It's HP M9652Uk with a none original drive. Silicon Power 2.5" SSD 60gb What drivers do I need and how do I instal them? Drive detected in bios but not during setup, also in ACHi mode
View 5 RepliesSo I tried posting my question on Microsoft Answers, to no avail. I kept getting an error message when clicking the submit button...don't know why though as they provided me with no details as to what could be causing the error.(In Order of most recent restore points) This is the list that I encountered after selecting Choose different restore point in the Restore system files and settings windows. [code] Final, least recent, or 6th restore point from the top called 4/2/2011 3:23:17 PM Windows Update affected programs:
--Every affected program and/or driver is the same as those listed in the 'Programs and drivers that will be deleted' list for the 5th restore point from the top.
--The only program not listed in affected program list in the 5th restore point form the top is the driver Brother (Printer) 07/08/2009 01.08.00.00, which I manually installed myself also.
--The 'Program and drivers that might be restored' list for the 6th restore point form the top has the same files, programs, drivers, or windows update, as the 'Programs and drivers that might be restored' list for the 5th restore point form the top.
As I asked earlier, I wanted help making a decision on what restore point I should use. Also, I wanted to know what is the best method and/or procedure when using system restore to set Window's setting back to an earlier restore point based on the details I gave up. How should I perform it or what precautions should I take, so that I encounter very little to no problems whatsoever?
Using a site called canyourunit I tested whether or not my laptop would be able to run a game, it said that I couldn't but the only requirement I didn't meet was my graphics card. So I'm wondering whether it would still run, but just poorer graphics? heres the details
CPU
Minimum: 2.4 Ghz Intel Pentium 4 or equivalent processor
You Have: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz
CPU Speed
Minimum: 2.4 GHz
You Have: 2.1 GHz
RAM
Minimum: 1GB System RAM (XP)/ 2GB System RAM (Vista)
You Have: 4.0 GB
OS
Minimum: Windows XP/Vista
You Have: Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit
Video Card
Minimum: Direct X 9.0c compliant video card with 256MB RAM (NVIDIA 6800 or better/ATI X850 or better)
You Have: Intel(R) HD Graphics Family
Sound Card
Minimum: Yes
You Have: Realtek High Definition Audio
SO i have just built my first custom PC and I know it is all installed correctly, except possibly my hard drive. So I get to the window where I am supposed to select the drive where windows 7 will be installed. No drives are detected... so this means my hard drive isnt being recognized... I just got th 6822148837 and my case is weird, im not sure if i installed it all the way. My case is the Thermaltake Level 10 GT and it has hard drive slots and some kind of connector in the slot so that it plugs in automatically. I think it may not be connected fully, like I might need to attach a cord too.
View 13 Replies View Relateddriver corrupted on my printer windows 7
View 1 Replies View RelatedSo im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
View 6 Replies View RelatedWhen I open the PC, my hardrive and DVD rom was detected in bios but when the operating system started it shows the windows logo then after a second it shows a message that "the driver not found. Im confuse because i have only one hardrive which is the win7 installed on it. How can possibly that the PC did not find this driver but it shows the logo of win7?
View 1 Replies View Relatedcurrent printer: HP office jet 6500AI have had the same problem twice on 2 different windows operating systems with 2 different HP printers?Both time were for my parents. One with was with XP the other Windows7. They try to connect a HP printer with USB hoping it will get autodetected and windows will have the driver, it doesnt, they call me. I download what HP calls a driver but its a huge files (I think one was 30mb and the current one even more). I got around the first problem by installing the old printer to the XP through their router instead of USB but now they do not have a router. I think the printer is about a year old, the PC is new. So I googled the HP office jet 6500A and tried the two suggestions I found (right click, properties, run in vista mode and the other was a new usb cable....) but neither worked.
View 2 Replies View RelatedI have tried the driver from the official Broadcom website but it doesn't install, just says that bluetooth cant be detected. Looking for link somewhere for 64 bit version but where I can find the correct driver?
View 1 Replies View RelatedAfter a clean install of Windows I noticed that when I right click My Computer and select properties, there is no manufacturer information as well as the logo. Under System in this window the first on the list is the system rating. I tried going through the registry and in OEMInformation there is nothing there. Strange
I have an Alienware M17X Laptop.
I bought USRobotics. wireless USB adapter but have problem with driver. I installed driver software but still not detect from system.
View 2 Replies View Relatedalready posted about this issue in the Gigabyte section of the forums. Thought I'd post here for some more feedback, since the issue overlaps (admins please feel free to remove this thread if you think it's redundant).
Building my first computer, and I managed to get it running. I got the Windows 7 Home Premium 64-bit ISO off Digital River and made a bootable USB flash drive. Computer powered up, I set it to boot off the USB drive, and install process started. However, when it prompted me to choose which drive to install Windows to, my hard drive did not show up.
I rebooted, set the hard drive to AHCI in the BIOS (native IDE by default), and tried to install the drivers from the Gigabyte website off a flash drive, and still nothing. I also updated the BIOS and tried again in both IDE and AHCI, but still didn't work. I ordered a new hard drive and will try again later, but I'm doubting it's the hard drive (no signs of mechanical failure).
