ShellExecuteEx Failed; Code 170 The Requested Resource Is In Use?
Nov 29, 2012i cannot install any .exe file. every time shows an error message ''shellExecuteEx failed; code 170 The requested resource is in use'
View 2 Replies
ADVERTISEMENT
Error 170 Requested Resource Is In Use
Nov 24, 2012I've been unable to diagnose an error I've been receiving when I try to open programs (Error 170 "The Requested Resource is in Use"). I've googled the problem and although it appears to be a fairly common error, almost every site I've been to seems to think that I have some kind of removable storage hooked up, which I don't. This is happening whenever I try to open a program whether it be Advanced SystemCare or System Restore. Further more, I'm unable to manage several tasks in Windows, such as creating user accounts. My anti-virus has come up clean, so I'm at a loss.
View 2 Replies View RelatedError Message Windows Resource Protection Could Not Perform The Requested Operation
Apr 19, 2012i have tried both method, but all i got was this error message Windows Resource Protection could not perform the requested operation.
View 6 Replies View RelatedRestore Failed Error Code = 0x45
Jan 22, 2012Trying to restore Emachine E28 laptop.After last install disk runs I receive the following message:Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)Have tried almost everything I can think of but no results.
View 5 Replies View RelatedConnection Failed: Error Code 23 - Raidcall
Nov 7, 2012(I was going to post this in the software section, but I assumed since it pertains to the network portion of the application and that I can connect through a VPN, that the problem is LAN Network oriented)I recently installed the software Raidcall (RaidCall-100% FREE Group Communication Software- IM, Group Communication and Voice Chat) which is a program designed to be a cross between Skype and Ventrilo. I avidly registered and the process went smoothly. That was all until I came up to login screen where after entering my information, I got the following error: Connection Failed. please try again later (Error code:23). Does this have something to do with Cyclic Redundancy Checking? That's the only information I could come up with. I've done as much research as I can think of, sent them an email with lots of information (no response as to the answer yet), and also asked on their forums but no dice.
Background information (I can provide more if needed)
- On a University Campus ( Technical Information | IT | Indiana Wesleyan University )
-I"m connected directly through to their wall. I"ve also tried swapping out my own cables to no avail.
- Have done an Error Checking Check for both drives (for CYC relation - which I think it may be the culprit (I"m not tech savy though hence my forum post)
- I CAN connect to it through a VPN (Hotshield) - obviously I don't want to have this be my way of connecting through it because I want to use Raidcall while playing (World of Warcraft) and it gives me horrible latency.
- I've called my IT support here at school, and they didn't think it would be something on their end. Although the guy on the other end did not sound intelligible at all.
DllRegisterServer Failed With Error Code 0x8002801c
May 24, 2011I received an error message- The module "mswinsck.ocx" was loaded but the call to DllRegisterServer failed with error code 0x8002801c.
View 1 Replies View RelatedRestore Failed - Error Code 1005
Nov 23, 2011I'm trying to restore Windows 7 on my computer (I'm currently using Ubuntu 11.10), and I keep getting Error Code 1005. I've tried everything, and nothing.
View 1 Replies View RelatedDllRegisterServer Failed With Error Code 0x8002801c
Jul 9, 2012I can't launch windows media player with error message DllRegisterServer failed with error code 0x8002801c.
View 1 Replies View RelatedDll Registerserver Failed Error Code 0x80020009
Jan 21, 2013I have this issue dll registerserver failed error code 0x80020009 when I register a dll in win7 64bit.
View 1 Replies View RelatedCocreateinstance Failed - Code 0x80040154 Class Not Registered
Feb 26, 2011This popped up all of a sudden when I went to windows update.
"Cocreateinstance failed; code 0x80040154 class not registered".
