I have a Lenovo Thinkcentre M55 8813-a21 (LKRYA75). The sound works just fine in any Ubuntu installation i do, but I cannot get sound in either XP or Windows 7. I also couldn't get the networking drivers to work in XP so I am now on Windows 7. I have tried the driver download page on the Lenovo website, but none of them work. I don't know where to go from here.
View 3 RepliesI originally had been running windows XP on my desktop. About a month ago, I bought a new hard drive and installed Windows 7 Ultimate x64 on it. For the last month, I have been able to dual boot between Windows 7 and XP just fine.
When I tried to boot up my machine this morning, my computer no longer boots and have the following message on screen:
"Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key"
I checked my BIOS and found that only my new hard drive and CD ROM are detected. I imagined that my old hard drive with Windows XP on it finally died. So I disconnected the old drive, but I am still getting the same issue. I have tried changing the boot order. I also tried booting with the Windows 7 setup CD and tried the repair tools. None of them recognizes the Windows 7 installed on my new hard drive. I started command prompt and was still able to see the contents of the new hard drive, with its WINDOWS directory and all my data/installed programs, so I believe the new hard drive still works. Is there anyway for me to fix this without having to reinstall Windows 7 again and lose all the data/programs I have? Does this have something to do with my XP not being bootable anymore?
OS: Windows 7 Ultimate x64
Motherboard: Gigabyte GA-Z77X-UD3H
Harddrive: Seagate Barracuda 1TB 7200RPM 64MB SATA 6Gbps
I don't have any sound in my pc, there's a red cross on the volume symbol that says "No audio device installed", in device manager it doesnt appear any audio devices, I already downloaded the latest drivers from Asus but when I run it it says "No hardware detected", i already saw some threads in here with the same problem but couldnt find a solution. My motherboard is a Asus MAximus Formula and the audio is a Supreme FX II. I already tried to upgrade windows 7 with no results.
View 1 Replies View RelatedI have just done a clean install from xp to windows 7 64 bit, everything is working fine except i have no audio, in the right hand of the task bar i am getting no audio output device is detected. If i look on device manager there is a fault on the multimedia audio controller The drivers for this device are not installed. (Code 28)There is no driver selected for the device information set or element.To find a driver for this device, click Update Driver.
View 1 Replies View RelatedI'm dual booting Ubuntu and Windows 7 and I've got a wierd problem. Internet, both wireless and wired, works normally on Ubuntu but doesn't on Windows. I've installed wlan drivers but Windows somehow doesn't recognize any networks.
View 4 Replies View RelatedWhen using the installed windows 7 my laptop keeps crashing no matter what web browser I'm using, what antivirus I use etc. The 'not responding' thing always bugging me plus occasional BSoD and regular freezes. I tried clean installing using windows CD but that didn't solve my issue.
View 1 Replies View RelatedAbout a year ago I built my cousin a computer using some spare parts I had around using an original Creative Audigy as the sound card. Due to him trashing so that it had the BSOD, and me not quite liking the setup I had placed on it, I took the computer from him to wipe the OS and reinstall it. This time however the sound doesn't work and I've tried everything. I am not ignorant to computing and am 99% of the time self sufficient so this is an expert (mostly) reaching out to other experts as this problem has me stumped.I tried installing the drivers and reinstalling them, letting windows install it's default drivers to which it says it couldn't find any, installing a creative compatibility pack, removing Upper and Lower Filter entries in the registry (bit of a last ditch), standard windows troubleshooting in which it says "An unexpected error occurred. The trouble shooting wizard can't continue.", replacing the sound card with an Auzentec X-fi Prelude and installing and reinstalling its drivers, checking windows update for drivers, etc.
The two main errors I have are: "No audio output device detected" when hovering over the speaker icon with the red X, and "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" in the device manager with a yellow triangle flag over the device.Do note that this install is a striped install using RT Se7en Lite which took out things like Windows Media Player and the default drivers, etc. but since I realized that this could be the problem, I made a new partition and installed clean, unaltered Windows 7 32bit on it and the problem remains even on that install.
I've run chkdsk and sfc which got to about 13% and said it found corrupted files but couldn't fix them which might be the problem but the log didn't have anything I recognized as I haven't deciphered one of them before, so I am unsure and that could just be due to the stripping that RT Se7en Lite did (unless the master file list that sfc uses is generated from when you install windows, not just a default list).
