Get Files From A Failed HDD?
Apr 18, 2012've used this hdd for about 4 years..i knew it's gonna fail..now my pc doesnt see it..is there any chance that i can get files from it
View 8 Replies
ADVERTISEMENT
RW2 Files Failed To Display Or Open
Feb 8, 2012I have been working with RW2 files on this PC without problems for 6 months and all was normal last night when I shut down as normal. This morning I switched on to continue my work and the window with RW2 files showed just blank icons. I clicked on one and got the message "unable to open this file type, no supporting program" or similar, usually it opens a preview window at the side and will open in Windows photo viewer with a double click, but now nothing. JPG files still display and work fine and all the RW2 files open normally in lightroom 3.6 when I open that. I rebooted but the problem persists. I then looked at system restore and there were no restore points for this month and it gave a list of 5 programs it would erase, which I had updated/installed a few days earlier so I decided to look for another way first (I have very bad internet so do not want to have to download those again). Everything has worked fine with those updates for several days so I suspect it has nothing to do with them.
View 2 Replies View RelatedSystem Files Integrity Check And Repair - Result Failed
Jan 13, 2013I've had trouble with my machine starting. I've done all the advice the 7 Forum suggests, running start up 3 times...etc., and it will work for a day or two, then not start. Then if I hit the reset button a couple of times, it will go into the start up repair and I end up with this message:
Repair Action/ System files Integrity check and repair
Result Failed / Error code = 0x490
Time Taken / 700863 ms
I've run sfc from an elevated window and it says everything is fine.
Migrate Files And Settings From A Failed Vista Laptop's Hard Drive?
Feb 9, 2012How can I migrate files and settings from a failed vista laptop's hard drive to a new windows 7 laptop?
View 2 Replies View RelatedAll System Files Have Been Moved To Windows.old Dir / Result: Failed. Error Code = 0x490
Jun 14, 2010I�m running a single Windows 7 Ultimate x86 OS on my laptop and it used to work very well �till earlier today once I get back home trying to use my computer as usual to find out that it always runs the startup repair after showing the words �windows is loading files� instead of starting windows normally. Once the diagnostic & repair process is done it tells me that Startup Repair cannot repair this computer automatically. When I view the details I get the following under Root cause found:
Boot configuration is corrupted.
Repair action: Partition table repair.
Result: Failed. Error code = 0x490
After many times doing the previous repairs with no result I went to Command Prompt in order to check my system drive to find out that both �Windows� & �Program Files� directories are not existed there anymore. Instead, there�s a �Windows.old� directory that contains those 2 system directories as well as �Users� & �PerfLogs� directories plus the �autoexec.bat� & �config.sys� files. Sure there�s noway to use the system restore tool or anything else even using my Windows boot DVD. Still can�t use the cmd commands single handedly to fix this.As I said earlier I have never faced such problem before plus I have no idea how to regain my windows since I can never format my system drive as I need to backup all the files, settings, bookmarks & favorites located in my user profile first.
"unable To Execute Files", "CreateProcess Failed -Code 740"
Apr 27, 2012I am running Microsoft Windows 7 Home Premium service pack 1,64 bit and having problems opening a downloaded file. The Wizard seems to download okay, it is when I attempt t open the file the problems start. The message appears stating:
"unable to execute files", "CreateProcess Failed -Code 740" "The requested Operation Requires Elevation"
I have tried closing Microsoft FireFox firewall And to run as administrator, even compatibility mode, but nothing works.I sometimes get a message:"Application Error"-"The Application was unable to start correctly (oxcoooooo5)
Tried To Restore They Have Failed?
Mar 13, 2011I have restore points being created but on the occasions that I've tried to restore they have failed
View 3 Replies View RelatedAn Add-on For This Website Failed To Run?
Sep 8, 2011On a couple of websites I visit I get this pop up...." An add-on for this website failed to run "After a few seconds the pop-up disappears. This has been happening for about a month now, and it does not happen on every website I visit. Can someone tell me what it means and how to stop it?