Dvd driver not detected?
View 4 Replies View RelatedI am not sure if I can still fix this but I am trying not to lost hope here. This started when I upgrade my professional XP to windows7 Ultimate. I was able to use it for at least 3 months with no issue but then my computer crashed. I decided not to use windows7 anymore and then installed back my XP professional but even I have tried to uninstall and reinstall the XP os, my computer tends to use the generic driver of the video card. It will not detect now my monitor driver as well. I still have all th cd drivers but my computer always tells me it can't locate the driver. Should I replace or buy a new video card or is it my monitor driver that is damaged?
View 1 Replies View Relatedi upgraded my computer from xp pro and i lost my internet driver
View 1 Replies View Relatedmy os install but hdd not boot may be drive disk controller or driver r missing how to solve problem toshiba laptop
View 1 Replies View RelatedWindows 7 Home Premium 64bit Rebuilt my PC with a Gigabyte Z68XP-UD4 board and i5 2500k CPU. Everything installed and ran perfectly. Zero hardware or software issues. I've been running two GTX 465's in SLI configuration. They ran fine right after I first installed their drivers. SLI worked perfectly. Everything was going well. I was benchmarking Crysis, playing Skyrim, all that good stuff. Then, I booted my PC this morning, and Windows was automatically updating drivers. I checked which ones they were, and among them were PCI bridge, PCI to PCI connector, etc. Since the update, I no longer have SLI. In fact, my second GTX 465 doesn't even show up in the Device Manager. In the Nvidia control panel, there is no option for SLI, it just show "Set PhysX Configuration."
View 1 Replies View RelatedJust curious, Why ?? A video driver is software. I get a yellow exclimation point in the Windows Performace tab saying I need to run WEI again.
View 5 Replies View RelatedRecently I reformatted my HD and clean install win 7 ultimate 32 bit on my computer, bcuz of some problems when booting up, took like forever to boot or 2 to 3 restarts..At first BIOS cant detect my HD so I taught its a hardware issue I did like changing the sata cable also took it to a technician TWICE! maybe the sata port was broken they check all the connection, the last one did fix it but im still having difficulty booting up..He said one last option reformat, so i did reformat it successfully from win xp, now it boots up just fine its running good no problem for like a week yeah just 1 week!. Now my pc has new problem or is it?? Whenever I used it 2 to 3 hours my pc hangs so much even just opening event viewer would take me 5 to 10 mins and 2 errors always flood event viewer the first time i saw it disk error reach 5231 and nvistor32 reach 5366 errors, right now as I am writing this, Disk error reach a waaping 23,145 total. I think this is a serious problem that needs some fixing.
View 6 Replies View RelatedI started having some severe system hang - checked event viewer and found "The driver detected a controller error on DeviceHarddisk0DR0" many times over. I have an EVGA 680i SLI (122-CK-NF68) - updated chipset/storage drivers - no fix. I opted to reload Windows. Previously I had two stand-alone HDDs - I setup a Raid 0 and cleared the MBR before starting the new install."Expanding Windows Files" seemed to take much longer than usual and during the final phase of setup I got "Windows could not configure one or more system components". I repartitioned and formatted and tried again - this time after the initial reboot just as its attempting to load Windows to finish installation (before the point I got the above error) there was an error (too fast to see) and the system reboot itself and continued this cycle till I shut it off. I've had this machine for about 4 years and reload Windows about every 6-8 months. The above two errors back to back seemed like more than coincidence.
View 2 Replies View RelatedRecently built a new studio (recording) rig...with the following parts:
CPU: Intel Core�i7 3770K Motherboard: ASUS P8Z77-V Graphics: PNY Quadro FX380 Network: Intel 82579 Gigabit Ethernet Audio: RME HDSPe Multiface II Memory: 16 GB Kingston HyperX Genesis DDR3-1600MHz w/ Intel XMP Optical Drive: Asus DRW-24B1ST 24x DVD-RW Drive HD1: Crucial M4 2.5in SATA III Solid State Drive, 128GB HD2: Seagate 500GB Barracuda 7200.12 HD3: Seagate 1TB Barracuda 7200.12 Case: Coolermaster CM 690 II Advanced PSU: Corsair HX 650 Professional Series OS: Windows 7 Professional 64 Bit SP1 Yesterday (and then again today) I used the DVD drive (basically for it's firs real usage) to rip a few CDs. I ripped a couple with no issues...but then suddenly - after about the third or 4th rip - I would merely reach down, press the Eject button on the drive and the machine would instantly shutdown. No blue screen, no message, no nothing.
