I download a software, it has iso file. Because I have no CD-ROM, I want to make it to a USB bootable disk and boot this software from USB, rather than. install it on my hard drive. Can Everyone help me?
View 4 Replies
i'm going to flash my bios to a newer version with DOS, but i'm not sure how to make a DOS-bootable DISK?
View 9 Replies View RelatedI come with cap in hand and head bowed in shame at this, my first post - after so many months reading the knowledge that so many of you seem to have.
I seek your help if you would please. After downloading at 45k all day what I believed (and still believe to be!) was the iso image of the RC, I (merely?) have the RC content that I need to create a bootable disc.
I have used Bart's BBIE to extract a boot image file from my previous W7_7068 disc and I now have 'image1.bin' at 2k.
But from here? - How and where do I merge this bin file with my W7_RC content? (I'm using 'CDBurnerXP').
Call me a 'noob'or call me a 'knob', either way I'll cop it sweet.
I recently purchaced a new notebook, shipped with Windows 7 64-bit HP. I need 32-bit in order to run certain programs, so I used my Windows 7 Ult DVD and installed it on this laptop. I did not delete the recovery partition that was already on the drive, but I re-installed my own Windows 7 on the partition with the pre-installed Windows 7. This was a mistake... I lack a lot of drivers and pre-compiled software that is not available for download from the manufactor. So, I hope there is a way to make the recovery disk bootable, so I can boot from it in order to respawn the pre-installed Windows 7.
View 3 Replies View RelatedI installed a second HDD and installed Win 7 onto it and then t/f all data from the original VISTA HDD over.Been running just fine for a few months. Decided to remove the old VISTA drive and now I get "no disk" error when I bootI assume that the boot files reside on the old VISTA drive as I used to get the boot manager screen asking which OS to boot.What is the easiest way to make the Win 7 disk bootable now?
View 9 Replies View RelatedI have a friend that burned me an antivirus program that his job uses, he used a flash drive to get it on dvd. I can extract it to the desktop, but cannot boot from it. Is there a way to make the disk bootable, because it is supposed to be bootable in its true form. I can still run the program, but if something was seriously wrong, I would not be able to boot from it, wanna know if that is possible!
View 1 Replies View RelatedSomeone want to explain how the hell you make a bootable ISO from these leaked builds?
Everything I try is FUBAR.
Edit: Okay..nevermind..I Frankenstein it and figured it out finally..I just copied the install files onto my USB flash drive and rebooted and set to boot to USB drive.
No need for an ISO
Edit 2: ...Okay..I give up..I get an error during install saying Windows can't install the required files. The file may be corrupt or missing. bla bla
Anyone else getting this with the 32bit leaked copy that just came out?
I have a new hdd and I got a dvd with Windows 7.
Unfortunately it isnt bootable, so how can I make it bootable?
I only have a laptop(with dvd burner) an empty dvd and the Windows 7 dvd.
So how can I make it bootable?
Rip the files off, and then?
Maybe it's a stupid question,but I can't figure it out how...?
At this moment,I have Win 7 buil 7000 32 bit installed,and I want install x64 version,so I have downloaded Windows 7 build 7048 x64,but it's not a bootable ISO file.
I managed to make an ISO,but have never did and don't know how to make a bootable ISO file,I have already tried several programs(PowerISO,MagicDisc,ImgBurn,Nero 8),but every time I burn an image on disc,it doesn't work.
If there is someone who is willling to explain me correct way step by step,I'll be really greatful.
I downloaded OFFICIAL Windows 7, but there is no ISO file so how do I make it bootable? There is a setup.exe file but since i have VISTA 32 bit i cannot clean install to W7 64 . So what do I do?
View 5 Replies View Relatedhow to make a bootabe dvd or which software should i use to make a bootabe dvd for win 7
View 7 Replies View Relatedi resized my my C: partiton and it is my main partiton usin Partiton manger and since then it is not bootable and windows is not loading although i didnt format
View 1 Replies View RelatedI want to know how I can make bootable DVD of windows 7 64bit ultimate, and I have this windows in form of ISO file but I do not know how to make bootable Windows DVD from this ISO file by NERO 8.
View 2 Replies View RelatedI have a server and domain in my house. I bought a few laptops for my family and I want to install Windows XP Professional on them. For now I'm just focusing on one computer but how would I go about making a .iso file bootable and then putting on a flash drive so I can install it on a computer with no operating system. (I already made the .iso file I just need it to be bootable)
View 2 Replies View Relatedi have got Windows 7 64 bit home basic dvd...i want to format my system,,,i want to make a duplicate copy of Windows 7 64 bit dvd....so that i can install it in my system. when i format my system.
View 9 Replies View RelatedI have an HP pavilion dv6 that came with windows 7 64 bit. But I'd like to install Windows 8 on a separate partition. I tested this out on another computer and was able to successfully make a bootable partition and run both windows 7 and windows 8. But when it comes to my dv6 I'm having issues. At first I found online that a dynamic partitions can't install windows and that only 4 partitions max per drive. Did some more searching and found out that I could just delete my hp_tools and recovery partitions after I make a backup. And even though I did that, I still get dynamic partitions. Keeping me from installing any other os.
