i have a toshoba satellite with windows 7 home version I have a couple of old 2.5 hard drives from an old IBM thinkpad that I want to get the pictures from. I bought a SATA/IDE USB cable and plugged it in after a while it loaded and i could see the drive in "my computer", and I could access all the pictures, which was great. (unfortunately I didn't copy across the pictures..). I then tried the second drive, that one hung during the loading process. however since then my laptop just doesn't see either of the drives when I plug them in. Just for clarity have only tried them one at a time and I they both power up.
I'm new to this. I was working with Windows 7 32 bit and recently decided to take advantage of more RAM for recording music by upgrading to Windows 7 64 bit. However, after the upgrade installation my WD MyBook Studio II 2tb is no longer recognized in "My Computer" when I hook it through firewire OR USB (Yet all other devices work as they should) - So I've been to Disk Management and it shows up as a disk. However, there is still no letter assigned to it. When I right click on it, the only option is to delete volume. As you can see in this picture it shows up as disk 2 with three separate regions.
Now, when I hook it up to a MacBook running Leopard the WD MyBook Studio II works just fine and all of the files are accessible. I've also tried uninstalling the drivers, powering down and reconnecting, updating drivers. I've also switched my firewire controllers to (Legacy) in Device Manager. I still am not able to access my external drive within Windows 7 64 bit Home Premium - YET it worked great with 32 bit.
I can't remember if I disconnected the external drive from the computer when I upgraded Windows, but would that potentially have affected the install? How do I get access to my external drive if it won't show up in "My Computer" when it shows up perfectly fine on the MacBook running Leopard? Right now I'm using just less than half of the drive at around 800 GB and it's made up of two separate 1tb drives. I'm completely lost. Does anyone know a solution to my problem?Also: Windows lists my specific external drive as compatible with Windows 7 64 bit.
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
My 32 bit IE has not worked for a long time I have tried everything and finally tried turning off my add ons and it worked so I went back and tried turning them off one by one and counld not find the one that is causing the problem. Im not even sure what these add ons do im not very advanced in pcs I can just follow instructions.
I have a backup .bat that I have hobbled together from forums such as this. The original was made a few years ago. It worked flawlessly, until I brought it to windows 7. Very funny, now, it only works between 10am and midnight. This has been hell to figure out because sometimes it works and sometimes it doesn't. I know it has something to do with the context of the "set hour" or "if "%hour.." part, but I can't figure it out. Should be an easy fix for someone familiar with .bat programming. Here is the relevant part:
Code: set hour=%time:~0,2% if "%hour:0,1%"==" "set hour=0%time:~1,1% set folder=%date:~10,4%_%date:~4,2%_%date:~7,2%-%hour%.%time:~3,2% set DateFolder=%date:~10,4%_%date:~4,2%_%date:7,2%
I have built all of the PCs currently in use - one that my youngest has access to has an MSI Motherboard in it (sorry haven't got the mobo manual to hand at the moment.Purchased an upgrade from Windows XP Pro to Windows 7 as youngest in education got a discount on the upgrade. Windows XP has to be present at point of install - cannot be a direct install or installation upgrade from within XP. In XP all the USB ports work normally but in 7 the bottom 2 (USB2) are 'dead' in 7. The MSI forum begs to differ. And I know not to add any USB peripheral device before installing software. Processor is a 2.4 Ghz AMD Athlon 64 AM2 Processor and an AGP card (8x) that requires two power sources. Power supply is 450 W - is this too low? 1 Gb 400 MHz RAM, 170 Gb Hard Drive shared equally between Windows XP and 7.
As the titel says I have a software (a messenger for textbased RPGs similar to Skype, so it is nothing illegal) I want to run twice.
Before I had Windows XP with the same software and it worked like a carm with "Run as user..." After getting a new computer which runs with Windows 7 Premium Home x64 I installed the exact same version of the software, it simply won't open another instance with the "Run as user..." command.