At first I thought it was static or something - just reaching over to the machine and pressing the button Event viewer says nothing. However I did see one obscure message back on Oct 7th that stated this:"The driver detected a controller error on DeviceIdeIdePort0"Gotta think that's this DVD drive port. But no other messages at all since then.Anyone got ANY ideas as to what the heck is going on? It's a SATA drive - maybe a cable? Maybe the drive controller is actually FUBAR-ed? Maybe the power supply? Motherboard (I hope not)
I have recently finished building my computer and brought a copy of windows 7 (home premium) 64bit to go with it. But when I try to install I never get past "collecting information" where I am being asked to "Select A Driver To Install" as a driver for my "DVD Device" is missing (apparently). I assumed that the driver I needed would be on my motherboard driver disk. I clicked the disk and told it to "rescan" and it only said "There's no device drivers were found. Make sure that the installation media contains the correct drivers". When I navigate directly to the sata,raid & ide drivers sometimes I get a: nVidia nForce Serial ATA Controller on the screen but when I click on that it says the same thing after about 10 seconds or tells me it cannot install and I need to get a new driver from my distributor (I have tried the drivers of the Asus website but the same result). What do I do?
PC:
AMD Phemon X4 965 @ 3.4ghz (black edition)
2gb RAM
250gb HD (sata)
DVD-ROM (IDE)
Note: it's brand new and doesn't have an existing windows installation.
Automatic install sound driver windows 7 driver in computer?
View 1 Replies View Relatedi have two OS install in my PC. one is win xp in c: drive and another is win 7 ultimate 64 bit OS in e: drive.my modem is teracom. from my windows xp i could successfully set up broadband connection and could connect internet but when i try to establish internet connection from win 7 then i am getting error like modem not recognize.
View 4 Replies View Relatedi just recentely buy Iphone 4 and when i try to connect it to the pc it being detect by Itunes but not being dectec by the pc itself (means that if i go to "Computer" i can't see the Iphone icon there being detcted as camera... )
the pc do detect the "Apple Iphone something" (sorry not remeber the name) but not show me the icon so i can use it....
and when i disconnect the Iphone off the Devices mangaer pop up from nowhere and tell me that it failed to install USB MT (i just hope i not mistake and it really "MT" because i not sure if i remeber the name right..) and it only happen to me when i dissconect the iphone... ,when it connected to pc the Devices mangaer do nothing till i disconnect it
i try to play a bit with the Devices mangaer but nothing not happening no matter what i done, i try to delete every apple program from the pc, restart ,and delete every reg file and leftover of apple programs... (done clean uninstall in other words) and when i connect the iphone then it was detected : D ( ARRRYYY!! (*0*)/ ) but when i reinstall apple programs it become undetected again! (ouch *-*....?) the iphone do have pics on it, and working great in other pcs.
why can't my hardware had not been detected? Is it because of I am using a wrong earpiece, as i am using it now. How am i suppose to know if i am using the wrong one
View 1 Replies View RelatedI have a Cowon O2PMP that works like a champ in all aspects except one. Windows 7 on my home PC will not detect the device. It tries to then gives me the "cannot connect USB" message. Therefore I cannot add/remove any of the data on the device. I've tried searching for Win7 drivers for it but they're non-existent.I have brought the device to my work and it picks up just fine on my work PC. Both machines are running win7 Pro.
View 1 Replies View RelatedI tried to reformat my dads hard drive to reinstall windows 7. It was in 2 partitions, so I ran the windows 7 disc and it ran through the motions, I formatted the c to re-install windows and it wouldn't let me. I went into dos under diskpart to try and format it that way, still no luck. I connected it to my computer then under disk management deleted the 2 partitions so there was only 1 now which had the size i.e, 600GB Unallocated. I connected it back into my dads computer and ran the set-up again. Now the computer wont even detect the drive. I need to re-format the drive to like factory default, is this possible, also do I have to do it in dos.
View 6 Replies View RelatedI am using a verizon uml290 usb modem on a Lenovo desktop computer and every time I connect to the internet I get the message of IP address conflict. I am able to connect and use the internet fine but I keep getting the message. When I check the event log there ate approximately 1800 entries and this computer is only a month old.
View 4 Replies View RelatedMy friend has an HP Pavilion DV6 Entertainment Notebook with Windows 7 Home Premium 64bit installed. It's only about 3 months old. I rebuilt the unit with a fresh copy of Win 7 HP 64bit as I did not want all the bloat-ware that came with the machine. The issue is that the unit is unable to see the optical drive (no optical drive icon). In the device manager, there is an exclamation mark next to the optical drive. It was working originally. Windows 7 normall takes care of the drivers for this drive doesn't it? Is the optical drive faulty. I've tried un-installing and re-installing but still hasn't corrected itself.
View 3 Replies View RelatedI Have a internal CDRW CED-8080B it appears as CD ROM Drive in the my Computer Section. Why is it not appearing as CDRW Drive?
It does Function Opens CD etc but when i try to burn i get an error. i did use a Windows 7 Trouble shooter and i said i could not burn with the drive i was then told that the Drive did not have Burning Capabilities. I Have Burn a CD In Win XP before i upgraded to Windows 7 i dont know why Windows 7 is not detecting it and only classes it as CDROM.
Driver Name: CDROM.SYS