I have a laptop that is about a year old. Recently, my system rebooted and I was no longer able to view my Programs, files on the Hard drive or any other document. Here is the twist. I am still able to log into windows, use the Internet Explorere. If I happen to know the location of the file I can pull it up. It seems like i have no viewable rights to my C: drive at all. but can still work on files and programs.
View 1 Repliesi've been having some really weird freezes, sometimes its just the windows but multimedia keyboard keys / mouse still work, other times it completely freezes (cant even move the mouse.).Usually if i wait a little bit the computer goes back to normal by itself, other times i get BSOD.Im pretty sure its hardware related because i've tried formatting and got a bsod right after installing windows, i suspect the hard drive because when the computer freezes all HDD activity stops, when the computer manages to recover the hard drive activity comes back exactly at the same time the system unfreezes, sometimes if i run chkdsk there are lots and lots of errors, windows fixes them but they come back sooner or later, also, sometimes the computer doesn't detect the hard drive after a BSOD, turning the computer off and then on always "fixes" that tho.
The only reason im not 100% sure its the HDD its because all HDD utilities i've tried (incluiding western digital diagnostics software) say the disk is fine, can SMART be wrong I've also ran memtest and no errors (just one pass tho)Things seem to have gotten worse when i changed the graphic card, however i remember getting these freezes with the old one, just not as serious, prolly just a coincidence.I remember getting 3 kinds of BSOD errors: driver_power_state_failure, pagefault_in_nonpaged_area and kernel_data_inpage_error.A week ago i turned my pc on and windows was broken, startup repair thing would show up and try to repair but failed no matter how many times i tried, this never happened to me before so it must be related.
I just installed windows 7 on a home built desktop. Everything seems to be running fine except my 3rd hard drive won't show up. In device manager it shows all 3 hard drives, but in My Computer it only shows 2.
The hard drive that isn't showing up in My Computer (but showing up in Device Manager), is a Seagate Barracuda 7200.12 1 TB.
The hard drives that are showing up are both Seagate Barracuda 7200.11 but one is a 500 GB the other is a 750 GB.
I had Windows XP, then installed Windows 7 32bit Ultimate on IDE hard drive.
HOW CAN I FORMAT THE IDE HARD DRIVE SO AS TO DO A CLEAN INSTALL?
When putting CD in and pressing Intall. I wanted to Format my 40Gig IDE hard drive (that I use for windows intallation only). So as to start CLEAN install.
The CD recognised my hard drives. 250Gig SATA and 40Gig IDE....however would not let me format either or change in any way.....something about load driver?? VIA 6140 something.
So instead I thought to boot the disk and try that way. It didnt recognise the IDE hard drive at all. anyway I chose to do it the first way once I found that driver I mentioned.
I installed windows on woindows, then deleted the windows.old file afterwords.
I set the hard drive to stop spinning after 4 hours of idle activity but it doesn't ever go to sleep. If I set the time interval to < 1 hour like 45 min then it will go to sleep.
I'm not talking about the computer going to sleep/hibernating, I mean the spinning of the hard drive.
I had an internet problem with windows 7 ultimate 64bit, so i decided to format it. I had one windows drive (SAMSUNG 250GB) and one storage drive (HITACHI 1TB) which has 900GB of important data on it. I chose custom installation onto my old windows drive (samsung) and it installed with no problems. I didn't touch my other drive. now, i can't see my 1tb storage drive in computers or in drive manager, but i can still see it in device manager! What should i do?? i really don't want to format it, but if the data is gone then i will have to.
View 5 Replies View RelatedI have a Seagate External Hard drive, Desk Goflex 3 TB.I'm using it for sevral mounth in windows 7 and it's working fine.Now, I bought a new latop using windows 7 as well, and it's not recognizing my hard drive.The hard drive doesn't appear in the Disk Management at all.The computer does recognize other USB devices (disk-on-keys, mouse).
View 1 Replies View RelatedInstall everything, the bios detect the hard drive (it's a new hard drive, never been use) but when installing the Windows 7 64, the hard drive list is empty.
