Hitachi Ext HD Worked Fine Until Importing Pix From Camera

Sep 25, 2011

I was importing Pix from my Kodak Easy Share camera. After doing that, I unplugged my USB plug, but inadvertently unplugged my Ext HD USb plug(formerly Drive F). I then removed the USB for the camera and then plugged in the HD USB plug.

My computer now showed my Camera as an external device. I uninstalled it. I turned off the computer, but still I can't access the F drive. Finding the device via Ctrl Panel doesn't help either.

View 3 Replies


ADVERTISEMENT

Installs Fine, Runs Fine, Reboots..not Fine

May 20, 2009

so i finally decided to install Windows 7 x86 - everything went well - put all the standard stuff on there etc - i rebooted many times because of installations and updates

on my last reboot it just got stock in the bios screen (verifying dmi pool data..success! etc)

so i rebooted, same thing, took the disc out, same thing - turned off boot devices same thing

tried to use window's useless repair tools (whatever happened to repair install?) which didn't help - so i decided to format and reinstall - then it says it was unable to do that (partition error or something)


the annoying this is...is that this EXACT..i mean EXACT same thing happened when i installed vista sp1 from scratch - this happened - and to fix it i had to leave my pc open overnight with the hard drive cables all unplugged..in the morning with my fingers crossed i tried the installation again - and it worked.

my d: always disappears (single hard disk sata 233gig (250)) - sometimes it'll vanish from my computer and stuff - but this can't be the problem because the d: is a single drive on its own - my c: is a25gig partition from my e: - so it's completely unrelated.

does it matter how i replug the sata cables (2 of them) into the mother board? - they're both being recognised anyway

this is really annoying though - mostly because there isn't really an explanation - and because this random stuff always happens to my pc! - is it my hard drive because that's the only thing that would half- make sense

View 5 Replies View Related

Hitachi 4TB Deckstar Only Showing Up As 1.7 TB?

Apr 23, 2012

I have a Dell XPS 8300. I just threw a Hitachi Deckstar 4TB drive in. It shows as 4TB in the BIOS. But in the disk management tool, it's only showing up as 1.7! I have 24X3TB (yes, 72TB) of drives attached via USB3, and they're showing just fine, so it's not the 2TB limit.

View 1 Replies View Related

Win 7 Install On A Hitachi 1T Drive

Jan 22, 2010

OK, I have an ASUS P5k Pro with the latest BIOS installed with Window 7 Pro 64 BIT. I just bought 2 SATA 1T Hitachi drives (HDS7210CLA332). All sata drives are set o IDE in the BIOS.

At first I added the two drives to my existing Windows 7 installation and all seemed fine, but I did notice that it installed some sort of driver, but couldn't figure out what it was. The drives were recognized after I did a reboot. (The same thing happen in XP SP3 as well.)

I decided to install windows 7 on one of the new drives (after all it was newer and faster), I partition the harddrive to about 500 megs, formatted the partition using window 7 setup (booting up from the DVD), the OS installed, I then let Window 7 do the updates, was forced to reboot, I then get an error that it couldn't find a bootable drive on boot up.

So I reran windows setup tried recover to fix the drive, same error, so went to reinstall window 7 again, this time it told me it could not install the drive on the partion.

So, rebooted back with my original Win7 installation and all was fine with the drives as extra drives in my system.

Anyone have any ideas?

View 5 Replies View Related

Hitachi Hds721050cla662 500gb Not Detected

Jan 20, 2012

Almost all my files are in this hdd and it won't work anymore. just restatted my pc and suddenly it won't show up. it's my back up/storage hdd...

View 5 Replies View Related

No Picture Only Sound On Hitachi Plasma 50?

Aug 29, 2012

hitachi plasma has sound but no picture. 50PD

View 3 Replies View Related

How To Create A Bootable Iso Usb For Hitachi Feature Tool

Aug 18, 2012

I downloaded the iso image that is to be made in a bootable CD , but i want to burn it to a usb stick (i never got a working bootable CD in the past to work and i'd rather not waste 10+ cd's again).Either i get "disk error" when i boot from usb or just a pulsing.