I can't camera audio to work with Windows 7 64bit video works great but no audio
View 1 Replies View RelatedYesterday when I got home I could not get my headset working on my PC. It's a USB headset (Tritton AX720) but it works perfectly on my Xbox 360. There is sound coming from the headset but it is really quiet. My speakers to my computer work fine, it's just when I plug the headset in I'm not getting sound. I was working on it for about an hour last night and I can't figure out what is wrong with it. So far I've tried to make it my default audio device, I did a system restore to a few days ago, and messed with the setting a little bit. This headset has worked on my PC for about 6-8 months up until yesterday. By the way my audio for my computer is still working perfectly. It is only when I plug my headset in that it isn't working properly. I'm completely lost on what is wrong.
View 1 Replies View Relatedwhat will i do, there is no usb mass storage device driver detected in the device manager of my laptop.
View 3 Replies View RelatedI have been trouble shooting my sound for quite some time with no results. I've deleted and reinstalled drivers, checked bios, etc. no luck.here are my speccy details
View 10 Replies View RelatedAfter installing Windows 7, I got the message near de loudspeaker icon "no output device detected" and a red cross.When I go to control panel, sounds, I do not see anything written when I click the play-back button.My PC is a Packard Bell Imedia.The sound worked well until I installed Avast antivirus and Windows updates.
View 7 Replies View RelatedI formatted my new Satellite l855, and installed windows 7 instead of windows 8. See what is going in device manager. Screenshot:
Network devices are not detected at all (ethernet, and wireless). My AMD HD Radeon 7670M isn't detected I don't know what's going with those unrecognized devices (yellow) it's a new laptop, i just formatted it and installed windows. What should i do?
Specs:
Toshiba Satellite L855-B511
Windows 7 Enterprise 64bit
Intel (R) i7
AMD Radeon HD 7670M
8GB DDR3
If i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%
View 2 Replies View RelatedMy issue is that I have a usb device that when connected to my Windows 7 machine works just fine, however, when I connect it to a usb hub it does not. When connected to the hub, the device is detected by windows and goes from unknow device to the actual device name and the light on the device lights which it doesnt do if not installed properly.Has anyone else seen anything like this? Its not that the hub isnt working or that the device cannot be installed. Programs that interact with the device simply cannot when the device is hooked up to a hub.
View 3 Replies View RelatedSo im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
View 6 Replies View RelatedI turned my computer on to find no audio playing. My main audio device plays bac audio from DAW just fine but if I load a video in WMP i get a code C00D11B1. If I try to play a test tone in the sound settings I get "Failed to play test tone". I have other audio devices connected and also get the same errors which makes me think this is a registry error or some windows communication error. The only thing I think might have caused this is when I was trying to get my ram to run at 1866. This is a new build and the ram should run at this speed as it is in the QVL but that is another issue. I should also mention that I have tried reloading the device drivers, updated the BIOS, and restyored windows from a previous state with no change.
Asus sabertooth 990fx
Fx-8120
4x 4gb g skill Sniper
Visiontek HD 5770
2 seagate barracudas in RAID 0
This all started earlier today it worked fine yesterday no changes to my computer at all this only happens with avi files cant do system restore I dont use restore points uses too much HDD space
View 4 Replies View Relatedwhenever my computer restarts it gives me a message that says 'no boot sector on internal hard drive' then after a second a message pops up that says something a long the lines of 'press r1 to try reboot', etc ..everytime I hit f1 the computer will load up windows 7 fine though. But for some reason every single time I restart if gives me that 'no boot sector on internal hard drive' message
View 2 Replies View Relatedi installed driver hp and successfully install driver.HP ProBook 4530s Notebook PC*-* Download drivers and software - HP Business Support Center.But still in device manager not installed and when try for Bluetooth software. it show this message: no bluetooth device was detected. please make sure that your bluetooth device is plugged
View 1 Replies View RelatedSo I put together a new system today with the following specs. Nothing is overclocked yet as I have yet to recieve the aftermarket CPU cooler.
New Stuff
CPU - Intel 2500k
MB - Asrock P67 Ext 4
Ram - GSkill Ripjaw 1600 Cas9
Vid - 2x MSI GTX570 in SLI
DVD - Samsung DVD Burner
[Code]...
I installed Win7 Pro no hastles and updated it. Installed all the latest drivers etc.Left the PC while it was downloading something and came back to find the Network connection had disappeared. Restarted several times between loading on the newest drivers from Realtek. Each time I checked the device manager I was unable to locate the network device options. Each time i tried to re-install the drivers it would give me a message about "The Realtek Network Controller was not found. IF Deep Sleep Mode is enabled Please Plug the Cable". After doing some reading about it I tried removing the RAM and BIOS battery but to no avail. So I tried updating the UEFI from ASROCK, the existing version was 1.3 and I updated to 1.5. After doing that I was no longer able to load into windows. I read further that if windows had been installed with disk setting set to IDE instead of AHCI it would not work. I could not recall If I had enabled AHCI or IDE so I tried every combination I could come up with but no luck. I then tried to re-install windows but after it installs and reboots the pc it goes to the completing installation screen. I have some mouse control for a short period and then it seems to freeze. However the 3 little progress dots on the screen continue to move eternally. I tried rolling the UEFI version back to 1.3 and ran the same process again and the same result.