Here my spec
Phenom II 940BE | Gigabyte 790X-UD4P | Seagate Barracuda 7200.12 500GB | XFX HD4770 512MB | OCZ StealthXStream 600W | NZXT Tempest
Here's my hard drive: Seagate Constellation ES ST3500514NS
I haven't been able to get Windows 7 installation to detect this drive for about two months now. I'm running on a Gigabyte GA-880GA-UD3H mobo, revision 2.1.
I recently found a list of drivers for my motherboard on Gigabyte. I also found some downloads for my hard drive.
Oh, and I can use this drive if I'm running Windows 7 on a different hard drive, but I just can't install Windows 7 on it.
I bought a new hard drive but toshiba said it isn't formatted correctly and now my drivers don't load
View 1 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI recently noticed an issue when trying to connect to external hard drives. Initially noted that it wasn't showing in 'my computer' and so assumed I had driver issues and sought to update them from Dell's site. After doing so there was still no change, but noted that It was appearing in 'device manager'.I even tried updating the USB hubs from the Device Manager, and it states that they are all up-to-date with the correct drivers. Both external hard drives that i have tried has worked on other PC's so i assume that mine is the issue.
View 1 Replies View RelatedI have a WD My Book 110 External Hard Drive and when I plug it in and go to my computer to access the files on it the drive doesn't show, but if I go to the start menu and type b: in the search box it shows the files and the drive also shows in Disk Management, so why isn't it showing in My Computer and how can I get it to show?
View 9 Replies View RelatedMy mother asked me to fix her computer, his window XP is badly corrupted, so I tried to install Window 7 on her computer. However, the hard drive didn't show on the screen. I found it quite odd because BIOS detected it as IDE driver, and it's a SATA driver. I tried to install with old Window XP installation CD. Same thing, doesn't show on the window XP installation screen either.
I tried to hook hard drive on other computer, and was testing with Window 7 XD and see if it was working, and it did. It shown on the disk screen. My guess that it's probably the BIOS that occurred, or perhaps other things. I have one hard drive, nothing more.
My only Windows DVD was an upgrade disk I used before on the same computer a few months before. I used the command prompt on the DVD to create a NTFS partition for the OS to load onto. After that everything installed and worked fine until I tried to activate use the upgrade key, it says that it can only be for upgrading and not clean installations. I was under the impression that since I already used the key to upgrade on the computer, I would be able to use it again. Will I need to buy a new install disk or will I be able to activate the OS another way? If I do need to buy a new install disk, would it be possible for me to simply find a X16-96072 Windows 7 Home Premium iso and use the activation code that my computer came with to provide the upgrade code with?
View 9 Replies View RelatedSo my trusty old 40 GB Maxtor HDD finally died, and I'm trying to install Windows 7 on a 250 GB Western Digital Caviar SE 16 (SATA II). Windows will boot off of the DVD, load the setup, ask me if I want to perform an install or a repair, and then it asks if I want to upgrade or do a "custom" setup. I choose custom since it's a clean drive, but then it shows me a blank list of drives with the option to load a driver. My motherboard is a Gigabyte GA-G41M-ES2H, so I went to Gigabyte's website and downloaded the drivers and put them on a USB thumb drive. I spent hours trying to load different drivers to no avail. I tried the CD that came with the motherboard; no dice. I tried 32 and 64 bit installations; neither worked.
But you know what did work? My 180-day trial copy of Windows Server 2003. It detected that hard drive like Western Digital made it just for 2003.
I built a new computer. Rather expensive, but it should perform well. -Anyway-, I bought a brand new hard drive with the expectation of installing windows 7 on it and then working from there. The hard drive is recognized in the BIOS, the CMOS, and anything at all I've checked, but when I put the windows 7 64 bit disk in and try to do a custom install, seeing as I have nothing on the disk from which to upgrade, my hard drive does not show up in the section in which 7 asks where I want to install.
Motherboard is GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard, hard drive is Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive.
