I just ran into a problem with my computer. My computer is running windows 7 64bit.
I got a new graphics card in today and put in my computer to crossfire. After I booted my computer back up it loaded fine, albeit slow, but crashed while installing new drivers for the card. Since then I haven't been able to get back on to that SSD(boot drive).
I can't access the advanced boot options to roll back the drivers that were installed as soon as the SSD was booted up.
looking in my bios for a shortcut, pressing f8 twice per second, holding f8 down, pressing f8 as soon as the bios screen goes away in between the system attempting to load. I just can't get to the advanced boot menu!
I have had itunes with an Wiondows XP 32 bit pc for many years. I now have a new pc with Window 7 64bit, i7-2600, 16 G RAM, and 1T of memory. My problem is I can not load itunes 10.6.3 into the pc. When I try, the program says it was interupted and the change did not take place. It then asks me to press finish or cancel. When I press finish, the program says thank you and gives me the4 option to store the program in G. I no longer have a G as that has been replaced by H. There is no opportunity to change the save location to H. and simply says to load the external disk, which does not exist.When I try to uninstal the itunes programs by strting with itunes first, the pc says that ituneshelper. Resources is not a valid short name.
I don't see much written on this, so it would seem I am one of the few unlucky people that can not get this critical update for EI9 to load. Have tried all the suggestions Microsoft suggests and even had it to a tech to look at, no simple solution seems to be available.
i cant get pop up games to load since the new window update on the 14th window pop up but then its just shows done its just a white screen now im getting all kinds of screen errors
i noticed my computer needed a restart after downloading a windows 7 update. I restarted it and now its in a continuous bsod to startup repair. everytime i get this:
Problem Event Name: StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown Problem Signature 04: 21200802 Problem Signature 05: AutoFailover Problem Signature 06: 29 Problem Signature 07: CorruptVolume OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033
I have tried chkdsk c: /f /r and no luck. Tried updating bios. I have tried a system restore but it doesnt work. i cant boot into safemode either.
Win 7 desktop, that is clear for a person that knows very little about Win 7 and can not make frequent visits to the PC. I am laid up in bed with a fractured ankle, post surgery where a plate and screws were installed.I have this laptop, crutches, and wheel chair.Last night, my wife shut down the PCShe noticed it was installing an update. I started the PC this morning and all was normal until the screen flashed "Loading Microsoft Operating System" or something to that effectImmediately after that flashed (for less than a second), the system powers off.A few seconds later, the power comes back on, the fans start, the BIOS screen appears, all like normal, and then shut down again. This will continue forever it appears, given I watched it repeat 4 times.
I am running windows 7 home edition. A couple months ago I got the bad image date virus that disable my google chrome and my epson workforce printer, I had found it disable my print spooler, I got rid the the virus, but it did more damage, I uninstalled the printer drivers and went through the windows services and set them all to automatic, but I cannot reinstall the driver.
Then I saw my graphics and sound drivers are out dated but I cannot update them either, it just times out when I try to update them. I noticed when I try to update other programs, they hang up on the system restore point, so I tried to create a new one. I get the shadow volume cannot be created message, I set the shadow volume services to automatic, and went through all the dependency's but I still can't create a restore point, I am guessing the problems are related
i have been playing Open Beta-free-to-play, browser-based games with no problems until the other night i turned off the computer and it down loaded windows updates .Now no beta games will load and run on my laptop they just freeze the browser and all tabs open i have to shut them down using the small box at the bottom.it must be something to do with the downloads as i have another computer that they will load on but this is too old and slow to run them on.
Ran Windows Update on wife's computer today (Biostar A75-MH mobo, AMD A8-3850, 8Gb DDR3-1600, 64Gb Samsung 830 SSD boot drive, Win7 x64) and upon restart it froze at 35% installing the updates. After it did nothing for 30 min I rebooted. It boots to the desktop but with an error box saying failed to load sortbls.nlp. Explorer isn't working, can run any programs, Start menu won't come up, just sits with the blue circle spinning. Tried to run system restore but the 11-15 one disappeared from the list when I tried to run it and now just shows the only restore point as Windows Update Critical Update from today which fails. Startup Repair says no problems.
