im having a problem with my asus eee pc 1201n with a running wind7 x32 bit.I had to reinstall it due some technical issues and the most things run pretty smoothly. The only problem Im having is, I can use my fn keys to change volume and stuff. So I searched for the driver I needed and tried to install it, but I failed.I tried it with admin modus, other windows version but it just wont work.
View 8 RepliesAcpi sny5001 driver for windows 7?
View 1 Replies View RelatedI have an ASUS K50IE laptop that i had for 2 years now. been working fine until 2 days ago.this problem has been bugging me for the last 2 days. here's why.my laptop suddenly didn't detect my battery. thought it was because my battery was dead. I searched the net on things to do before "throwing in the towel" on my battery and today i came across a blog where the instruction was to uninstall the Microsoft ACPI compliant control method battery driver. I did just that and my battery suddenly worked! well sort of. now here's where it gets all weird.every time i open my laptop i do the following:1. plug in AC to laptop.. turn on laptop.3. unplug AC.3. laptop runs on battery.4. log on to windows.5. battery icon shows up as an empty charging icon then shows the "Battery is not detected" icon again.please take note that my laptop is still ON and WORKING. so this means (MAYBE?) that my battery is working.
View 3 Replies View RelatedI'm running windows 7 professional 64 and I keep encountering at random times an error in the event log that causes my computer to lockup. This lockup comes in the form of a slow lack of access to programs and no luck at rebooting via restart or CTRL ALT DEL.
View 0 Replies View Relatedi have install windows 7 and i have the unknown device; the keys for lighting don't work. please i need this driver for my vgn-cs325j
View 1 Replies View Relatedmy computer is showing "MISSING ASUS ACPI DRIVER" on my computer screen. and i am not finding asus ACPI Driver to download.
View 1 Replies View RelatedJust got a new laptop (well second hand) and it is supposed to be ACPI compliant. I cant install windows7 as it says it isn't ACPI compliant on the bios, i cant find anything in the Bios to enable it. It comes up with saying the Bios is not ACPI compatable, i have tried looking in the bios but i cannot find anything.When XP is installing, you can press F5 to select ACPI but i cant, just STANDARD PC.
View 1 Replies View Related about an hour ago my screen froze and the computer became unresponsive. I found it a bit wierd that it turned off as soon as I pressed the power button as normally it takes about 5 seconds to do this. Upon rebooting (and going through the 'start windows normally' thing I got a BSOD saying something along the lines of:'the bios in this system is not fully acpi compliant windows 7'anyway I googled this and fiddled around in BIOS a bit discovering that my 'acpi 2.0 support' option wasn't enabled so I've changed this. Also some people seemed to suggest removing each RAM module individually and testing each one etc so I did this also to the same effect. After putting them both back in I no longer got the above error message but this one:'a problem has been detected:memory_management...etc'Rebooted again and the BSOD I now encounter and have ever since says:
IRQL_NOT_LESS_OR_EQUAL
.
.
.
***STOP: 0x0000000A...
I've since tried booting safe mode, debugging mode etc but each time I do this the computer just reboots and takes me back to the 'do you want to start windows normally or start windows repair' screen. The second option ends up with either a non responsive black screen that can only be escaped by powering off or the above (last) mentioned blue screen.It might be worth noting; as my research suggests this is something to do with software drivers, that windows did a fairly massive update last night. Although I was able to run my computer for a few hours playing games/internet until this happened. Also in the past couple of months I have upgraded the RAM and GPU but the computer seemed to run fine with these for the weeks since.
I'm trying to install Windows 7 on a Compaq Presario 2100 laptop with 1GB of RAM and known good HDD. I ran memtest 86 for 12 hours with no errors.The BIOS sucks and has no options for ACPI, power management, or even serial/parallel port addressing, only boot order, system info, and password. The only device option in the BIOS besides video memory (tried every setting there) is legacy usb support (tried that too). I've been googling for 2 hours about this and found the whole F5 and F7 thing for XP, but I'm not sure if there's a similar option in 7 to only use Standard HAL. There's no Press F6 prompt in 7 install to press F7 at.
View 1 Replies View RelatedI had installed Seven on my Dell Dimension 4400 everything was all right and I was working successfully with that operating system but I had to upgrade my BIOS and after that it shows me error when I try to start system: 0xc0000225 (Windows failed to load because the firmware [bios] is not ACPI compatible). The same when I want to re-install Seven.. "Windows is loading files" and then I can see the menu when the problem is presented that I should choose repair system etc.. but it always ends with the same effect.I can do nothing.As I wrote above I wanted to upgrade bios but I stayed with the same version because of many reasons so I made upgrade but nothing has really changed. What's more, I'm sure that Seven may work on my machine - I used it!There's a map of my Bios: Documentation Shall you check what should I change?
View 9 Replies View Relatedim having an issue installing windows 7.
This computer is not compliant with the Advanced Configuration and Power Interface (ACPI) standard. Windows must be installed onto a computer that supports ACPI. Contact your computer manufacturer for a BIOS update or install Windows on an ACPI-compliant computer.
im using an updated evga 780i sli mobo with the newest bios i check the bios and acpi is on... any help would be great..