View 6 Replies View Related

Hitachi Laptop Hard Drive Password

Jan 26, 2012

i have hiachi laptop hard drive when i turn on the computer so give password message.

View 1 Replies View Related

Hitachi Hard Drive Hds721010cla63 Driver?

Aug 4, 2012

I can't install Windows 7 (or Vista) on this hard drive. XP and XP 64bit install with no problems. When installing Windows 7 it won't reboot. It gets to the "Starting Windows" screen and hangs there.

View 3 Replies View Related

Driver For Hitachi Life Studio Desk Plus 2tb?

Sep 15, 2012

I have a hitachi life studio desk plus 2tb and i need drivers for windows 7

View 1 Replies View Related

Hitachi Deskstar 7k3000 Drive - Windows 7 Only Using 2tb Of Space

Jul 8, 2011

I just recently bought a new system and while installing Windows 7 Ultimate x64, I noticed that the hard drive was only using 2tb's of space. After some checking I found out the window's will only be able to use 2tb's unless I use the Hitachi's disk management tool to open the additional 1tb. Now the problem I am having is that the tool notes I need to convert the drive from MBR Disk to GPT Disk.

I was found several ways of doing this but none give me any information on how to do this if the drive itself is the primary boot drive for the PC. Unfortunately I don't have another hard drive or PC to throw the new one in just for the time being (I am assuming that this is one way to resolve this).Basically it doesn't let me convert the hard drive to GPT unless it is empty (again, I am assuming the OS needs to be gone as well).

View 1 Replies View Related

Use Hitachi Drive Fitness Test Software With X64 Processor?

Jul 11, 2011

I have a Hitachi HTS545050B9A300 500gb HDD and was wondering If I am able to use the Hitachi Drive Fitness Test software with my x64 processor? I know that it says it is only compatible with an x86 architecture,but what are my alternatives besides a CHKDSK?

View 1 Replies View Related

Have Hitachi External Hard Disk But Not Connect In Laptop?

Oct 9, 2012

I have hitachi external hard disk but not connect in my laptope

View 1 Replies View Related

External Drive Worked Once Only?

Oct 20, 2012

i have a toshoba satellite with windows 7 home version I have a couple of old 2.5 hard drives from an old IBM thinkpad that I want to get the pictures from. I bought a SATA/IDE USB cable and plugged it in after a while it loaded and i could see the drive in "my computer", and I could access all the pictures, which was great. (unfortunately I didn't copy across the pictures..). I then tried the second drive, that one hung during the loading process. however since then my laptop just doesn't see either of the drives when I plug them in. Just for clarity have only tried them one at a time and I they both power up.

View 4 Replies View Related

32 Bit IE Has Not Worked For A Long Time?

Dec 20, 2012

My 32 bit IE has not worked for a long time I have tried everything and finally tried turning off my add ons and it worked so I went back and tried turning them off one by one and counld not find the one that is causing the problem. Im not even sure what these add ons do im not very advanced in pcs I can just follow instructions.

View 1 Replies View Related

Debugging Simple .bat That Worked On XP?

Jun 1, 2011

I have a backup .bat that I have hobbled together from forums such as this. The original was made a few years ago. It worked flawlessly, until I brought it to windows 7. Very funny, now, it only works between 10am and midnight. This has been hell to figure out because sometimes it works and sometimes it doesn't. I know it has something to do with the context of the "set hour" or "if "%hour.." part, but I can't figure it out. Should be an easy fix for someone familiar with .bat programming. Here is the relevant part:

Code: set hour=%time:~0,2%
if "%hour:0,1%"==" "set hour=0%time:~1,1%
set folder=%date:~10,4%_%date:~4,2%_%date:~7,2%-%hour%.%time:~3,2%
set DateFolder=%date:~10,4%_%date:~4,2%_%date:7,2%

