it installed o.k and in my computer shows disk d,I only want to use this as storage,but whenever i download anything and want to send it to d it isn;t in the drop down menu,its showing in the sidebar i can drag the files across into d and works o.k.but am mystified why i cant get it in dropdown.have formatted drive,in the disc manager it shows healthy and active.
by the way i think windows 7 is running great couple of teething troubles but o.k
I am running windows 7, I was able to connect to the internet via WiFi the whole time, now I am unable to do so. I have bought a new Lenovo laptop and I am now having a problem that tells me "invalid IP config" the whole time.
I have an HTPC that I've had for about 4 years now. Today when I booted it up it went into an infinite loop with the 'Startup Repair Utility" where it would just sit there claiming to be repairing the drive but never actually completing or providing a notification of the issues (typical Microsoft troubleshooting). Anyway, I finally was able to get into the advanced settings of the utility and get to a command prompt and see what was going on.
1)The previous RAID 1 configuration was setup as the main C: drive with the OS and also where I had all our music stored. But now during the boot sequence the bios startup it flashes in red complaining about the RAID array having degraded and when I finally got into a command prompt it was no longer mapped to C:, the two drives in the array were mapping independently as drive E: and F: respectively (the DVD-ROM is the D: drive).
2)My first concern was to get my music off it so I plugged in an external USB drive and went into command prompt and tried to xcopy from E:, it started to copy then failed catastrophically with a weird error so that would appear to be the bad drive. I then tried the same thing on drive F: (the mirror) and its cranking along nicely copying all my music over. My fingers are crossed but I suspect I'll be OK, its unlikely to get two drive failures in the same array at the exact same time
Once I get my data off the good drive how should I proceed? I assume I need to get a new duplicate drive installed and then can I not rebuild the RAID array from the good drive? I've never done this before, the machine came built for me so I'm not familiar how it is setup. What I do know is that it has a 'RAID utility' you can jump into at boot up by hitting F10.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
After installing three or four updates yesterday my laptop now clicks the optical drive a couple of times as I start any video or music file on the hard drive. Not a fatal flaw, but, very irritating just the same. Did a system restore to the morning before the updates- same behavior remains. Installed updates again, removed them one at a time, same thing. Restored to over a week ago, same behavior! What is up with this clicking. The files start and play immediately, no problem there, I'd just like the optical drive to mind it's own business. Movie discs play fine, burns stuff fine, just go to your corner and SHUT UP!
Yesterday i found out that my rear and centre speakers were producing really low sound. After a restart, Windows lost the ability to set it on 5.1 speaker config. It would just revert back to 2.1. I did a reinstall of the drivers but no luck.
PC Specs: Intel i5 750 @stock 4GB RAM SB Audigy 2 ZS Windows 7 x64 Logitech X-540
i have window 7 test version installed however When i tried to install Act of war: Direct action, it didn't work and since i have herd how the game does not like more than 3 GB of rams i change the MSconfig settings and set a limit on the memory from the Advance options after i restarted my computer it crashed...and i am unable to undo the msconfig changes, because i am unable to access msconfig i have tried to boot into safemode and load msconfig, however it says i do not have the privileged to access msconfig...i have tried the automatic repair in window 7... and it didn't work anyother ways to undo it?i have a lot of accessments in the C: drive which i have not backed up?
I'm planning on buying an Asus Zenbook UX32VD soon and it comes with a standard 7200 rpm drive instead of an SSD. So because of that i want to upgrade it to an SSD drive.But I also want to have the same windows thats installed moved over to the new drive. The drives i've looked at all have data migration tools and one comes with norton ghost but i've never had to do something like this before where i didn't have an optical drive and a windows disk for a reinstall so i'm looking for some help here before i order everything and then do something stupid.i don't mind if i have to lose whatever settings and data i might have setup already, but i just want to make sure i have the same windows and the additions it comes with moved over to the new SSD drive.
I just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
had installed a second hard drive (seagate) sata and was installing windoews 7. I went away while the install was going on and came back to a computer that would not boot. tried the cdrom/dvd with linux live and got to linux mint 11.10 and then the compute just crashed and now, nothing even after a cmos short. cd and drives show on splash screen, but cd does not start to load. all i hear is a tick repeatedly. tried a disconnect of the cd/dvd drive and nothing.
I have an Alienware M14x R1 with a SSD - Crucial M4 in the main spot and the stock HD in the optical drive. I have never had any issues with any of this stuff before this clean install - and I have done clean installs previously. I also used Parted Magic to Secure Erase my SSD and HD before install.I am experiencing some pretty frustrating problems:
1. I have NO INTERNET CONNECTION (everyone keeps telling me to install drivers...how can I do this without internet connection??)
2. Windows is not recognizing my second hard drive in the optical drive even though it did when I was installing and showed it at the section where you can add new partitions etc
3. My display adpater is not working as I have a 1600x900 screen and I can only go up to 1024x768...
i have a (spinning) hard-drive with my windows 7system and data on it. it is up to date to this month. the hard-drive is a 320gb. there is jsut 69gb used on the 320gb.i just bought a 256 gb SSD (solid state HD). i would like to place everything on the 256 and put IT in my laptop. i have saved a system image of the 320gb on DVD. windows seems to want an exact size (320gb) to restore the system to.
I config my host file to go facebook (my country prevent me to go there ) and It work probably to one day... I cannot go to facebook, and I checked my host file again. It's still no change from that time, but there is a small thing: host file now has a key icon at left-bottom. (That I'm sure it doesn't appear before).
OS installed on SDD ..(Windows 7 Ultimate 64bit) I have a seperate 1TB HDD installed - partioned into 2 volumes. (D & E) I would like that the OS puts all programs by default onto D:I know some programs give you option to select location but not all ... can I setup that 'progam' folder is on D.