For about 5 weeks my pc would not boot up properly and i eventually discovered that one of my ram chips was faulty so i replaced it and now works only upto 3 gig with windows 64 bit but when i install the 4th chip i get a Bsod with the message this bios is not Acpi compliant so i went to the motherboard website and updated the bios but i still get the same message,
View 6 Replies View Relatedwhat is ACPI BIOS linkage
View 1 Replies View RelatedI just burnt my Windows 7 install .iso to a DVD and rebooted my computer ready for the installation. I wait for the windows files to load, then when the bar is full, the screen goes to a blue screen with this message:
"...The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.
Technical information:
*** STOP: 0x0000000A5 (0x0000000000001000, 0x0000000000000000, 0x00000000FFFFFFFF, 0x0000000000002040)"
Please help me sort this out, I have a fairly new computer that has been running XP SP3 without error thus far, and I am very keen to make the leap to Windows 7.
I am receiving a stop 7e error on install of windows 7 x64 on a new build pc.
View 9 Replies View RelatedI have a modified Hp vp17 desktop, that has had an upgrade rebuild including replacing the motherboard etc.I am not very good at explaining the system info. but here goes;The CPU is an Intel Core 2 Quad Q9450 @ 2.66 GHz.The OS is Windows 7- 32 bit.RAM is 3.00GB.I am currently using a Wireless Logitec S520 keyboard and mouse however the key labelling is coming off, which doesn't help other members of my family who are not touch typing familiar.I am looking to replace the Logitech keyboard and mouse to a compatible HP Wireless keyboard and mouse or Microsoft Wireless keyboard and mouse combo but don't really know what to look for?
View 2 Replies View RelatedHow to fix the DVD driver not working after installation Windows 7 64x?
View 3 Replies View RelatedMy cd/dvd player is not working and under the device manager it says the driver is disabled.. I couldn't do system restore because it was disabled I couldnt do driver roll back that was disabled. Apparently I cannot get into bios as it was blocked and I dont have any cds for it ( the player dont work anyways..
View 9 Replies View Relatedi had downloaded a windows 7(32-bit) driver for my hp deskjet D1360 from a website called siliconguide. after the completion of the download,when i try to double-click on its exe file saved on the desktop to open it,a command prompt screen appears for a second and disappears. i just cant understand what the problem is.
View 3 Replies View RelatedWhen I will do windows 7 install then audio driver is not working.
View 1 Replies View RelatedThe sound is choppy most of the time.
View 1 Replies View Relatedprinter driver not working for HP laserjet 6P in windows 7 64bit?
View 2 Replies View RelatedPlease let me know which sound driver should i use for Window 7 ultimate 64 bit.
View 2 Replies View RelatedI installed windows 7 32bit on Dell Precision Workstation 450; but my Nvidia Geforce 6200 is given code 43.
View 1 Replies View RelatedI read a few forums about this issue but mine's different. It doesn't crash or display any error while gaming. It happens when i'm on the desktop exploring. If don't do anything it wont display the error, however, when i start to right click on desktop, it flickers and displays the error "Nvidia Windows Kernel Driver mode driver has stopped responding and recovered" something link that. This also happens when a window is active like when i'm on the Control Panel Window (don't know with other windows, haven't tried yet), It flickers every 10 - 30 secs and display the error. After a few hours of researching and troubleshooting i think finally fixed it by putting the "Peformance Settings to Best Performance". I don't know what caused this. It didnt happen to me before. My Peformance settings was always set to Best appearance until now. Anyone knows the fix to this error? I don't like the appearance set to Best Peformance, it looks like Windows 98 If you experience similar errors like mine, try setting your Performance settings to Best Peformance and post comments here if it works[CODE]
View 2 Replies View RelatedI just purchased a "refurbished" Dell Optiplex GX 620. When I turned it on everything worked fine until it rebooted after an automatic Microsoft update was installed. Now I have no sounds. According to the Device Manager "Your sound card is not working properly because a compatible driver is not available for this version of Windows." (I'm running Win7). My sound card is a SoundMAX Integrated Digital Audio. I have tried several SoundMAX drivers (found online) that said they were compatible but they don't work either.
View 2 Replies View Relatedmy cd/dvd driver is not working how do i get the software?
View 1 Replies View RelatedI don’t know if this will be of help to anyone, or if this has been posted already, I couldn’t find it here on this forum.
ATI Catalyst 9.1 Vista driver 32 or 64bit should work with an X1950, the 64bit worked for me and I have seen on another site that the 32bit is working also.
Since making this post others have pointed out that the 9.2 and 9.3 drivers should also work in Win 7, follow this thread for links to the drivers.
It should also be pointed out that this thread was for the X1950 PCIE cards and not AGP
I installed 7 on a Dell Dimension 4600 1 GB Memory, ATI Video card, onboard sound. Everything seems to run fine but my audio. I had to install the latest AC97 drivers that just came out to get rid of the exclamation point in Device manager. When I click on the speaker icon or go to properties it shows sound is going through but nothing comes out the speakers. I have a second HD with XP and the sound works fine so I know my hardware is OK. Any suggestions to get my sound working?
View 3 Replies View Relatedmy dvd driver stopped working
View 1 Replies View Relatedmy dell dvd/cd driver is not working ..it cant read any cd/dvd.
View 1 Replies View Related