i been getting bsod alot in the past week a few time i got a few with ROQE LESS OR EQUAL something like that but i think i solve that already. now i getting the 0x000000f4 it just appear yesterday when i was watching a movie online snice then no matter if i start it on normal or any safe mode it appear after like 5 second after the restart so i cant get the dump files. the only thing i overclock is the cpu fan thats it.
View 9 Replies
Acer AO522 64 GB SSD by Transcend
0x000000F4 (0x0000000000000003 , 0xFFFFFA8003418B30 , 0xFFFFFA8003418E10 , 0xFFFFF80001D9B8B0 ) BSOD ( disk drive related I guess ? )
Like in the topic - BSOD shows up at startup, even in safe mode.
I don't have any minidumps - just the memory dump.
Dell Inspiron laptop, working fine, shut itself down last night mid work and now will kind of start up but only go so far. am left with Black screen with a blinking cursor in the top left hand corner. Managed to get f8 to work after a while. It runs the pre-boot system assessment build 4116 - everything gets a "pass" except The hard drive which gets a "running". All memory tests "pass" also. After this it will go no further, no more screens. Running windows 7....F2 and F12 will not work either so cannot start in safe!
View 2 Replies View RelatedI had a BSOD problem launching Borderlands 2, and some other games too. My Video Card drivers are up to date and i still have BSOD. I got blue screen once more, and my pc restarted. Now I can't even start my windows, I get some black screen before windows 7 logo appears and I can't even start my windows in safe mode nor can I boot from a CD/DVD.
My system specs:
Processor: AMD FX-8120
Graphics Card: AMD Radeon HD 6850
RAM: 8GB 1866mhz
HDD: 500GB
i cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
View 1 Replies View RelatedI am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
View 1 Replies View RelatedI have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
View 44 Replies View Relatedi bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
View 4 Replies View RelatedI have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
So I am having trouble with my computer since last night it started to give me the blue screen of death every 10-15 minutes with all kinds of different reasons. I cleaned my pc, searched for viruses as much as I could, and I have restored to a different point in time twice. I have tried the windows memory diagnostic twice. No issues. I have tried the files check before start up, no issues were detected.Pfn_list_curruptan attempt was made to write read only memorysomething on the lines of service_system_exeption? Not sure about the last word to be honest I caught it while my computer restarted on its own. Memory_ managment Bad_pool_errorI am not sure what to do I have done all I can by myself. I will be doing a complete restore to manufacture settings after I get something to back up my files. In the meantime maybe I can figure out if it is a hardware issue or if there is something else currupt.
View 2 Replies View RelatedSo i just purchased a new computer to run World of Warcraft xDThis morning my computer wasnt working as intended. I booted it up and it went through the usual stuff, the winds logo popped up, then suddenly the screen went black and i got the message "out of range" on my monitor.I restarted the computer and the same happened again, after the windows logo, the screen goes blank.I then ran it in safe mode + networking and everything was fine !I tried "repair my computer" on the start up menu, but the PC still wouldnt run in normal mode.I tried configuring my PC to an earlier point in time, but the PC still wouldnt run in normal mode .I tried uninstalling my drivers (within safe mode) and it still wouldnt boot up in normal mode.
Could it be the monitor resolution? if so whyyyyy? it's been working fine for two weeks.Also yesterday we had about 5 random power cuts? could this have caused the problem?Everything works fine in safe mode so i think it's not a hardware problem, but normal mode just gets me to the windows logo loading screen then the monitor goes black
Loading files hangs up on atipci64.says
I am having so much trouble getting my system back to working
i switched on my laptop today i could only start in safe mode i since read a few threads on here leading me to create a recovery disc but it wouldnt let me do that eitheri kept getting error message : unspecified error (0x80004005)i did the CMD prompt - then - net user administrator /active:yeslogged back in on administrator account but still got same error messagenow im really lost,[CODE]
View 9 Replies View RelatedMy computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
View 3 Replies View RelatedMy computer will only start in safe mode. When booting normally, the computer freezes at login.
View 11 Replies View RelatedMy little brother was away for 3 months and forgot his password. He has no adminastrative password or any other kind of backup. The only way was to restart in Safe Mode and the next option is to click the Start button on the log in page but there is no button. Is there any other way to fix this...
