Drive Crashed In RAID Config
Jun 17, 2012
I have an HTPC that I've had for about 4 years now. Today when I booted it up it went into an infinite loop with the 'Startup Repair Utility" where it would just sit there claiming to be repairing the drive but never actually completing or providing a notification of the issues (typical Microsoft troubleshooting). Anyway, I finally was able to get into the advanced settings of the utility and get to a command prompt and see what was going on.
1)The previous RAID 1 configuration was setup as the main C: drive with the OS and also where I had all our music stored. But now during the boot sequence the bios startup it flashes in red complaining about the RAID array having degraded and when I finally got into a command prompt it was no longer mapped to C:, the two drives in the array were mapping independently as drive E: and F: respectively (the DVD-ROM is the D: drive).
2)My first concern was to get my music off it so I plugged in an external USB drive and went into command prompt and tried to xcopy from E:, it started to copy then failed catastrophically with a weird error so that would appear to be the bad drive. I then tried the same thing on drive F: (the mirror) and its cranking along nicely copying all my music over. My fingers are crossed but I suspect I'll be OK, its unlikely to get two drive failures in the same array at the exact same time
Once I get my data off the good drive how should I proceed? I assume I need to get a new duplicate drive installed and then can I not rebuild the RAID array from the good drive? I've never done this before, the machine came built for me so I'm not familiar how it is setup. What I do know is that it has a 'RAID utility' you can jump into at boot up by hitting F10.
View 2 Replies
ADVERTISEMENT
Aug 12, 2012
Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
View 1 Replies
View Related
Jun 10, 2012
How to reset my raid configuration to normal after creating a Raid0 without failure from disk.
View 1 Replies
View Related
Aug 17, 2010
My system crashed on bootup. I was booting off my RAID. All 3 disks say error. When I try to install Windows 7 and repair it won't let me load the nvidia drivers. The nvidia drivers are .exe installations. Does any know where I can download the normal nvidia drivers to install?
View 1 Replies
View Related
Jul 20, 2009
tried to install another 80gig seagate sata drive
it installed o.k and in my computer shows disk d,I only want to use this as storage,but whenever i download anything and want to send it to d it isn;t in the drop down menu,its showing in the sidebar i can drag the files across into d and works o.k.but am mystified why i cant get it in dropdown.have formatted drive,in the disc manager it shows healthy and active.
by the way i think windows 7 is running great couple of teething troubles but o.k
View 2 Replies
View Related
Nov 13, 2012
I am running windows 7, I was able to connect to the internet via WiFi the whole time, now I am unable to do so. I have bought a new Lenovo laptop and I am now having a problem that tells me "invalid IP config" the whole time.
View 10 Replies
View Related
Jun 12, 2012
I have a Acer Aspire Laptop that was running Windows 7. The hard drive had totally crashed so I ordered one from Newegg. It came in and I installed the Western Digital Hard Drive. here was no problem in installing the hard drive. After installing I checked the Bios and the drive was recognized.I had ordered from Acer a set of Recovery CDs which I used today to recover Windows. All went well and I had the system up and running. There were a 109 Windows updates that I started. Went in the other room and came back in about a half an hour and the laptop was dead. I went into Bios and no drive was recognized.
View 2 Replies
View Related
Sep 12, 2012
My hard drive crashed and I am replacing it with a new one. Can I just install a fresh copy of windows 7 on acer aspire 4810t without having to do any upgrades? I cannot upgrade until windows 7 is installed first. Is that possible?
View 2 Replies
View Related
Dec 3, 2012
I had a Windows XP OS that I used when I stored 15 gigs of data and photos on my iomega LDDHD-UP external hardrive. My internal hard drive crashed and I up graded to windows 7. The exxternal dive indicates all files are PBD files and I can't find the program to open or retrieve them .
View 2 Replies
View Related
Apr 12, 2012
The hard drive on my Toshiba Satellite crashed. I made the backup discs when the computer was new, but evidently made them through the Toshiba backup rather than Windows backup. Now my recovery discs want to access the hard drive partition to reinstall Windows 7 which it cannot do.
How can I install the Windows 7 OS onto my new hard drive? I have the product code on the back of my computer, but how can I get Windows 7 to install without having to purchase it again?
View 2 Replies
View Related
Nov 3, 2010
My dad's hard computer crashed, and we've spent the better half of 12 hours trying to recover about 30 gigs of music off of it. The problem is that the Windows repair stuff that came with our Windows 7 Ultimate isn't helping AT ALL, neither is repair disks, or any other junk that you can think of (and believe me, we've tried it all). When we try to boot the hard drive we get a "Error Configuring System" message, and when we've tried to run Safe Mode by holding f8, it doesn't allow us to. Now, we've also tried running an alternate boot source from the BIOS menu, then holding f8 to see if it'll give us advanced BIOS options and allow us to get to safe mode that way... but to no avail.
