My Windows 7 motherboard stopped working so I installed a new motherboard. The SATA hard drive is not recognized by the motherboard software or the Windows 7 installation disc. What the heck?
View 2 RepliesI am doing a motherboard upgrade for a friend. I need to know how I can move his hard drive with his current OS instal to the new motherboard without having to do a fresh Windows 7 install. He has too much that cannot be replaced. Is there a way to do this?
View 2 Replies View RelatedI have a hard drive with Windows 7 and lots of data on it (it's my current computer). I'm upgrading to a different motherboard and would like to know what I should do software/driver wise to prepare for the HDD transfer... Should I uninstall all the drivers so Windows 7 can detect all the new hardware from the new motherboard?
View 5 Replies View RelatedI am planning to replace my motherboard and memory on my Win 7 Home premium 64b. I've been updating MBs for 25 years and now I am getting conflicting answers regarding booting existing hard drive on new MB. My present Win 7 installation was installed on my present MB. Before I have always been able to use an existing hard drive and OS on a new MB.Now when I asked Gigabyte if a reinstall would be required they said no, but the registry may be full of unneeded drivers etc which would affect performance. This seems a solvable issue using registry cleaners and editors.But I am also getting opinions that Win 7 will not boot up on a new MB and reinstall OS would be required. Considering the number of programs, some on disks others from downloads. activation keys etc, this is a major problem.
View 9 Replies View RelatedI was wondering if you could provide me with some feedback on a hard drive issue that started when I booted up my pc yesterday. Hard Drive is WD 160GB SATA.
I received this error at boot up:
Read Disk Error CTRL+ALT+DEL to restart
I restarted and luckily I was able to get to the desktop (took longer then normal tho).
Checked Event Viewer.. nothing showed. Checked Performance Logs... no errors showed.
Decided to double check all the connections... all plugged in nice and secure. Rebooted. Got the Read Disk Error again. this time it took me 3x to get to desktop. I decided to try another SATA connection on motherboard. REbooted.... got error again.
I ran a chkdsk/r and when system rebooted the Read Disk error showed up again.
After another 3 ctrl+alt+del reboots... I was able to get into Windows. I downloaded the Diagnostic Tools from WD and my drive failed both the Quick and Extended Tests. Not surprising lol
Anyhoo, here is a screenshot of my WD Diagnostic test results. I was wondering if it was a HDD issue or a motherboard issue? Any thoughts? I would rather replace a HDD then a motherboard. This WD 160 SATA drive is less then a month old also. BIOS sees the hard drive.also tried setting BIOS back to default.... sometimes that works but not this time.
My Old HDD crashed, it had windows 7 on a D: logical drive with an extended partition (Not sure why/how I ended up with a D: logical drive and an extended partition, it probably happened when I upgraded my windows xp to windows 7 32 bit OR when I upgraded my windows7 from 32 bit to 64 bit, anyways.....). My old HDD also had two other primary partitions which probably had some system files etc,. I do not have a backup of these two primary partitions, however, I do have a paragon backup of my logical drive D: extended partition alongwith a backup of first track (not sure what that means). My old drive is bad. I got me a new HDD, created a new NTFS primary partition with a drive letter C:. I then restoed the paragon backup of my windows D: drive on to this new primary C: partition. Now, I am not able to boot windows 7. Seems like I need to make this new partition bootable and/or make it a system partition. Not sure how to do this. I dont want to install windows 7 from scratch and then load all the software programs.
View 8 Replies View RelatedI recently bought a new hard drive with windows 7 home premium 32 bit installed. When tried to install it in my pc it would not boot up, I am assuming its because everything is new to it. I bought a windows 7 recovery disc but it has not worked. I did not get an install disc with the new hard drive.
