"unable To Execute Files", "CreateProcess Failed -Code 740"

Apr 27, 2012

I am running Microsoft Windows 7 Home Premium service pack 1,64 bit and having problems opening a downloaded file. The Wizard seems to download okay, it is when I attempt t open the file the problems start. The message appears stating:

"unable to execute files", "CreateProcess Failed -Code 740" "The requested Operation Requires Elevation"

I have tried closing Microsoft FireFox firewall And to run as administrator, even compatibility mode, but nothing works.I sometimes get a message:"Application Error"-"The Application was unable to start correctly (oxcoooooo5)

ADVERTISEMENT

Remote Procedure Call Failed And Did Not Execute

Aug 23, 2011

When I insert USB Drive, the folder just load but its not opening at all, plus all the icon was gone. I have done scans for both malware and antivirus but none found. The only solution for this is when I remove the drive and restart the pc. I also experience this when sorting items without the usb inserted. After this problem I often get "The remote procedure call failed and did not execute." Which restart is the only option.

View 3 Replies View Related

All System Files Have Been Moved To Windows.old Dir / Result: Failed. Error Code = 0x490

Jun 14, 2010

I�m running a single Windows 7 Ultimate x86 OS on my laptop and it used to work very well �till earlier today once I get back home trying to use my computer as usual to find out that it always runs the startup repair after showing the words �windows is loading files� instead of starting windows normally. Once the diagnostic & repair process is done it tells me that Startup Repair cannot repair this computer automatically. When I view the details I get the following under Root cause found:

Boot configuration is corrupted.
Repair action: Partition table repair.
Result: Failed. Error code = 0x490

After many times doing the previous repairs with no result I went to Command Prompt in order to check my system drive to find out that both �Windows� & �Program Files� directories are not existed there anymore. Instead, there�s a �Windows.old� directory that contains those 2 system directories as well as �Users� & �PerfLogs� directories plus the �autoexec.bat� & �config.sys� files. Sure there�s noway to use the system restore tool or anything else even using my Windows boot DVD. Still can�t use the cmd commands single handedly to fix this.As I said earlier I have never faced such problem before plus I have no idea how to regain my windows since I can never format my system drive as I need to backup all the files, settings, bookmarks & favorites located in my user profile first.

View 9 Replies View Related

Error : The Remote Procedure Call Failed And Did Not Execute

May 28, 2012

I keep getting the The Remote Procedure Call Failed and did not execute error when opening my control panel or windows explorer on Windows 7.I've made sure the RPC is on and that the second service is on manual so that isn't the problem.

View 1 Replies View Related

ERROR MESSAGE: The Remote Procedure Call Failed And Did Not Execute?

Jun 27, 2009

I have just managed to crash Windows Explorer and have receivedthe following error message (no error code provided);"The remote procedure call failed and did not execute"Whenever I try and double left mouse click on computer, control panelor any other windows processes I receive the above error message.I was wondering if any other members have received this sameerror message?

View 6 Replies View Related

Unable To Install .net Framework 4, Setup.exe Does Not Execute?

Oct 22, 2011

I am having trouble installing .net framework 4. I had it before but when installing security updates it would fail, so I thought I would just uninstall and reinstall it again. But now I can no longer install it again. When ever I double click the setup.exe it does not run. It doesn't do anything.Here is what I did before coming to this forum:Virus scan: microsoft security essentials, ad-adwareSFC scan: no errorscheckdiskregister and unregister windows installeruse many microsoft fix it that includes repairing windows update, msi, etc

View 1 Replies View Related

BSOD After "Remote Procedure Call Failed And Did Not Execute"

Nov 20, 2011

-Windows Home Premium x64

-Windows Vista initially installed; Dell provided a windows 7 Installation CD once it came out.

Hardware was bought ~December 2009. Installed Windows 7 once in 2010 and once earlier this year.