View 9 Replies
View Related
Jul 31, 2011
I used MiniTool Partition Wizard Professional edition to merge two partitions and now my daughter's computer won't start.I installed a new 750 gb hard drive to replace her 320 gb drive. Everything was fine, but when I cloned her 320 gb hard to the 750 gb drive, it partitioned the drive so that 320 was allocated to the active boot system and the other 400-some were unallocated. I needed to merge both partitions so that all the space would be usable. This is how the drive was partitioned.B: System 199 MB --> C: Bootable Active 285 GB --> D: System Recovery 12 GB --> Unallocated 400 GB..MiniTool Partition Wizard will only allow you to merge two partitions that are next to each other, so in order to merge partition C with the unallocated partition I had to delete partition D.Everything was fine, but then MiniTool said it couldn't finish the merge process because partition C was in use. It told me to restart my computer to finish the merge process.I restarted the computer and now it won't boot. I download a Windows 7 64 bit recovery ISO and burned it to disk then popped it in the drive and restarted the computer but it still won't boot. I even went into BIOS settings and made sure that the CD/DVD drive is first in line in the boot order. It still won't boot.Not sure what to do from here. I'm a Mac user, my daughter has the Windows 7 computer, so I'm not exactly very well-versed in that operating system. Upgrading the hard drive on my Mac was very easy, no merging of partitions needed. How do I get my daughter's computer running and get the partitions merged?
View 6 Replies
View Related
Sep 25, 2012
Since there is no cd/dvd drive in a Dell Inspiron Duo1090, how is the OS reinstalled. Can it be done from a USB Drive? An external CD/DVD reader? Does the new drive need to be set up via USB from another computer? Does the DUO have to go back to Dell?
View 5 Replies
View Related
Oct 30, 2011
I had to replace a hard drive on a new computer. It was not backed up. A recovery disk and new harddrive was sent. I transferred everything but got all the way to the point of configuring windows for new computer. Then it would state must re-install...then administrater locked screen would appear but with no way to enter password. A new recovery disc was sent and installed. Problem is i can't find anything from my old harddrive. Where can i look for files to recover them.Are they still on the old hard drive?
View 2 Replies
View Related
Jun 3, 2011
It's a dell latitude, 1 year old. Laptop suddenly crashed and when the laptop booted it said: "no boot sector on internal hard drive". I tried repairing the boot sector with the windows repair function, but the hard drive is just empty... nothing to repair. Then I tried to boot off a ubuntu live cd. which worked. and showed me an empty hard drive with the_maximum_capacity_of_the_drive_GB of unallocated space.
Since that I reinstalled windows 7 two times, and stopped working after an hour or so. I installed ubuntu, which worked for several days. then i tried windows 7 again (clean install). And then I kept working on the laptop for a couple of hours until the "crash" happened. All the programs stopped working suddenly. When I opened anything I was shown this error: "Illegal operation attempted on a registry key that has been marked for deletion."
After that everything is lost if I turn the computer off. And I'm back at an empty unformatted hard drive. I changed the sata operation mode in the bios to different options before every installation of windows. I didn't try xp, because I don't have dell-xp cd's . Is the hard drive broken? I guess not because ubuntu works. and windows 7 also, but it just goes away suddenly... Here's a video (shot in portraitmode) of the event... [URL].
View 8 Replies
View Related
Sep 28, 2009
I recently built a computer with only one drive, I was wondering if it is possible to install another one and have them runing on raid 0 or do you suggest another type of raid maybe with 3 drives.
I have an asus mobo p5q3 so I can use Drive Xpert technology but a lot of reviews says that the speed of the drives is split in two when using these 2 sata connection (white and orange).
View 9 Replies
View Related
May 30, 2011
I just purchased a new 10,000 RPM VelociRaptor drive and I'm going to use it as my OS drive. Is it possible to set up a RAID 0 with my current drive (hitachi 1TB 7200RPM) without having to format it?
View 7 Replies
View Related
Oct 27, 2012
I am doing a quick windows build here on a couple of computers and want to RAID 1 the windows C drive. The motherboard i got for them does not support RAID (I kinda figured it would). So now i was thinking of just doing a software RAID in windows. I got the C drive to mirror each other in disk management but the issue seems to be booting. When the computer starts it asks which hard drive i want to boot from and when i simulate hard drive failure the boot manager doesn't come up at all and i am stuck with the no boot device error. My guessing is that there is something on the 100MB system partition that isn't copying over.
View 5 Replies
View Related
Jan 5, 2013
until recently I had an XP PC with a single main OS IDE HD. To backup I performed monthly an Acronis clone to an identical 2nd IDE HD that I bought for this purpose. Easy.
Now I have a Windows 7 PC with two identical SSD's in RAID0 as main OS drive and a 2nd internal HD. I would like to perform a backup of this system so that I can later restore it to any HD configuration I choose (for example a single SSD, or a single HD, etc). Is this possible or the restore will need to be done to the same original configuration (two SSD's in RAID0+2nd int HD)? What would be the simplest software that will accomplish this?
View 4 Replies
View Related
Nov 20, 2010
My PC is currently using a single RAID 0 drive that contains my Windows install and all my data in a single partition C: (I'm well backed up so happy with the risk of RAID0)
The RAID0 drive is setup by my motherboard controller so Windows just sees the one drive.