System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, v.721, 64 bit
Processor: AMD Phenom(tm) II X4 940 Processor, AMD64 Family 16 Model 4 Stepping 2
Processor Count: 4
RAM: 3839 Mb
Graphics Card: ATI Radeon HD 3300 Graphics, 384 Mb
Hard Drives: C: Total - 476937 MB, Free - 375796 MB; D: Total - 76308 MB, Free - 30433 MB; F: Total - 57295 MB, Free - 26892 MB;
Motherboard: BIOSTAR Group, TA790GX 128M, , None
Antivirus: Microsoft Security Essentials, Updated and Enabled
Backup Failed At 57% Several Times With Error Code 0x81000039
Jan 20, 2012I have been trying to do a backup with system image since Jan 15th on an Iomega 1TB external HD. Tried about 7 times and each time the backup fails at 57%. The message I receive with each failure is as follows- "Windows backup encountered an error when accessing the remote shared file. The semaphore timeout period has expired. Details: Error code 0x81000039" I chatted with a tech from my external HD manufacturer and he finally told me that the problem was with my OS and settings. I tried doing a backup on a different external HD and still failed at 57%. I have no idea which remote shared file the program is looking for. I have a home network and one other computer. That laptop was turned on so if it was looking for a file there it was available. The tech suggested that I turn off my antivirus and firewall and if I was concerned about intrusion to disconnect from the internet. Did that and the backup still failed. I have the same setup on desktop and laptop Windows 7 SP!, Vipre antivirus and firewall, and I was able to do a backup on my laptop. Another slight problem is when I have the Iomega HD running my computer will freeze randomly. For this reason I don't keep it on all the time but just turn on for a monthly backup. I was able to do one initial backup on that HD with no problem. I was told to look at the windows backup log files but they all have a .etl extension and I do not know how to open them to see if the logs give me any idea what file it is hanging up on.
View 7 Replies View RelatedError Code 315 - Printer Spooler Operation Failed
Feb 4, 2013I'm getting this error, but I can still print locally and from the network.
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 2/4/2013 8:15:49 AM
Event ID: 315
Task Category: Sharing a printer
Level: Error
Keywords: Classic Spooler Event,Printer
[Log] ........
Windows Update Failed - Code Error 8000ffff
Jan 15, 2013about a month I have a problem with the updates of windows 7 professional 32 bit. When I turn on the PC, Windows tries to install an update, it hangs at 35% and the pc restarts 3 times before using it. after, if I click on search updates, I have error code 8000ffff. I tried microsoft fixit but I have not resolved.
this is the file of MGA.
Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
[Code].....
Restore Failed Error Code = 1117 In Windows 7 Home
Apr 19, 2011I have a problem with restore failed error=1117 in win 7 what do I need to do Also It's says About the NLS data is missing or corrupt
View 4 Replies View Related"Final Result: Installation Failed With Error Code: (0x80070643)
Jan 1, 2012I am trying to install Microsoft Network Framework v.4 (x64) and I keep getting error "Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation" (Elapsed time: 0 00:01:01)." The exact log file is attached: Code: OS Version Information:
OS Version = 6.1.7601, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Ultimate Edition Service Pack 1
OS Version Information
[code].....
All System Files Have Been Moved To Windows.old Dir / Result: Failed. Error Code = 0x490
Jun 14, 2010I�m running a single Windows 7 Ultimate x86 OS on my laptop and it used to work very well �till earlier today once I get back home trying to use my computer as usual to find out that it always runs the startup repair after showing the words �windows is loading files� instead of starting windows normally. Once the diagnostic & repair process is done it tells me that Startup Repair cannot repair this computer automatically. When I view the details I get the following under Root cause found:
Boot configuration is corrupted.
Repair action: Partition table repair.
