Resetting Security Setting To Default Via Defltbase.inf
Dec 7, 2009
I'm a recovering victim of the "C: is not accessible" bug.
I recently found this which uses cmd to edit security settings:
Sample command to reset security settings:-
The steps below do not apply to Windows XP Home Edition, or Windows Vista Home Basic and Home Premium editions. To restore security setting for Home editions, either use the Microsoft Fix, System Restore or a backup.Note After security settings are applied, you cannot undo the changes without restoring from a backup.
If you are uncertain about how to restore your security settings to the default settings, you must make a complete backup that includes the System State (the registry files). Items that are reset include NTFS file system files and folders, the registry, policies, services, permissions , and group membership.
To restore your operating system to the original installation default security settings, follow these steps:
Click Start, click Run, type cmd, and then press ENTER.
In Windows XP, type the following command, and then press ENTER:secedit /configure /cfg %windir%
epairsecsetup.inf /db secsetup.sdb /verbose.
In Windows Vista, type the following command, and then press ENTER:secedit /configure /cfg %windir%infdefltbase.inf /db defltbase.sdb /verbose.
You receive a "Task is completed" message and a warning message that something could not be done. You can safely ignore this message. For more information about this message, see the %windir%SecurityLogsScesrv.log file.
Next steps After you run this Microsoft Fix it (or complete these manual steps), standard user accounts may no longer appear on the log on screen when you start your computer or try to switch users. This occurs because standard user accounts are removed from the Users group when you reset Windows security settings. To add the affected users accounts back to the Users group, follow these steps:
1. Click Start, and then All Programs. Or click Programs.
2. Click Accessories, and then click Command Prompt (Windows XP). Or right-click Command Prompt, and then click Run As Administrator (Windows Vista).
3. In the Command Prompt window, type net users and then press ENTER. A list of user accounts is displayed.
4. For each account name listed in the Command Prompt that is missing from the log on or switch user screen, type the following command and then press ENTER:
net local group users account name /add
5. Now go to the "Did this fix the problem?" section.
More information In Windows Vista, the Defltbase.inf file is a Security configuration template for the default security. You can view the settings for this file in the following location: %windir%infdefltbase.inf
View 2 Replies
ADVERTISEMENT
Dec 11, 2011
How do I reset My Pictures to the default setting?
Since installing the latest update for Photoshop CS5 all of my pictures have the CS5 icon on them and when I click to open the picture it opens in Photoshop.
View 2 Replies
View Related
Apr 13, 2011
I have made sure that the power settings in control panel have been set to "never" under advanced settings. About 4 months ago, windows decided to set my monitor shut off time to 20 minutes. The first time it happened, I figured it was a one-off thing, and set the monitor off setting back to "never". Fast forward 4 months, and I have to turn the setting to "never" every time I start my computer. I've even made custom power profiles, and every time I restart, the monitor off setting keeps going back to 20 minutes.
View 7 Replies
View Related
Jun 24, 2012
I've messed up the security settings on one of my drives such that I can't encrypt any file or folder on that drive.
I get a message saying "you will need to provide administrator permission". This is even though I am the administrator and I have ownership and control of the drive and the folders and files on it. Weird, right?
Is there any way to reset the permission on a drive short of formatting it?
View 7 Replies
View Related
Sep 29, 2012
I allowed the Norton Internet Security folks to have remote access to my netbook and now value of the following keys have been locked in these resets.
[code]...
That appears to be alternate or maybe hotkey settings? Anyway, Norton declines to fix their mess, so I have to muddle through. How to go back to default key values on the keyboard? I'm using Windows 7 on that machine.
View 2 Replies
View Related
Aug 6, 2012
I installed a program the other day that messed with my Windows Explorer. Now no folder will remember it's View options (Large Icons, List, Details), they all reset to their default.
As you can see it's nothing to do with Libraries. Neither the 'Shell Fix' nor editing the registry at
HKEY_CURRENT_USERSoftwareClassesLocal SettingsSoftwareMicrosoftWindowsShellBagsAllFoldersShell
has fixed it.
View 3 Replies
View Related
Apr 17, 2012
I am sure this has been answered in the past butI cannot find any links when I search!
I left my pc to boot up and it started into a check disc mode and all I get is the above message. I cannot reboot in safemode to restore, what can I do?
