The CPU, heatsink, motherboard and RAM came premade by 3XS from SCAN. I have made sure it's all seated properly etc.
Intel i7 2600 @ 3.4gb
8gb RAM Corsair Vengeance
Win 7 64 fresh install
Radeon HD 7850 Graphics Card.
Asus z77 motherboard.
However after about a week of usage with no errors all of a sudden I have started getting the odd BSOD, and today I have had about 20, even in safe mode.
i'm having issues with my Windows 7 Ultimate 64 bit PC. Every so often it will just BSOD on me. I've had a look at the errors and it mentions MEMORY_MANAGEMENT and ntoskrnl.exe, but i don't really know what i'm doing so i figured i'd get some REAL help. I've recently installed new graphic drivers, hoping that might help but it just crashed on me again.Windows was pre installed on the machine and the machine itself is only a year old.
View 3 Replies View RelatedI've got:
HP notebook a Pavillion dv9000 9930us
4 gig DDR2 SDRAM
Nvidia Geforce 8600M GS
320 gig HD
Was: Windows Vista Home Premium x64
Now: Windows 7 Ultimate x64
and windows 7 does not love me. Every time I install things look to be going smoothly, then on the first boot (and from then on) every time I try to access any admin privileges I get the BSOD usually from IRQ, or page memory or a number of messages and the computer immediately reboots. This isn't a problem when I'm in safe mode, but when I'm there it shows that all the hardware is installed and working. Even then safe mode only gives me about 2 hours before it BSODs again.
Does this laptop just hate windows 7 or is there something I can do about this?
My Windows 7 on a Lenovo lap top is constantly running safe mode at start up.
View 5 Replies View RelatedThis morning i turned on my PC, and for the first few minutes it worked fine, but then it turned horrible. Everything froze when i attempted to click it or even hover my cursor over it. I tried to open task manager to shut down Firefox, but it took around ~20 minutes for task manager to open. Once everything was closed, I scanned with MBAM Pro and nothing was found, so I read about this on other sites. They said to clean the registry with a program called WiseCleaner. It took me 15 minutes to get it, but when it finished scanning it found 853 problems in the registry. I also defragmented the registry. Also, whenever I try to boot into safe mode, my computer freezes at CLASSPNP.SYS. Not sure what to do now, as no improvement was made.
Specs: Windows 7 Home Premium SP1, Intel Core i7 Q740, 6 gigs of RAM, ATI Radeon 5850m
Getting several BSoD a day and it driving me mad! I have replaced the RAM but still giving me the "fault in non paged area" error and i have reinstalled windows and the error still there
i have a pile of memdumps if someone can help me
BSoD error i have had "IRQ", "MEMORYMAGEMENT" and "NON PAGE FAULT",
with me replacing the ram and reinstalling windows, where else could cause this issue?
After previously solving the BSOD error "a clock interrupt was not received on a secondary processor within the allocated time interval" by replacing the CPU, I have run into another BSOD. This time the error is "memory management". After doing some research I'm thinking this error is about some program conflicts or something similar (I'm hoping that is the case!), instead of a hardware problem. I have attached the last 3 minidumps I have.
View 14 Replies View RelatedI started to get random BSODs, usually after a few hours after turning on my PC. The only major change I made was a firmware upgrade to my Asus P8Z68-V Pro MB to the latest iteration: 3203 released Feb 21/12. Recently my website got hacked via ftp password breach but I ran a full system AV & Malware scan and results were clean.
Windows 7 64-bit (student upgrade version), approx 8 months old.
System: Intel i5 2500k cpu @ stock, 8800GT, 16GB G.Skill PC3-12800 ddr3 ram,
Windows booting off a WD 1.5gb Black HDD
[code] I bought this computer at Microcenter, they manufacture them and sell them under the brand PowerSpec. Mine is the B633 Since I bought it, it had had multiple errors, as shown in the attached .zip. I want to know what I need to do to fix these errors.I have ran memtest and let it do 10 passes with 0 errors. I am running driver verifier right now and have had 2 BSOD that I have never seen before, one was Special Pool...? Most of the time it is Memory Management BSOD, however.
View 7 Replies View Relatedmy computer has been receiving random BSODs throughout the day, especially when I am browsing the web. The message is usually "memory management." This computer is around 3 months old. The first 1 1/2 month, it did not experience this problem. However, from July and onwards, my computer would get BSOD; it would occur at least once a day.
According to BlueScreenView, the driver that is causing BSOD is "ntoskrnl.exe."
i recently made a thread in regards to my blue screens and i will now upload more of the minidumps. they generally occur when i am on chrome and watching a Internet video. i just received one then in regards to memory_management and no reason was shown.
View 5 Replies View RelatedSo I've been having random BSOD's for 10 day's now - They appear at complete random and I can't tell why, Each time they display 'Memory Management' - I can normally diagnose them and narrow it down, However I cannot seem to do so. Can an expert have a look at the dumps and see if they can work it out?
