Toshiba laptop hangs at pick user screen when booting normally. Tried creating new user acct, same result. Boots up in safe mode. Re-seated memory sticks, hard drive, no change. Tried updating drivers too. AV scan finds nothing.
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
I bought the bleeping Dell Inspiron 560, was to rapidly tap F8 during startup to bring up the "Advanced Boot Options." I saw the guy at Best Buy do it but it did not work on my machine when I got home. I'm using Windows 7 Home Premium. The computer came without a manual or any disks.
I have a laptop with broken lcd. So im using it now as desktop, connecting it to an external lcd monitor.Last night I suspected a worm and tried to boot up in safe mode by pressing F8 but couldn't make it work because windows only activate the external monitor by the time it has finished loading drivers. The result was it keeps booting into normal mode.So, I remembered there's another way to boot into safe mode by accessing boot options in msconfig...Now I'm stuck with safemode and cannot do anything because safemode doesnt enable external monitor. I know for sure that I could enter password and get into safemode but I can't tell what should I press or click to access to that msconfig windows again to return boot options to normal state.
I have Windows 7 Home Premium in a laptop. How do start it in Safe Mode? I have malfunctioning antivirus program that won't uninstall nor shutdown, and I'd like to try fixing it with Safe Mode.
So the other day I boot up my computer and try to login under my user account. I get a "The user profile failed the logon. The user profile cannot be loaded" error message. After looking inline i find out how to fix this. The problem is I can't seem to boot into safe mode. It's an Asus motherboard P8H67-M series. I've tried hitting F8 and F5 (as was suggested with Asus boards), but neither of them work. I login under another use and type msconfig form the start menu to try and manually set the computer to boot into safe mode. I get asked for the admin password (my user account is the admin account), so I type is the password and I get a "windows cannot find C:windowssystem32msconfig.exe" error message.
The driver is mismanaging system PTES, and another one I think. So I could not boot into Safe Mode or Normal Mode. Eventually I got through and I cleaned out the registry and had it reinstall video drivers as well. Now all seems to work fine, except that the taskbar refuses to keep Use Small Icons checked, and when I click on Pin this program to taskbar with any random shortcut it does nothing at all.Both these things worked fine before the BSOD spam I had. It's an HP Workstation xw3100 running on the default VGA (video card died, getting a new one) with 2GB of DDR400 RAM (1GB factory RAM from HP) a SATA DVD/RW Drive and a Seagate 80GB 7200RPM HDD, everything else is as it was from the factory.
cannot boot into safe mode for windows 7. Booting normally works fine, and I notice no problems with it. When I try to boot into safe mode (or safe mode with networking..etc.), it doesn't work. It goes through lists of loading drivers for a bit, then the light blue windows login page background comes up, and it says configuring computer.Then the computer reboots. I don't need it for anything vital right now, but I sure don't want to try and fix it in the moment when I do need it.
My issue is that my PC reboots immediately every time I log in. I try to boot into safe mode using f8. When the option to use safe mode comes up my keyboard its unresponsive. The keyboard is wired and works fine in the bios settings screen. So I cannot boot into safe mode using f8 and it reboots immediately after I log in so I cannot us msconfig.
When I turn on my Acer laptop normally it loads but then completely freezes, not letting me do anything. The only way I can use it is through safe mode. It was working fine before it suddenly broke and it is only a few months old. I thought it might be a virus? I do have up to date anti virus thoug
my Sony VAIO VGC-LA3 seems to have a problem. I recently did a clean install of windows 7, which was no problem and completely drama free. I then sourced all the relevant drivers and installed a few essential programs and updates to get the machine up and running. I was then prompted into doing a restart so the updates could be installed. Upon restart the machine came on, start up options flashed up as normal and proceeded to the windows loading screen. The screen then goes black and shows no sign of coming back on until I bet the 'blue screen of death' 5 minutes later. The HDD and WIFI light do flash during these 5 mins. Then the computer restarts after the BSOD and says that Windows wasn�t shut down correctly etc� I chose to start normally and the same thing happens again. I then chose to start in Safe Mode With Networking and the machine would go through the start up procedure as expected, loading the OS with only basic drivers. I have tried wiping the hard drive and doing another installation of 7, with no success, and have also tried Vista, with the same result.
i recently tried removing some malaware from a laptop that kept rederecting my webpages. I used Hitman Pro and after scanning with it it asked me to reboot for the changes to take affect. One it rebooted igot the BSOD message. i Cant boot in safe mode so im lost on what option i have left. The main point is that i dont want to preform a clean install, and delete my documents.
I have just installed win 7 and got the dual boot with windows Xp, which I already had. now I want to do safe mode of windows Xp tapping the F8 during the boot, but nothing happens....no safe mode at all. What happened ???
I cannot rich the safe mode even in win 7. I don`t know why ???
Whenever I would boot my computer, the splash screen would hang and would not move onto the password screen. I would then have to restart my computer and activate safe mode so I can access system restore, find a restore point and go back to how it was earlier. I know for a fact that the Windows updates have been the key problem here, so I always backtrack a few system restores before that.
Now, the problem has come back and my restore points are ALL GONE. As I'm typing this, I am running SFC /SCANNOW, and here is the message that comes up at the end:
WINDOWS RESOURCE PROTECTION DID NOT FIND ANY INTEGRITY VIOLATIONS.
Also, I cannot access system protection. On the System page, there are only three options, when there should be four. What is going on here? If I try to restart my computer without safe mode, it will just hang again.
I have just reformatted my pc and know i cannot boot into safemode,whenever i try to load up safe mode the pc just resets once i actually getthe windows welcome logo come up just as im about to enter safemode desktop,i have scanned for malware using malwarebytes,bitdefender and superantispyware,but have found nothing
My set up is or was dual boot Windows 7 rc712 x64 and vista x64 on 2 partitions on the same drive. Suddenly bsod and looped rebooting with windows 7 and I can't even load windows 7 in safe mode. This ocurred after a video crashed in windows 7. I could not load safe mode but I could load vista x64 reguarly(it was a fresh OS I never used). I did a windows 7 upgrade install over the vista when I meant to reinstall on the windows 7.
I had tried to boot from windows 7 disk and couldn't repair the old windows 7 installation. How do I get back to my original windows 7?
Some other babkground info. Prior to all this but maybe unrelated were dreaded nvlddmkm.sys errors even after fresh installs of windows. This error was under my old 32 bit vista right after I changed video cards and occured after windows loads or windows media player opens. My solution was reinstall windows thus I upgraded to windows 7.
My orginal windows 7 custom install(not upgrade) still had some errors though not as many errors and I could boot into safe mode, shut down, then everything was back to normal until the next error. XFX(my video card manufacturer thinks it is a software driver issue and not hardware).
The other night I hit the reset button at the wrong time and ever since then I'm only able to boot W7 in safe mode. I've tried all of the restore points and repair options but nothing works.
I ran chkdsk from safe mode command prompt and corrupt files were found but I can't run chkdsk /F because the partition is in use. When asked if I'd like to schedule one on next start up I say yes but the restart doesn't get far enough to initialize one. It just hands at "Loading Windows" just after the keyboard lights blink.
I've tried to do an upgrade install but you can't do that while booting from the cd or while in safe mode either.
cant start my computer. wont load windows. in safe mode it just sits there doing nothing. in regular mode the windows logo comes up and just sits there. cant reboot it. don't know what to do next.
I access the safe mode boot menu by pressing f8 during start up. Once there I choose boot in safe mode, hit enter and then windows lists the drivers it is booting with. The boot continues, however once done, the computer is not in safe mode, but is in normal operating mode (i.e. there are no "safe mode" indications at the perimeter of the screen, and all apps are up and running as usual).