When I tried to make the System Health Report, it came up with "The system cannot find the specified path." I'm currently running everything from Safe Mode with networking since if I tried to boot up regularly, the system locks up with little CPU usage, explorer.exe fails and I get the error "The remote procedure call failed and did not execute" when I try to open any folder, the computer locks up again before finally BSOD.

View 7 Replies View Related

"The Remote Procedure Call Failed And Did Not Execute"

May 16, 2009

I can't seem to open any folder using Explorer in Windows 7 RC b7100, as it fails with the above error. This happened after Explorer stopped picking up metadata on files, and so I killed and restarted explorer using Task Manager. Files and folders on my Desktop still show up, and files still open in their respective applications, but folders won't show, as with the error. Happens with any local folder.I can't find anything on Google. I haven't touched any Explorer settings, and I'm not interested in an Explorer alternative. I can restart, but this has happened once before, so I'm thinking it'll happen again after a restart.

View 6 Replies View Related

"The Remote Procedure Call Failed And Did Not Execute"

Oct 25, 2012

I have this Video file, (AVI, ~12GB) that I cannot in any way modify. I can't rename it, (If I do, windows explorer crashes) I can't move or delete it (When I try it gets stuck on "Preparing" ) But I can modify all my other files. Also, when I try this, if I don't end explorer.exe's task, and close the recycling window, my hard drive goes under extreme stress and explorer uses a total I/O of over 100MB/s! It is very frustrating, and I need the space. Also, when I try to drag and drop a file onto a program, (Vegas for example) it freezes the program and the I/O spikes, and stays high. Then, when I end explorer.exe, it loads into it.

EDIT: Now my hard drive is maxed out ALL THE TIME! My computer is running slow, My Resource monitor won't load any content (Processes using disk, memory, etc) I'm positive I don't have a virus, nothing like this has happened before?"The remote procedure call failed and did not execute"

View 8 Replies View Related

Unable To Execute File In Temporary Directory Setup Aborted Error 5

Dec 12, 2012

i just downloaded dishonored pc game but it comes that unable to execute file in temporary directory setup aborted error 5

View 2 Replies View Related

Error Calling Shell Execute. Error Code: 5?

Jul 31, 2012

i downloaded a disk image iso file for one of my programs. i mounted and ran the image. the setup.exe file runs fine but when i make any selction i get a "error calling shell execute. error code: 5" message and the program terminates.i tried it on a xp machine and also burned a cd but am still getting the error message

View 1 Replies View Related

Restore Failed Error Code = 0x45

Jan 22, 2012

Trying to restore Emachine E28 laptop.After last install disk runs I receive the following message:Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)Have tried almost everything I can think of but no results.

View 5 Replies View Related

Connection Failed: Error Code 23 - Raidcall

Nov 7, 2012

(I was going to post this in the software section, but I assumed since it pertains to the network portion of the application and that I can connect through a VPN, that the problem is LAN Network oriented)I recently installed the software Raidcall (RaidCall-100% FREE Group Communication Software- IM, Group Communication and Voice Chat) which is a program designed to be a cross between Skype and Ventrilo. I avidly registered and the process went smoothly. That was all until I came up to login screen where after entering my information, I got the following error: Connection Failed. please try again later (Error code:23). Does this have something to do with Cyclic Redundancy Checking? That's the only information I could come up with. I've done as much research as I can think of, sent them an email with lots of information (no response as to the answer yet), and also asked on their forums but no dice.

Background information (I can provide more if needed)

- On a University Campus ( Technical Information | IT | Indiana Wesleyan University )

-I"m connected directly through to their wall. I"ve also tried swapping out my own cables to no avail.

- Have done an Error Checking Check for both drives (for CYC relation - which I think it may be the culprit (I"m not tech savy though hence my forum post)

- I CAN connect to it through a VPN (Hotshield) - obviously I don't want to have this be my way of connecting through it because I want to use Raidcall while playing (World of Warcraft) and it gives me horrible latency.