It's been several hours since i wrote that part. Since then I have managed to get windows 7 to install. The network device was recognised and worked correctly. I immediately disabled sleep mode for the network device. I updated windows and installed all the required drivers again. Then all of a sudden the connection drops again and no network device can be found. I then go and get the PCIe Intel network card from my previous machine which I had bought due to a faulty onboard network device. I disabled the on board LAN device in the UEFI and then shut down. Installed the Intel Network Card and rebooted. Windows does not find it even when I try and add a device.
Only other thing I can think of is to try and install on a regular SATA drive and see if it's some kind of conflict with the SSD.
I could really do with some help. Just installed W7 64 but when I come to install drivers it cannot even detect my x-fi SB at all. Thus I cannot install the driver. No sound at all - I am at a loss. Does anyone have a solution? ps I have a ASUS ABN-SLI Nvidia chipset.
View 6 Replies View RelatedEvery time im exploring my fone's memory card,or any other kind of storage like usb memory sticks, the window explorer closes down, and i have to open it agin,locate the folder i was on,but then it will happen again.
If i check Event viewer (System bit)it generates the following event: An error was detected on device DeviceHarddisk2DR2 during a paging operation.
Is my hard drive working ok?+ i noticed that my computer works slow,when im on windows explorer,going to my music,etc...
any help?
my audio sound driver is not detected from my laptop, and i need to install it urgently
View 1 Replies View RelatedSince upgrading our Fujitsu Siemens Amilo PI1505 to Windows 7 in the past few days I've only been able to get sound through a headset and not through the speakers. Not particularly having a clue what to do I've tried installing the original audio drivers but can't do so as Windows tells me that more up to date drivers are already installed.
Any ideas on how to resolve this problem and if indeed it is a driver issue any ideas how I can get the old driver to replace the new without Windows reinstalling the latest ones on Restart.
I've done a fresh install of Windows 7 yesterday on my desktop PC and I want to use the virtual PC for some USB hardware that doesn't have any x64 drivers.
I can choose the USB devices fine in the virtual machine, they are detected and XP starts the usual hardware install wizard.
However one of my devices gets the yellow exclamation mark in the device manager with a code 10 (device cannot start).
The virtual machine runs XP SP3, my laptop runs XP SP3 as well and there is no problem on there with this hardware. This leads me to believe that it might be a windows 7 Vmachine issue that is causing this.
I've tried removing the hardware and installing it again, but that didn't solve the problem.
Any ideas for a possible solution?
Hope someone can help me figure this issue out. Recently began having issues with my Globetrotter USB Mobile Internet device from ATT. ATT has been eliminated as the issue, and I am now pretty sure it is a Windows 7 issue.The device works for a while and then suddenly stops, and then I get a code that says it can perform better in a different port, or it says that USB device is not recognized, or I get the Code 43, Windows has disabled the device.I "tricked" it by trying to use a different flash drive device and it worked, I was then able to activate the Globetrotter and it worked for a little while, then stopped again.
View 4 Replies View RelatedI cannot seem to add a printer. The menu comes up with two displays; Add a device and Add a printer. The Add a device works but the Add a printer just blinks and returns to the screen.
View 5 Replies View RelatedI recently bought HP dv6-6102sa laptop which comes with beats audio. Does anyone know if I have to do some settings to make sound better or it will only work with beats headsets. I've tried normal headsets and I didn't noticed any difference sound quality.Also in quick guide, it says laptop got 4 speakers but I only notice sound coming out of 2 when I play audio.
View 9 Replies View RelatedI upgraded to ultimate 7 64 bit.... I have ATI HDMI audio.
My laptop is using an external monitor which I am connected to via HDMI. This monitor has an audio output that goes to computer speakers.
Programs like itunes will play audio perfectly, however when I try to watch a dvd i get nothing but static sounds. I have used windows media player, and windvd... same static audio sounds.
*When my computer is not connected to the external monitor via hdmi, the sound works fine when playing a dvd and coming out of laptop speakers...
I have an Intellimouse Explorer for Bluetooth that is not being detected by windows 7 with service pack1. I am unable to use the additional buttons or scroll wheel. The mouse is connected via microsoft dongle usb bluetooth receiver. The mouse does not connect to the system. The mouse is shows up as a HID-compliant mouse in Device Manager. installed Intellipoint 8.2. Intellipoint shows "No Microsoft USB Mouse Detected." I have uninstalling the Intellipoint software and reinstalled but not change
View 1 Replies View Related