As it is the same software version there can't be any lock within the software to prevent multiple instances as it worked on XP before. So I assume maybe it is some setting in Windows 7 but I haven't found anything useful yet. go through using VM or anything like this just for a simple messenger
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive.So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive?Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file individually?
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive. So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive? Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file, individually, would be ideal.
I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
i got a new processor, the o.c software and teh bios filed to set on auto, so i had to do it manually..over and over and over and over again. around 8 am i started to tweak the setting on the o.c software and in my slep deprived state i did something very stupid..i set the o.c software to load the last setting on startup.afterward i hit a setting the crashed the computer, so now i can't boot it, cuase the o.c software is loading those com crashing setting on startup. so i when to use a back up harddrive which was empty, so i am now using teh computer with a fresh hdd. the other hardrive is as it was when i screwed up royal.all ihave to do is load internal harddrive on my external hdd dock, in a virtualized environment which i looked for help threw google, which lead me to virtual box..which was 3 hours of wasted time, then i ran another search which lead me here eventaully, which referred me VMware, so i went to VMware only to find a god awful amount of crap i don't need and getting support from them was a joke, put in a ticket and await..wait..wait..wait, two hours later , i come back here. i had no idea what api from VMware to go and get most of it seems like its meant for servers, and im not running a server.i have a hdd thats good, in a external dock, i can load its internal working threw my computer, but i need it virtaulized in order to uncheck that box in the o.c software so it doesn't load on startup, thats it >.<
I have Windows 7 ultimate installed. I used the Task scheduler one time to do a Shutdown of it set at 10pm it worked fine one night now when i set it for a different day it does not work anymore. i have the right trigger, time and date etc set correctly WTH.
I was importing Pix from my Kodak Easy Share camera. After doing that, I unplugged my USB plug, but inadvertently unplugged my Ext HD USb plug(formerly Drive F). I then removed the USB for the camera and then plugged in the HD USB plug.
My computer now showed my Camera as an external device. I uninstalled it. I turned off the computer, but still I can't access the F drive. Finding the device via Ctrl Panel doesn't help either.
I had dual monitors working from Vista desktop, using a VGA/DVI from a single video card. Last week, the HDD failed, so I figured it was time to step up to Win7. Bought Win7 Home Premium, bought HDD and installed.... See dual copies on monitor screens during boot, but when the boot goes to switch over to the HDD, both screen go and remain blank... Hitting keys and moving mouse, I hear disk noise that leads me to believe the machine is processing my input, but I just can't see it. Confirmed by disconnecting one monitor. The machine boots fine w/single monitor hooked up, so it doesn't appear to be a "sour" install. Just odd that everything worked fine in Vista, but balks in Win7.
Windows backup is set up to not allow backups onto the C drive (or whatever drive windows is installed on), which generally makes sense. But I have a C drive with a lot of empty space, and an external hard drive that I need to back up. So... is there any way to get around the default behavior so I can back up FROM the external drive TO the C drive?
I don't have Windows 7 yet, but I'm just about to install it, but I figure it may be safe to do a back up first. I'm about to do an upgrade from Vista 64-bit to Windows 7 64-bit. I did find these recommendations:"An image backup of your hard drive offers an easy, dependable way to do just that, since it restores everything on the hard drive: Windows, applications, data, and even the Master Boot Record. To create one, you'll need an external hard drive, and an image backup program.
I have an external western digital HD which is 2x 500gb sata drives that mount to 1tb, I assume there bridged to make the 1 TB possible my question is that ive decided to put these in my pc case(couldnt do it before) as media drives etc, I put both in, but my pc only sees the one 500gb drive is there anything I can do for me to see both.
EDIT also ive just noticved I can actualy see the non working drive in BIOS.
