was also install SP1. Can I do this with Roxio Creator or will this take something else?
View 1 Replies View RelatedI have an .iso and a notepad instruction. I'd like to make an .iso a bootable disk. How can I burn the .iso (bootable) and the notepad instruction in one disk. What burning software do I have to use?
View 6 Replies View RelatedI installed a second HDD and installed Win 7 onto it and then t/f all data from the original VISTA HDD over.Been running just fine for a few months. Decided to remove the old VISTA drive and now I get "no disk" error when I bootI assume that the boot files reside on the old VISTA drive as I used to get the boot manager screen asking which OS to boot.What is the easiest way to make the Win 7 disk bootable now?
View 9 Replies View Relatedthe hard drive failed... i like to install an external hard drive. I have inserted the recovery CD...removed the failed hard drive yet the error stops to recover
View 1 Replies View RelatedI have an HP dv5 notebook PC with windows 7 (64bit) I3 cpu m330@2.13 ghz. I recently had to wipe my hard drive due to a virus. I bought this 2nd hand and wasn't provided any disks. I do have a Dell re-installation DVD with the same OS. I realize this disk won't install my drivers but was hoping there was a way i could install just the OS and download the drivers after. I do have the original product key for the HP. Now when i start up it says "No bootable disk-- insert boot disk and press any key" or "Media test failure, check cable". Even with before mentioned re-installation disk inserted. When i goto Setup Utility: Diagnostics and run the Primary Hard Disk Self Test and the memory Test it Passes both. When i go to System configuration (f10) this is what i see[CODE]
View 2 Replies View RelatedI have a laptop with Windows 7 Ultimate as the bootable C: drive and wish to add a 2nd bootable drive using a caddy holding the 2nd HDD in a modular bay. If I wish to install Windows XP on the 2nd HDD it will presumably be configured as the D: drive and all the programs installed on it will adopt the assignation as being on D: Am I correct in assuming that if I swapped this drive into the main laptop drive bay most or none of the programs would work as their configuration would not be set up for a C: drive? I would prefer to get the 2nd bootable OS on the drive in the caddy as it will save constantly having to remove the C: drive and swap it with the 2nd drive. I am sure this is a fairly common issue, it's just that I have never set up this type of configuration before.
View 7 Replies View RelatedI'm making a bootable thumb drive with all the best recovery and testing tools I can think of. Problem is I cant think of any other tools to put on it.
So far I have Hiren's boot cd, ubcd, ubcd4win, XP install disk image (dunno if the xp works yet), clonezilla, ubuntu, and orphcrack.
Anyone else have any ideas on other disks I should put on there or favorite tools?
How to make pen drive as bootable.I tried with several open source applications but I am getting target device not found.my system USB and pendrive both are working condition.
View 5 Replies View RelatedI have a computer with two drives, both of them have a licensed version of Windows 7 installed. My problem is that the boot dirve is installed on the large hard drive (1 TB) and I need be able to boot off of my small ssd drive so that I can replace the 1 TB with a 3 TB. how can i make ssd drive bootable with out re-installing windows and redoing all of my settings, and programs.
View 4 Replies View RelatedI had XP and Vista installed on my primary SATA hard drive (on SATA0 channel). There was no space for another operating system, so I added a secondary hard drive (to SATA2 channel) and installed Windows 7 to it. It worked perfectly. After a few weeks my old primary hard drive suddenly died, and the computer doesn't boot anymore. So I put the remaining live hard drive to SATA0 channel, and bought another new SATA drive and put it to SATA2 channel. Now I need to add boot files to my drive, because both operating system and data files are there, I just need to let the computer start.
So I have one good healthy SATA drive, Windows 7 installed on it, but without boot files, because that other (now dead) drive was used to start up the computer. I though that Windows 7 Installation DVD will help, but it doesn't. When I try to use its repair disk feature, it fails to find any installed Windows, so it says there's nothing to boot to, nothing to reapir. If I use the command line utility from the same DVD, I can see both my C: and D: partitions are there, with all files, I can see all my directories, I can see Windows folder, Program Files folder etc. But what does it need to boot?