I am not trying to fix any problem, I just wanted to be sure safe mode was there in case I needed it. A couple of days ago I actually had a piece of malware that disabled my Avast anti-virus and was preventing me from accessing the internet, and at that time I tried to boot into safe mode and had the same problem. I restored the computer with an image I had taken when the machine was new, which resolved the malware problem, but not the safe boot problem.
Incidentally, I have looked at the registry and the safe boot entries are intact: (HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot is there along with it's subkeys Mininal and Network).
I am using Avast anti virus (paid version), Libre Office, Skype, Firefox and have a HP office jet 4500 printer. The machine is an ASUS U43F with an I5 processor.
I got a BSOD yesterday which was most likely from overheating and now 30-60 seconds after I boot it normally, it freezes yet my mouse still moves. Ten second later, all the screen shows is my background. I've tried system restore, then I went it BIOS and ran a test on the system memory which passed, scanned for malware and spyware, used both CCleaner and IObit Advance SystemCare to clean up registry and junk files, and then defragmented the hard drive expecting that might do something and it still freezes.Edit: I've been looking at the start ups and don't see anything that suspicious.[CODE]
my computer will not boot up normally or in the safet mode after installing Norton Power Eraser. Performed the following actions:1. Attempted to use System Restore, program will run but failed.2. System Repair also failed.3. Performed the following steps from your Forum Dated Feb 2012 (Computer will not boot after using NortonPower Eraser echnician is OH MYa. Diagnose Blue Screen Error 0x0000007b (0xFFFFFF88009A98E8, 0xFFFFFFFFC000000D, 0x0000000000000000, 0x0000000000000000.Performed a Chkdsk/r from Recovery Environment, no problems detected.Can only boot it up after reseting "/NOEXECUTE=OPTIN" all the time.
Yesterday I have installed Mirrors edge to my laptop Asus k50ab, I have windows 7 64 bit, after playing the game, I restarted pc, and then it just failed to start and pc restarted, same thing in all safe modes. I think its problem with graphic card update, i have ATI , and probably installed Nvidia update...
Always writes this error: "A problem has been detected and windows has been shut down to prevent damage to your computer."
I'm frankly not that familiar with Windows 7. Also, this isn't a computer that I used, so I'm not familiar with what exactly was happening, if anything, before the situation it's in now.My friend has the following system:Gateway NV7915uIntel Core i3 330M 2.13Ghz500 GB SATA HDD4 GB DDR3 SDRAMWindows 7 Home Premium 64 BitOn Start Windows Normally, it just freezes on "Starting Windows" I have left it like this for days with no progress.On Launch Startup Repair, "Windows is loading files..." OK Then when "Starting Windows" appears, BSOD:DRIVE_IRQL_NOT_LESS_OR_EQUALSTOP: 0x000000D1On Safe Mode, BSOD at classpnp.sys:PAGE_FAULT_IN_NONPAGED_AREASTOP: 0x00000050On Debug Kernel, freezes on "Starting Windows"On Windows Home Premium 64-Bit Recovery Disc (I downloaded this, I did not make it from this system, the owner never did this), Windows Setup [EMS Enabled].... "Windows is loading files..." OK, Progress bar moves a bit and then:STOP: c00021a {Fatal System Error}The initial session process or system process terminated unexpectedly with a status of 0x00000000The system has been shut down.
If I use a Retail Windows 7 Disc, "Windows is loading files" OK, then "Starting Windows" the logo forms, and boom:STOP: 0x0000008EI took the HDD out of this system and popped it in my tower. I ran a virus scan (as expected, nothing found), ran an Advanced System Care 5 scan/cleanup. Then I ran a Check Disk (Checked - Automatically fix file system errors and Checked Scan for and attempt recovery of bad sectors), finished fine. no issues.All files are accessible and everything seems fine on the HDD when it's a slave in my tower.So at this point, since I cannot boot into any form of Windows or repair or command prompt that I am aware of, what can I do?