View 5 Replies View RelatedI have a dell dimension 9100. I have two drives on it, a ~160gb drive that came with it with xp, and a 500gb drive with win7. I put the win7 in myself and had been using that. Finally, I decided to erase the old drive with xp on to install linux on it. After erasing the old drive, my computer won't start up. It says it cant find sata 1 or 3. I've tried switching the cables hooking up to it but that doesn't help. If I push continue after it tells me how it can't find them, it says 'loading pbr for descriptor 2...done' and stays there. I did not erase windows 7,
View 4 Replies View RelatedSo, I've added a second hard drive to my Windows machine and now it will not boot up. I added the new hard drive on SATA 3. The original is SATA 1, and my DVD is SATA 0. This is how it's always been; I've changed nothing else. I don't have any idea where to start fixing this. I have a dual boot with Ubuntu on the same SATA drive 1, and that boots just fine. I switched on the new hard drive in the BIOS, and flipped a few other options on and off to no avail.When the computer boots I choose the Win7 install. Then it will take me to a screen that asks me if I want to start windows normally, or do a disk repair. Starting normally gets you nowhere, it will just end up resetting the computer. Starting the disk check will do a scan for a few minutes and then ask me if I want to send an error report. Clicking yes or no doesn't seem to matter because after that the only option is to shutdown or reboot.When this first started I at one point had the option to do a system restore, but I didn't think it was necessary so I didn't. I no longer receive that option or I would try it at this point
View 2 Replies View RelatedI found another old hard drive, a Seagate 250 GB, and when I plug it to the pc, Windows is stuck at the Windows 7 logo at the boot, and the logo itself lags. the hard drive is detected in the BIOS. (can it be a virus on this old hard drive?)
View 9 Replies View RelatedI've recently purchased two 30GB SSDs which I have set up in a RAID 0 array and I have installed Windows onto these drives. I have a second, 2TB Seagate Barracuda Green HDD that I have used to put my user profiles and additional programs/games on as it wouldn't fit on the SSD.Everything was fine for a few days after installation. Then this morning I rebooted the computer and it just stalled on the flashing cursor (underscore) in the top left corner of the screen. I did the basic fixes (Windows repair, checking RAM) and nothing worked.Then I thought that I should try disconnecting all but the SSD with the OS on it. SUCCESS! It booted to Windows but couldn't find any programs/user data so it created a new "profile". I shutdown the computer and tried reconnecting just the data hard drive.I have two additional hard drives (used for backups) that don't affect anything at all when I plug them in.Does anybody know what could be the problem? I'm at a loss and I need the computer
View 3 Replies View RelatedI have a computer with two (IDE ribbon cable) hard drives. One had a bad windows XP installation on it. I installed Windows 7 on the other. I formatted the drive before installing Windows 7.Then, I decided I want to use the hard drive with the bad winXP installation on it, in another computer (I will format it). When I opened the computer side panel, I wasn't sure which hard drive was which, so I unplugged the power to one, and started the computer.The thing is, it won't boot Windows 7 with either of those hard drives alone, only when both are plugged in. With HD #1 disconnected, it says "Can't find BOOTMGR, press a key to reboot." With HD #2 connected, I get asked whether I want Windows 7 or an older OS, and when I choose Windows 7, I get an error message, something like "Windows 7 failed to start. To try and repair, insert install disc, or use recovery mode, etc" With both HDs, I get asked the same question, "Windows 7 or an older OS," but when I choose Windows 7, it works. In my computer, I have verified that Windows 7's files are on one disk, and corrupt winXP files on the other.
View 8 Replies View RelatedRecently I had a drive failure and I need to have an extra Windows 7 x32. The remaining drive a WD 320gb drive has a dual-boot Windows 7 and XP. How can I triple boot in just one hard drive?
On that particular system I am using Neosmart's iReboot/EasyBCD so when I want to boot to either of the former arrangment I can do that easily and not be bothered by the boot selection.
Now I am using ATI Home 2011 and I was planning to make recover an image from the drive that failed to a 3rd partition on the WD320gb drive. I really need to get this one going in the meantime I do not have the money to buy a new one.
I have a Machine with the Following Config:
Intel E2180 CPU
2GB Ram
Gigabyte GA-G31M-S2C Mainboard
Seagate ST31000340NS SATA Hard Drive Connected on SATA0
Operating Systems:
Windows 7 Ultimate 64Bit on HDD
Windows 7 Ultimate 32Bit Booting from VHD
I Installed Windows 7 Ultimate 64Bit onto Hard Drive as Per Normal Installation Onto the Hard Drive and Installation created 2 Partitions (1 System PArt and Another for C: Drive) Everything Works Great.m I Then Installed Windows 7 Ultimate 32bit Into a VHD. Setup Created a Multiple Boot Entry into the BCD so that when I Boot it Prompt Which OS I Want, I then Used BCDEdit to Change the Descriptions of the Boot Options "Windows 7 Ultimate - 64Bit - HOST" and "Windows 7 Ultimate - 32Bit - VHD" Everything still works Great.. No Problems.. Been Like this for a While Now and Perfect.
