Virtualizing A Raw Host Drive As External Drive Threw Another Com
Apr 4, 2011
i got a new processor, the o.c software and teh bios filed to set on auto, so i had to do it manually..over and over and over and over again. around 8 am i started to tweak the setting on the o.c software and in my slep deprived state i did something very stupid..i set the o.c software to load the last setting on startup.afterward i hit a setting the crashed the computer, so now i can't boot it, cuase the o.c software is loading those com crashing setting on startup. so i when to use a back up harddrive which was empty, so i am now using teh computer with a fresh hdd. the other hardrive is as it was when i screwed up royal.all ihave to do is load internal harddrive on my external hdd dock, in a virtualized environment which i looked for help threw google, which lead me to virtual box..which was 3 hours of wasted time, then i ran another search which lead me here eventaully, which referred me VMware, so i went to VMware only to find a god awful amount of crap i don't need and getting support from them was a joke, put in a ticket and await..wait..wait..wait, two hours later , i come back here. i had no idea what api from VMware to go and get most of it seems like its meant for servers, and im not running a server.i have a hdd thats good, in a external dock, i can load its internal working threw my computer, but i need it virtaulized in order to uncheck that box in the o.c software so it doesn't load on startup, thats it >.<
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive.So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive?Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file individually?
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive. So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive? Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file, individually, would be ideal.
I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
Seems to be going like bonkers most of the time and is affecting the perfomance of opening applications, running games etc.
I have checked resource monitor and Just says the SVC host (restrcited) is doing stuff!
I have no ideas how to look further into this to attempt a resolution or whether it should be doing this or not. Just seems abnormal to me, don't remember the same hardrive going so mad on XP?
I have some programs start on boot, but nothing out of the ordinary, ATI, PCsuite, Bluetooth(for phone) and AVG. But that is it, with those running or not it doesn't seem to make a difference??
This might be a silly question, but I'm having a terrible time trying to access files on the host machine (Windows 7) through the command prompt within the Virtual Machine (XP). I can see the drives in Explorer (e.g. C on VAULT_CORE_I&) and I see sclientc in the prompt, but I have no idea how to access the drive from the prompt.
I'm trying to help out a colleague who runs an old FORTRAN compiler and does alot of his engineering calcs with it, and would not work in Windows 7 (but it is working in XP Mode). However, I'd like to keep the files on his Windows 7 machine and not contain them inside the virtual machine.
Windows backup is set up to not allow backups onto the C drive (or whatever drive windows is installed on), which generally makes sense. But I have a C drive with a lot of empty space, and an external hard drive that I need to back up. So... is there any way to get around the default behavior so I can back up FROM the external drive TO the C drive?
I don't have Windows 7 yet, but I'm just about to install it, but I figure it may be safe to do a back up first. I'm about to do an upgrade from Vista 64-bit to Windows 7 64-bit. I did find these recommendations:"An image backup of your hard drive offers an easy, dependable way to do just that, since it restores everything on the hard drive: Windows, applications, data, and even the Master Boot Record. To create one, you'll need an external hard drive, and an image backup program.
I have an external western digital HD which is 2x 500gb sata drives that mount to 1tb, I assume there bridged to make the 1 TB possible my question is that ive decided to put these in my pc case(couldnt do it before) as media drives etc, I put both in, but my pc only sees the one 500gb drive is there anything I can do for me to see both.
EDIT also ive just noticved I can actualy see the non working drive in BIOS.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
i`ve saved alot of my files i had on my previous os (xp pro) on my expansion external drive. now i`m running on windows 7 i can not access the drive as it says it needs formatting. i`ve looked in disk manager and it is showing RAW. i really need these files and they are they only back up i have. i wouldv`e thought it would have been a simple install but it`s proving very different. my expansion drive is a seagat 1TB.
i have a toshoba satellite with windows 7 home version I have a couple of old 2.5 hard drives from an old IBM thinkpad that I want to get the pictures from. I bought a SATA/IDE USB cable and plugged it in after a while it loaded and i could see the drive in "my computer", and I could access all the pictures, which was great. (unfortunately I didn't copy across the pictures..). I then tried the second drive, that one hung during the loading process. however since then my laptop just doesn't see either of the drives when I plug them in. Just for clarity have only tried them one at a time and I they both power up.
Why is it that so many Western Digital products suck at what they do? Every time I tried using a storage device by WD it's been acting up. One time a drive wasn't even being detected by a computer (or other computers I've tried it on) and now this new 1 TB external drive is not wanting to disconnect safely from my laptop. I did a ton of searching online and apparently, despite it not actually saving anything it's still running processes as if the person who made it assumed you don't ever want to disconnect it from your computer (which is stupid for the fact one shuts off his computer eventually at one poine) and instead want to constantly back up weekly. I made one backup and that's all I want to do at the moment. I also want to shut off my computer, but if I do that while I still get the error message "can't disconnect external drive since it's still in use", wouldn't shutting the computer down then be equivalent to unplugging the drive before it's "safe" to remove? I literally waited a full day to get my 350 GB info on this drive, and I don't want it to get corrupted through unplugging or even shutting down the computer when the drive is "still in use".By the way, it says it's "in use" but I am NOT seeing it download or backup anything (because I already finished this hours ago). Could it be that it's saving something that I'm not aware of? Or is it simply "connected" to my computer and that is one of WD's definitions of "currently in use"? If the latter is true, I guess logging off/shutting down won't do anything then, but I'd still like to be sure.
1. I have a 500 gb HD C and using a empty 2 TB external Drive, it gets to a point (different each time) stops and says nt enough space.