I am thinking of adding an separate drive for windows, hopefully an SSD. I would like to do a fresh install of Windows 7 on the new disk then rename the old RAID0 drive to something different such as D: . Then reorganise it into just a data disk.
My question is.. will the new Windows 7 installation just see the old RAID0 disk as another disk? I know this would work witha normal disk, but does RAID0 transfer over to a new installation ok?
View 1 Replies
View Related
May 29, 2012
Just wondering what or if I could move an xp backup onto a raid 0 drive. I did setup the drives in raid in the bios, and they show as raid. I booted into my marcium backup and ran my xp backup onto the drive, that showed in marcium as a raid 0 drive. When I booted, which went fine, into xp it shows in disk management as raid 0. But the problem is, it shows two drives, together and the 2nd drive as being un partitioned. Therefore I'm only running on one drive. Is this fixable, or do I need a clean install?
View 2 Replies
View Related
Aug 1, 2009
I'm trying to install Windows 7 64-bit on my brand new custom PC, using a RAID0 drive array. I already set the array in the BIOS, and the BIOS sees it. All shall be going to plan...
Nope.
The beginning of the install goes fine, I accept the Terms and all that good stuff, it's loading files, yadadada.. but when it gets to the part where it's asking me where Windows 7 is asking me what drive it should be on, nothing is there. It asks for drivers (my SB750 RAID drivers) so it can find the drives, I put in my USB flash drive with the RAID drivers (I tried both from disk and website), it tells me that no new devices could be found.
I don't think it's a problem with my physical computer, So it's either that I messed something up in the BIOS or Windows 7 is being picky on it's RAID arrays.
View 2 Replies
View Related
Jan 15, 2013
I am about to reformat my hard drive, long story as to why, but I am starting from scratch. I know how to install windows, drivers etc. But one thing I am not sure about is configuring the RAID, as I wasn't the one who did it when we installed everything. I am asunming that when I reformat the RAID will need to be reconfigured? I have RAID 5 with three hard drives, each 500 GB. I have a program called Intel Rapid Storage Technology that "manages" the hard drives,but if I am correct I have to set up RAID before installing windows. How to configure the RAID the same way I currently have it? This is a homebuilt comp, i7 930 2.8 ghz, 6 GB RAM, Windows 7 Pro 64-bit, Gigabyte motherboard...
View 1 Replies
View Related
Feb 10, 2012
My Laptop came with Raid 0 over 2 one terrabyte harddisks. Last week i started getting Drive 1 at risk message. I looked it up and it turns out that this message occurs some time before your drive fails.I did a Full computer backup using windows Back up utility using an external Hard drive. Now I'm going to buy a new internal Hard drive to replace the faulty one.What are the steps i have to do to back up properly?After some search,I learned that:
1_ Backup everything.
2_ Replace Faulty drive.
3_ Rebuild Raid 0 array.
4_ Restore the system image.
Does the new internal Hard drive have to be the same brand/type/size as the old Faulty hard drive? Also I've never used Raid, so how do i recreate a new raid 0 array ? From Bios ? Should i create a repair disk too ? or would Windows dvd work?
View 1 Replies
View Related
Jan 3, 2013
RAID-1 DRIVE PULL OUT TO TRANSFER ...
I have a pair of mirrored RAID-1 drives (these have been removed and sitting as is for about 6months or so)
There is no important data on this that im concerned about preserving.
What i want to do is reformat them into 2 separate single storage HDD'safter installing them into my new system. or will it mess up my new system?
View 2 Replies
View Related
Nov 13, 2009
I installed a Rosewell RC-217 Raid card (Silicon Image Sil 3124 SoftRaid 5 Controller-- in Device Manager). The card installed well in Windows 7 64 bit. No problems in device manager.The problem starts when i plug the drive in then rebooted. The boot stops at the 'Starting Window' and hangs. If i boot into windows then plug the drive in all work well. Windows sees the drive and i gave it a drive letter. works great.Problem is i can't boot my system without un-pluging the drive.
View 6 Replies
View Related
May 17, 2011
I am installing Windows 7 pro 32 bit on a machine with no floppy drive.The mobo is Asus p5b and intel e6600 core 2 duo cpu.how can i get raid drivers on to machine without floppy drive.can i use usb pendrive? or can i install driver after i have installed Windows 7 pro?
View 3 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
Aug 24, 2012
I need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies
View Related
Jul 16, 2012
I have set up a dual boot- Windows 7 pro & XP ultimate, both on separate SSD's, all OK. I also have two 3TB HDD's set up under windows 7 RAID, all OK. In XP under drive management the RAID drives show up twice, once as 775GB unused drives with no drive letter allocated and also as 2.7GB RAID drives with status 'failed', drives marked as 'missing'. Is there a way I can get the RAID drive accessible under XP?
View 8 Replies
View Related
Sep 27, 2011
My SSD main drive is running low on space .My motherboard supports 2, SATA3 connections.My current drives are SATA2 SSD main drive and a SATA3 1TB media drive.If I were to add 2 SATA3 SSD's in RAID, does that use up both the SATA3 ports on the motherboard? or do they just combine and use 1?
View 1 Replies
View Related