Computer Is Showing "MISSING ASUS ACPI DRIVER"
Feb 25, 2012my computer is showing "MISSING ASUS ACPI DRIVER" on my computer screen. and i am not finding asus ACPI Driver to download.
View 1 Repliesmy computer is showing "MISSING ASUS ACPI DRIVER" on my computer screen. and i am not finding asus ACPI Driver to download.
View 1 RepliesHow to repair missing operating system in asus laptop computer
View 5 Replies View Relatedim having a problem with my asus eee pc 1201n with a running wind7 x32 bit.I had to reinstall it due some technical issues and the most things run pretty smoothly. The only problem Im having is, I can use my fn keys to change volume and stuff. So I searched for the driver I needed and tried to install it, but I failed.I tried it with admin modus, other windows version but it just wont work.
View 8 Replies View RelatedI'm running windows 7 professional 64 and I keep encountering at random times an error in the event log that causes my computer to lockup. This lockup comes in the form of a slow lack of access to programs and no luck at rebooting via restart or CTRL ALT DEL.
View 0 Replies View RelatedAcpi sny5001 driver for windows 7?
View 1 Replies View Relatedi have install windows 7 and i have the unknown device; the keys for lighting don't work. please i need this driver for my vgn-cs325j
View 1 Replies View RelatedI recently purchased an ASUS G53SW-XN1 with Windows 7 64-bit OS from newegg and found out that the built-in webcam doesn't work. Upon further investigation I also found that there is no "Imaging device" listed in "Device Manager" yet the physical device is obviously there. I went to the ASUS support site to attain the driver for the webcam only to find that, for this model, there is no driver listed. I called ASUS about this and their tech was as surprised as I was over the lack of a driver for this model. He directed me to try the driver for similar models (G53JW, G73JH, and G73SW) but none of their drivers would work, and the G73SW model, as with my model (G53SW), didn't have a driver listed either.
View 16 Replies View RelatedI just purchased an ASUS all in one pc and on FIRST startup it said "Boot mngr is missing - press ctrl alt delete to restart." I called customer service to fix problem. It is fixed now.
View 1 Replies View RelatedI've recently formatted my hard-drive on my desktop and reverted to Windows 7 from 8, for many reasons, but upon installation I was unable to connect to the internet through a wired connection. I checked 'Device Manager' and discovered that the Ethernet Controller, PCI Simple Communications Controller and SM Bus Controller were all missing. Naturally, I went to [URL] and checked for a 64 bit Windows 7 Ethernet Driver, as it was the most important of the missing drivers; and downloaded a Realtek Ethernet Utility V2.0.2.1. I ran the Asus Setup in the folder, and the Utility installed. Having essentially no idea what I was doing, I went back and tried to manually find the drivers, thinking they may have been in the 'WIN7' folder of the .zip I downloaded. With no luck, I uninstalled the old drivers entirely from Device Manager, and restarted to see if Windows would install it correctly.
View 2 Replies View RelatedBecause the computer got a virus, we had to completely format and re-install windows 7 on our asus A53E laptop unfortunately it's not without some problems, namely 4 drivers:"pci simple communications controller" "SM bus controller" "network controller" "ethernet controller"..The driver software installation says 'no driver found' And it cannot connect to the internet, so it can't even search for them online
View 2 Replies View RelatedSome picts in my library have gone missing, sort of. One of the folders holds 11 subfolders and the picts in these don't show. The folders show 0 bytes. If I open Kodak Easyshare these picts show for a split second so I know they are somewhere. What can I do to restore them to the original location?
View 1 Replies View Relatedim having an issue installing windows 7.
This computer is not compliant with the Advanced Configuration and Power Interface (ACPI) standard. Windows must be installed onto a computer that supports ACPI. Contact your computer manufacturer for a BIOS update or install Windows on an ACPI-compliant computer.
im using an updated evga 780i sli mobo with the newest bios i check the bios and acpi is on... any help would be great..
For about 5 weeks my pc would not boot up properly and i eventually discovered that one of my ram chips was faulty so i replaced it and now works only upto 3 gig with windows 64 bit but when i install the 4th chip i get a Bsod with the message this bios is not Acpi compliant so i went to the motherboard website and updated the bios but i still get the same message,
View 6 Replies View Relatedwhat is ACPI BIOS linkage
View 1 Replies View RelatedI just burnt my Windows 7 install .iso to a DVD and rebooted my computer ready for the installation. I wait for the windows files to load, then when the bar is full, the screen goes to a blue screen with this message:
"...The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.
Technical information:
*** STOP: 0x0000000A5 (0x0000000000001000, 0x0000000000000000, 0x00000000FFFFFFFF, 0x0000000000002040)"
Please help me sort this out, I have a fairly new computer that has been running XP SP3 without error thus far, and I am very keen to make the leap to Windows 7.
Just got a new laptop (well second hand) and it is supposed to be ACPI compliant. I cant install windows7 as it says it isn't ACPI compliant on the bios, i cant find anything in the Bios to enable it. It comes up with saying the Bios is not ACPI compatable, i have tried looking in the bios but i cannot find anything.When XP is installing, you can press F5 to select ACPI but i cant, just STANDARD PC.
View 1 Replies View RelatedI am receiving a stop 7e error on install of windows 7 x64 on a new build pc.
View 9 Replies View Related about an hour ago my screen froze and the computer became unresponsive. I found it a bit wierd that it turned off as soon as I pressed the power button as normally it takes about 5 seconds to do this. Upon rebooting (and going through the 'start windows normally' thing I got a BSOD saying something along the lines of:'the bios in this system is not fully acpi compliant windows 7'anyway I googled this and fiddled around in BIOS a bit discovering that my 'acpi 2.0 support' option wasn't enabled so I've changed this. Also some people seemed to suggest removing each RAM module individually and testing each one etc so I did this also to the same effect. After putting them both back in I no longer got the above error message but this one:'a problem has been detected:memory_management...etc'Rebooted again and the BSOD I now encounter and have ever since says:
IRQL_NOT_LESS_OR_EQUAL
.