Now the Problem is that I Need to get some Data From and Old SATA Drive. I Shutdown .. Plugin the WD1600AAJS (160GB) into Another SATA Port (SATA1).. Turn Machine on and Press Delete to Enter Setup for Bios.. Goto Set Boot Device Priority and Ensure that the ST1000340NS Drive is at the Top (1st Priority).. Exit and Save Settings.. PC Goes through POST and Then Will not Boot.. it Gives "Missing Operating System" Shutdown Remove WD1600AAJS Drive.. Boots Perfect.. Reattach WD 1600AAJS Drive and "Missing Operating System" Tried Using "F12 to Select Boot Option" during POST to Select Boot Device.. Choose ST1000340NS ... and Still same Issue.. Remove the WD1600AAJS and Boots No Prob Off the ST1000340NS.
I thought that maybe it was the WD Drive.. so Tried another Seagate Drive.. and Same Issue..
I have set Every Available Option on The Bios to Choose the Boot Device and NOTHING Works.. I have Even swapped HArd drive SATA Ports .. still no Difference.
I have an Idea there is a problem with the BCD but I Cannot Edit or Add any thing to the BCD as it will not boot with the second drive attached. And When you edit the BCD it need the second drive attached to be able to Add a BCD Entry.
I've had a Windows 7 PC that's motherboard recently broke so I have been trying to use the hard drive with another PC. The PC I'm trying to put it into has all Windows 7 compatible parts. I get to the starting windows screen and it restarts the computer and gives me the option to Launch Startup repair. I launched startup repair and it says that it cannot fix the problems automatically. I can hookup the hard drive as a secondary hard drive and access all of the files on it but I cannot make it primary it just wont boot. The computer that the hard drive originally came from did not include a recovery/install CD.
View 1 Replies View RelatedAsus cm5570-ap006 originally running vista premium and owner wanted an upgrade to seven. Bought a new hard drive b/c old one died. Mobo had trouble finding new drive but, after setting bios back to default(F5) it installed and finally got working.Owner gets pc and starts getting blue screening and saying theres an f1 drive error and wont wake up after suspending without reboot.So I get it running fine by removing avg(which is causing blue screen for some reason) and the it is now waking up after auto hibernation. But if you put into hibernation manually it wont wake. I update windows and it goes back to not recognising hard drive.Flash bios remove cmos baterry reset bios to default and set hard drive to ahcpi and it reinstalls fine update windows and it stops working. Use restore point to get it back and running and this time dont update windows and its running ok again. Shut it down for the night and the next day go to boot it up and there is no bootable media and now I am trying to reinstall Windows 7 and after it does it gets a no bootable media error even though it is
View 3 Replies View RelatedI have a PC on which the hard drive died. I had previously done the Advisor and it said everything is OK for new install of Win 7 Home Premium.
I removed old hard drive and 2 gigs of memory (now 2 gigs installed) installed new hard drive, set appropriate ( i think) BIOS parms. When I start the DVD I get the 'loading files' message and the colorful logo then a blank screen with a large arrrow cursor -- and nothing. Wait 5, 10 15 minutes and the only hint of activity is the hard drive light is flickering about once every 2 seconds. I've now waited for over an hour and still nothing else.
I've tried to do all the things that have been suggested for others who have had problems but it hasn't helped. Machine is a Dell 4700C with 3.4 GHz processor , 2 gigs of memory, only keyboard, mouse, and monitor attached in addition to the hard drive.
I just restarted my PC and i kept getting erros regarding hardware, at first it would just hold at updating dmi pool , after i reset the bios to fail safe defaults it would then give me the I/O error. I noticed my external drive was turned off and I turned it on and windows booted fine. Is there a connection here i can disable?
Windows is installed on my SSD drive not my external.
my hard drive that runs my windows 7 wouldn't boot, so in the end I re-imaged it, and since then I have no sound. I updated my drivers, checked it wasn't muted in the bottom panel, changed my leads, tried different types of leads, directly attached it to my tv to ensure it wasn't a problem with the amplifier, went to ASUS's site downloaded the new drivers again directly from them, got a snazzy new aplication out of it but still no sound. Checked my graphics cards are in securely, checked they're showing up, updated those drivers, ran windows updates a few thousand times, ran mr fix it, he tells me that the speakers, headphones etc are not plugged in, but they are. At least that's what the good fellow told me before my asus driver update, I will check back with him after walking my dog.