View 9 Replies View Related

USB Ports Worked In XP Not In Windows 7

May 25, 2011

I have built all of the PCs currently in use - one that my youngest has access to has an MSI Motherboard in it (sorry haven't got the mobo manual to hand at the moment.Purchased an upgrade from Windows XP Pro to Windows 7 as youngest in education got a discount on the upgrade. Windows XP has to be present at point of install - cannot be a direct install or installation upgrade from within XP. In XP all the USB ports work normally but in 7 the bottom 2 (USB2) are 'dead' in 7. The MSI forum begs to differ. And I know not to add any USB peripheral device before installing software. Processor is a 2.4 Ghz AMD Athlon 64 AM2 Processor and an AGP card (8x) that requires two power sources. Power supply is 450 W - is this too low? 1 Gb 400 MHz RAM, 170 Gb Hard Drive shared equally between Windows XP and 7.

View 9 Replies View Related

Running A Software Twice That Worked On XP Before

Jun 3, 2011

As the titel says I have a software (a messenger for textbased RPGs similar to Skype, so it is nothing illegal) I want to run twice.

Before I had Windows XP with the same software and it worked like a carm with "Run as user..." After getting a new computer which runs with Windows 7 Premium Home x64 I installed the exact same version of the software, it simply won't open another instance with the "Run as user..." command.

As it is the same software version there can't be any lock within the software to prevent multiple instances as it worked on XP before. So I assume maybe it is some setting in Windows 7 but I haven't found anything useful yet. go through using VM or anything like this just for a simple messenger

View 9 Replies View Related

CD-R Software Worked But When Ejected It Becomes Blank?

Nov 2, 2012

I have a lot of cd's which worked before this happened, now all of them are blank, it says on the system.Even cd-r dvd's are cd-rw.

View 7 Replies View Related

Task Scheduler Worked One Time Shutdown?

Jan 15, 2013

I have Windows 7 ultimate installed. I used the Task scheduler one time to do a Shutdown of it set at 10pm it worked fine one night now when i set it for a different day it does not work anymore. i have the right trigger, time and date etc set correctly WTH.

View 3 Replies View Related

External Harddrive Worked In 32 Bit Windows 7, Not 64 Bit After Uprade?

Dec 13, 2011

I'm new to this. I was working with Windows 7 32 bit and recently decided to take advantage of more RAM for recording music by upgrading to Windows 7 64 bit. However, after the upgrade installation my WD MyBook Studio II 2tb is no longer recognized in "My Computer" when I hook it through firewire OR USB (Yet all other devices work as they should) - So I've been to Disk Management and it shows up as a disk. However, there is still no letter assigned to it. When I right click on it, the only option is to delete volume. As you can see in this picture it shows up as disk 2 with three separate regions.

Now, when I hook it up to a MacBook running Leopard the WD MyBook Studio II works just fine and all of the files are accessible. I've also tried uninstalling the drivers, powering down and reconnecting, updating drivers. I've also switched my firewire controllers to (Legacy) in Device Manager. I still am not able to access my external drive within Windows 7 64 bit Home Premium - YET it worked great with 32 bit.

I can't remember if I disconnected the external drive from the computer when I upgraded Windows, but would that potentially have affected the install? How do I get access to my external drive if it won't show up in "My Computer" when it shows up perfectly fine on the MacBook running Leopard? Right now I'm using just less than half of the drive at around 800 GB and it's made up of two separate 1tb drives. I'm completely lost. Does anyone know a solution to my problem?Also: Windows lists my specific external drive as compatible with Windows 7 64 bit.

View 4 Replies View Related

Dual Monitors Worked W/Vista But Will Not With Windows 7

Sep 23, 2011

I had dual monitors working from Vista desktop, using a VGA/DVI from a single video card. Last week, the HDD failed, so I figured it was time to step up to Win7. Bought Win7 Home Premium, bought HDD and installed.... See dual copies on monitor screens during boot, but when the boot goes to switch over to the HDD, both screen go and remain blank... Hitting keys and moving mouse, I hear disk noise that leads me to believe the machine is processing my input, but I just can't see it. Confirmed by disconnecting one monitor. The machine boots fine w/single monitor hooked up, so it doesn't appear to be a "sour" install. Just odd that everything worked fine in Vista, but balks in Win7.

