I have the Creative XF-i Extreme Audio soundcard on my system and since upgrading to Windows 7, I am missing the THX console and also the Creative Volume Panel applications. I have used my original Creative CD and installed the drivers and software etc from that in hoping to be able to extract just them components but I can't and they don't seem to be there and I have looked through all folders etc. Obviously being the very original CD that first shipped with PC the drivers and applications are out of date so Creative Auto Update takes care of that. However, what it does not do is find nor install those said applications. I am disappointed that they are not included and when running a new auto update scan it finds no new updates and says I have the latest available software. I have even been on the Creative website and when I do eventually find my soundcard, the updates etc do not show anything to do with the THX console. Basically, it was an interface that let you adjust bass gain and boost and let you physically adjust sliders and effects to suit. Nice feature and I have it in XP, just not win 7
a few days ago i've installed Windows 7 64-bit(ultimate),everything seems to be going well except for the sound card -.-, I go on the creative site and download the drivers for 64 bit windows seven, but when it comes to the end of the installation gives me a message saying the device is not supported as well if I try to open the audio console same message, I tried the modified drivers and the problem seemed to be resolved, but it is not the same as the original drivers, does anyone know how to fix?
Today i on my laptop ( asus vx 6 ) and i got an error say " Bootmgr is missing "i load up my CD and went into recovery option, and my OS was never listed over there.
System has been blessed with a new lease of life. Faster, more responsive and my god Windows 7 looks sexy! Now, if there is a tiny niggle of an issue, then it is why I am posting today. I have the Creative Xtreme Audio soundcard on my system and Windows 7 has updated it to all the latest drivers. Sound seems ok and thus far it is not reporting any problems. I have the Creative Media Organiser and all the other mod cons etc etc. However, where has my Volume Panel interface gone? In Win XP, I had it permanently attached to my task bar. Basically, a little volume icon if you like in bottom right corner with everything else. You right click the icon and then you get the entertainment console where you can change settings etc. Looked nice, even in XP. I must admit I'm a tad disappointed it's not here in Windows 7 and also confused as to why everything else is here except that facility.Do I have to download it separately? I don't fancy putting my original CD in that came with PC from day one as I'd have to manually look for that particular component and extract it. Infact, I don't even know if that is an option as I am pretty sure it formed part of the whole "Medisource Go" package and I have that and it's up to date.
It seems to me that XP's recovery console is somewhat better than the one that comes with Vista or 7, unless someone can point me in the right direction for finding further documentation on this topic.
The main difference is the lack of ability to tinker with services (LISTSVC / ENABLE / DISABLE commands). A missed opportunity is the lack of registry tweaking, considering that REGEDIT can be run, but I think it only allows you to look at the registry for the recovery console rather than the main Windows installation, which doesn't help much (though I haven't tried to import/mount the registry file from the main Windows installation).
I have a user where she had setup up a reoccurring calendar event and not it's missing from her own outlook calendar. I checked the deleted and changed calendar views to see if i can find the missing appointment but I don't see it anywhere. Any way to get the missing appointment back?
I am hosting a minecraft server, and am trying to use a windows scheduled task to start a .bat file that calls on java and shows input on the cmd.exe console. When I manually start the .bat file the console shows, but when I start it with the windows scheduler its hidden. When I start the run.bat with a scheduled task on computer start up. The server will start and function correctly, but I don't know how to open the cmd console to type things in.
i have Windows 7 x64 when i running quake 4 and opening console and typing it shows only square block not words an the fps counter in the right corner only show 1 block not numbers whats wrong?
I've installed Windows 7 Build 7057 on a partition where I previously had Windows XP. I wanted this installation to wipe out the XP, but instead it created a Windows.old folder. I've deleted that folder, but now when the system starts up a black screen with three options shows up:
1. Previous Windows
2. Windows 7
3. Windows Recovery Console
This Recovery Console was installed when I had the XP, I have no idea why it's still there.
I would like to remove any traces of XP and this console so that the system can boot 7 right away.
Also, a tiny thing: for like 2 seconds a black screen with all drives attached shows up, I'd like to remove that one, too.
I'm looking for a good permanent/persistent RDP Remote Desktop setup to the Windows 7 machine I'm mostly using as HTPC and file service. It would be ideal if the setup also included the ability to wake the HTPC from sleep. I would like to RDP with Windows 7/8 'console', plus iPAD and Android handsets/tabs.What's the best application to use for this? the ones I know of offhand all require intervention on both ends, which is not what I'm after. I need more of a server type setup
I got rid of the WildTangent games console that came on my Toshiba computer, however, the games still show up. I have carefully removed registry entries related to it(making a backup of the registry) and they still remain. I have also used Revo Uninstaller Pro and removed what it found.
