No Network Device Detected?
Feb 25, 2011
So I put together a new system today with the following specs. Nothing is overclocked yet as I have yet to recieve the aftermarket CPU cooler.
New Stuff
CPU - Intel 2500k
MB - Asrock P67 Ext 4
Ram - GSkill Ripjaw 1600 Cas9
Vid - 2x MSI GTX570 in SLI
DVD - Samsung DVD Burner
[Code]...
I installed Win7 Pro no hastles and updated it. Installed all the latest drivers etc.Left the PC while it was downloading something and came back to find the Network connection had disappeared. Restarted several times between loading on the newest drivers from Realtek. Each time I checked the device manager I was unable to locate the network device options. Each time i tried to re-install the drivers it would give me a message about "The Realtek Network Controller was not found. IF Deep Sleep Mode is enabled Please Plug the Cable". After doing some reading about it I tried removing the RAM and BIOS battery but to no avail. So I tried updating the UEFI from ASROCK, the existing version was 1.3 and I updated to 1.5. After doing that I was no longer able to load into windows. I read further that if windows had been installed with disk setting set to IDE instead of AHCI it would not work. I could not recall If I had enabled AHCI or IDE so I tried every combination I could come up with but no luck. I then tried to re-install windows but after it installs and reboots the pc it goes to the completing installation screen. I have some mouse control for a short period and then it seems to freeze. However the 3 little progress dots on the screen continue to move eternally. I tried rolling the UEFI version back to 1.3 and ran the same process again and the same result.
It's been several hours since i wrote that part. Since then I have managed to get windows 7 to install. The network device was recognised and worked correctly. I immediately disabled sleep mode for the network device. I updated windows and installed all the required drivers again. Then all of a sudden the connection drops again and no network device can be found. I then go and get the PCIe Intel network card from my previous machine which I had bought due to a faulty onboard network device. I disabled the on board LAN device in the UEFI and then shut down. Installed the Intel Network Card and rebooted. Windows does not find it even when I try and add a device.
Only other thing I can think of is to try and install on a regular SATA drive and see if it's some kind of conflict with the SSD.
View 3 Replies
ADVERTISEMENT
Nov 4, 2012
what will i do, there is no usb mass storage device driver detected in the device manager of my laptop.
View 3 Replies
View Related
Mar 9, 2011
whenever my computer restarts it gives me a message that says 'no boot sector on internal hard drive' then after a second a message pops up that says something a long the lines of 'press r1 to try reboot', etc ..everytime I hit f1 the computer will load up windows 7 fine though. But for some reason every single time I restart if gives me that 'no boot sector on internal hard drive' message
View 2 Replies
View Related
May 31, 2012
i installed driver hp and successfully install driver.HP ProBook 4530s Notebook PC*-* Download drivers and software - HP Business Support Center.But still in device manager not installed and when try for Bluetooth software. it show this message: no bluetooth device was detected. please make sure that your bluetooth device is plugged
View 1 Replies
View Related
May 1, 2011
I could really do with some help. Just installed W7 64 but when I come to install drivers it cannot even detect my x-fi SB at all. Thus I cannot install the driver. No sound at all - I am at a loss. Does anyone have a solution? ps I have a ASUS ABN-SLI Nvidia chipset.
View 6 Replies
View Related
Nov 30, 2009
Every time im exploring my fone's memory card,or any other kind of storage like usb memory sticks, the window explorer closes down, and i have to open it agin,locate the folder i was on,but then it will happen again.
If i check Event viewer (System bit)it generates the following event: An error was detected on device DeviceHarddisk2DR2 during a paging operation.
Is my hard drive working ok?+ i noticed that my computer works slow,when im on windows explorer,going to my music,etc...
any help?
View 3 Replies
View Related
Mar 29, 2011
I have just done a clean install from xp to windows 7 64 bit, everything is working fine except i have no audio, in the right hand of the task bar i am getting no audio output device is detected. If i look on device manager there is a fault on the multimedia audio controller The drivers for this device are not installed. (Code 28)There is no driver selected for the device information set or element.To find a driver for this device, click Update Driver.