.
.
***STOP: 0x0000000A...
I've since tried booting safe mode, debugging mode etc but each time I do this the computer just reboots and takes me back to the 'do you want to start windows normally or start windows repair' screen. The second option ends up with either a non responsive black screen that can only be escaped by powering off or the above (last) mentioned blue screen.It might be worth noting; as my research suggests this is something to do with software drivers, that windows did a fairly massive update last night. Although I was able to run my computer for a few hours playing games/internet until this happened. Also in the past couple of months I have upgraded the RAM and GPU but the computer seemed to run fine with these for the weeks since.
I'm trying to install Windows 7 on a Compaq Presario 2100 laptop with 1GB of RAM and known good HDD. I ran memtest 86 for 12 hours with no errors.The BIOS sucks and has no options for ACPI, power management, or even serial/parallel port addressing, only boot order, system info, and password. The only device option in the BIOS besides video memory (tried every setting there) is legacy usb support (tried that too). I've been googling for 2 hours about this and found the whole F5 and F7 thing for XP, but I'm not sure if there's a similar option in 7 to only use Standard HAL. There's no Press F6 prompt in 7 install to press F7 at.
View 1 Replies View RelatedI had installed Seven on my Dell Dimension 4400 everything was all right and I was working successfully with that operating system but I had to upgrade my BIOS and after that it shows me error when I try to start system: 0xc0000225 (Windows failed to load because the firmware [bios] is not ACPI compatible). The same when I want to re-install Seven.. "Windows is loading files" and then I can see the menu when the problem is presented that I should choose repair system etc.. but it always ends with the same effect.I can do nothing.As I wrote above I wanted to upgrade bios but I stayed with the same version because of many reasons so I made upgrade but nothing has really changed. What's more, I'm sure that Seven may work on my machine - I used it!There's a map of my Bios: Documentation Shall you check what should I change?
View 9 Replies View Relatedi work on Dell, Windows 7, 64 bit. i use to work with my HDD perfectly until once my computer booted but my HDD did not show up... when i feel it i can see that it is working but the light isnt even on?i tryed pluging it in to other computers it worked fine but it just does not work on my computer?
View 9 Replies View RelatedI have a modified Hp vp17 desktop, that has had an upgrade rebuild including replacing the motherboard etc.I am not very good at explaining the system info. but here goes;The CPU is an Intel Core 2 Quad Q9450 @ 2.66 GHz.The OS is Windows 7- 32 bit.RAM is 3.00GB.I am currently using a Wireless Logitec S520 keyboard and mouse however the key labelling is coming off, which doesn't help other members of my family who are not touch typing familiar.I am looking to replace the Logitech keyboard and mouse to a compatible HP Wireless keyboard and mouse or Microsoft Wireless keyboard and mouse combo but don't really know what to look for?
View 2 Replies View Relatedso i came home from work and my pc was showing on the screen "BOOTMGR is missing" to restart pres ctrl+alt+delete. i have no idea what to do. i have beenrunning an ocz agility 3 60gb ssd as my boot drive for about 3 weeks and it has been working flawlessly. nothing in the system has changed.
View 3 Replies View Relatedi cant sign on to my asus computer - just locks up on sign on?
View 1 Replies View Relatedi have a verbatim 1tb hardrive have followed the set up guide, and windows is recongnising the hardrive but not showing on 'my computer'?
View 10 Replies View RelatedIn Windows 7 Explorer, the Computer icon is not showing in the left pane--neither in the default view or the 'show all folders' view.
You can see from the screen captures that I have Explorer set to open to Computer, but no Computer in left pane, and no drives are accessible directly through Explorer.
The drives are fine (from using alternate Explorer alternatives).
How can I get the Computer icon back in the left pane?
I'm new to Windows 7 (Ultimate) and like to have a machine that runs nice and fast with no unessential items running in the background. Last night I did a bit of tweaking (mostly in gpedit.msc) and went a step too far, but I'm not sure which step I need to undo and haven't been able to find a solution in a 4 hour google session.When I click on My Computer, the cupboard is bare.I have a 500gb drive partitioned into C: and D: and a DVD drive E:The right pane is empty, and when I plug in a USB drive it doesn't show either. When I click on libraries, I can manually enter C: or D: in the address bar but it's a bit inconvenient. I usually use Total Commander rather than Windows explorer, but it's been difficult to set up my downloads location etc as they don't appear in the available options. In device manager the disk is showing.
View 6 Replies View RelatedSomeone else computer is showing up under Networks on my computer. Must be someone who lives in this building. How do I keep this from showing up and if her's shows up on mine, does mine show up on hers?
View 7 Replies View RelatedI am using Windows 7 enterprise modified like windows 8 and my CD ROM DRIVE is not showing up in my computer. My cd boots when starting up but not showing on my computer. I have went into cmd prompt > regedit > HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > Class > {4D36E965-E325-11CE-BFC1-08002BE10318}(CD ROM CLASS) and there was no uperclass filter or lowerclass filter available so I could delete them.I will be really happy if you could tell me anything else I could try to get my CD ROM DRIVE back.
View 4 Replies View Relatedmy dvd drive is not showing on my computer,i have inserted a pd full of viruses nad my pc doesn't have any anti-virus...
View 7 Replies View RelatedI was format my pc but after this the all iso files are not showing in iso format i have window 7
View 2 Replies View Related