The Services console I use all the time. To go through and change everything every time is ridiculous including window size. I tried (using the hidden Admin account) choosing Author mode, un-checking the "do not save changes" check box, but the O/S won't allow change the services.msc file. I even tried to rename the file, which did save, but only limited changes were saved. W/O using a 3rd party program (which seems to be the only way anything can get changed with Windows 7), how can something that was easy (by changing the attribute) be remembered??
I need to change a registry setting so i can use my raid drive,which is isastorV or wahtever, to 3 but once im done editting the registry under recovery console in windows 7. (from a repair disk)i noitce, that when i return to recovery console after a reboot, the setting has reverted back to 0 from its change of 3.In other words.Regedit is not saving any changes i make to it (the registry) under recovery console).
i have purchase laptop in which all ready sound blaster &creative console volume launcher are installed but volume launcher i have uninstalled by mistake can i installed again. my system detail dell studio 1558.service tag 7d776bs.
console window host has stopped working, this message always pop up on laptop screen, please help me fixed this problem. im using window 7 ultimate os.
I can't login locally on console when first time I have logged in using remote desktop after restart. When I am in front of the console again, try to login locally system seem to load my desktop but for only a while. It shows only blank screen for a second and logon screen appears again. I can try to logon milion times - always the same. But when first time I have logged on console, after that logged using remote desktop, and then try another time log on using console everything works fine.
My computer is constantly rebooting in the Recovery Console. I chose this option because I was trying to restart in safe mode, but I didnt see that option, so it was basically a mistake. But now that I have done that, I can not get it to boot back up normally. Also, when I try to use option 1 in Recovery, I put my password in and it says its incorrect
I rebooted my computer today and now every time I try and bring it up it goes in to the recovery console and doesn't show that I have an operating system loaded. I have tried everything from safe mode, to last known good config, vga mode, tried repairing errors, and nothing works. I tried System Restore from the Recovery Console options but it kept reading that I must "Select an operating system in order to continue". Obviously, I can't select one if it isn't there to do so. I think my hard drive is going bad from a diagnostic test, so I need to get it booted up just long enough to create a backup so I don't lose years worth of work.
I inadvertently stuffed the setting for "Access this computer from the network" by removing "Everyone" but not adding Authenticated Users before applying and can't login locally or remotely to my PC. For some reason there aren't any restore points either (my other PC with Windows 7 x64 Ultimate has many and I don't remember explicitly disabling or enabling on either PC).
i just want to use the wire less controller wireless no box ,to play need for speed world online racing.how do i sink it to the game and not use key board at all
I have a 2 year old vaio that has i5 and 8 gb of ram. I have windows 7 professional x64. My computer froze while on the Internet, and when I manually shut it down and restarted it, it gave me two options. Start repair console, and start normally. When I started it normally, it froze on the windows logo. I restarted it, and tried recovery console, but it loads, then gives me an arrow with a background of blue and a bird on the right, which is windows 7's background when logging in. But it only shows this.I have tried safe mode, but that freezes on classpnp.sys and I have tried to boot from windows 7 recovery disk. I have also tried windows vista recovery disk. When the windows 7 disk booted, it loads and then asks for my country, but then again shows just a cursor.Blue screen of death error is unmountable boot volume.
I recently bought a maxtor 500 gb external hdd and i just cant get it to work with windows 7, i got a computer at home where i want to keep it that has windows 7 rc , I have tryed everything i can think of to make it work but nothing does, I cant see it in my computer or with the explorer, but I can see it with computer management, It doesn´t have a drive letter or NTFS and I just cant do anything to it, I cant format it then I get the error "An unexpected error has occured. check the system event log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer".Nothing works, I cant put a drive letter to it then i get the error "The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by using the refresh task. If the problem persists close the Disk Management console then restart Disk Management or restart the computer."Now im getting pretty annoyed with trying different things on it but can´t seem to make it work, now on the other hand it does work on my laptop computer wich has Windows vista, and it works fine, also works on another computer I have that has Windows XP, can anyone please help me with this problem I would prefer to not have to format it since I did put alot of data on it from my other computers but if I have to then so be it .
I accidentally deleted some important files/folders which caused the whole downloaded videos/games get lost in a few minutes,i didnt even notice that it was deleting.I tried system restore but it didnt work,is there any other way to get your systems time back up for 2-3 days back?
Very recently I started having a problem with the remote desktop where it says the following message:
"Your computer could not connect to another console session on the remote computer because you already have a console session in progress."
What I am trying to do is to access my Vista Ultimate computer using my Windows 7 Ultimate computer, and have been doing so this way for more than a year.All of a sudden I start getting the message that I have quoted. I do not know why it started doing that.As well, going in the Users tab of task manager you can see there that I am logged in as a console user.