No SLI Option, Second GPU Not Detected After Driver Update?
Dec 12, 2011
Windows 7 Home Premium 64bit Rebuilt my PC with a Gigabyte Z68XP-UD4 board and i5 2500k CPU. Everything installed and ran perfectly. Zero hardware or software issues. I've been running two GTX 465's in SLI configuration. They ran fine right after I first installed their drivers. SLI worked perfectly. Everything was going well. I was benchmarking Crysis, playing Skyrim, all that good stuff. Then, I booted my PC this morning, and Windows was automatically updating drivers. I checked which ones they were, and among them were PCI bridge, PCI to PCI connector, etc. Since the update, I no longer have SLI. In fact, my second GTX 465 doesn't even show up in the Device Manager. In the Nvidia control panel, there is no option for SLI, it just show "Set PhysX Configuration."
View 1 Replies
ADVERTISEMENT
May 16, 2011
Suddenly the Restart option on my PC has stopped functioning. After logging off and shutting down, the PC starts the process of restarting but gets stuck on the welcome screen of the motherboard. I can see the light showing had disk drive activity but no further progress takes place. I have to then forcibly stop the PC by pressing the start button long. After the PC stops, I can start it notmally by pressing the start button again and then it starts normally.Whether the restart option is used mouse Start/Restart or clicking on the <Restart Now> option after updates, the problem is the same.
View 7 Replies
View Related
Mar 1, 2009
Just tested HP Deskjet 6940 driver for use with HP Laserjet 6840. Though ink checking and HP printer feedback does not work 100%, it does do the job.
Could NOT get Vista (32) or XP (32) 6840 drivers to install, or function correctly.
View 0 Replies
View Related
Feb 8, 2012
Dvd driver not detected?
View 4 Replies
View Related
Feb 7, 2011
In my laptop existing OS is Windows 7 Home Premium x64.
Hardware config is
HP i7 Quad processor 1.7 GHz.
4 GB DDR3 Ram,
500 GB HDD.
My system perf is slow. I installed few softwares. I have deselected most of the startup services and programs from msconfig. Eventhough my system bootup time is slow, and whenever i open mycomputer it taking time to load.
I have decided to install Windows 7 Enterprise Edition x64 by formatting my C drive. But there is no option while i do clean install.
View 5 Replies
View Related
Sep 9, 2012
from where i can download bluetooth driver.I can't get download option for Bluetooth driver.
View 1 Replies
View Related
Mar 20, 2012
I am not sure if I can still fix this but I am trying not to lost hope here. This started when I upgrade my professional XP to windows7 Ultimate. I was able to use it for at least 3 months with no issue but then my computer crashed. I decided not to use windows7 anymore and then installed back my XP professional but even I have tried to uninstall and reinstall the XP os, my computer tends to use the generic driver of the video card. It will not detect now my monitor driver as well. I still have all th cd drivers but my computer always tells me it can't locate the driver. Should I replace or buy a new video card or is it my monitor driver that is damaged?
View 1 Replies
View Related
Dec 14, 2011
i upgraded my computer from xp pro and i lost my internet driver
View 1 Replies
View Related
Nov 23, 2012
my os install but hdd not boot may be drive disk controller or driver r missing how to solve problem toshiba laptop
View 1 Replies
View Related
Mar 30, 2012
When I open the PC, my hardrive and DVD rom was detected in bios but when the operating system started it shows the windows logo then after a second it shows a message that "the driver not found. Im confuse because i have only one hardrive which is the win7 installed on it. How can possibly that the PC did not find this driver but it shows the logo of win7?
View 1 Replies
View Related
Jan 15, 2013
It's HP M9652Uk with a none original drive. Silicon Power 2.5" SSD 60gb What drivers do I need and how do I instal them? Drive detected in bios but not during setup, also in ACHi mode
View 5 Replies
View Related
Nov 22, 2011
Just curious, Why ?? A video driver is software. I get a yellow exclimation point in the Windows Performace tab saying I need to run WEI again.
View 5 Replies
View Related
Jul 20, 2012
Recently I reformatted my HD and clean install win 7 ultimate 32 bit on my computer, bcuz of some problems when booting up, took like forever to boot or 2 to 3 restarts..At first BIOS cant detect my HD so I taught its a hardware issue I did like changing the sata cable also took it to a technician TWICE! maybe the sata port was broken they check all the connection, the last one did fix it but im still having difficulty booting up..He said one last option reformat, so i did reformat it successfully from win xp, now it boots up just fine its running good no problem for like a week yeah just 1 week!. Now my pc has new problem or is it?? Whenever I used it 2 to 3 hours my pc hangs so much even just opening event viewer would take me 5 to 10 mins and 2 errors always flood event viewer the first time i saw it disk error reach 5231 and nvistor32 reach 5366 errors, right now as I am writing this, Disk error reach a waaping 23,145 total. I think this is a serious problem that needs some fixing.