View 2 Replies
View Related
Nov 11, 2012
windows 7 want open security setting
View 1 Replies
View Related
Jan 7, 2012
I have just installed a Netgear WN3000RP Wireless range extender and Netgear N300 Wireless USB Adaptor. The USB Adaptor shows as having WPA2-PSK Security but the Extender only shows as having WPA-PSK Security. This is probably something I did when installing. Is there any way to alter the security setting on the extender or do I need to reinstall it.
View 2 Replies
View Related
Apr 20, 2012
In the public folder I have a Pictures Sub folder with 100's of locked files. How to un lock the files for everyone?Example of the path C:UsersPublicPublic PicturesCamera*.jpgWant to change all files, folder is open to everyone.
View 1 Replies
View Related
Apr 5, 2010
If I click on hyperlink (Windows 7) it says I need to have the administrator (me) grant permission. I have not been able to find a point at which I can do that. Where can I change that setting?
View 14 Replies
View Related
May 16, 2011
I am getting Error msg for win 7 using IE 8 - security setting do not allow you to dnload etc.I have changed internet options but same result.
View 1 Replies
View Related
Jan 5, 2012
i was trying to set up my home group so i got the password and put it into my other laptop it keeps saying password incorect.i've got norton internet security
View 1 Replies
View Related
Mar 10, 2011
i have a hp mini which original came with xp professional, but it got corrupted. i tried doing a repair using my xp cd, but that did not work just keep getting an error. so to save time i when ahead and did a new installation windows 7 ultimate, and its working fine. the only problem is that the old Os (xp professional) is still showing up in the windows boot manager menu and is only defaulting to the xp.in fact three choices are showing up in the windows boot manager, which are 1)Earlier Version of Windows 2)Windows 7 3)Microsoft Windows Xp Professional Setup..what can i do so that only windows 7 is showing up in the boot manager? the other two are not working.
View 1 Replies
View Related
Feb 21, 2011
I am using Windows 7 Professional on an HP Envy laptop.I hate windows live mail.I do have Office 2010 installed and only use the contacts and calendar programs.I do not use Outlook.I have copied Vistas Winmail.exe program to Win 7 and reinstalled all my mail and settings from before with no problem. It works and I am reasonably happy. However, I cannot set it to default for .eml or mailto: links. I have been to the Control Panel and Default Programs.looked in "Set your default programs" and Windows Mail is not an option. It does not appear there at all.been to "Set program access and computer defaults" and set it as default under Custom.I tried going to the "Associate a file type or protocol with a program", found the .eml and mailto links and tried to change the program associated to Winmail.exe by browsing to the file and selecting it. But the file is grayed out and cannot be accepted as a change. The WinMail.exe file is also grayed out when you browse to it in Explorer, as it is a hidden file.
View 3 Replies
View Related
Dec 12, 2009
I have installed Xemacs for windows and I'm having a problem associating it as the default program for .txt files. I know the standard process, but that standard process doesn't work. I have "Windows 7 Home Premium installed on a 32 bit system. I go thru the standard process via Default Progams/Associate a file type/ process and then browse to the Xemacs application. When I select it, nothing happens. When I check the association, it's shown as "Unknown application". Note: I have a 64bit system that handles the assocation just fine.
Also, on the original system, the choices for default programs is very limited. It seems that programs I have installed some how are not being populated in the eligible "default programs" list?
Any ideas? Is there a brute force way to add programs to the Windows 7 default programs list?
View 3 Replies
View Related
Jul 21, 2010
I am new to Windows 7 and all my attachments from emails download to the defaulted "Download" folder. How do I change this so that I can choose where to save my files?
View 9 Replies
View Related
Jun 15, 2011
How do you set the default zoom factor in IE 9?
I know about the option to automatically reset it whenever a new tab opens (found in the advanced tab in IE options), and I know that this is based off of what option is set in the "Ease of Access" control panel. The thing is, is that this is on a laptop, so I like all my icons and text outside of IE to be at 125%, but flash is messed up in IE if it isn't set to 100%. Also, every once in a while I discover that I have accidentally changed my zoom factor by hitting control+scroll (just a guess this is how it changes), and would like to avoid this.