I also tried "upgrade" from W7 Installation DVD, but it says that I should run this option from inside Windows. Since I cannot start the Windows, this option isn't for me. When I tried a new fresh installation, I got a warning that all my current data will be overwritten, and that also isn't option I am searching for.
Learn how to make any bootable CD or DVD bootable on a USB flash drive. This process allows you to quickly and easily create bootable USB flash drive copies of important software, such as Microsoft Windows, firmware update utilities, and various Linux operating system distributions. Most CDs and DVDs that are bootable in a native environment can be made bootable on USB with the Universal USB Installer utility by Pen Drive Linux.See: Universal USB Installer - Easy as 1 2 3 | USB Pen Drive Linux
View 1 Replies View RelatedI am having 500gb usb hardisk in which i had create a partition of 10gb and i want to create that partition bootable with windows 7 pls tellme what to do there are many ways given to make harddisk bootable but its for complete harddisk not for selected partition.
View 3 Replies View RelatedI just received my new Corsair 16GB Survivor Stealth USB Flashdrive. Is it possible to make the USB drive bootable...yet still able to store regular files (word docs, pictures, mp3's etc.) without compromising the ability to make it boot if needed? If so what is the best way to go about making this happen? (I already know how to make a flash drive a dedicated bootable).
View 8 Replies View RelatedI recently built me a new pc. Everything went fine and I managed to install windows 7 64 bit. Couple of days later, I needed to re-install windows again. So I changed the bios so that it would recognise the dvd drive and boot the windows cd. However, this doesn't seem to happen. Once windows is installed, the Sata drive is recognised in windows and is usable. I managed to get a workaround by using an ide dvd drive to install windows but I would like to be able to use the Sata drive that I have put in the machine.
View 2 Replies View RelatedWhen I installed windows 7 64 Ultimate I set up a multiboot machine from within Vista, I installed windows 7 and Ubuntu on separate hard drives (one HD per OS). The boot menu is on the Vista drive. All drives are SATA.I soon formatted the Ubuntu drive and removed the option to boot to it. My Vista OS no longer boots, it just hangs whilst loading so I want to format that drive now and just use Windows 7. However, I have tried removing all the hard drives apart from the windows 7 one and I find that this will not boot.i would like to make the windows 7 drive bootable but I am not sure how to do this.I have tried removing all the HD's apart from the none booting windows 7 HD and putting in the Windows 7 disk and carrying out the option to repair start up (not sure exactly what this was called) several times but this does not make any difference. It just prompts me to restart the machine and boots again from the DVD.
View 7 Replies View RelatedI have been having many problems with my old hardcover and after finding out it was the source of all my problems I decided to go out and buy myself a new hard drive today,It is a 3.5" internal sata 2
7200 rpm
32 mb cache
From intenso
My motherboard has two sata slots, I managed to install windows on my new hard drive through the files saved onto my other hard rive. Windows is successfully installed on my hard rive but I have to keep the old one in to boot from, is there a way to create a partition on my new Hardrive to boot from so I can unplug my old hard drive as it takes up the slot where my DVD drive should go.
How to Make a MS-DOS Bootable Flash Drive ?
View 0 Replies View RelatedI want to create a pendrive bootable but for that is it necessary to have ur windows setup in ur dvd or cd? becoz i have my setup in one of my computer's drive E.so what command i should write in order to make pendrive bootable at the last..
View 3 Replies View Relatedwhen I install window 8...so the existing window 7 files moved into D drive(which was in c drive previously). so window 8 files are in C drive. so when I starting my computer only window 8 is booting....window 7 is not booting....bcoz D drive not bootable. so what can do I do? I want solution so that both windows work..
View 1 Replies View Relatedwhat is the name of the software used for making pen drive bootable for windows7
View 1 Replies View Related