View 6 Replies
View Related
Nov 20, 2012
I have tried the driver from the official Broadcom website but it doesn't install, just says that bluetooth cant be detected. Looking for link somewhere for 64 bit version but where I can find the correct driver?
View 1 Replies
View Related
Jan 6, 2012
Ended up with this program which I think is making the system unstable. How do I get rid of it? No uninstall option in Control Panel.
View 1 Replies
View Related
Jun 12, 2011
I bought USRobotics. wireless USB adapter but have problem with driver. I installed driver software but still not detect from system.
View 2 Replies
View Related
Mar 15, 2012
pci device isnt installed
View 1 Replies
View Related
Nov 21, 2011
I have an HP Dx7500 that run perfectly.Before making any change i made a checkpoint for future restore. Than i update my AHCI driver (Instead regular IDE) to "Intel ICH/10R SATA AHCI controller" and windows update can't run, no error.. just clicking and nothing move.I fix it for now with system restore.. but i want my hardware to be most updated.
View 1 Replies
View Related
May 24, 2011
I started having some severe system hang - checked event viewer and found "The driver detected a controller error on DeviceHarddisk0DR0" many times over. I have an EVGA 680i SLI (122-CK-NF68) - updated chipset/storage drivers - no fix. I opted to reload Windows. Previously I had two stand-alone HDDs - I setup a Raid 0 and cleared the MBR before starting the new install."Expanding Windows Files" seemed to take much longer than usual and during the final phase of setup I got "Windows could not configure one or more system components". I repartitioned and formatted and tried again - this time after the initial reboot just as its attempting to load Windows to finish installation (before the point I got the above error) there was an error (too fast to see) and the system reboot itself and continued this cycle till I shut it off. I've had this machine for about 4 years and reload Windows about every 6-8 months. The above two errors back to back seemed like more than coincidence.
View 2 Replies
View Related
Oct 24, 2012
Recently built a new studio (recording) rig...with the following parts:
CPU: Intel Core�i7 3770K Motherboard: ASUS P8Z77-V Graphics: PNY Quadro FX380 Network: Intel 82579 Gigabit Ethernet Audio: RME HDSPe Multiface II Memory: 16 GB Kingston HyperX Genesis DDR3-1600MHz w/ Intel XMP Optical Drive: Asus DRW-24B1ST 24x DVD-RW Drive HD1: Crucial M4 2.5in SATA III Solid State Drive, 128GB HD2: Seagate 500GB Barracuda 7200.12 HD3: Seagate 1TB Barracuda 7200.12 Case: Coolermaster CM 690 II Advanced PSU: Corsair HX 650 Professional Series OS: Windows 7 Professional 64 Bit SP1 Yesterday (and then again today) I used the DVD drive (basically for it's firs real usage) to rip a few CDs. I ripped a couple with no issues...but then suddenly - after about the third or 4th rip - I would merely reach down, press the Eject button on the drive and the machine would instantly shutdown. No blue screen, no message, no nothing.
At first I thought it was static or something - just reaching over to the machine and pressing the button Event viewer says nothing. However I did see one obscure message back on Oct 7th that stated this:"The driver detected a controller error on DeviceIdeIdePort0"Gotta think that's this DVD drive port. But no other messages at all since then.Anyone got ANY ideas as to what the heck is going on? It's a SATA drive - maybe a cable? Maybe the drive controller is actually FUBAR-ed? Maybe the power supply? Motherboard (I hope not)
View 2 Replies
View Related
Nov 7, 2009
Any one know if driver update should take longer. Have tried to update a number of my driversafter a clean install of win 7, example being, monitor, it has a generic pnp monitor driver. When i click update driver it asks if i want to look on net which i do, it then looks for 1 second before saying driver is up to date, surely it should take longer to look or is this normal & surely there is a better driver than a generic one.