- I've called my IT support here at school, and they didn't think it would be something on their end. Although the guy on the other end did not sound intelligible at all.

View 2 Replies View Related

DllRegisterServer Failed With Error Code 0x8002801c

May 24, 2011

I received an error message- The module "mswinsck.ocx" was loaded but the call to DllRegisterServer failed with error code 0x8002801c.

View 1 Replies View Related

Restore Failed - Error Code 1005

Nov 23, 2011

I'm trying to restore Windows 7 on my computer (I'm currently using Ubuntu 11.10), and I keep getting Error Code 1005. I've tried everything, and nothing.

View 1 Replies View Related

DllRegisterServer Failed With Error Code 0x8002801c

Jul 9, 2012

I can't launch windows media player with error message DllRegisterServer failed with error code 0x8002801c.

View 1 Replies View Related

ShellExecuteEx Failed; Code 170 The Requested Resource Is In Use?

Nov 29, 2012

i cannot install any .exe file. every time shows an error message ''shellExecuteEx failed; code 170 The requested resource is in use'

View 2 Replies View Related

Dll Registerserver Failed Error Code 0x80020009

Jan 21, 2013

I have this issue dll registerserver failed error code 0x80020009 when I register a dll in win7 64bit.

View 1 Replies View Related

Cocreateinstance Failed - Code 0x80040154 Class Not Registered

Feb 26, 2011

This popped up all of a sudden when I went to windows update.
"Cocreateinstance failed; code 0x80040154 class not registered".

System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, v.721, 64 bit
Processor: AMD Phenom(tm) II X4 940 Processor, AMD64 Family 16 Model 4 Stepping 2
Processor Count: 4
RAM: 3839 Mb
Graphics Card: ATI Radeon HD 3300 Graphics, 384 Mb
Hard Drives: C: Total - 476937 MB, Free - 375796 MB; D: Total - 76308 MB, Free - 30433 MB; F: Total - 57295 MB, Free - 26892 MB;
Motherboard: BIOSTAR Group, TA790GX 128M, , None
Antivirus: Microsoft Security Essentials, Updated and Enabled

View 2 Replies View Related

Backup Failed At 57% Several Times With Error Code 0x81000039

Jan 20, 2012

I have been trying to do a backup with system image since Jan 15th on an Iomega 1TB external HD. Tried about 7 times and each time the backup fails at 57%. The message I receive with each failure is as follows- "Windows backup encountered an error when accessing the remote shared file. The semaphore timeout period has expired. Details: Error code 0x81000039" I chatted with a tech from my external HD manufacturer and he finally told me that the problem was with my OS and settings. I tried doing a backup on a different external HD and still failed at 57%. I have no idea which remote shared file the program is looking for. I have a home network and one other computer. That laptop was turned on so if it was looking for a file there it was available. The tech suggested that I turn off my antivirus and firewall and if I was concerned about intrusion to disconnect from the internet. Did that and the backup still failed. I have the same setup on desktop and laptop Windows 7 SP!, Vipre antivirus and firewall, and I was able to do a backup on my laptop. Another slight problem is when I have the Iomega HD running my computer will freeze randomly. For this reason I don't keep it on all the time but just turn on for a monthly backup. I was able to do one initial backup on that HD with no problem. I was told to look at the windows backup log files but they all have a .etl extension and I do not know how to open them to see if the logs give me any idea what file it is hanging up on.

View 7 Replies View Related

Error Code 315 - Printer Spooler Operation Failed

Feb 4, 2013

I'm getting this error, but I can still print locally and from the network.

Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 2/4/2013 8:15:49 AM
Event ID: 315
Task Category: Sharing a printer
Level: Error
Keywords: Classic Spooler Event,Printer
[Log] ........

View 4 Replies View Related

Windows Update Failed - Code Error 8000ffff

Jan 14, 2013

about a month I have a problem with the updates of windows 7 professional 32 bit. When I turn on the PC, Windows tries to install an update, it hangs at 35% and the pc restarts 3 times before using it. after, if I click on search updates, I have error code 8000ffff. I tried microsoft fixit but I have not resolved.

this is the file of MGA.

Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0

[Code].....

View 3 Replies View Related

Restore Failed Error Code = 1117 In Windows 7 Home

Apr 19, 2011

I have a problem with restore failed error=1117 in win 7 what do I need to do Also It's says About the NLS data is missing or corrupt

View 4 Replies View Related

"Final Result: Installation Failed With Error Code: (0x80070643)

Jan 1, 2012

I am trying to install Microsoft Network Framework v.4 (x64) and I keep getting error "Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation" (Elapsed time: 0 00:01:01)." The exact log file is attached: Code: OS Version Information:

OS Version = 6.1.7601, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Ultimate Edition Service Pack 1
OS Version Information

[code].....

View 3 Replies View Related

HDD Failed Now Unable To Reinstall Applications And Games

Nov 1, 2011

Let me first accurately describe what happened. So one of my HDDs failed (I got a new one, a Western Digital Caviar Blue 640gb). I had lot's of applications and games installed on the failed HDD, but nothing important. Now, when I go to re-install those games/apps again, some of them act as if they were installed, and attempt to uninstall (the hard drive failed so it was unable to uninstall the correct way). So, it will not let me re-install those programs, until I uninstall them. They are unable to uninstall because they cannot find "Drive D:," which is the failed drive, and they are probably still somewhere in my computer's registry, but the install directories are gone with the failed drive. How to reinstall my programs again. I am on Windows 7 Ultimate 64 bit.

View 4 Replies View Related

Unable To Solve Code 43?

Apr 22, 2011

i want to fix my problem code 43

View 2 Replies View Related

Windows Failed To Start, Unable To Run System Repair

Jan 21, 2013

I have a Samsung netbook (n145) which has had a few issues starting up over the past couple months - it would prompt to run chkdsk before booting, I would let it run, and it would boot. However, yesterday I got the 'windows failed to start - a recent hardware change may be responsible' error message, and giving the option to try starting windows normally (which fails: there is a flash of BSOD and then screen goes black, and computer restarts, arriving at same 'failed to start' error). The other option is to run system repair, which also does not work: it takes ages to bring up a dialog box that searches for errors, but I have let this run for hours and it remains stuck. Tapping f4 to bring up samsung recovery also results in a stuck screen. Tapping f8 to boot to safe mode does not work either.

My main concern is having a working computer, and I can't really afford costly repairs or a new netbook. I got this one used about 1 1/2 years ago and it has no cd drive/OS boot disk (windows 7 starter came already installed). What should I do? Can I fix the hard drive, or should I replace? I am not at all technically skilled and have limited knowledge but an endless capacity to learn. I called samsung and they suggested I replace the hard drive to the tune of $100-$300 for parts alone, which is too expensive for a $100 netbook.

View 3 Replies View Related

DTMB BDA TV USB Unable To Start Code 10

Dec 11, 2012

I've found to above device in device manager under Sound, Video, and Game Controllers since I've connected my iiyama Pro Lite PL2780H series monitor.It has no built in TV tuner, but does have a built in USB2 hub which appears to be working OK.The only other thing I can see in the driver is:

DTMB BDA TV USB
Manufacturer ALTOBEAM
Can't Start code 10

I've used the iiyama drivers but Windows 7 says " These are not the droids, sorry drivers .inf file, you are looking for"

View 1 Replies View Related

Code 43 - Unable To Connect Printer?

Sep 30, 2012

i am unable to connecting printer

View 2 Replies View Related

Get Files From A Failed HDD?

Apr 18, 2012

've used this hdd for about 4 years..i knew it's gonna fail..now my pc doesnt see it..is there any chance that i can get files from it

View 8 Replies View Related

Code 8024001F, Unable To Connect To Internet?