I have a USB DVB card that works good! 3 days ago I have working on virtual com ports in matlab soft! and after that when I connect dvb card to my laptop usb ports the dvb software doesn't detect dvb card! and shows this message: all capable dvb adapters are busyno free device has been found after that I try to reinstall matlab and dvb soft and dvb driver too, but it hasn't work yet
I got a new laptop but it has windows 7. 1 of the extremely huge problems this operating system has is this absurd thing where you cant arrange your own files in the order that you want.Im not gna waste my time ranting on here as it wont make any difference, but it does astound me that microsoft would employ such thickos who were unable to create an OS that was capable of offering such a basic function! i followed the (this) registry-edit steps lastnight to enable free-positioning of my files (unawave. de/windows-7-tipps/disable-sorting-auto-arrange.html?lang=EN).I did it lastnight and it worked perfectly!I then turned my laptop off as it needed to install its daily updates, but when i restarted it i can no longer move my files around in my pictures/videos/or my music folders!Photo/video files in other folders can still be moved around freely, however as all my pictures and videos are saved by default into those 2 folders this causes me a huge problem!
My harddrive went out and I put a new one in. It was a brand new drive and I loaded Windows 7 Home Premium 64bit from my laptop's recovery disk that came with the inital purchase. When I started to add the drivers 2 of them came up as unable to verify the signatures. Most importantly the driver for my Wifi adapter, which is an Intel Wifi Link 1000 BGN says this. Windows refuses to run it in that state. So I have no internet and it says that the adapter is not installed or is disabled. When I go into the Device Manager the adapter is there with a yellow "!" and has an error code 52 (for unsigned driver). It shows installed and enabled though I installed the driver from the intial driver disc and it says unsigned, I was able to get the latest driver from Intel's website and that too says it can't verify the digital signature.When I boot into the F8 screen and disable driver enforcement I am able to get online.I'm not sure if this is related or not, but regardless of how I boot, Windows updater and troubleshooters do not work.
I have had high definition audio device in my system which never worked despite much effort. Finally I bought a new sound card and installed it's software from it's CD. The sound function started working but now I am again seeing the red cross on volume icon which says no audio output device is installed. I went to device manager but I can't see the new sound card there so that I can reinstall it's driver.
got a dell 531s aint sure for the specs right off hand, BUT i got this error code after putting my hard drive into a different tower an I can NOT get it to go away.i've done everything possible that I'd found online an everything. I'm ready to just part it out to my sister & brother in laws but my fiance needs a computer
i`ve saved alot of my files i had on my previous os (xp pro) on my expansion external drive. now i`m running on windows 7 i can not access the drive as it says it needs formatting. i`ve looked in disk manager and it is showing RAW. i really need these files and they are they only back up i have. i wouldv`e thought it would have been a simple install but it`s proving very different. my expansion drive is a seagat 1TB.
Why is it that so many Western Digital products suck at what they do? Every time I tried using a storage device by WD it's been acting up. One time a drive wasn't even being detected by a computer (or other computers I've tried it on) and now this new 1 TB external drive is not wanting to disconnect safely from my laptop. I did a ton of searching online and apparently, despite it not actually saving anything it's still running processes as if the person who made it assumed you don't ever want to disconnect it from your computer (which is stupid for the fact one shuts off his computer eventually at one poine) and instead want to constantly back up weekly. I made one backup and that's all I want to do at the moment. I also want to shut off my computer, but if I do that while I still get the error message "can't disconnect external drive since it's still in use", wouldn't shutting the computer down then be equivalent to unplugging the drive before it's "safe" to remove? I literally waited a full day to get my 350 GB info on this drive, and I don't want it to get corrupted through unplugging or even shutting down the computer when the drive is "still in use".By the way, it says it's "in use" but I am NOT seeing it download or backup anything (because I already finished this hours ago). Could it be that it's saving something that I'm not aware of? Or is it simply "connected" to my computer and that is one of WD's definitions of "currently in use"? If the latter is true, I guess logging off/shutting down won't do anything then, but I'd still like to be sure.