The hard drive is plugged into the top SATA port (It has like, 10).
What can I do?
I have my WD75 Caviar Black 750G from my old computer it has all my files on it and it will not let me plug it in and look through it probably because the original computer was Win XP. Is there anyway to get the information off of the harddrive?
View 2 Replies View RelatedI recently attempted to add a hard drive to my Lenovo W520 laptop using a CD/DVD caddy accessory designed to hold a SATA hard drive.Windows recognized the new device and according to its messages, automatically installed the required device drivers. However, when I go into Windows Explorer, the new drive is nowhere to be found.Now, I know (or at least assume) this new drive probably needs to be formatted, but shouldn't it show up within Windows Explorer even in a pre-formatted state?
View 4 Replies View RelatedI have a Seagate GoFlex Desk 3TB external hard drive. I got it about.. 6 months ago and I've never had a problem with it up until last week. I plugged it in and it started making a normal fan sound like is usually does, then after a few seconds it stopped which made it seem like it was shut off.
View 4 Replies View RelatedI`ve got a serious problem with my vaio. i was surfing the net that i faced a BAD SECTOR ERROR on system 32. As I closed the ERROR,the system restarted. When I select the windows 7 to boot, the windows logo page come and restart again and again.Even when i decided to install a new version or repair it,the installation found no drive to install on.\
View 1 Replies View Relatedmy laptop acer aspire doesnt recognize my external hard drive in windows7. I will be great ful to them. it doesn't show any external hard drive but it shows pen drive and mobile usb cable but not external hard disk
View 1 Replies View RelatedI have a 8 GB Transcend flash drive. I works properly on other systems (at least one system), but when I plug it in my Laptop, it is not even detected. Other USB devices work perfectly with my laptop, the only problem is with my Flash drive AND my laptop. I have tried to re install USB Hubs etc. of the laptop, but it did not help.
View 6 Replies View RelatedHow can the contents of a hard drive from an old computer be transferred to new computer when hard drive is out of the old computer?
View 3 Replies View RelatedSo What i am saying is whenever i boot up my computer there is a black with white text screen that says something about an unconfigured hard drive that is in my computer. But then again whenever i am on my desktop doing whatever i can use it perfectly fine. Also it does not show up in the bios. it just has my boot up drive and my optical drive.
View 1 Replies View Relatedcan i add c drive from an HP windows xp to a asus windows 7?
View 1 Replies View Related*I have a new windows 7 (professional 64) machine.
*I removed my two hard drives from my old computer (windows xp).
*I installed them in my new computer as drive F and G
*I want to be able to use my programs and access all my data on my old drives, in my new computer
*I want to be able to access my old outlook data, including email from my old drives
*I see a bunch of folders in my F and G drives, but can't seem to use any of the program files and I don't even see "my documents" from my old computer or any outlook files...maybe I am lookign in wrong place.
How to use 2 hard drive in one computer
View 4 Replies View RelatedMy computer is running realllllly slow, and I'm not sure why.There's a lot of extra space on the computer, and Hardly anything running in the back ground. I just put a new hard drive in the computer, as it has done this previously, It slowed to a point where it would freeze and no longer work, until one day I turned it on, went to log in and it automatically restarted, so I discovered that the hard drive had crashed, I put a new one in it and it was fine, until about 2 weeks ago, when it started slowing down majorly.
View 6 Replies View RelatedI'm trying to get my Computer to sleep but it won't because of the Western Digital 1TB external hard drive that is connected to my network. The backup program is causing this problem, if I turn it off then it will sleep. I would like to keep it turned on because it will save any changes that are made to my folders and files. I would use the back program that comes with Windows 7, but that doesn't work. I get "Access is denied" Error code: 0x80070005. I think the problem may be from being connected to a network.
View 5 Replies View RelatedI'm fully formatting a second hard drive in my computer and it's a 3tb drive so it's going to take a while. I was wondering if I could watch videos I have on my other drive or if that would cause the process to run less efficiently or even skip sectors it was supposed to check.
View 9 Replies View Related