DVD-ram I/O DEVICE Error
Mar 9, 2009
I recently did a clean install of Windows 7 x64, and my I cannot install from my DVD drive. When i attempt to open the drive in command prompt it gives me an I/O device error message. I can open media disks with no problem, and the drive appears in both device manager, and windows explorer. I've attempted to find the firmware for the driver (mat****a UJ-840s) but I have not been successful. One more note I went from a 32 bit XP to the 64 bit windows 7
View 5 Replies
ADVERTISEMENT
Mar 1, 2010
I have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
View 8 Replies
View Related
Mar 9, 2012
I installed Ubuntu side by side to my win 7. On the install it would only install to an external drive I have. After the install completed an I restarted my computer and I got an error message=" error: no such devive: 868152e-2012-469b-b469-ebc2c953dfb4.grub resue>"I restarted my computer a few times and kept getting the same message.I decided to restore my computer back to factory defaults. After doing this I restarted my computer but kept getting the same message.
View 2 Replies
View Related
Jun 26, 2011
I have a laser projector, and i control it with my windows seven notebook by usb.
Problem is, sometimes by a static shock of other devices or by other causes i do not know of, the notebook suddenly refuses to work with the usb drive anymore and the projector freezes.
but here is the part i want to solve. after replugging the usb drive windows says that the usb device is not regonised.... after plugging out and waiting 2 minutes and then replug makes it work again...if i do it sooner then usally it still shits about the device not being regonised.
View 9 Replies
View Related
Aug 17, 2011
Recently, I've started getting an error which says: "Your USB Composite Device can perform faster if it is plugged into a hi-speed port" "The hubs shown in bold type have free ports that can support the HI-SPEED USB device"
It then lists two bolded options for a hi-speed ports: A USB Root Hub with 6 ports, and another with 4. This error occurs on both my Windows 7 equipped Dell XPS15 (which has 2 USB ports) and an older Dell laptop which runs Vista (3 USB ports)
This is shown after my external drive (a seagate model) disconnects from my computer, which usually ends poorly for me, since I typically run Photoshop off my drive.
I'm wondering if these errors are caused by a new USB splitter I bought. It has 4 ports, but the model year and quality of the thing are dubious at best; my webcam and wireless mouse are also typically attached to it, and the webcam disconnects at the same time as the external drive. The mouse still works though, so that's pretty mysterious.
View 1 Replies
View Related
Nov 30, 2009
Every time im exploring my fone's memory card,or any other kind of storage like usb memory sticks, the window explorer closes down, and i have to open it agin,locate the folder i was on,but then it will happen again.
If i check Event viewer (System bit)it generates the following event: An error was detected on device DeviceHarddisk2DR2 during a paging operation.
Is my hard drive working ok?+ i noticed that my computer works slow,when im on windows explorer,going to my music,etc...
any help?
View 3 Replies
View Related
Nov 16, 2011
I just bought a amd phenom ii x4 955 and a asus m4a88tm le motherboard . After that i formated my hdd and installed win 7 ultimate and amd motherboard drivers. Now when i connect a usb device it shows Unknown usb device (except my mouse and keyboard).
View 6 Replies
View Related
Jun 5, 2012
my bluetooth is not working .. my dell model is inspiron n5110..
View 1 Replies
View Related
Jun 30, 2012
I have an Acer Aspire On 10inch Notebook that runs on Windows 7 Premium Edition (32bit). I'd been having some troubles with its speed for a day or so and since I'd neglected to do a Windows update. So, I restarted it and hoped that once it installed those updates everything would be fine. My first warning sign was the time that it took to turn off - probably 15 minutes was spent with the screen continuously saying "Shutting Down" and I took this to mean that it was probably a series of updates that I had missed. So, I left it to sit and came back to check on it afterwards.When it finally finished, a black screen took over and sat there for quite some time. Eventually I grew frustrated and restarted the computer, and saw the 'Acer' screen come up, and then the computer screen went black again and a command line started, where I received this message[CODE]
View 3 Replies
View Related
Jan 11, 2013
USB Device not Recognized::error while connecting my external hard disk,previously it was working fine
View 2 Replies
View Related
Jun 28, 2009
It all started with my pc restarting(it was a power failure) to show boot device failure, insert system disk, i tried everything, from unplugging usb devices to re inserting sata cables but to no avail, now when i try to reinstall windows the setup recognizes all my partitions but refuses to install into any of them, ubuntu only recognizes one of my hard disk and partition( i have 1 big 500 g hdd as 1 part, and 2 250 g hdds in raid 0).
I tried booting from my bart pe created windows live cds but they dont detect any partitions what so ever, windows 7 dvd's repair utility can access my file structure when i browse for drivers, but it wont repair the problem, nor will it install.
View 9 Replies
View Related
Jan 30, 2012
My friend's desktop PC had this issue, it runs Win 7, is an HP and is just one year old. It either gives the "Unable to boot device error", or asks for the Windows CD that he doesn't have (bought it at a department store, it came with Win7 original installation but no CD). It doesn't open Windows. It still recognizes it as a hard drive in the BIOS screen, the startup order was never altered and should be Hard Drive then CD/DVD. Searching for a quick solution he found suggestions to try and change from AHCI to IDE in the BIOS and at last it got to Windows startup. Win7 in safe mode prompts him a repair mode that's going on for two hours.I downloaded the hard drive maker's tools for diagnostics (they're burnable on a cd) and will try them if this windows repair mode keeps going on indefinitely.