Result: Failed. Error code = 0x490
After many times doing the previous repairs with no result I went to Command Prompt in order to check my system drive to find out that both �Windows� & �Program Files� directories are not existed there anymore. Instead, there�s a �Windows.old� directory that contains those 2 system directories as well as �Users� & �PerfLogs� directories plus the �autoexec.bat� & �config.sys� files. Sure there�s noway to use the system restore tool or anything else even using my Windows boot DVD. Still can�t use the cmd commands single handedly to fix this.As I said earlier I have never faced such problem before plus I have no idea how to regain my windows since I can never format my system drive as I need to backup all the files, settings, bookmarks & favorites located in my user profile first.
"Code Error:0xc004E003. Description: The Software Licensing Service Reported That License Evaluation Failed"
Apr 7, 2011When i try to activate my copy of windows 7 ultimate i get the following error message: "Code error:0xc004E003. Description: The Software Licensing Service reported that license evaluation failed"
Here are some basic info of my pc:
450 @ 2.20GHz, x64 Family 6 Model 22 Stepping 1 Processor Count: 1 Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Ultimate , 32 bit Processor: Intel(R) Celeron(R) CPU RAM: 1014 Mb Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb Hard Drives: C: Total - 152624 MB, Free - 18127 MB; Motherboard: ASUSTeK Computer INC., P5KPL-VM-MUSTEK-SI, x.xx, MS1C92D09200022 Antivirus: avast! Antivirus, Updated
Generate The Requested Reports In The Sticky?
Nov 18, 2011Want to generate the reports in the sticky (attacking folders as a zip). I've done the first report and have the folder (Windows_N6_BSOD). How do I ZIP this exactly?
The third step (Start>perfmon/report). I type this into the search bar in start and don't get anything? (I have Windows 7).
I want to be able to put all the info as requested as I'm getting a few random crashes on startup (including the occasional BSOD). But obviously I want to be able to give the correct info to the experts on here.
Password Requested Each Time I Try To Login To Hotmail
Mar 1, 2012For some unknown reason each time that I try to login to my Hotmail account I am asked for my password. Up to two days ago I could instantly access my Hotmail account from the weblink in Bing or from a link that I have saved to my Favorites. The only change to my computer that I can think of is that I have in the days prior to this change downloaded and used the new version of CC Cleaner to delete tracking cookies, temp files, etc.. I never use it for doing anything to the registry.
View 2 Replies View RelatedPrinter Doesn't Print Anything Requested By Laptop
Jul 24, 2011my laptop runs windows7 and is connected by wireless to my home PC running windows XP. The network printer is a brother DCP-145C and up until 2 weeks ago was prinitng from both computers well. My laptop recognises the printer but the printer does not print anything requested by the laptop. The PC prints perfectly. Sharing appears to be set up correctly.
View 3 Replies View RelatedWindows Protection Could Not Perform Requested Operation
Jan 25, 2012I was infiltrated by a virus , have my pc back up and running after trying everything I have been suggested to do , then finally combofix got it cleared up. however my security flag flashes off for a split sec, then back to on. had eset and malwarebytes. can't run sfc scan get "Windows Protection could not perform the requested operation".
View 2 Replies View RelatedNo Email Program Associated To Perform Requested Action
Nov 3, 2012I am trying to send my work to my teacher from my laptop but every single time a pop-up comes on my screen saying,"There is no email program associated to perform the requested action.install an email program,or if one is already installed, create an association in the Default Programs control panel."
View 4 Replies View RelatedFacebook 'The Page You Requested Was Not Found' When Viewing Profile
Feb 19, 2012This has been happening for a few weeks now where whenever I or anybody else tries to view my facebook profile, the message' The page you requested was not found.You may have clicked an expired link or mistyped the address. Some web addresses are case sensitive.' comes up.As well as this, facebook chat does not work from time to time and simply shows a triangle ! sign instead. I've tried to look everywhere to resolve this but nobody seems to have the same issue.
View 2 Replies View RelatedSFC / Scannow Stops At 69 Percent - Could Not Perform Requested Operation
Nov 20, 2012In the beginning of the year I got the infamous malware that infected many PC's worldwide (can't remember the name) and got my action center completely destroyed. I eventually fixed it, by adding the Security Center service that was gone, but one issue still remains: the action center system tray icon is greyed out, and impossible to turn back on!