Sep 22, 2012

I've recently changed hard drives as the last one failed. I've got windows home premium running fine but it won't connect to the internet.It says 'plug an ethernet cable into this computer', i press the button to 'keep trying to fix problem' and it comes up with 'a network cable is not properly plugged in or may be broken.All i want is to connect to the wireless internet at home but it won't pick up any??

View 1 Replies View Related

Unable To Open Control Panel Options - Server Execution Failed

Jan 6, 2012

I am unable to open "Computer", "Control Panel", "Devices and Printers" or any of the other options when I click on the start icon in the task bar. I receive the error message "Server execution failed" I have Windows 7 operating system.

View 3 Replies View Related

"Code Error:0xc004E003. Description: The Software Licensing Service Reported That License Evaluation Failed"

Apr 7, 2011

When i try to activate my copy of windows 7 ultimate i get the following error message: "Code error:0xc004E003. Description: The Software Licensing Service reported that license evaluation failed"

Here are some basic info of my pc:

450 @ 2.20GHz, x64 Family 6 Model 22 Stepping 1 Processor Count: 1 Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Ultimate , 32 bit Processor: Intel(R) Celeron(R) CPU RAM: 1014 Mb Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb Hard Drives: C: Total - 152624 MB, Free - 18127 MB; Motherboard: ASUSTeK Computer INC., P5KPL-VM-MUSTEK-SI, x.xx, MS1C92D09200022 Antivirus: avast! Antivirus, Updated

View 1 Replies View Related

Browsing Web BSOD Error Code Unable To Find

Jan 20, 2013

-System -Provider[ Name] Microsoft-Windows-Kernel-Power[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4} EventID41Version2Level1Task63Opcode0Keywords0x8000000000000002-TimeCreated[ SystemTime] 2013-01-20T05:40:27.336841800Z EventRecordID241661Correlation-Execution[ ProcessID] 4[ ThreadID] 8 ChannelSystemComputerShelby-HP-Security[ UserID] S-1-5-18
-EventDataBugcheckCode278BugcheckParameter10xfffffa8009b434e0BugcheckParameter20xfffff88000e5340cBugcheckParameter30x0BugcheckParameter40x2SleepInProgressfalsePowerButtonTimestamp0

[code]....

and this is the code from the blue screen itself stop 0x00000116 (0xFFFFFA8009B434EO, 0x000000000000000?, 0x0000000000000002) i took a picture of it with my camera but missed that last digit thus the ? below that on the screen was this

atikmpag.sys - address FFFFF88000E5340C base at FFFFF88000E4C000. DateSt?? 4da507aa

im lost i tried searching these codes and some came up with random stuff (some of it worried me like the remote access stuff) and others dont seem to exist at least in a googleable database?

View 1 Replies View Related

Windows Unable To Update: Error Code : 8007065E

May 20, 2012

I have attempted to update windows 7 with the :Security update for windows 7 for X64 systems (KB2619339) with only failed results.the error code is : 8007065E I have CBS logs WINDOWS resource protection found corrupt files but was unable to fix some of them.

View 2 Replies View Related

Error Code 6 - Setup Was Unable To Complete The Installation

Nov 1, 2009

i recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..

so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?

View 11 Replies View Related

RW2 Files Failed To Display Or Open

Feb 8, 2012

I have been working with RW2 files on this PC without problems for 6 months and all was normal last night when I shut down as normal. This morning I switched on to continue my work and the window with RW2 files showed just blank icons. I clicked on one and got the message "unable to open this file type, no supporting program" or similar, usually it opens a preview window at the side and will open in Windows photo viewer with a double click, but now nothing. JPG files still display and work fine and all the RW2 files open normally in lightroom 3.6 when I open that. I rebooted but the problem persists. I then looked at system restore and there were no restore points for this month and it gave a list of 5 programs it would erase, which I had updated/installed a few days earlier so I decided to look for another way first (I have very bad internet so do not want to have to download those again). Everything has worked fine with those updates for several days so I suspect it has nothing to do with them.