View 1 Replies
View Related
Nov 1, 2009
I've done a fresh install of Windows 7 yesterday on my desktop PC and I want to use the virtual PC for some USB hardware that doesn't have any x64 drivers.
I can choose the USB devices fine in the virtual machine, they are detected and XP starts the usual hardware install wizard.
However one of my devices gets the yellow exclamation mark in the device manager with a code 10 (device cannot start).
The virtual machine runs XP SP3, my laptop runs XP SP3 as well and there is no problem on there with this hardware. This leads me to believe that it might be a windows 7 Vmachine issue that is causing this.
I've tried removing the hardware and installing it again, but that didn't solve the problem.
Any ideas for a possible solution?
View 9 Replies
View Related
Aug 19, 2011
I have an Intellimouse Explorer for Bluetooth that is not being detected by windows 7 with service pack1. I am unable to use the additional buttons or scroll wheel. The mouse is connected via microsoft dongle usb bluetooth receiver. The mouse does not connect to the system. The mouse is shows up as a HID-compliant mouse in Device Manager. installed Intellipoint 8.2. Intellipoint shows "No Microsoft USB Mouse Detected." I have uninstalling the Intellipoint software and reinstalled but not change
View 1 Replies
View Related
Jul 20, 2012
Recently I reformatted my HD and clean install win 7 ultimate 32 bit on my computer, bcuz of some problems when booting up, took like forever to boot or 2 to 3 restarts..At first BIOS cant detect my HD so I taught its a hardware issue I did like changing the sata cable also took it to a technician TWICE! maybe the sata port was broken they check all the connection, the last one did fix it but im still having difficulty booting up..He said one last option reformat, so i did reformat it successfully from win xp, now it boots up just fine its running good no problem for like a week yeah just 1 week!. Now my pc has new problem or is it?? Whenever I used it 2 to 3 hours my pc hangs so much even just opening event viewer would take me 5 to 10 mins and 2 errors always flood event viewer the first time i saw it disk error reach 5231 and nvistor32 reach 5366 errors, right now as I am writing this, Disk error reach a waaping 23,145 total. I think this is a serious problem that needs some fixing.
View 6 Replies
View Related
Jun 19, 2012
After installing Windows 7, I got the message near de loudspeaker icon "no output device detected" and a red cross.When I go to control panel, sounds, I do not see anything written when I click the play-back button.My PC is a Packard Bell Imedia.The sound worked well until I installed Avast antivirus and Windows updates.
View 7 Replies
View Related
Jan 6, 2013
I formatted my new Satellite l855, and installed windows 7 instead of windows 8. See what is going in device manager. Screenshot:
Network devices are not detected at all (ethernet, and wireless). My AMD HD Radeon 7670M isn't detected I don't know what's going with those unrecognized devices (yellow) it's a new laptop, i just formatted it and installed windows. What should i do?
Specs:
Toshiba Satellite L855-B511
Windows 7 Enterprise 64bit
Intel (R) i7
AMD Radeon HD 7670M
8GB DDR3
View 2 Replies
View Related
Jan 4, 2012
I have a Lenovo Thinkcentre M55 8813-a21 (LKRYA75). The sound works just fine in any Ubuntu installation i do, but I cannot get sound in either XP or Windows 7. I also couldn't get the networking drivers to work in XP so I am now on Windows 7. I have tried the driver download page on the Lenovo website, but none of them work. I don't know where to go from here.
View 3 Replies
View Related
Jan 10, 2013
I originally had been running windows XP on my desktop. About a month ago, I bought a new hard drive and installed Windows 7 Ultimate x64 on it. For the last month, I have been able to dual boot between Windows 7 and XP just fine.
When I tried to boot up my machine this morning, my computer no longer boots and have the following message on screen:
"Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key"
I checked my BIOS and found that only my new hard drive and CD ROM are detected. I imagined that my old hard drive with Windows XP on it finally died. So I disconnected the old drive, but I am still getting the same issue. I have tried changing the boot order. I also tried booting with the Windows 7 setup CD and tried the repair tools. None of them recognizes the Windows 7 installed on my new hard drive. I started command prompt and was still able to see the contents of the new hard drive, with its WINDOWS directory and all my data/installed programs, so I believe the new hard drive still works. Is there anyway for me to fix this without having to reinstall Windows 7 again and lose all the data/programs I have? Does this have something to do with my XP not being bootable anymore?