View 1 Replies View RelatedI can only boot up in safe mode Ive tried loading windows 7 disc to repair wont work in safe mode,did restore no luck,did panda safe disk reload did virus scan clean,did dskchk,tried start windows normal from f8 menu,last known good config etc.
View 3 Replies View RelatedI have a Gateway desktop running windows 7 -64. While the system was powered on with no activity, it shut down and started to re-boot. Now every time I try to start the system it gives the message 'Reboot & select proper boot device or insert boot media and select'. From this screen you can't do anything. I'm not able to start in safe-mode either. I can get F12 to work to get to boot manager.
View 1 Replies View RelatedWindows 7 Home Premium, Emachines E725 laptop.I just got through dealing with an infection. Details in this thread:[URL] restarted and F8ed my way to Advanced Boot Options and selected Safe Mode with networking. It started up normally, got to the Users page, I selected my profile, typed in my password and the puter suddenly restarted. Huh. So I tried again and typed faster. The puter at first began to start up in safe mode then suddenly restarted. I tried one more time but this time when it got to the Profiles page I left it alone and counted. 12 seconds later it suddenly restarted by itself. So, I can not enter Safe Mode.The infection has been removed and MSE shows that it is clear. Correlation is not causation so I can not say that the Safe Mode problem is related to the infection, and I can not even remember ever starting this particular machine in Safe Mode since I bought it new.
View 14 Replies View Relatedthis might seem like a really dumb question but i've tried pressing f8 repeatedly on asus screen to try and start windows in safe mode but it never works.
View 4 Replies View RelatedI'm a complete novice at thisMy computer will not start-up normallyOr in safe mode, Failure ID 6CQ708-4RH6B4-XD03HF-60Q003 When I run hard disc testIt stops loading when it gets to Windowssystem 32driversNISx641008030.006SYMEFA64.sys
View 1 Replies View RelatedGot a nice comp about a year ago off craigslist and havent had a single issue with it until now. I am not your typical "oh-you-mean-I-have-to-plug-it-in-to-work" end user, but neither am I an "expert". Especially in this case I'm in way over my head; a few days ago I went to slave up a buddy's HD. The mistake here was that I had always worked with ATA, not SATA. Yes, I was a temporary idiot, and no, I don't remember WHAT I was thinking. Whatever was or wasn't going through my head, I hooked up the second drive to the second clip on the (belt?). Everything started as usual until the windows loading bar; after the bar, I got a black screen, and then the computer shut itself off.On attempt #2 to startup (and removing the second hard drive), before the loading bar, I get a prompt for "Windows startup repair" or "Start windows normally". Option #1 results in "windows is loading files" for about 10 seconds, then black screen, then computer shuts itself off again. Option #2 just results in windows loading bar, black screen, then computer shuts itself off.
Error Code: 4400:11A
Msg: SCSI_0-000_DISK_GENERIC-_SD/MMC - Target not ready
After running diagnostics specifically towards this, it consistently fails the Confidence Test and consistently passes the Device Self Test (the Read Test and Verify Test options are greyed out).I've defaulted everything in the BIOS (although it says my HD is in a Raid setting, which as I understand it is for synching multiple HDs together, but the only option to change it to is ATA, which I know my HD is not). I have tried bare-bonesing the startup as well, but running only microsoft stuff I still get the same results as above, and I dont know enough to risk turning off anymore startup stuff.
The most confusing part of all is when I broke down and just decided to reformat the drive and start from scratch. Again, I could only boot from the Windows 7 CD in safe mode, and while in there I reformatted the main drive (there are 3 partitions; OEM, Recovery, and the Main). I have done this process multiple times, but the only thing I get even after reformatting the drive is more OS to choose from when starting the comp.As for computer stats I dont remember everything off the top of my head, and can't get past the setup screen now on windows, so I dont know how to check. From the dell website comes this mess: Dell Technical Support Home Page / Dell Troubleshooting Search Other than that what I can remember is:8gig ram, quadcore (cant remember gHZ), 1mb ATI Radeon vid card, Windows 7 Home Premium 64-bit. Sorry if this isn't enough, if anyone knows of a way I can check for further info I'll be happy to oblige.
