Windows Failed To Load Because Firmware Is Not ACPI Compatible
Jul 20, 2009
I had installed Seven on my Dell Dimension 4400 everything was all right and I was working successfully with that operating system but I had to upgrade my BIOS and after that it shows me error when I try to start system: 0xc0000225 (Windows failed to load because the firmware [bios] is not ACPI compatible). The same when I want to re-install Seven.. "Windows is loading files" and then I can see the menu when the problem is presented that I should choose repair system etc.. but it always ends with the same effect.I can do nothing.As I wrote above I wanted to upgrade bios but I stayed with the same version because of many reasons so I made upgrade but nothing has really changed. What's more, I'm sure that Seven may work on my machine - I used it!There's a map of my Bios: Documentation Shall you check what should I change?
View 9 Replies
ADVERTISEMENT
Dec 12, 2010
I'm trying to install Windows 7 on a Compaq Presario 2100 laptop with 1GB of RAM and known good HDD. I ran memtest 86 for 12 hours with no errors.The BIOS sucks and has no options for ACPI, power management, or even serial/parallel port addressing, only boot order, system info, and password. The only device option in the BIOS besides video memory (tried every setting there) is legacy usb support (tried that too). I've been googling for 2 hours about this and found the whole F5 and F7 thing for XP, but I'm not sure if there's a similar option in 7 to only use Standard HAL. There's no Press F6 prompt in 7 install to press F7 at.
View 1 Replies
View Related
Sep 13, 2009
I just burnt my Windows 7 install .iso to a DVD and rebooted my computer ready for the installation. I wait for the windows files to load, then when the bar is full, the screen goes to a blue screen with this message:
"...The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.
Technical information:
*** STOP: 0x0000000A5 (0x0000000000001000, 0x0000000000000000, 0x00000000FFFFFFFF, 0x0000000000002040)"
Please help me sort this out, I have a fairly new computer that has been running XP SP3 without error thus far, and I am very keen to make the leap to Windows 7.
View 9 Replies
View Related
Jun 14, 2012
Just received a new OCZ Agility 3 SSD and are having some issues. I've installed the drive and formatted it, I have also tried to update to firmware on it countless times all of which have resulted in 'Firmware Download Failed'. The drives also seems to be disappearing occasionally and requires a restart before it appears again. I want to update the firmware before I clone my old HDD to it.
View 1 Replies
View Related
Apr 3, 2011
trying to load lexmark x83 but need 64-bit compatible version running windows 7
View 2 Replies
View Related
Jan 23, 2011
statement of windows failed to load because a critical system driver is missing or corrupt. It said for me to insert disk, or contact administrator however, I have no disk
View 3 Replies
View Related
Jan 17, 2011
I want to install Windows 7 to a UEFI-compatible netbook that only has a SD Card slot and a single USB Port (the netbook I'm refering to is the CR-48 if anyone is curious)I know this computer supports UEFI (I was able to start the Fedora 14 EFI and Windows 7 x64 EFI installers) but my assumption is that EFI-based OS installs require you to have the disc inserted (both installers failed to actually load).
View 2 Replies
View Related
Jan 26, 2012
I have recently setup a raid 0+1 array on a computer with 4 identical hard drives. I installed windows 7 and the installation without a hitch. However on the reboot a windows error message appears and says the following:
File: \Windows\system32\ntoskrnl.exe
Status: 0xc0000221
Info: Windows failed to load because the kernel is missing, or corrupt.
I have tried many things in an attempt to resolve this issue. I have tried reinstalling, using a different DVD drive and removing the RAID array to no avail. I have also disconnected the hard drive which is not associated with the RAID array also to no avail.
View 4 Replies
View Related
Oct 29, 2011
I turned on my pc, and it would not let me get past start up, saying
file : Windowssystem32
tkrnlpa.exe
status : 0xc00000e9 Info:
Windows failed to load because the kernel is missing or corrupt
I tried a few things, mostly the startup repair option that it would (recommend) to me next to the start windows normally option. this did absolutely nothing, and the problem continued. So I said ok, I give up, and decided to back up everything and completely reformat and reinstall windows. I did this, it installed successfully. I couldn't believe it...even after completely reformatting, I could not get past start up. The system repair option still does nothing, even with the disc in and I tried reinstalling it a bunch of times, but now it wont even do that correct all the way through, keeps coming up with errors talking about files either missing or corrupt. I wiped partitions and tried again alot of times, but nothing. Now it doesnt even recognize windows 7 as being installed at all. [URL]
View 4 Replies
View Related
Apr 28, 2012
Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space. Got "Page Failed to Load" error attempting to change my Windows 7-64bit display resolution. This used to work, but no more ( don't know what might have caused it). I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.
View 2 Replies
View Related
Jan 21, 2012
installing Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
I have no other OS on the virtual machine.
View 2 Replies
View Related
Nov 27, 2011
Been noticing issues with this for a while, was wondering if there is a fix
View 6 Replies
View Related
Jun 28, 2012
First of all. I was playing gmod successfully yesterday, today i downloaded some things into my gmod, i tried to play it.and it Gave me this: Failed to load launcher DLL, my brother gave me advice and he said: ''You should delete all the files and reinstall gmod on steam'' I tried, but.. it still gave me the same error, no diffrences.And yes, i am a girl, i know girls can be professional technics but im not the master of that so dont ask me to do
View 1 Replies
View Related
Feb 14, 2012
Today I started windows with it's default settings and randomly crashed at logon screen,it says that user account service service failed to load,I tryed to restart but same problem.I don't have another account so I can only log with safe mode
View 1 Replies
View Related
Dec 8, 2012
Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:
The driver DriverWUDFRd failed to load for the device WpdBusEnumRootUMB2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)
It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.
Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.From checking forums and searching I have found a few others with this issue and a few articles on its cause, WUDFRd failed to load for the device, Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2
I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!
View 7 Replies
View Related
Dec 19, 2009
tracking down and getting rid of things that cause error to appear in event log. one of the few left is the rx filter failed to load issue. seems to be due to roxio program somehow and perhaps related to 32/64 bit issues. suggestions or ignore?
View 1 Replies
View Related
Aug 29, 2012
by accident my power source for my computer shut off so i rebooted my computer. then it started to pop up setupapi.dll is missing and failed to load powrprof.dll. now i can't run majority of my programs nor can i watch videos on Internet.
View 2 Replies
View Related
Dec 16, 2012
Every time I boot up I get an error message that says, 'failed to load branding configuration'...what can I do
View 2 Replies
View Related
May 22, 2011
im having a problem with my asus eee pc 1201n with a running wind7 x32 bit.I had to reinstall it due some technical issues and the most things run pretty smoothly. The only problem Im having is, I can use my fn keys to change volume and stuff. So I searched for the driver I needed and tried to install it, but I failed.I tried it with admin modus, other windows version but it just wont work.
View 8 Replies
View Related
Apr 30, 2012
Acpi sny5001 driver for windows 7?
View 1 Replies
View Related
Aug 19, 2010
Just got a new laptop (well second hand) and it is supposed to be ACPI compliant. I cant install windows7 as it says it isn't ACPI compliant on the bios, i cant find anything in the Bios to enable it. It comes up with saying the Bios is not ACPI compatable, i have tried looking in the bios but i cannot find anything.When XP is installing, you can press F5 to select ACPI but i cant, just STANDARD PC.
View 1 Replies
View Related
May 21, 2011
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies
View Related
Feb 15, 2012
about an hour ago my screen froze and the computer became unresponsive. I found it a bit wierd that it turned off as soon as I pressed the power button as normally it takes about 5 seconds to do this. Upon rebooting (and going through the 'start windows normally' thing I got a BSOD saying something along the lines of:'the bios in this system is not fully acpi compliant windows 7'anyway I googled this and fiddled around in BIOS a bit discovering that my 'acpi 2.0 support' option wasn't enabled so I've changed this. Also some people seemed to suggest removing each RAM module individually and testing each one etc so I did this also to the same effect. After putting them both back in I no longer got the above error message but this one:'a problem has been detected:memory_management...etc'Rebooted again and the BSOD I now encounter and have ever since says:
IRQL_NOT_LESS_OR_EQUAL
.
.
.
***STOP: 0x0000000A...
I've since tried booting safe mode, debugging mode etc but each time I do this the computer just reboots and takes me back to the 'do you want to start windows normally or start windows repair' screen. The second option ends up with either a non responsive black screen that can only be escaped by powering off or the above (last) mentioned blue screen.It might be worth noting; as my research suggests this is something to do with software drivers, that windows did a fairly massive update last night. Although I was able to run my computer for a few hours playing games/internet until this happened. Also in the past couple of months I have upgraded the RAM and GPU but the computer seemed to run fine with these for the weeks since.
View 1 Replies
View Related
Mar 7, 2012
Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
View 1 Replies
View Related
May 8, 2012
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies
View Related
Oct 3, 2012
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
View 3 Replies
View Related
Jul 16, 2011
this dvd rom won't burn... my brother said the firmware should be update since it is in windows 7 os... where do I get it?
View 1 Replies
View Related
Sep 14, 2009
im having an issue installing windows 7.
This computer is not compliant with the Advanced Configuration and Power Interface (ACPI) standard. Windows must be installed onto a computer that supports ACPI. Contact your computer manufacturer for a BIOS update or install Windows on an ACPI-compliant computer.
im using an updated evga 780i sli mobo with the newest bios i check the bios and acpi is on... any help would be great..
View 5 Replies
View Related
May 6, 2012
I need a firmware parser driver (i guess its other name is human computer interface if im not wrong). Specs are as under
SONY VAIO VGN-FZ11Z
Windows 7 PRO 32bit
View 3 Replies
View Related
Nov 30, 2012
I wanted to install more RAM, but Supermicro support told me I needed to update BIOS (flash it) to enable it to accept higher RAM.After I did this, the BIOS seems to have lost the record that boots my Windows 7 installation. After going through the checks, it just comes up with "Operating System not found."So I thought that, since I have two SATA drives, I could try installing Windows on my redundant disk to see if that might generate a dual boot menu.I was able to successfully install a fresh copy of Windows on the 2nd disk, but it will only boot into that one. It seems my system has completely forgotten about my other, working, installation.Is there a process for recovering the boot information and setting it up such that I can go back to using my other installation?
View 2 Replies
View Related
Mar 24, 2012
For about 5 weeks my pc would not boot up properly and i eventually discovered that one of my ram chips was faulty so i replaced it and now works only upto 3 gig with windows 64 bit but when i install the 4th chip i get a Bsod with the message this bios is not Acpi compliant so i went to the motherboard website and updated the bios but i still get the same message,
View 6 Replies
View Related