View 14 Replies View RelatedDNS Lookup Failed
Jul 1, 2011I just installed DSL in my house. It's all hooked up and when I try to access it with my laptop, both wired and wireless, I get DNS Lookup Failed. I've done some of the common suggested fixes:Reset the modem and router Manually set the DNS (using Google) So, I'm at a loss. I know the computer itself is fine, as I've used it on other networks. Admittedly, I'm not 100% certain the DSL is properly working, but I will speak with my ISP tonight to make sure that it isn't the issue.
View 6 Replies View RelatedSFC / Verification Of Known DLL Failed
Mar 7, 2011One morning my Windows 7 x64 system failed to boot. It halts with a BSOD: Verification of a KnownDLL failed
System Repair, System Restore, Last Known Good Config and Safe Mode don't work. I've installed another Windows 7 on a second HDD and would like to fix the first install. Hardware: Q9450, 8 gb RAM, 1 tb HDD. The Windows install is less than two years old.
I run sfc but I can't find the log. It's not in F:WindowsLogsCBSCBS.log (or C:WindowsLogsCBSCBS.log) How do I find out what's wrong?
>sfc /scannow /offbootdir=f: /offwindir=f:windows
Beginning system scan. This process will take some time.
Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log
DNS Lookup Failed
Jun 22, 2011i just tried yesterday to install a Kapersky Lab 2012 in my netbook and while installing it remove my MSE,i change from MSE to Kapersky because i was not satisfied with the results of MSE when someone inserted a 4gb usb stick and i suspected it right away it contains malwares,while scanning i saw a lot of ".exe , .pif" ..and i know those wer not part of her files because she didnt even care what was it and the results where NO THREAT detected ..my virus defintion is always updated and i also use a malwerbytes to recheck the scanning,but same results. >can anyone tell me why this WELL known scanners did not detect it?and now after installing a Kapersky..when trying to activate a 30 day trial first,it says "FAILED" and when i look in my status of my network it works fine. and i tried in a browser i receive now a "DNS look up fail bla bla" i tried Chrome and Firefox and i suspected i was being contaminated with that usb stick..so i used the Kapersky Virus Removal Tool 2010 and Dr.Web..which was suggested in my previous thread.it detected a few virus and hacking tools which is "CloseApp.exe"..but after 3 hours of scanning..still i coundnt connect to any website,but my network status is fine. i can send and receive packetdatas..also run the ping 127.0.0.1 and ipconfig but everything was fine.
View 4 Replies View RelatedHd6850 Failed To Oc At All?
Sep 11, 20110 n failed. thing is all i had done was up the core clock by 15mhz in 3 steps of 5mhz.playing deus ex it was runnin ok but within a few mins of bfbc2 online it crashed. i had to hit the reset button on my case. couldnt alt tab or cntrl,alt, delete.i would of thought it would oc more as the reviews ive read mostly say its a good overclocker.
View 7 Replies View RelatedWindows 7 Failed To Start?
Aug 2, 2011A few days ago, I started having trouble with Dell Latitued D800, Windows 7. First, Windows would not boot up. I was able to boot windows using the F12 option. When Windows loaded, the screen display had shrunk and was centered with a black perimeter. I contacted the guy that sold me the computer and he suggested that I check the boot sequence for the boot issue. That worked fine. To resolve the resolution issue, I was advised to select the "last known good configuration" from the F8 options. After I did that, the Windows Error Recovery Screen. A Recent Hardware Or Software Change May Be The Cause. I attempt to start windows normally.
View 7 Replies View RelatedWindows 7 Failed To Start?
Dec 15, 2011When I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives
View 2 Replies View RelatedSystem Restore Failed
Mar 28, 2012I recently saved over my Fallout 1 savegame and I want the old one back, I tried system restore but it failed due to an unspecified error, hinting to turn my antivirus off - which didn't work. I just want to old save file back, is there a program that can do that?
View 7 Replies View RelatedSystem Restore Failed?
May 15, 2012My DVD drive disappeared so I want to do a system restore to get it back, but it fails and Windows tells me that it could not access a file. I have Zone Alarm and Malwarebytes, and I turned them both off, but it still fails.If there is no quick fix for this I would at least like to lock in my system restore snapshot so it doesn't get overwritten by a new one.
View 2 Replies View RelatedWindows Failed To Start
Jun 9, 2012When I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives!Also says The boot selection failed because a required device is inaccessible.
