"No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok"
I Ve been trying to install Windows 7 RC on my Sony Vaio VGN 123 E and i managed to get my DVD fully working (booting windows 7 installation and all), but the las issue im having installing Windows 7 is that eveyrtime i get into the Install now screen, and i click on install now, it goes and show me a screen with this message:
No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok.
That message gives me 3 buttons: ok, cancel and browse, neither of OK and CANCEL would let me through the install, and with browse i have tried to find those missing drivers but without succeed.
I have read almost every near installation post on this forum and googled that error with no further
FYI:Vista Home Premium already Installed on Laptop. DVD/RW rom is working perfect and window7 does boot perfectly then why the hell it needs drivers again? I do not have drivers for Cd/dvd rom.
I installed Ubuntu side by side to my win 7. On the install it would only install to an external drive I have. After the install completed an I restarted my computer and I got an error message=" error: no such devive: 868152e-2012-469b-b469-ebc2c953dfb4.grub resue>"I restarted my computer a few times and kept getting the same message.I decided to restore my computer back to factory defaults. After doing this I restarted my computer but kept getting the same message.
Whenever I use one of my USB ports, afterwards I get an error that lasts all the time that says USB device not recognized. I have gotten rid of it but then when I go back and use it again, that error pops up. The usb ports work, I use it to download pictures and other things, but I cannot get the error gone. Someone suggested I unplug the internet completely for a few minutes and it would reset itself, but that didn't work. I put the media card usb back into the port and went to where it says it is safe to remove hardware and then took it out, but that didn't work either.
I go to install the drivers and i reboot, yes i did everything correctly. even tryed vista drivers. I try to open up ATI control panel which is showing that its there and i get an error message. I goto the directx tool and its showing nothing for my display. which is very odd? It shows my card in device manager. Somehow i think my card and the drivers are not connecting. Ive tried to clean install the drivers probably 10 different times and nothing has worked.
i have sony vaio laptop with windows 7 home edition now i want to install windows 7 pro in my laptop.i have the ISO of win pro, because my CD drive not working i m trying to install from the USB .. windows setup started but it shows error when i click "Install Now""No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok"That message gives me 3 buttons: ok, cancel and browse, neither of OK and CANCEL would let me through the install, and with browse.
[code] So I get the Comp built, and did not have a windows iso yet, so I put Ubuntu 11.04 on it. When I tried to put on Windows 7 64-bit, via live USB, I get to the Install Windows button (very early in the process), before it gives me the error LOAD DRIVER: No device drivers were found. Make Sure the installation media contains the correct drivers, and then click OK.So I can browse for drivers, and I have downloaded the Windows drivers for the Sata and AMD 970 chipset from Gigabyte, but the install windows screen does not pick them up. I hit browse and then find the folder i saved them in and hit ok, yet it finds nothing.My bios have been changed from AHCI to IDE with no luck.
My computer started to freeze up a lot and now I receive the following error message on startup: "Reboot and Select proper Boot device. Insert Boot Media in selected Boot device and press any key."It is a Windows XP OS.
I am receiving an error message on my Gateway One ZX4300-01e. It continues to ask me to: Reboot and select proper boot device or insert Boot Media in selected boot device and press a key.I bought this computer on ebay. it was a seller refurbished item and does not have a boot recovery disk.
I was doing some printing and it was fine. Right in the middle of a multiple page print job I got a printer error. Troubleshooter indicted a HP Photosmart C310 driver was missing. I went to Device Manager and every entry under Other Devices was missing their drivers. The C310 printer, the SM Bus Controller and the Ethernet Controller. Windows Update was unable to find and install any drivers. Why all the Other Device components lost their drivers at the same time?
We recently had to purchase a new computer, it has Windows 7.No matter what I plug into the computer via usb - Nook Color, camera, flash drives, external hard drive, etc, I get the message "This device is currently in use. Close any programs or windows that might be using the device and try again." Since is happening with every device I plug in, I'm guessing it is a Windows 7 problem. Is there a way to fix it? I've been just pulling the usb out but someone said I should shut down the computer first.
I built my first computer yesterday, and for quite a while everything seemed to go well. My BIOS is working fine, hard drive is visible etc. However when I try to install Windows 7 Home Premium (system builder edition) I get the message "A required CD/DVD drive device driver is missing".
I have recently built a new computer not so long ago. But starting today a Message of my "USB Device being unrecognizable" kept popping up.It is always my Razer DeathAdder mouse that dies in the process. I checked the Device Manager and under "Razer Device" It has the "Virtual HID Minidriver" with the computer and question mark icon at the bottom right of the computer icon. Does that mean it's the problem? This is the image of the message:
I ran AVG and Malwarebytes Anti-Malware but nothing showed upHere is my Malware log:Malwarebytes' Anti-Malware 1.50.1.1100 [URL] version: 6210Windows 6.1.7600Internet Explorer 8.0.7600.163853/29/2011 11:57:42 PMmbam-log-2011-03-29 (23-57-42).txtScan type: Full scan (C:\|)Objects scanned: 278550Time elapsed: 14 minute(s), 47 second(s)Memory Processes Infected: 0Memory Modules Infected: 0Registry Keys Infected: 0Registry Values Infected: 0Registry Data Items Infected: 0Folders Infected: 0Files Infected: 0Memory Processes Infected:(No malicious items detected)Memory Modules Infected:(No malicious items detected)Registry Keys Infected:(No malicious items detected)Registry Values Infected:(No malicious items detected)Registry Data Items Infected:(No malicious items detected)Folders Infected:(No malicious items detected)Files Infected:(No malicious items detected)A few has suggested to turn off the computer and disconnect all power for 30 mins and turning it back on. I tried that and it didn't workI also uninstalled all the USB hubs and controllers under the Universal Serial Bus controllers, and rebooting the computer to reinstall it, but that also didn't work.I went to the motherboard website and Also downloaded the latest USB drivers, didn't work either.The problem would always show up as an "Unknown device" when I click on the error message, Even when I look into the "device and printer" window the device would pop up as "unknown" then disappear, even though all my devices would be working properly. If I make slight changes to the mouse, like adding advance functions for my extra buttons on the mouse, the mouse will die and not work until I unplug and plug it back in. I have Windows 7 Ultimate 64 BitAMD 6 Core black editionMotherboard version: ASUS M4A89GTD PRO/USB3 AM3 AMD 890GX HDMI SATA 6Gb/s USB 3.0 ATX AMD Motherboard?
I keep receiving a pop-up with the above message concerning my USB ports..when nothing is connected. From reading around I suspect the problem may be a stray driver from some software package but how do I detect which? I can see at least one in Device Manager relating to a programme I've deleted in the past. Another is for Virtual WiFi (I had difficulties with the MiniPort Adapter at one stage) but I gather that will be coming into use at some point? Bit of a novice, can someone reassure me how to detect the problem and fix it?
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
I have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
last night i turned off my computer all fine and working, then when i wake up and turn it on, it comes up with the Reboot and select proper boot device message, i cant access the computer to actually use it... and i dont think i have any windows 7 discs to repair it at all.....
I recently built a new rig and attempted to install Windows 7, yet when I attempted to install the software from the disk I received the message "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device". I have changed the boot order in bios (I have a Gigabyte Z77- D3H motherboard) but that has not helped, with it not booting from the drive with the disk in that I assigned.
I can't find anything on this and all 501/505 message posts are related to Windows XP not 7. But, I have a 501/505 error message in my Windows 7. Funny thing, it is a problem with all my browsers (IE and Firefox) and I cannot access any website with the www. prefix. Urls without this prefix works fine. The only thing I can think of is that I downloaded and installed a Java update yesterday. Did this cause the 501/505 error problem? I also tried following the steps recommended by Microsoft for XP [URL]
I keep getting a window with this error; when I close the window it simply reappears: "Application Error" Exception EListError in module en.cpl at 00013BF2, List index out of bounds (0)." It didn't appear after I tried opening any specific program, it just appeared randomly. Is this a virus? How do I stop this?
I have Windows 7, Live Mail. Mail with attachments come in with no problems, like photo attachments, but my mail will not go out with photos attached. They are not huge files. I get an error message "error/tasks" but then that screen freezes.
Before my computer was working fine when i am connecting to the internet using a portable usb internet huawei. Then one morning when i tried to connect i got this "Error: 720".
My asus Eee pc 1005HAB is not properly working, whenever I open it there's a reboot and select proper boot device or insert boot media in selected boot device and press a key...message.
Im trying to install windows 7 on this PC i have just bought from ebay but it wont let me .This message comes up and i Cannot get any further.Windows cannot be installed to the disk. This computer's hardware may not support booting to the disk.Ensure that the disk's controller isenabled in the computers bios menu.
I am with BT Yahoo, and have two computers one desk top and one Lap Top used in travels, when going to my emails it starts to download the emails and then stops with an error Bt Server timed out,in order ro try again I have to come out of Live Mail and back in with luck it continues to load my emails, why is this? and should one download Windows Live again or is it BT at fault ?
I sent an email to my other account. I called it Test. Here's what it showed.Sending Message - TestStatus = mail sent successfullyProgress 100%(This stayed on the screen for 1 minute and 50 seconds)In the lower left corner of the screen it says mail sent successfullyIt did put it in the sent folder.The email never made it to the destination email address.If you send an email and cancel the sending email message you get the message.There was an error saving the message to. Retry?Click the ok Button and the message goes away.It did put it in the sent folder.
Basically, my Windows was messed up so I re-installed Windows Vista 32 bit onto my computer. My copy of Windows 7 is a .iso from Microsoft and its 64 bit. Whenever I try to run i get an error message about it being the wrong type of Windows. I'm guessing that this is because I have 4gb of ram but windows vista 32 bit has reduced it to 3gb and I read online that you need at least 4gb to run Windows 7. How do I go about re-installing Windows 7?