View 1 Replies
View Related
Mar 22, 2012
i get the ACHI Port3 Device Error...Shld i get rid of it or is their a Way( i wish their was i cant even afford another computer personally issues
View 5 Replies
View Related
Jan 31, 2012
Whenever I use one of my USB ports, afterwards I get an error that lasts all the time that says USB device not recognized. I have gotten rid of it but then when I go back and use it again, that error pops up. The usb ports work, I use it to download pictures and other things, but I cannot get the error gone. Someone suggested I unplug the internet completely for a few minutes and it would reset itself, but that didn't work. I put the media card usb back into the port and went to where it says it is safe to remove hardware and then took it out, but that didn't work either.
View 9 Replies
View Related
Sep 30, 2009
I got Windows 7 ultimate 64bit from microsoft technet. Everything is working fine except for the USB ports in the back of my computer, when i go to device manager I get the error: Code 43Windows has stopped this device because it has reported problems. (Code 43), I have tried the drivers for my motherboard from the Gigabyte site, the ones for Vista 64bit, but no luck,
View 9 Replies
View Related
Oct 4, 2011
i have an acer aspire one notebook and one day it was working and the day after when i turned it on it goes to the normal acer loading sign then the screen goes black and makes a beeping noise for about 10 seconds then this error comes up
Intel UNDI, PXE-2.1 (build 082) Cpoyright (C) 1997-2000 Intel Corporation For Atheros PCIE Ethernet Controller v2.0.0.9(05/08/09)
Check cable connection! PXE-M0F: Exiting Intel PXE ROM. No bootable device -- insert boot disk and press any key When i click enter this message just appears again.
View 5 Replies
View Related
Nov 19, 2011
"Windows has encountered a problem communicating with a device connected to your pc.This error can be caused by unplagging a removable storage device...,or by faulty hardware such as a hard drive or CD-ROM.Make sure any removable storage is properly connected and then restart your pc.
View 1 Replies
View Related
May 17, 2009
I was trying to install Widows 7RC on Sony VAIO CS-14G laptop. I inserted the disc, clicked on Install and got the following error:
[code]....
View 6 Replies
View Related
Jun 27, 2011
Somehow I messed up install of a PCI wireless adapter. Device Manager says 'device not working properly because it can't load drivers: code 31.
I've pulled the adapter card out. ran the computer awhile without it, reinstalled it and same problem.
Then I did the registry thing about upper and lower filter deletion but the filters are not listed. Yeah I went to the right place in the registry to look.
View 2 Replies
View Related
Aug 8, 2011
When i turn my laptop on it comes up with: AHCI port0 device error. At the moment i am trying to re install windows 7 but it (after changing the BIOS) it gets to a screen where it states that it is starting?
View 2 Replies
View Related
Jan 4, 2012
Windows 7 ultimate 64, my Atapi iHAS124 B ata CD/DVD device keeps "disappearing" try running the Microsoft "fis it now"...and get A driver service for this device has been disabled. An alternate driver may be providing this functionality. Code 32 Tried uninstalling the device and installing new drivewr....same result. This is the 2nd time it has happened...last time I ended up having to rebuild the system from scratch.
View 7 Replies
View Related
Mar 7, 2012
Directx device creation error?
View 2 Replies
View Related
Mar 8, 2012
my computer is upgraded from Vista to 7. I am getting a device manager restricted error.
View 1 Replies
View Related
Oct 4, 2012
i was watching a movie on my laptop, all of sudden my external hard drive stop working. i can not see it.
View 1 Replies
View Related
Dec 17, 2012
D3d device error code 2005530516?how to solve this error?
View 1 Replies
View Related
Jul 5, 2010
i have a toshiba satellite l555d and i turn on the USB device say a error code 43.
View 3 Replies
View Related
Jun 18, 2009
"No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok"
I Ve been trying to install Windows 7 RC on my Sony Vaio VGN 123 E and i managed to get my DVD fully working (booting windows 7 installation and all), but the las issue im having installing Windows 7 is that eveyrtime i get into the Install now screen, and i click on install now, it goes and show me a screen with this message:
No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok.
That message gives me 3 buttons: ok, cancel and browse, neither of OK and CANCEL would let me through the install, and with browse i have tried to find those missing drivers but without succeed.
I have read almost every near installation post on this forum and googled that error with no further
FYI:Vista Home Premium already Installed on Laptop. DVD/RW rom is working perfect and window7 does boot perfectly then why the hell it needs drivers again? I do not have drivers for Cd/dvd rom.
View 9 Replies
View Related
Feb 7, 2013
I got a start up error no device drivers found.
View 5 Replies
View Related
Jan 28, 2012
[URL] It originally had 64 bit Vista but I had a Windows 7 Home Premium 64 bit key laying around so I Downloaded the W7 iso and tried both burning it to a cd and using a usb but both had this error popup.The error said:"The drive is not ready for use; its door may be open. Please check \Device\Harddisk0\DR0 and make sure that the disk is inserted and that the drive door is closed."
View 4 Replies
View Related
Feb 10, 2012
So I built my own PC late last year and have had absolutely no problems with it whatsoever, until my brother plugged in his JVC HD GC-FM2 camera. This camera is supposed to be able to be plugged into any PC without issue and without the need to install software/drivers, but for me it blue screens. I am able to plug in other USB devices just not this camera.I'm running Windows 7 Pro 64 bit, my computer is up to date, to the best of my knowledge anyway lol. I checked event viewer and if it's
View 3 Replies
View Related
Jun 4, 2012
I've already tried reinstalling Windows 7 and several other instructions i found on the internet but nothing has worked so far.
View 1 Replies
View Related