View 1 Replies View Related

Windows 7 Will Not Start, System Recovery Has Not Worked

Dec 23, 2012

Windows 7 will not start, System recovery has not worked

View 15 Replies View Related

Unable To Install Windows To Hitachi Hard Drive - Disk Read Error

Nov 11, 2012

Originally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.

View 2 Replies View Related

Dvb Card Doesn't Work After Worked With Com Port In Other Soft?

Jan 7, 2013

I have a USB DVB card that works good! 3 days ago I have working on virtual com ports in matlab soft! and after that when I connect dvb card to my laptop usb ports the dvb software doesn't detect dvb card! and shows this message: all capable dvb adapters are busyno free device has been found after that I try to reinstall matlab and dvb soft and dvb driver too, but it hasn't work yet

View 6 Replies View Related

Did Edit-registry Fix To Be Able To Manually Sort Files But Not Worked

Jan 13, 2013

I got a new laptop but it has windows 7. 1 of the extremely huge problems this operating system has is this absurd thing where you cant arrange your own files in the order that you want.Im not gna waste my time ranting on here as it wont make any difference, but it does astound me that microsoft would employ such thickos who were unable to create an OS that was capable of offering such a basic function! i followed the (this) registry-edit steps lastnight to enable free-positioning of my files (unawave. de/windows-7-tipps/disable-sorting-auto-arrange.html?lang=EN).I did it lastnight and it worked perfectly!I then turned my laptop off as it needed to install its daily updates, but when i restarted it i can no longer move my files around in my pictures/videos/or my music folders!Photo/video files in other folders can still be moved around freely, however as all my pictures and videos are saved by default into those 2 folders this causes me a huge problem!

View 1 Replies View Related

Asus Recovery - Intel Driver Not Signed (but Worked Before)

Mar 9, 2012

My harddrive went out and I put a new one in. It was a brand new drive and I loaded Windows 7 Home Premium 64bit from my laptop's recovery disk that came with the inital purchase. When I started to add the drivers 2 of them came up as unable to verify the signatures. Most importantly the driver for my Wifi adapter, which is an Intel Wifi Link 1000 BGN says this. Windows refuses to run it in that state. So I have no internet and it says that the adapter is not installed or is disabled. When I go into the Device Manager the adapter is there with a yellow "!" and has an error code 52 (for unsigned driver). It shows installed and enabled though I installed the driver from the intial driver disc and it says unsigned, I was able to get the latest driver from Intel's website and that too says it can't verify the digital signature.When I boot into the F8 screen and disable driver enforcement I am able to get online.I'm not sure if this is related or not, but regardless of how I boot, Windows updater and troubleshooters do not work.

View 3 Replies View Related

Installed New Sound Card Which Worked But Now Its Not Visible-in Device

Sep 24, 2011

I have had high definition audio device in my system which never worked despite much effort. Finally I bought a new sound card and installed it's software from it's CD. The sound function started working but now I am again seeing the red cross on volume icon which says no audio output device is installed. I went to device manager but I can't see the new sound card there so that I can reinstall it's driver.

View 2 Replies View Related

Removing The Entry In The Registry And Uninstalling The Driver Worked = Perfectly?

Mar 30, 2012

Removing the entry in the registry and uninstalling the driver worked = perfectly.

View 1 Replies View Related

Camera Window Does Not Detect Camera , Windows 7 Is On Computer

Nov 4, 2012

Camera window does not detect camera.

View 2 Replies View Related

Error Code 0x490. Read Every Forum On The Site An Nothings Worked?

Oct 6, 2012

got a dell 531s aint sure for the specs right off hand, BUT i got this error code after putting my hard drive into a different tower an I can NOT get it to go away.i've done everything possible that I'd found online an everything. I'm ready to just part it out to my sister & brother in laws but my fiance needs a computer

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved