NVidia NForce Network Controller - Device Do Not Start (Code 10)
Jul 13, 2012
I have a compaq presario V3000 (mine is a V3015nr), When I bought it, it had windows xp and the ethernet and wireless connection worked well, then, I decided to upgrade it to win 7, but then, the drivers just crashed, I fixed this and everything was working well, but then, this error appeared and since that I'm unable to use wireless connection. I've searached a lot of drivers but all of them are for Windows xp, or windows 7 x64.. Mine is an Windows 7 ultimate x32
View 2 Replies
ADVERTISEMENT
Dec 4, 2009
Upgraded from Vista to Windows 7. After installation Nvidia nforce Networking Controller stopped working. It is recognized under Device Manager but gives ' device cannot start. (Code 10)'
It's a Compaq Presario f755us with Nvidia chipset Nforce 560 and Southbridge Nforce 560. I've tried several different drivers as well as the drivers for Nforce 560 on Nvidia's website(NVIDIA DRIVERS 15.23 WHQL) however all have been ineffective. Installed the windows vista 32 bit versions of all drivers (also tried two xp drivers).
View 9 Replies
View Related
Feb 14, 2012
NVIDIA nForce system management controller has a yellow sign on the icon.When I startup my computer, a message pops up in the task bar called Driver Installation (or something similar). It keeps loading, but then it says that it failed, and when I click on it, the driver that Windows was trying to install was:NVIDIA nForce System management controller.There is also a red X on the network tray icon on the taskbar, like this: This is not my desktop, but this is an example of how the icon looks like. ONLY the icon, as I said I can't connect nowhere, wireless doesn't detect anything, and wired network doesn't work either, and the icon with the red x is always there.
View 8 Replies
View Related
Sep 19, 2011
Re: NVIDIA nForce Networking Controller win 7 64 bit drivers for dfi lanparty ut expert I get the message: Networking controller could not start. Code 10.
View 5 Replies
View Related
Nov 23, 2009
I hope that's the reason this isn't working...
When I start up my computer (Windows 7 Ultimate (not the beta)) My Internet connection thing says it can't connect because I'm trying to link to multiple networks. Well, that would make sense... if I were using a wireless network. I'm using a network cable to router and cannot access my own network. But even that's not the problem. I don't care about my network. I just want to connect to the Internet.
Well, to get a quick fix I must disable my network device, and re-enable it. Then it acts as if there was never a problem.
Today, before I did that I wanted to see what the problem was, so I opened the status of my network connection. I am receiving all kinds of bytes but not sending any. So then I disable and refresh my network connection and it all works.
I fixed this in the beta, but forgot what to do now that it's been 3 months. Can anyone help?
View 9 Replies
View Related
Oct 11, 2009
I have a problem with my Internet connection on Windows 7 x64 build 7600. My Internet connection is dropping randomly almost every day. I have an Asus M3N H/HDMI motherboard with NVIDIA nForce Network Adapter. I tried numerous drivers (even drivers for Vista x64), disabling IPv6 (with the DisabledComponents registry entry), disabling Receive Side Scaling and many other possible solutions with no luck. I have a high-speed Internet connection through LAN. My IPs are set by the DHCP but I don't have access to the Internet even when the IPs are configured correctly.
Sometimes, the DHCP allocates strange IPs like 169.xxx. or 192.168.xxx. , my default being 89.47.212.250 for my IP and 89.47.212.1 for the default gateway. The strange thing is that the connection can work for like 9-12 hours without any drop and the next day I don't have access right after I turn on my PC and it stays down for random periods of time (10 minutes, 30 minutes or hours). Also, if i have Internet access and I disable and enable the adapter the connection is lost but my IPs and DNS are fine.
I've uploaded a printscreen with the ipconfig /all command. Hope someone else had a similar problem and solved it.
View 9 Replies
View Related
Oct 25, 2009
I got motherboard: Asus m2n-mx se plus. Video Card : nVIDIA nForce 6150SE (6100-430), Onboard Audio : nVIDIA MCP61 , D-Link DFE-520TX PCI Fast Ethernet Adapter .
My Motherboard comes with Vista drivers, but I heard that even that are creating problems for video and audio. Should I download any specific drivers beforehand?
View 2 Replies
View Related
Dec 9, 2012
My webcam is not working on skype and when i go to check the image device i get this (This device cannot start. (Code 10)... message on the property.
View 2 Replies
View Related
Oct 23, 2009
I had this same issue on the RC but am now getting it on the retail.
Windows 7 Pro x64
Asus P5N32-E SLI with nFocrce 680i chipset
On RC, if i installed the nForce driver package then my ethernet would randomly fallover under high network activity (only internet would fall, LAN would remain) To fix i would right click network icon in system tray and select troubleshoot problems, this would then fix it.
But it did it so often that i ended up removing the nforce drivers and letting windows 7 use its own driver, after which i never had a problem again.
Now i'm on retail im getting similar things although now its not happening with high network activity, it just happening randomly.
For retail i'm using the brand new nForce v15.51 drivers and its still randomly killing my network connection, but this time everything is falling over, LAN and net.
Is anyone else seeing this sort of behaviour when using the nvidia nForce driver package?
Its really irritating and i'm very suprised nVidia have still not fixed such a glaring bug.
View 3 Replies
View Related
Oct 16, 2012
I am getting this error in device manager over and over and over, i have uninstalled the driver, and reinstalled it over and over, i keep getting the same error, my hauppauge colossus card was working perfectly then all of a sudden i get this error, i have used ccleaner to repair my registry all to no avail, I think i need to do something in the registry to fix this but have no idea exactly what. What do i do?
View 12 Replies
View Related
Jan 12, 2013
I have a Nikon Imaging scanner which my PC detects on connection. I have the correct driver which device manager installs with a code 10 error, the device cannot start.My PC is running Windows 7 64bit. I should point out that the scanner works correctly on my old PC running Windows XP, so there is no problem with the hardware. Anyone got any ideas why I might be getting the code 10 error on my new PC?
View 6 Replies
View Related
Nov 11, 2009
I just formatted/installed Windows 7 Home Premium 64. I have, as the topicsuggests:Nvidia nForce 680i SLI motherboardI downloaded the drivers from Nvidia's web site for the Win_7_64 drivers for this motherboard, but it will not allow me to install the Ethernet drivers when installing the WHQL download.Has anyone else had this problem? Any idea of how to get my PC back on the intarwebz?t: After looking through the .exe with all of the motherboard drivers, I've found that they do include an Ethernet driver, but during the installation, I only have the option of installing the 'Nvidia Storage Driver', none of the other components are even available to be installed.
View 8 Replies
View Related
Nov 1, 2009
I've done a fresh install of Windows 7 yesterday on my desktop PC and I want to use the virtual PC for some USB hardware that doesn't have any x64 drivers.
I can choose the USB devices fine in the virtual machine, they are detected and XP starts the usual hardware install wizard.
However one of my devices gets the yellow exclamation mark in the device manager with a code 10 (device cannot start).
The virtual machine runs XP SP3, my laptop runs XP SP3 as well and there is no problem on there with this hardware. This leads me to believe that it might be a windows 7 Vmachine issue that is causing this.
I've tried removing the hardware and installing it again, but that didn't solve the problem.
Any ideas for a possible solution?
View 9 Replies
View Related
Jul 8, 2011
NVIDIA nForce 10/100/1000 Ethernet doesnt work in windows 7 64 bit OS.
View 2 Replies
View Related
Sep 11, 2011
"how to accelelarate nvidia geforce 6150se nforce 430 graphic accelerator ?"
View 1 Replies
View Related
Mar 26, 2011
where can i find it for nForce 410/430 MCP?
View 1 Replies
View Related
Sep 26, 2012
I have a Dell Studio XPS M1330 Laptop, has NVIDIA motherboard. I think ever since I purchased the PC this problem has occurred.Problem: NVIDIA nForce 10/100/1000 Mbps Ethernet card will only detect an ethernet cable when I restart. The minute I unplug it, it will not detect it if I plug it back in. I have searched high and low for a solution but have not been able to find one that works. I have disabled the sleep setting on the device and made sure the computer is not allowed to turn off device to save power.Drivers are updated.
View 2 Replies
View Related
Sep 4, 2012
My aunt just got a used HP Pavillion dv2000. She had someone format it and install a fresh copy of Windows 7 x64. Now she has all generic drivers. I want to at least get her the driver for her video card so she can get Windows Aero Effects, better resolution, adjust the brightness, etc. So what I need is a tested and working driver for:nVidia GeForce 7150/nForce 630m It has to work on an HP Pavillion dv2000 running 64bit Windows 7.
View 1 Replies
View Related
Jan 8, 2013
HP Pavilion dv2000 (nVidia GeForce 7150/nForce 630m) driver?
View 2 Replies
View Related
Oct 10, 2009
C-Media AC97 Audio Device. This device cannot start. (Code 10). Sound hardware on ASUS Mobo will not work after installing Windows 7. Latest drivers installed.
View 9 Replies
View Related
Dec 18, 2011
When I install the Drivers for SoundMax Integrated Digital Audio device, message appears This device cannot start (Code 10).
View 3 Replies
View Related
Jun 12, 2012
I had a problem with the computer after a storm it turns to not have internet. After I checked and saw I could'n connect to internet through the modem with a broadband connection. Than checked Device Manager and there was not a network controller and everything was in order no question marks or yellow rectangles. Than tried to re install windows 7. After I tried to install the realtek driver for me LAN it show up the message The RealTek Network Adapter/Controller was not found.
View 6 Replies
View Related
Jan 8, 2013
I am looking for "network controller and PCI device drivers" for my HP 630 (intel celeron inside) laptop
View 1 Replies
View Related
Oct 7, 2012
I want update software for network controller device for Lab Toshibac660-24f for win 7 32bit
View 1 Replies
View Related
Jan 24, 2013
I am receiving a "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)None of my USB ports are working. I have tried to update driers, and modify the registry, but nothing seems to work. I don't have a way to get the information off my system, as none of the ports work, so I can't reset the machine to factory settings.
View 1 Replies
View Related
Sep 16, 2012
want network controller driver and pci device driver.i have hp,amd laptop and use windows 7 32 bit?
View 1 Replies
View Related
Jun 13, 2012
i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
View 1 Replies
View Related
Oct 23, 2011
i cant install nvidia drivers " this graphics driver could not find compatible graphic hardware", and i can't see my nvidia card on the device manager, and can't get the hardware ID, it looks like my laptop doesn't have this graphic card installed.
my latop is: ASUS - K52JC
2 graphics card, intel shared, and separated nvidia ( 310m cuda - 1GB )
i tried to follow this procedure, Fix Latest nVidia Mobility Driver to Fit Your Notebook
but couldn't find device ID, because it is not listed on device manager
View 6 Replies
View Related
Nov 19, 2012
I got a new hard drive for my HP Pavilion DV6T-6000. Installed windows 7 ultimate and a bunch of drivers from HP's drivers section for my computer and I still have this unkown device. It wasn't there on my old drive so something isn't right here.
Location: on Microsoft ACPI-Compliant System
Status: The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. Hardware ID:ACPIHPQ0004
View 9 Replies
View Related
Jun 18, 2012
My Toshiba Satillite L655-s5153 Laptop doesn't reconize the ethernet port when I plug in my wireless router to the ehternet port. How can this be fixed? I have no internet connection.
View 1 Replies
View Related
Sep 1, 2011
I installed windows 7 ultimate on my dell xps15, but can not connect to my wireless network and cannot connect to the internet through an Ethernet cable, i looked around in my devices and noticed these had a yellow exclamation point next to them:[CODE]ecause of this i am not able to use usb drives or connect to the internet in any way on that computer, i dont know what i need to get this fixed and since i cant connect to the internet i sadly cant just update them like i would like to
View 7 Replies
View Related