OS: Windows 7 Ultimate x64
Motherboard: Gigabyte GA-Z77X-UD3H
Harddrive: Seagate Barracuda 1TB 7200RPM 64MB SATA 6Gbps
View 1 Replies
View Related
Dec 6, 2011
I just bought a new acer travelmate 5760-2434G64M laptop with windows 7 ultimate x64.Everything is perfect except the control panel harware and device doesnot show fingerprint device. also the Bio-protection software cannot detect the device.Device manager shows driver for Secure biometrics devices (EgisTec ES603).It shows the driver is up to date and working properly.I have tried installing the driver form the DVD provided and also from Acer website.
View 3 Replies
View Related
Nov 4, 2012
I don't have any sound in my pc, there's a red cross on the volume symbol that says "No audio device installed", in device manager it doesnt appear any audio devices, I already downloaded the latest drivers from Asus but when I run it it says "No hardware detected", i already saw some threads in here with the same problem but couldnt find a solution. My motherboard is a Asus MAximus Formula and the audio is a Supreme FX II. I already tried to upgrade windows 7 with no results.
View 1 Replies
View Related
Nov 7, 2010
So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
View 6 Replies
View Related
Jul 26, 2012
There seems to be a problem with the wifi. Normally, when the ethernet cable is not connected it would show the available wireless networks (like any other laptop).But now it does not detect any wireless networks including my home network and I am sitting right beside the router.I tried pressing Fn+F8(buttons to enable or disable the wifi) but that function isnt working anymore.
View 9 Replies
View Related
Jul 8, 2011
I'm looking for a way to have a batch file run when a network computer is detected.My laptop is often times inaccessible to my desktop unless I ping it first.So I've created a batch file to ping the laptop but now I need to find a way to have it run when the laptop is detected on my local network.Is there a way to do this through a windows event or any way at all?
View 2 Replies
View Related
Jan 15, 2013
I have recently run a virus scanner from mcaffee stinger. I had several virusus and it removed them. Although there gone I had just booted my laptop and it wont let me connect to the internet. It said limited access on the icon. I troubleshooted the windows network diagnostics and it said this. Problem found windows could not automatically detect this networks proxy settings. Whatever I try to run as administrator it will come up with an error saying
C:/Windows/system32/cmd.exe <-that was an example the name changes for different items.
I basically cant use it at all now. I go to the control panel and click right click properties to disable and it will come up with the same error. It also said windows has encountered an error saving the wireless profile specific error: the data is invalid.
View 1 Replies
View Related
Jan 2, 2013
When I start my PC up. I get that error, with an American logo or something. Then it shuts down after 15 seconds
View 7 Replies
View Related
Feb 8, 2012
About a year ago I built my cousin a computer using some spare parts I had around using an original Creative Audigy as the sound card. Due to him trashing so that it had the BSOD, and me not quite liking the setup I had placed on it, I took the computer from him to wipe the OS and reinstall it. This time however the sound doesn't work and I've tried everything. I am not ignorant to computing and am 99% of the time self sufficient so this is an expert (mostly) reaching out to other experts as this problem has me stumped.I tried installing the drivers and reinstalling them, letting windows install it's default drivers to which it says it couldn't find any, installing a creative compatibility pack, removing Upper and Lower Filter entries in the registry (bit of a last ditch), standard windows troubleshooting in which it says "An unexpected error occurred. The trouble shooting wizard can't continue.", replacing the sound card with an Auzentec X-fi Prelude and installing and reinstalling its drivers, checking windows update for drivers, etc.
The two main errors I have are: "No audio output device detected" when hovering over the speaker icon with the red X, and "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" in the device manager with a yellow triangle flag over the device.Do note that this install is a striped install using RT Se7en Lite which took out things like Windows Media Player and the default drivers, etc. but since I realized that this could be the problem, I made a new partition and installed clean, unaltered Windows 7 32bit on it and the problem remains even on that install.