View 3 Replies View RelatedIf you get the student d/l and have 3 files :
Windows 7-HP-Retail-en-us-x64.exe or Windows 7-HP-Retail-en-us-x86.exe file for the 32-bit (x86) or 64 (x64) bit Windows 7 that you purchased
- setup1.box
- setup2.box
How to make pen drive as bootable.I tried with several open source applications but I am getting target device not found.my system USB and pendrive both are working condition.
View 5 Replies View RelatedI have a computer with two drives, both of them have a licensed version of Windows 7 installed. My problem is that the boot dirve is installed on the large hard drive (1 TB) and I need be able to boot off of my small ssd drive so that I can replace the 1 TB with a 3 TB. how can i make ssd drive bootable with out re-installing windows and redoing all of my settings, and programs.
View 4 Replies View Relatedi have an image of win7 64 pro original (got from uni) and until now its just dosnt boot from the bios
is there a good way to burn to the dvd so i can make it bootable - i have nero burning rom
How do I make bootable usb from iso file?
View 2 Replies View Relatedi got a windows 7 install disc and want to copy it to another dvd and make it bootable as well how can i do this?
View 9 Replies View Relatedi have question i am trying to make bootable cd of windows 7 but cant make it am trying from ages.i also got know that i make to comvert files .all files in iso .i download iso pro throught i did and it created some file says new.iso same place.i then burn cd but still not bootable please let me know how i can make bootable cd of win 7 .i have all the complete files including boot imgr
View 7 Replies View Relatedi want to make bootable pendrive?
View 1 Replies View RelatedI had XP and Vista installed on my primary SATA hard drive (on SATA0 channel). There was no space for another operating system, so I added a secondary hard drive (to SATA2 channel) and installed Windows 7 to it. It worked perfectly. After a few weeks my old primary hard drive suddenly died, and the computer doesn't boot anymore. So I put the remaining live hard drive to SATA0 channel, and bought another new SATA drive and put it to SATA2 channel. Now I need to add boot files to my drive, because both operating system and data files are there, I just need to let the computer start.
So I have one good healthy SATA drive, Windows 7 installed on it, but without boot files, because that other (now dead) drive was used to start up the computer. I though that Windows 7 Installation DVD will help, but it doesn't. When I try to use its repair disk feature, it fails to find any installed Windows, so it says there's nothing to boot to, nothing to reapir. If I use the command line utility from the same DVD, I can see both my C: and D: partitions are there, with all files, I can see all my directories, I can see Windows folder, Program Files folder etc. But what does it need to boot?
I also tried "upgrade" from W7 Installation DVD, but it says that I should run this option from inside Windows. Since I cannot start the Windows, this option isn't for me. When I tried a new fresh installation, I got a warning that all my current data will be overwritten, and that also isn't option I am searching for.
Learn how to make any bootable CD or DVD bootable on a USB flash drive. This process allows you to quickly and easily create bootable USB flash drive copies of important software, such as Microsoft Windows, firmware update utilities, and various Linux operating system distributions. Most CDs and DVDs that are bootable in a native environment can be made bootable on USB with the Universal USB Installer utility by Pen Drive Linux.See: Universal USB Installer - Easy as 1 2 3 | USB Pen Drive Linux
View 1 Replies View RelatedI have a system with two harddrives, one with Vista and one with Win 7. Vista drive was used to boot the system. Recently Vista drive dies, so I tried to boot from Win 7 drive. Since bootsector isn't there I can't. How do I make the remaining Win 7 drive bootable?
View 2 Replies View RelatedThis should be east. I asked a hardware group and they gave me this link How To make Bootable USBUnfortunately He is showing how to make a USB with windows 7 bootable.What I want is to be able to put the equivelant of autorun.ini withthe name of the EXE. Not windows but my own software.
View 2 Replies View RelatedI am having 500gb usb hardisk in which i had create a partition of 10gb and i want to create that partition bootable with windows 7 pls tellme what to do there are many ways given to make harddisk bootable but its for complete harddisk not for selected partition.
View 3 Replies View RelatedI just received my new Corsair 16GB Survivor Stealth USB Flashdrive. Is it possible to make the USB drive bootable...yet still able to store regular files (word docs, pictures, mp3's etc.) without compromising the ability to make it boot if needed? If so what is the best way to go about making this happen? (I already know how to make a flash drive a dedicated bootable).
View 8 Replies View RelatedWhen I installed windows 7 64 Ultimate I set up a multiboot machine from within Vista, I installed windows 7 and Ubuntu on separate hard drives (one HD per OS). The boot menu is on the Vista drive. All drives are SATA.I soon formatted the Ubuntu drive and removed the option to boot to it. My Vista OS no longer boots, it just hangs whilst loading so I want to format that drive now and just use Windows 7. However, I have tried removing all the hard drives apart from the windows 7 one and I find that this will not boot.i would like to make the windows 7 drive bootable but I am not sure how to do this.I have tried removing all the HD's apart from the none booting windows 7 HD and putting in the Windows 7 disk and carrying out the option to repair start up (not sure exactly what this was called) several times but this does not make any difference. It just prompts me to restart the machine and boots again from the DVD.
View 7 Replies View Related