View 3 Replies View RelatedRecently I have been getting random BSOD some say Management, other say Non Default, Bad_Pool_Header, maybe some others but the BSOD is to fast for me to read exactly what it says. I been doing my research on how exactly I can even first look at this mini dumps found a program call (BlueScreenView) When look around i can see all id the dumps there but am seeing the the main culprit is a ntoskrnl.exe. Now I am guessing this Because it was shown alot. People have said to run memory checks, your ram sticks are going bad, restore your computer, but honestly I an clueless.
I would like to know
1) What are the step to find the problem
2) How to fix it
3) How to prevent it
Suddenly my computer could just black out, looks like it is turning itself off, but not completely. The fans is still running, but can't use the computer and the screen is black.And yesterday I got a BSOD also. Don't know if this Memory Management issue has something to do with my earlier blackouts, but I hope so. So that there is only 1 thing to fix ;-)Yesterday I ran Memtest86+ for 10 passes and 22 hours. And I got zero errors. See picture.
View 2 Replies View RelatedI just bought my new laptop 1 month ago, but BSOD occurred for many times.Window 7 Home Premium
System
Manufacturer Hewlett-Packard
Model HP G42 Notebook PC
Total amount of system memory 4.00 GB RAM
System type 64-bit operating system
Number of processor cores 2
Storage
Total size of hard disk(s) 596 GB
Graphics
Display adapter type ATI Mobility Radeon HD 6370
Total available graphics memory 2746 MB
Dedicated graphics memory 1024 MB
Dedicated system memory 0 MB
[code]....
Acer Aspire 4740G. 2 years old. Last 1-2 weeks constant BSOD as per title, and random freezing up, forcing restart. On restart, random issues pop-up e.g. "Windows explorer is not working", "Login services not working (causes me to be logged into a new profile, all settings, icons, wallpaper gone)". The system has run the Memory Diagnostics test. Extracting from the Event Viewer, the results are as follows:
Log Name: System
Source: Microsoft-Windows-MemoryDiagnostics-Results
Date: 16/04/2012 09:09:37
Event ID: 1102
Task Category: None
[code]....
I have been experiencing random reboots which very often fail and occasional BSOD crashes, the last one refers to memory management. I am running Panda cloud antivirus and malwarebytes.Original OS was preinstalled retail version win xp proff. Current OS full retail version win 7 64bit home premium Hardware new Dec 2006. Dual boot 2 x sata hard drives?
View 5 Replies View RelatedI have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
So I am having trouble with my computer since last night it started to give me the blue screen of death every 10-15 minutes with all kinds of different reasons. I cleaned my pc, searched for viruses as much as I could, and I have restored to a different point in time twice. I have tried the windows memory diagnostic twice. No issues. I have tried the files check before start up, no issues were detected.Pfn_list_curruptan attempt was made to write read only memorysomething on the lines of service_system_exeption? Not sure about the last word to be honest I caught it while my computer restarted on its own. Memory_ managment Bad_pool_errorI am not sure what to do I have done all I can by myself. I will be doing a complete restore to manufacture settings after I get something to back up my files. In the meantime maybe I can figure out if it is a hardware issue or if there is something else currupt.
View 2 Replies View RelatedMy computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
View 3 Replies View RelatedEarlier today I wanted to get into Safe Mode in order to cleanup up leftover files from an uninstall of Catalyst.I have a hard time getting into safe mode via my BIOS so I generally use msconfig. I always set it to run straight into Safe Mode (which is what I did today). When I restarted I got the 01E BSOD. I'm assuming it is another driver or that my system files are corrupted.I checked my hardware and individually ruled that out.Now I am in a situation where I cannot boot into the regular OS to try and figure out what is really going on (gather the dump files etc..). I have been trying to access msconfig via the command line from my DVD but can't figure out how to get the right permissions and actually run it to turn off the safe mode boot option. I use a RAID 0 startup so I have to load the RAID drivers when I pop in the DVD. Then I have to switch drives from the command prompt from "X" to whatever the RAID drive shows up as.
View 4 Replies View Relatedmy computer was running fine then yesterday i suddenly got shut down and anytime i turned it back on i would get a BSOD after a few seconds unless i went to safe mode its a page_fault_in_nonpaged_area 0x00000050.the only thing different is i downloaded borderlands from steam, played for about 8 hours, then got the packs running, then 10 mins later it shut itself down on its own currently system restore only had 2 options for 8am when i downloaded borderlands, 1 said critical system update adn the other was direct x 9 im not good with computer hardware so if u need any more info tell me, but heres some system stuff System Info Processor: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz
[code]...
getting BSOD after boot and desktop comes up. i can get in safe mode without BSOD coming up. Attached SF Diagnost. from my Dell Laptop.
View 3 Replies View Relatedi recently tried removing some malaware from a laptop that kept rederecting my webpages. I used Hitman Pro and after scanning with it it asked me to reboot for the changes to take affect. One it rebooted igot the BSOD message. i Cant boot in safe mode so im lost on what option i have left. The main point is that i dont want to preform a clean install, and delete my documents.