Why am I getting blue screen? Loading files, then nothin
View 1 Replies View RelatedI have recently noticed the last couple of weeks that my computer is running slower than normal. In the last week. I noticed my anti-virus software from Norton is no longer working. When I tried to delete the file to re-download it the program would not delete from my computer. I tried to just update it from the internet the "Run; Save;Cancel menu appeared and when I clicked run nothing happened. I tried this function in safe mode with the same result.
Now my problem is affecting other programs like Microsoft and the shortcuts on my desktop. I have tried downloading the AVG anti virus I ran into the same problem. I am lost for options since it is not letting me run any programs on my computer. I can download programs just fine but thats it. I can use the internet just fine but I try to stay away from that since it leaves me open for more viruses. I need to know of other options that I can try.
I have an HP laptop, and here are the specs I know:
HP G72 Notebook PC
Intel Core i3 2.4 GHz processor
4 GB ram
Windows 7 Home Premium 64-bit OS
Recently I was streaming a TV show off of sidereel.com and firefox froze. I switched to Internet explorer and began to watch again, but the computer began to make a "dinging" noise occasionally. I then ran a norton anti-virus sweep which turned up only a few cookies.After this, I watched lectures from my school's class that I had downloaded, and during this time, the computer froze and became unresponsive. I turned it off manually, and it has not been able to restart in normal mode since then. Every time I try to login, after I put in my password, it goes to a blue screen and says "System_Service_Exception" and then it restarts itself.
Occasionally it doesn't even make it to the windows login, and freezes at the "HP" screen in the beginning of startup.Around the same time that this problem manifested itself, there may have been a new Windows 7 update that my computer was running in the background on its own.I think the problem may be more related to the windows update than to other issues, but I have tried going to a system restore point (coincidentally, the only point available might be a restore point created by the windows update). I have no other restore points available, but I am able to access my computer in safe mode.
Does anyone know how to start Windows 7 ultimate in safe mode
View 2 Replies View RelatedYesterday, I added malware bytes protection and also last night installed avg 2012. Ran scans, everything was moving faster. Shut down last night...and this morning windows will not come on in normal or safe mode. When try to start in safe mode it says STOP: c0000135 program cannot start %hs is missing. On another post with similar code it had a link to put on usb drive and to put in infected laptop and restart with f8. When I did that it said no bootable partition in table. When usb is not in it just goes back to stop message. I have a dell inspiron core i3 (I don't know if that matters). I have tried running restore to previous time and it did not work. when i click on repair it goes to the launch window or start in safe mode option?
View 2 Replies View RelatedYesterday I have installed Mirrors edge to my laptop Asus k50ab, I have windows 7 64 bit, after playing the game, I restarted pc, and then it just failed to start and pc restarted, same thing in all safe modes. I think its problem with graphic card update, i have ATI , and probably installed Nvidia update...
Always writes this error: "A problem has been detected and windows has been shut down to prevent damage to your computer."
Technical information:
*** STOP: 0x0000007B (0xFFFFF88009A9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)"
I tried almost everything, but i think if i will delete that update or something , it will run..
At any rate, I just got myself a new ASUS laptop running windows 7 64-bit. Now I had no problems with it setting up Firefox, installing antivirus or installing the host of windows updates.What did happen is that when I tried to reboot (for the second time, first time wasn't a problem) it gave me a screen called "configuring windows features". Now I at this point I cried out a few curses and went to have something to eat.When I returned, half an hour later, the progress was still at 15%, the same as when I left it. Obviously having frozen up, I gave it a quick search. People with similar problems with windows updates reccomended forcing a powerdown despite the warning.After waiting for another half hour I did just that. Now Windows is refusing to start at all. It just sits at the "starting Windows" screen. Safe mode gets stuck on the screen with the list of drivers and restoration tools just gives me a black screen.
View 8 Replies View RelatedMy computer does not go past the "starting windows" logo on my computer. When it does the cursor just stays there loading. On top of that im not even able to do a system restore because of some type of error. Everything works fine on Safe Mode, and I really dont think its a virus.
View 4 Replies View RelatedI have tried to start my laptop normally and in safe mode and it send me to start upi repair, this runs for two days and then I get an error message about no communications code 0xc00000e9
View 2 Replies View Related