I searched online, and the most common solution I've found was to run the sfc /scannow command. So I did, and for some reason it stops at 69% and after about a minute stuck at that number it says: "Windows Resource Protection could not perform the requested operation" I tried multiple times, but the same error happens every time. How can I fix this error, without re-installing the OS? Or is this only solved that way?
Fraps - Application Requested Runtime To Terminate It In Unusual Way
Aug 30, 2012So today I decided to record some gameplay with fraps, but once I was done recording a message popped up saying:
"The application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
I've looked this error up, I have reinstalled the C++ redistributable packages, and it does not work. Basically whenever I am finished recording a fraps video, or even if I navigate (via Windows Explorer) to the directory in which the video files are located, I will get this error. As well as playing or moving the files. I have uninstalled and reinstalled a newer version of fraps, but still, no go.
"unable To Execute Files", "CreateProcess Failed -Code 740"
Apr 27, 2012I am running Microsoft Windows 7 Home Premium service pack 1,64 bit and having problems opening a downloaded file. The Wizard seems to download okay, it is when I attempt t open the file the problems start. The message appears stating:
"unable to execute files", "CreateProcess Failed -Code 740" "The requested Operation Requires Elevation"
I have tried closing Microsoft FireFox firewall And to run as administrator, even compatibility mode, but nothing works.I sometimes get a message:"Application Error"-"The Application was unable to start correctly (oxcoooooo5)
Resource Monitor
Jun 8, 2009How to Open Resource Monitor in Windows 7 ?
View 0 Replies View RelatedResource Monitor Has One Of Hdd Always At 100% Active
Nov 12, 2011I keep putting the drive offline because im wary of having it always active. It may have something to do with avast antivirus because thats the image thats listed next to the files in those drives. I checked with avast and it doesnt appear to be running any scans and theres no way I can find to have it skip that drive. Also when I put the drive back online the activity is at 0 but eventually goes back to 100% and I can hear the drive activity.
View 9 Replies View RelatedDevice Or Resource Is Not Responding
Nov 8, 2012message on my laptop "InternetExplorernot working problem found" "Your computor appears to be configured but the device or resourse [asus.msn.com]is not responding"
what does it mean?
Desktop Window Manager Resource
Jan 5, 2012[code] On checking my event log after some slow response, I noticed that I am getting: Desktop Window Manager is experiencing heavy resource contention.Reason : Graphics subsystem resources are over utilised.I am using Windows recommended settings. Mozilla on the main screen and outlook express on the slave screen.Ran the usual clear temp files and ran malwarebyes and superantispyware scans.I am not playing any games or music, just browsing one website (secure) and outlook express, why am I getting resource contention on the Desktop Window Manager?
View 2 Replies View RelatedPC Not Accessible, You Might Not Have Permission To Use This Network Resource
Mar 9, 2012[pc name] not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The specified server cannot perform the requested operation.Lately we have had problems with all Windows XP pcs not being able to access all the shared folders on one Windows 7 pc on the lan.It is intermittent. I cannot think of what has changed recently.It is temporarily fixed by a reboot of the Win7 pc, but since it is a server in an office environment, this can be difficult to do middle of the day.Turning firewall software off on host and client has no effect.Network sharing profiles are never changed as issue comes and goes.Unsharing a folder, and resharing it has no effect.The Win7 pc does show up as a networked computer and all are in the same workgroup.All Windows 7 pcs on the lan can access the shared folders when all the XP pcs cannot.Another Win7 pc on the lan is nearly an identical hardware build with same firewall and never has a problem.
Network sharing options for current profile:
network discovery: on
file printer sharing: on
public folder sharing: on
media streaming: on
file sharing connections: 40-56 bit encryption
password protected sharing: off\
[code]....