View 3 Replies
View Related
Dec 8, 2011
sey up my default mail client on windows 7 laptop.
View 1 Replies
View Related
Aug 28, 2011
Win 7 with IE9 I always save web pages as: Web Archive, sinfgle file Is it possible to make this the default setting?
View 2 Replies
View Related
Jul 26, 2011
I want to know if this is possible, I want by default have users data safe on to a different drive, so basically when I create a user, their Music, pictures, goto U<USERNAME> but their appdata folders and stuff stay on C drive, like this they will be able to login if something happens to external drive, also like this data is backed up! I use WIin7 Ultimate
View 5 Replies
View Related
Apr 3, 2011
i tryed sending a message via email and it said i had to set up my default mail client up and how do i do tha?
View 2 Replies
View Related
Apr 6, 2011
Installing Mail client on my pc.
View 2 Replies
View Related
Apr 14, 2011
Could not perform this operation because the default mail client is not properly installed. Comes up when submitting a resume request. How do I fix this issue
View 1 Replies
View Related
Aug 3, 2011
I have put several e-mail addresses into my Windows Live E-mail folder. Some are Comcast addresses, some Gmail. I have set one of my Gmail addresses as my default e-mail address. This default setting doesn't hold. When I open my e-mail folder and try to send a new email, the default setting no longer shows. This requires that I set my outgoing e-mail address manually, which I should not need to do once I set my default address.
View 1 Replies
View Related
Nov 9, 2012
I work for a large corp which provides a standard image. I install this image, and wish to make changes particular to our area (About 8 offices)
Then burn the image for new workstations. I have been doing the desktop customization, show menus, desktop icon size, etc. I then go to C:Users and copy that customized user and rename it to default.
This works but has side effects, such as a new users default location for documents is always the original users. Plus some of our software fails. So I am now wanting to change the registry to do the same thing.
My question: Is there a way to edit the "Default User" in the registry so that it would be used for any new user? That way I could set the default registry and all new users would get those settings.
View 3 Replies
View Related
Nov 15, 2011
I found "Outlook 2010 setting default save location" and that worked very well!
I am looking for "Outlook 2010 setting default save format" so that when I save a mail, it does not default to .msg but rather to HTML.
View 5 Replies
View Related
Apr 16, 2011
I have a laptop that i often connect to a tv screen. When i am just using the laptop screen i keep the dpi value to its normal default setting, but inceease it when i connect it to the tv so things are easier to read. When i disconnect from the tv and go back to the laptop screen everything is too big bevause of the increased dpi,i set it back to its default settings.However when i do this everything is rediculously small and sometimes impossible to read. Even setting a larger dpi from this point creates text that is too small. I cant go higher from this point because it also makes my windows too big. Does anyone know how i can get back my normal text size with a default setting of 100% dpi?
View 1 Replies
View Related
Apr 21, 2011
How do I set Windows 7's Recycle Bin to automatically have a default disk space allocation for deleted files from external hard drives and TrueCrypt-mounted volumes?I remember in Windows XP, I can set a percentage of total disk space that will automatically used as storage capacity for deleted files by the Recycle Bin, and this will be to all external HDs or TC-mounted volumes.Windows 7 defaults to the 'Don't move files to the Recycle Bin. Remove files immediately when deleted' setting for newly mounted external HDs and TC mounted volumes. Since I am expecting deleted files to go to the Recycle Bin, sometimes this causes an 'Oops' when I delete files in external hard drives or TC mounted volumes, as Windows does not move deleted files to the Recycle Bin, but just deletes the files permanently.
View 1 Replies
View Related
Apr 3, 2011
I'm getting pretty good at reinstalling Windows 7 (Clean) - However I do have a question: What is the best way to set myself up as the Administrator so I don't constantly have to work around those pesky "You need administrator privileges to do xxx". I would think that even with setting my default user account as an Administrator, there would be a way to really be an Administrator.
View 3 Replies
View Related
Jul 12, 2010
I have changed the permissions for the access of files and folders in the security tab of given in the properties of the Hard Disk Partition.Now I other users of the same computer cannot access the drive or make changes there. I tried hard to solve the problem but the output is "Access Denied". Any way to make this permissions to its default(or The normal state which it was). My OS is Windows 7 Ultimate x64
View 8 Replies
View Related