View 2 Replies View RelatedI installed windows 7 on my computer that has two hard drives and I tried to remove the secondary drive ( it was used as storage) when I removed the second drive I was then unable to restart my computer. I tried to repair start up from the install disk (3 times) it did not work. when I plug the second drive I am able to start up again. I would like to remove the storage drive and replace with a larger. I bought a wireless seagate 2tb free agent goflex hard drive and wanted to put the 2 tb hard drive into the computer and take my 1 tb drive from the computer and use it in the wireless system.
View 3 Replies View RelatedSo I've been collecting extra parts on the side for a while, and finally got around to throwing them all in a rig yesterday.[code] Now it boots fine and happy. I went to install windows from a dvd, the installer saw both hard drives but told me that "windows cannot be installed to this disk. this computer's hardware may not support booting to this disk" for both. Something about both of them saying that told me it wasn't something wrong with the hdds, especially because the 120gb one was fresh out of a antistatic bag that was sealed from the factory :. I went into bios to figure out why, and after looking around I found a utility called "Super Recovery". It basically allows you to manually put in a reserved system partition on the hard drive that windows usually automatically puts on your hard drive of like 100mb. I did that to the 120, and boom, windows allowed me to install onto it. Windows finished installed completely, and went to restart. My boot priority has always been Hard Drive -> then CD-ROM. The system trys to boot from the hard drive, then gets nothing and boots from the cd again. If I take the cd out, it sits there for a bit, then tells you that you need to insert a system disk. The 120gb hdd is pinned to master mode, and the 80gb is pinned for slave. They are plugged into their respective master and slave plugs on the IDE cable.
View 12 Replies View RelatedFirst, the information as it is. I had a hard drive issue that I'm working on currently, trying to recover I suppose what is a crashed hard drive. There are tons of errors on it, but that's not the question I have right at the moment, but some background.
I have tried to reinstall Windows on a brand new 2.5" Seagate 500GB 7200rpm HDD. I formatted the drive using the windows 7 ultimate installer and booted it using a USB booter made from the windows 7 download tool.
When I booted it up and tried to get it going, it gave me a hardware error saying "Windows wasn't able to configure the hardware and try startup repair" or something to that effect. I read around and it said that since my BIOS says the HD is in raid configuration that it needed some Intel Raid driver, which I installed and tried running, but it didn't seem to work. It says now "windows cannot repair this computer automatically". The problem signature is as follows:
Problem Event Name StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
[Code].....
Primary HDD in the BIOS is recognized as 500GB RAID is On as well. Trying to install Windows 7 Ultimate 64 bit.
What happened to my computer is, I kept getting the BSOD, I went into safe mode, removed the most recent programs I had installed, and it stopped happening. I then proceeded to plug in my external hard drive. It was not recognizing it for some reason, so I went to disk management. It was listed there, just without a drive letter. I tried to assign it a drive letter, and it gave me an error message saying something about refreshing the list, (this is the error message I should have researched), I tried refreshing the drive list, and tried reassigning the drive letter, same message. I right clicked on the drive again, and I saw mark as active. For some stupid reason, I clicked on this. Then seeing that it didn't do anything, I thought maybe restarting the computer would maybe do the trick. Now my computer won't boot.
It gets to the windows logo, and boom, restarts all over again. I tried many things like, startup repair, system restore, marking partition as active CMD, with diskpart, I also tried some of the commands in bootrec.exe. By the way, if this helps at all, my hard drive is a solid state drive, I also have a slave drive in there which does also have a copy of windows installed on it, (it was my old hard drive), I tried setting that as my primary boot and it boots into my old install of windows, before i got my solid state drive. Is there a way I can fix the startup by having access to it from an operating system instead of the recovery environment?
Is it possible to dual boot windows 7 and ubuntu, with ubuntu on a external hard drive? I can connect my external hard drive via USB 2.0, USB 3.0 or E-SATA. I want windows 7 as my main OS.
View 8 Replies View RelatedAfter formatting hard drive to reinstall windows 7 its saying missing boot?