2. This stopping of backking up is annoying in itself. So I hit to restart back up and instead of it continuing whare it left of from the other BU it begins a whole new Bakup. This Time I have 2003 zipped files while the last 2 times I had like 316 on one and 988 on another.
Is this just win 7 and its back ups? I have 2 other programs I can use Nero back up and Mameo, should I reformat disk and try one o them?
I need help with external drive! I don't why ,but it shuts itself down every time I wake computer from sleep or hibernation! Disk is Maxtor ,model STM305004N1AAA-RK ,it is in Spire Gigapod II external box ,connected via IEEE 1394! In properties it is shown as Prolific PL3507 Combo Device!
There was no such problem in Windows 7 builds 7000 and 7057 ,but it started since I've made upgrade to 7068 and now to 7077. And there is also problem when I switch from Windows 7 to XP PC don't see it! I have to shut it off and on again every time!
I just got an external hard drive yesterday, and have been asking a few questions on this forum. So far, people have managed to be very helpful with the previous questions, hopefully someone can do so here too.Reinstalling all my games to external hard drive, need to know if they will / how to make them appear / function properly in my GEF, whether added automatically or manually.I am basically going to have EVERYTHING put onto my 1TB external, and by everything I mean "Music, Pictures, Videos, Documents, Games, and maybe Programs". So, I made a folder for each of those things on it,and only now that I am reinstalling my games into the Programs one have I realized something.I am a bit obsessive about having a fully functioning Game Explorer Folder (GEF) with all my games visible in it. It's my assumption that when I install into an external hard drive, none of those games will be automatically added into the GEF. However, if I add them in manually (using the regedit method in the tutorial), should everything function properly, so long as I have my external hard drive on whenever I use the computer?I just need this to be confirmed before I start reinstalling more. Also, if not, please let me know if there IS a way to get them to show up in my GEF properly, or possibly move the GEF to the external hard drive or get it to recognize things from a different directory.
I opened my computer the other day...Sony Vaio...and for some reason the whole thing was completely shot. It just said it could not open/start Windows, and other error messages. I tried the restore disc which didn't work, and a message said that I need to reinstall from manufacturers CD. I went through the Vaio recovery and backed up all the files/system files to an external drive. I reinstalled Win 7 and was wondering if there is anyway to restore back into my original settings. I have installed many apps and have settings on each and it would be a pain to have to go into each application and redo all my settings all over again one by one.I am grateful that I was able to save all my data at least. And on the bright side, at least I got rid of all the junk I didn't need any more.
When you open a file (document, audio, photo, etc.) from an external drive (such as a USB drive or external disk drive), do any remnants of that file remain on the hard drive of the computer on which you opened it? I am mainly concerned with Windows based systems.I ask this because I am borrowing a laptop from a friend and some of the files on a USB drive are personal documents and family photos which I would prefer not to leave behind.I know document names will remain in recent documents on some versions of Windows and that's fine, but is there an actual copy of a file kept temporarily on a hard drive on any Windows version? The machine I am using has Windows 7 32-bit on it.
i have a 1Tb external Drive (USB) and its never had any problems until now. I just recently reinstalled windows and when I try plugging in my external drive and then powering it on. My PC doesn't recognize it. I know that it knows its plugged in because it is showing up in Device manager and it is showing up as the "Safely remove usb" in the task bar.
I have install a 3.5" harddisk on a USB 3.0 external casing, when I plug it into the USB 3.0 port, it come up a while (like 30 seconds) then disappear, and never to be seen again. If plug into a USB 2.0 post the same thing happen. The following are my PC configuration:
Windows 7 Pro x64 SP1 Asus P7P55D-E Pro BOIS version: 1602 USB 2.0 : Intel 5 Series/3400 Series Chipset, Driver version: 9.1.1.1020 USB 3.0 : Renesas Electroincs USB 3.0 Host Controller, Driver version: 2.1.28.0, FW: 3025 External casing is HUR1-SU3S2 with single WD20EARX harddisk.
In the begining, I thought it is the problem of the external casing, but when I tested in a laptop running Windows 7, it is working fine on a USB 2.0 port.
I have a 1TB WD external drive that i was still using until last week when it failed to open. It shows in My Computer as a drive letter J but it doesn't show the usual capacity and free space. Disk management detects it though. Then opening the drive gives me the message that the drive needs to be reformatted before it can be used. I don't want to loose the 900GB files I have in it so I tried some recovery programs like Wondershare but it only recovered 10GB of my files.
I recently got a Toshiba Canvio 2tb USB 3.0 external drive. When I transfer anything I get very low transfer speed, around 11mb/s. I computer has USB 3.0 ports. I transfer a lot of small files, like music, but I get very slow speeds even when I'm transferring movies that are 5gb+
I have a laptop with a broken LCD. I can hook it up to a monitor to use, but the monitor doesn't work until Windows starts. I am trying to install XP onto the hard drive from my Windows 7 computer but am getting the "blocked due to compatibility issues" message. Is it possible to do it?
I have a 20GB laptop HDD in an enclosure at the moment. I want to copy the Windows 7 setup files from the extracted ISO to that drive for installation. I did this with XP by using the following:
Code: C:xp3I386winnt32.exe /syspart:E: /tempdrive:E: /makelocalsource /noreboot For the XP install I hooked up the drive via a usb-to-ide interface to another laptop and then ran that line from a command prompt and stepped through copying the needed setup files to the drive.
From there I placed the HDD into the desired laptop (no working cd/dvd rom) and booted up into Windows setup. I do not believe this will work for 7 as there seems to be a directory structure difference to say the least. I wonder if that would still work had I the correct syntax though...
Is it possible to do this with Windows 7?
*The laptop is a DELL Inspiron 1100. The BIOS does not support booting from a USB device.