View 2 Replies View Related

Unable To Install Windows 7 Updates, Error Code 80071A91?

Jan 12, 2013

I keep getting this error, and following Error message when you try to install a Windows update, a hotfix, or a service pack after you perform System Restore in Windows Vista: "0x80071A91" and removing files manually did not resolve the problem[CODE]

View 5 Replies View Related

Webcam Error - Capture Graph Failed To Render / Unable To Enable Video Preview

Nov 26, 2011

I have a webcam problam in my Emachines e727. I got some errors.

- Capture graph failed to render
- Unable to enable video preview
- Unable to start video capture

My Cam Sonox tecnology Sn-9c232BJG.

View 3 Replies View Related

Error Code 80070643, Unable To Update Or Perform System Restore

Oct 27, 2012

I am trying to rectify the error with windows update. Everytime I try to update it tells me it is checking for updates...Then "To check for updates, you must first install an update for Windows Update. Your automatic Updating settings will not change." I click Install now and get "Window could not search for new updates"An error occured while checking for new updates for your computer. Error(s) Found Code 80070643 Windows Update encountered an unknown error.

This problem first came to light a year ago when I downloaded a windows update that was corrupt.It forced the computer to loop the autocheck upon boot and could only be started in safe mode or by canelling the check.After looking through the forums I found an interim fix which disabled the autocheck and since have always recieved the message upon restarting "Autocheck program not found".I naturally thought this issue would be resovled in the next update and or a future fix.I had to go away for work at the start of this year and when I got back and windows updated it still had the autocheck message.Recently I have been unable to update at all due to the aforementioned error. The simplest soultion it would seem would be to do a system restore, this I have tried however every possible point seems to have a corrupt file on it.I ran a scan using Malwarebytes and found nothing.I don't want to format as the programs came pre installed and that would mean taking to back to the shop.

View 9 Replies View Related

System Files Integrity Check And Repair - Result Failed

Jan 13, 2013

I've had trouble with my machine starting. I've done all the advice the 7 Forum suggests, running start up 3 times...etc., and it will work for a day or two, then not start. Then if I hit the reset button a couple of times, it will go into the start up repair and I end up with this message:

Repair Action/ System files Integrity check and repair
Result Failed / Error code = 0x490
Time Taken / 700863 ms

I've run sfc from an elevated window and it says everything is fine.

View 1 Replies View Related

Copy Or Move Files Using Right Click Reg Code?

Sep 12, 2010

Hope someone can help with this as I am very frustrated trying to get it to work correctly!

I currently have a reg file that moves a single file to my reg hack folder.

[code]...

View 3 Replies View Related

Trying To Use Batch Code To Parse And Archive Log Files

Nov 10, 2011

I have a quick question about compressing a bunch of log files that have specific years at the end of their file names.[code When the above is executed, it looks for an "archives" folder. If it's not there, it tries to create it as a place to store the yearly ZIP archives (notice the years are in bold in the above list of example files). Beyond that, it just goes through steps of reading the file names and parsing the name itself if and only if they're of type *.log. As you can see, I'm still working on this but wanted to understand why "ECHO is off." keeps repeated during runtime... I thought I had it set to OFF. It has me stumped.

View 9 Replies View Related

Migrate Files And Settings From A Failed Vista Laptop's Hard Drive?

Feb 9, 2012

How can I migrate files and settings from a failed vista laptop's hard drive to a new windows 7 laptop?

View 2 Replies View Related

Batch Code To Read, Then Move Files From One Folder To Another?

Sep 27, 2011

I need to read several .txt files and search them for a specific string, lets say "key1" and "key2." If the file has key1, then it needs to be moved into directory1. If the file has key2, then it needs to be moved to directory2. There's no telling ahead of time what line the string is going to be on, so I'm guessing I could use "Find" to search for the key? Then how do I loop through all the files, read them, then sort them into the different directories?

View 1 Replies View Related

ADVERTISEMENT