View 4 Replies View RelatedAbout 6 months ago I set up a new machine dual boot using GParted with the following configuration:
/dev/sda1 ntfs (Windows 7 system reserved) 100 MB
/dev/sda2 ntfs (Windows7 C: drive) 99 GB (includes 4 GB of preloaded page file space)
/dev/sda3 ntfs (Shared drive - Windows7 E: Drive / Ubuntu sda3) 801 GB
/dev/sda4 extended partition 32 GB
/dev/sda5 ext4 (Linux Root) 30 GB
/dev/sda6 linux-swap 2 GB
I set it up so that I could access my E: drive from either the windows or ubuntu operating system. It has worked perfectly so far (about 6 months). But, here is the problem:For some reason as the share drive (my E: drive / sda3) grows Windows thinks that the windows system drive (sda2/c:drive) is also growing. So that now I have a low storage warning stating that there is only 8.76 GB of free space left on my 99 GB C: drive. When, in reality, there should be about 77 GB of free space. I've made hidden files/folders viewable and downloaded treesizefree so I know what should be on the drive. The Treesizefree output shows the expected 22 GB of space but also shows only 9 GB of free space. So, the missing space is nearly exactly the size of my shared drive (sda3/E:drive). So somehow, I think the windows OS is double counting my shared E: drive against my C: drive.
I have a Dell Inspiron 1545 (2.5 years old). All my data is backed up so I have no concerns about recoverying data.First, the laptop crashed and ran several chkdsk on start up. I froze several times during this. It said it had fixed some errors then started up again.This time it wanted to do start up repair. Same thing kept happening, froze at least twenty times during this. Eventually it gave me the blue screen of death.
'Technical information
*** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8004C1D260, 0xFFFFFA8004C1D498, 0xFFFFF8000130DDA0)'
This repeated several times. I ran the diagnostics and it told me the hard drive could not be found (error code 0146, 2000-0146). Essentially, it's a Dell laptop (I know) and I am not bothered about recovering the hard drive.I would, however, like to install Windows 7, or alternatively Linux, onto my external hard drive. But I just can't seem to get it to work.I have extracted a Linux iso to the external hard drive I want to install on, onto a cd, onto a FAT32 8gb usb stick, but it has given me the bootmgr is missing error every time. I have tried it with the interal HDD in and removed.I am no longer concerned about the internal HDD, i can use it for a door stop for all I am concerned, I just want to load ANY os onto my external hard drive so I can get the laptop working.
This pops up following the DELL logo.Phoenix ROM BIOS PLUS Version 1.10 A07 COPYRIGHT 1985-1988 Phoenix Technologies Ltd DELL DXP051 Series BIOS version A07 [URL]
Drive 0 not found: serial ATA, SATA-0
Drive 1 not found: serial ATA, SATA-1
Drive 2 not found: serial ATA, SATA-2
Drive 3 not found: serial ATA, SATA-3
Strike the F1 key to contihue, F2 to sun set-up utility Hitting F1, all is good. But why does this appear and how do I eliminate this process?
After I got sick of some programs crashing, I decided to install windows xp. i shrinked 1 partition and created a new partition called XP mistakenly under drive A. I shutdown and put in xp disc, selected the newly created partition and chose install there and said not to format as it did when i partitioned. It copied the files and reboted, I took out the disk. The fist screen of my bios now says flopy disks fail (40) or something like that. When I normally go to select an OS, it says hard disk could not be read. I put in my win 7 upgrade disk to try to restore, but there is no restore on an upgrade disk. When in the windows 7 install screen(looking for restore) I deleted the newly created partition. How can I get the computer to boot from hard disk again?
View 3 Replies View RelatedI have two hard drives in my machine and want to choose which one boots when I power up. One has win 7 64 bit (default load) the other Win 7 32 bit. The 64 bit does not play my games right while the 32 bit is perfect. I do want to keep the 64 bit for my other applications.
View 10 Replies View Relatedand i signed up because Microsoft support rips you off (says they don't know the answer, so they charge you to open a case, which is 1 fee until solved, then 10 seconds later they're like "okay, so this is what you do"). Recently because my computer was getting extremely slow, i bought a new 2 TB 7200 RPM seagate hard drive. I installed it, put windows on it, and for some time it was booting fine, but then i decided i was satisfied and ready to wipe the old OS hard drive to reclaim the space on it, so i did so, then when i rebooted the computer i got an error saying something like "unable to find system files, reboot and select correct device". I then decided i'd try to reinstall or repair windows, but i get this error code when it tries to expand files: 0x80070017. Now when trying to boot from any of my 3 hard drives it says "bootmgr missing" I'm quite sure there were no viruses on the machine, though it had been a couple days since i last scanned.
View 2 Replies View Related