I've run chkdsk and sfc which got to about 13% and said it found corrupted files but couldn't fix them which might be the problem but the log didn't have anything I recognized as I haven't deciphered one of them before, so I am unsure and that could just be due to the stripping that RT Se7en Lite did (unless the master file list that sfc uses is generated from when you install windows, not just a default list).
View 11 Replies
View Related
Nov 4, 2009
I'm in a pickle with my machine and Windows 7 after this latest update. On startup I get an error from MMDevApi.dll saying that it might not run on Windows or... something else. This also occurs anytime a program tries to use the sound card ie. WoW, Yahoo IM, Live IM, SL, etc. I've updated my sound card drivers to the newest ones. I still get an error that says the device is detected when going to "Sound Devices" in the control panel.
Trying to adjust the sounds themselves leads me to the Windows Audio thing... which won't start even from the component list.
View 1 Replies
View Related
Apr 4, 2012
I have a projector on my network which has LAN connectivity for the purpose of emailing error messages (ie. lamp due to be changed). The connection path is as follows:Using cat5e, I've connected the projector to a 5-Port Linksys SD205 where there are other devices connected. The SD205 is connected to a 24-Port Zyxel via cat5e which is where all network devices meet.The projector is properly configured with IP information. I am unable to ping the projector through the network. The port to which it is connected gets a brief, intermittent flash. If I connect the projector directly to the Zyxel switch, I can ping it and access it via IE.I thought the same so I swapped it out with a 8-Port Linksys EZXS88W but still get the same results.Perhaps it is a quirk with Linksys, so I swap out the switch with a 3com and still the same results.Why would this device connect when directly connected to the ZyXEL but not when going through the Linksys SD205? What does the intermittent flashing light on the Linksys SD205 mean?
View 9 Replies
View Related
May 7, 2009
I have installed Windows 7 RC on 3 computers and setup the network as a home network, skipped creating "home-group" I have 2 XP systems on same network that I need to access. Anyway, I cant seem to figure out why/what this unknown device in my network map is? It shows up on all the computers that have the RC installed. I have attached a pic of this.
Any ideas?
View 9 Replies
View Related
May 23, 2011
I see strange device among my list of devices and printer with the name Hitachi HTS543216L9A30. never seen it before I upgraded to windows 7. Do you think the great Windows 7 might just have uncovered something strange that has been eluded me all this while?
View 6 Replies
View Related
May 7, 2009
I installed the RC on 3 computers. Setup the network as a "home network". skipped the homegroup because I have 2 XP systems I need to access. any way, in the network map on the 3 RC systems a unknown device is listed. For the life of me, I cannot figure out what/why ?? I have attached a pic....
any ideas?
same setup when BETA was installed and didnt have this issue. No 3rd party firewall or network software is installed.
View 9 Replies
View Related
Jun 12, 2012
I had a problem with the computer after a storm it turns to not have internet. After I checked and saw I could'n connect to internet through the modem with a broadband connection. Than checked Device Manager and there was not a network controller and everything was in order no question marks or yellow rectangles. Than tried to re install windows 7. After I tried to install the realtek driver for me LAN it show up the message The RealTek Network Adapter/Controller was not found.
View 6 Replies
View Related
Apr 15, 2012
its like WiFi devise disappead is there a way to repair it. i mean power issue windows issue never had happen before restore not working. but wouldn't it show devise still ? its like there no network card. how that happen from windows failing?
View 1 Replies
View Related
Apr 17, 2012
Pci device not working and cannot use the wireless network
View 2 Replies
View Related
Sep 14, 2012
I just got a brand new comp it was working fine for a few months and it stopped working properly. It was acting funny and freezing sometimes then I got on another day and then it says No network adapter or driver is installed,also im booted off my internet and 3 of my usbs stopped working also. I've tried system restore the disc they gave me reinstalling the drivers. I finally got the usbs to work again but today they stopped.Under "Device Manager" there is no network options.I have done a boot-time scan along with and antivirus.
View 3 Replies
View Related