View 1 Replies
View Related
Sep 28, 2011
I have an LG W2242 monitor running from my laptop when I�m at my desk. Windows 7 has installed a generic pnp monitor driver, & does not allow me an option to remove it or update it. All options are greyed out. I want to update it with the LG drivers, because with the present driver, the screen does not respond to my power saving settings (the laptop screen does, when I�m using it).Does anybody know how I can force Windows to let me update the driver? FWIW, I�m the owner & trying to do this with full administrative rights.Tech Support Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bitProcessor: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz, x64 Family 6 Model 15 Stepping 13rocessor Count: 2RAM: 2046 MbGraphics Card: ATI Mobility Radeon HD 2600, 256 MbHard Drives: C: Total - 61443 MB, Free - 36726 MB; D: Total - 20481 MB, Free - 17183 MB; E: Total - 81925 MB, Free - 81060 MB; F: Total - 184323 MB, Free - 170698 MB; G: Total - 102406 MB, Free - 68504 MB; Motherboard: TOSHIBA, ISKAA, 1.00, 0123456789ABAntivirus: BitDefender Antivirus , Updated and Enabled
View 2 Replies
View Related
Jul 15, 2012
I have my laptop almost a year,and i don't have a problem until last month i update my nvidia driver, i getting bsod three times,and my laptop getting slow?
View 4 Replies
View Related
Apr 20, 2012
can anyone send me the links to update1) intel (R) HD graphics family2)radeon HD 6470M3)bios update for hp pavilion g6 1201tx
View 9 Replies
View Related
Sep 20, 2009
I have been running win 7 for about 6 mths now dual boot with xp. I have done a fresh install and got rid of xp and running win 7 straight up. My system is a Gigabyte AM2+ with a phenomII black edition 4 core., 4gb ram onboard video.
Now for the question. i got thinking today and realized i hadnt installed any chipset drivers etc. I look in device manager and all the drivers are from microsoft and from 2006 ? So i go to gigabyte and get the win 7 download but all it installs is the graphic driver and usb filter driver nothing else. I try driver max and it says my drivers are up to date. What am i missing here.
View 4 Replies
View Related
Oct 22, 2009
I just installed the latest ATI drivers for my video card, now in Windows update, there's an important update there for my ATI video card.
I'm reluctant to install it because I don't want it to override the latest driver from ATI that I just installed. Will the driver from Windows update do that?
Am I correct in assuming that the driver directly from the manufacturer is better than the one coming from Microsoft? Or are they just essentially the same? The driver from Win update is only 9mb +, and I think the driver from ATI is over 20mb.
If I decide not to install it, how do I keep it from reminding me over & over.
View 6 Replies
View Related
Dec 15, 2009
I am puzzled why Windows 7 is refusing to install a newer Realtek driver version for my net card. Using the device manager's driver update I currently have version 7.2.1127.2008 installed
the new driver is:
7.009.1105.2009 (inf info) translates into 7.9.1105.2009 (me thinks)
pointing the driver update to this newer driver tells "the installed driver is up to date"?
what am I doing wrong?
View 3 Replies
View Related
Aug 26, 2009
I recently downloaded the Batman Arkham Asylum demo, and it runs VERY slow. Anyone knows any update for my video card/driver?
My config:
NVIDIA GeForce 7025 / NVIDIA nForce 630a (Microsoft Corporation - WDDM) (MCP61)
I really apreciate the help, thanks a lot!
View 4 Replies
View Related
Jan 14, 2013
I just ran into a problem with my computer. My computer is running windows 7 64bit.
I got a new graphics card in today and put in my computer to crossfire. After I booted my computer back up it loaded fine, albeit slow, but crashed while installing new drivers for the card. Since then I haven't been able to get back on to that SSD(boot drive).
I can't access the advanced boot options to roll back the drivers that were installed as soon as the SSD was booted up.
looking in my bios for a shortcut, pressing f8 twice per second, holding f8 down, pressing f8 as soon as the bios screen goes away in between the system attempting to load. I just can't get to the advanced boot menu!
View 4 Replies
View Related
Dec 19, 2009
why my nvidia 9650m GT can't update the driver in my asus M50VN. everytime i try to update the driver. the driver is installed but show me some error message.
View 6 Replies
View Related
Oct 28, 2011
For some reason the driver for my large format scanner will not install stating it is missing a file in the TEMP folder, however when I open it it is there. (It stopped working, along with my other printer drivers at the update) I tried shutting off firewall entirely, and turning on read/write permission on the user folder but nothing avails. I even did a system restore but could not go back beyond the first update which is where the problem started I guess. Also the Remove or restore function of the installer shows same error.
View 8 Replies
View Related