I updated to the latest Windows 7 service pack this morning, upon restarting I can log in however nothing loads up. My screen is black, I am able to move the cursor. When pressing CTRL + ALT + DELETE a error message comes up stating:
"Failure to display security and shut down options. The logon process was unable to display security and logon options when CTRL+ALT+DELETE was pressed. If the operating system does not respond, press ESC or restart the computer by using the power switch."
I am able to boot in to safe mode, I have attempted a system restore to the time before updating this morning. However this stays at initializing for at the moment around 3 hours. I have no idea now what to do, I purchased this laptop in November 2011 which came preloaded with Windows 7 Home Premium Edition 64 bit.
Okay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS listed in the bios normally but windows does not recognize it, I tried using Kaspersky Rescue disk(the only CD I had along with the recovery disk)and when I used the File Manager, the hard disk still didn't show, are there any drivers I have to install?I have burned both fujitsu9that's my laptop) and Seagate's websites and can't find anything, I have searched forums but the only answers were "check if your hd is listen in bios".So, i IS listed in bios but I can't reinstall windows nor access it
emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found.click load driver to provide a mass storage driver for installation.
I'm new to windows 7. I use a linksys wusb version2.6. I have the driver burnt to a cd. I need a detailed walkthrough on how to load a driver file from a cd-r
I just got a brand new computer for christmas, it's a hp compaq dc5850, and it was working fine until now! I tried turning the computer on and it got stuck at the blue hp invent screen, I didn't know what to do, so I finally decided to just try and restore it. When I try to use the windows 7 disc to do this it keeps saying "no drives were found. Click to load driver to provide a mass storage driver for installation".
I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
My HP Pavilion with Windows 7 is not seeing my Samsung TS-H653L CD/DVD reader/writer. When checking my Device Manager for this unit, it shows the following message: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)." I tried to "update this driver" but the answer is that "this driver is up to date". Can't find any website with Samsung TS-H653L driver updates. Tried removing the driver and rebooting but same thing happens.
I've decided to try and format my laptop today, however I have a frustrating error that keeps occurring and I don't really know what to do.I have an ASUS U43JC laptop. When I purchased the laptop, it didn't come with any CD/DVD's. I've tried to install some of the drivers from the ASUS website, with some of them saying I needed to download the x64 version because what I had downloaded was x32 (even though I'm pretty sure I downloaded the x64 file...).
There's one file that I had downloaded, yet I'm not sure what to do with it; it's called U43Jc.216. Anyhow, this is the error that pops up when I'm trying to reinstall Windows 7: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now." If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step.
Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:
The driver DriverWUDFRd failed to load for the device WpdBusEnumRootUMB2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)
It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.
Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.From checking forums and searching I have found a few others with this issue and a few articles on its cause, WUDFRd failed to load for the device, Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2
I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!
I recently installed something called libusb, but when I shutdown I get the "blue screen of death", so I wondered if I'm able to unload libusb when I shutdown and load it when i start again.
I have an HP Dx7500 that run perfectly.Before making any change i made a checkpoint for future restore. Than i update my AHCI driver (Instead regular IDE) to "Intel ICH/10R SATA AHCI controller" and windows update can't run, no error.. just clicking and nothing move.I fix it for now with system restore.. but i want my hardware to be most updated.
Im having a couple problems with my computer, firstly when i boot up The icon for the LAN onnection has a red cross to say its not connected even though it is and it will recognise that it is after approx. 5 minutes and will only say network instead of the actual name if my connection (network99) secondly when i log on from booting up the desktop take a while to load and all the icon thumbnails load slowly one at a time and its really slow.
I am finding it totally impossible to load a driver for a new HP printer CP 2025DN on WIndows 7,despite several attempts the system gets to the final stage and then 'unable to load device', as I am at an end for ideas, can you please assist?
I have a Dell XPS , bought it 2 weeks ago , all good , but when I tried to re-install the nvidia graphics driver the windows crashed, and the boot system was down.Tried to fix it , couldnt , and I didnt make a backup either so I went for the format. At the moment the HDD is clean and when I try to install windows7 i get the following error:"Load Driver:a required dvd drive device is missing". I tried everything that I found on this forum/google related to this problem but with no success.
The 1386 Driver will not load on XP. On win 7 everything works, on xp this is what happens. Im able to connect to a LAN but unable to install the modem the customer wants as a backup.