View 3 Replies View RelatedMy set up is or was dual boot Windows 7 rc712 x64 and vista x64 on 2 partitions on the same drive. Suddenly bsod and looped rebooting with windows 7 and I can't even load windows 7 in safe mode. This ocurred after a video crashed in windows 7. I could not load safe mode but I could load vista x64 reguarly(it was a fresh OS I never used). I did a windows 7 upgrade install over the vista when I meant to reinstall on the windows 7.
I had tried to boot from windows 7 disk and couldn't repair the old windows 7 installation. How do I get back to my original windows 7?
Some other babkground info. Prior to all this but maybe unrelated were dreaded nvlddmkm.sys errors even after fresh installs of windows. This error was under my old 32 bit vista right after I changed video cards and occured after windows loads or windows media player opens. My solution was reinstall windows thus I upgraded to windows 7.
My orginal windows 7 custom install(not upgrade) still had some errors though not as many errors and I could boot into safe mode, shut down, then everything was back to normal until the next error. XFX(my video card manufacturer thinks it is a software driver issue and not hardware).
So last night I updated my computer (which I don't often do). Then today I go to play a game and I bsod. Try again, same thing. I boot in safe mode. Bsod again. I boot in safe mode once again and revert to a restore point from three days ago. I go to play the game again, bsod. There's only the most recent bsod saved from all of it, which I've uploaded here: [URL]. I didn't write down the information to "find solutions" for, unfortunately, suffice to say that the error given was just BlueScreen.
The updates I installed were:
KB2588516
KB2617657
KB2620704
KB2641690
KB890830
As well as a small handful of office 2010 updates.
I have been having nonfrequent bsod errors for quite a while, and since playing a game of Starcraft 2 today (~3 hours ago) my computer started to constantly bsod. I can not log into windows for more than a minute or two (if that) before it BSOD's again. I am currently posting with my laptop, and the desktop that is BSOD'ing is dualbooting linux (ubuntu) which has no BSOD issues whatsoever. I also ran the memtest that comes with installing ubuntu and no issues were found. Attached are my minidumps.
View 5 Replies View Related[code] I couldn't do a health report due to being stuck with safe mode with networking. The BSOD started about two months ago while the gf was using it and didn't happen for me till yesterday. As of now I can get it to start normally but It crashes any time I open anything. I tried swapping ram and no change. I honestly don't know a whole lot about windows 7.
View 9 Replies View RelatedAcer AO522 64 GB SSD by Transcend
0x000000F4 (0x0000000000000003 , 0xFFFFFA8003418B30 , 0xFFFFFA8003418E10 , 0xFFFFF80001D9B8B0 ) BSOD ( disk drive related I guess ? )
Like in the topic - BSOD shows up at startup, even in safe mode.
I don't have any minidumps - just the memory dump.
I'm frankly not that familiar with Windows 7. Also, this isn't a computer that I used, so I'm not familiar with what exactly was happening, if anything, before the situation it's in now.My friend has the following system:Gateway NV7915uIntel Core i3 330M 2.13Ghz500 GB SATA HDD4 GB DDR3 SDRAMWindows 7 Home Premium 64 BitOn Start Windows Normally, it just freezes on "Starting Windows" I have left it like this for days with no progress.On Launch Startup Repair, "Windows is loading files..." OK Then when "Starting Windows" appears, BSOD:DRIVE_IRQL_NOT_LESS_OR_EQUALSTOP: 0x000000D1On Safe Mode, BSOD at classpnp.sys:PAGE_FAULT_IN_NONPAGED_AREASTOP: 0x00000050On Debug Kernel, freezes on "Starting Windows"On Windows Home Premium 64-Bit Recovery Disc (I downloaded this, I did not make it from this system, the owner never did this), Windows Setup [EMS Enabled].... "Windows is loading files..." OK, Progress bar moves a bit and then:STOP: c00021a {Fatal System Error}The initial session process or system process terminated unexpectedly with a status of 0x00000000The system has been shut down.
If I use a Retail Windows 7 Disc, "Windows is loading files" OK, then "Starting Windows" the logo forms, and boom:STOP: 0x0000008EI took the HDD out of this system and popped it in my tower. I ran a virus scan (as expected, nothing found), ran an Advanced System Care 5 scan/cleanup. Then I ran a Check Disk (Checked - Automatically fix file system errors and Checked Scan for and attempt recovery of bad sectors), finished fine. no issues.All files are accessible and everything seems fine on the HDD when it's a slave in my tower.So at this point, since I cannot boot into any form of Windows or repair or command prompt that I am aware of, what can I do?
i been getting bsod alot in the past week a few time i got a few with ROQE LESS OR EQUAL something like that but i think i solve that already. now i getting the 0x000000f4 it just appear yesterday when i was watching a movie online snice then no matter if i start it on normal or any safe mode it appear after like 5 second after the restart so i cant get the dump files. the only thing i overclock is the cpu fan thats it.
View 9 Replies View Related