View 1 Replies View RelatedWindows 7 Updates Failed
Jul 15, 2012I have been trying for the past 3 nights to find a way to fix whatever is the reason for my latest windows updates continue to fail. There are 3 of them trying to be installed: KB2655992; KB2691442; KB2719985; I have tried the troublesshooting, added anti-malware, cleaned whatever I could or know how to clean and they still wont update.
View 2 Replies View RelatedUpdate KB2757638 Failed
Feb 13, 2013Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4024 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1820 Mb
Hard Drives: C: Total - 226373 MB, Free - 123192 MB;
Motherboard: Gateway, SJV50MV
Antivirus: PC Tools Internet Security Anti-Virus, Updated and Enabled
I've been having some problems installing KB2757638 Windows update for weeks now. Tried troubleshooting but I always get the same result.... installation is failed.
Windows Failed To Load
Jan 23, 2011statement of windows failed to load because a critical system driver is missing or corrupt. It said for me to insert disk, or contact administrator however, I have no disk
View 3 Replies View Related[DESKTOP] Failed Boot?
Mar 14, 2011I am running a desktop with Windows 7 Pro 32-bit. When I first power it on the normal BIOS posts and then Starting Windows just hangs, no 4 colored orbs that turn into the Windows logo. I can hit the reset button and it boots and runs fine. I have tried the Launch Startup Repair after the reset button but doesn't seam to do anything
View 1 Replies View RelatedFailed To Backup Windows 7
Feb 17, 2011I am trying to make an image backup of my hard drive This drive is approx 100 GB used, On the windows 7 backup recovery I select the Image backup On the Create a system image box enabled On a hard disk Iomega HDD ( J 818.48 GB free, After I press next This is the message I get. The Backup failed, There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes to be backup up, the minimum required disk space for shadow copy creation.
View 2 Replies View RelatedWindows 7 Failed To Start?
Sep 14, 2012I have had problems booting up my Toshiba laptop. (Windows 7 Ultimate 32 Bit) When i would start my computer, Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:1. Insert you Windows installation disc and restart your computer.2. Choose your language settings, and then click "Next.3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.File: BootBCD Status: 0xc000000e Info: An error occured while attempting to read the boot configuration data. tried to solve the problem using repaire methods such as :At the DOS prompt type the following three commands:bootrec.exe /fixmbrbootrec.exe /fixboot (may return an 'Eliment not found' message)bootrec.exe /RebuildBcdI also deleted the BCD parition or it's related to it which is 100Mb in size ,
View 8 Replies View RelatedVPN Network Adapter Failed
Dec 23, 2011My VPN does not work any more and kept getting the message that "Failed to connect for following reason :activating VPN adapter failed ". This happned after my system got hit by the Trojan "Win 7 Antispyware 2012 " and malware was run to remove it .
I am on windows 7 OS .
IaStor Failed To Load?
Nov 27, 2011Been noticing issues with this for a while, was wondering if there is a fix
View 6 Replies View RelatedATI Display Driver Failed
Oct 2, 2009When I was installing the 64bit drivers for Windows 7 it gave me the following log after installing the Catalyst Control Center. The Ati Display Driver failed to install properly.
View 4 Replies View RelatedLAN Driver Will Not Install - Reg DB Get Key Value Ex : Failed
Oct 6, 2009I got a new P55 motherboard. I installed windows. The board was giving me problems. I put my old P45 motherboard into the case and booted form the same hard drive. (Windows 7 64 bit) It booted up fine but no internet.
I put in the P45 driver disk to install it's drivers. All installed fine except for the ethernet controller driver. It says "Reg DBGet key Valueex : failed" (no spaces)
What would this mean? Something in the registry? I un-installed the P55 driver that was on the HD. Also I "disabled" the device in device manager.
I have an image I created from the P45 board I could simply replace this installation with this image, but would like to just get this driver installed and everything will work. It's right here on the disk but it gives me this error.
Does anyone know an easy way around this?
SSD Firmware Download Failed
Jun 14, 2012Just received a new OCZ Agility 3 SSD and are having some issues. I've installed the drive and formatted it, I have also tried to update to firmware on it countless times all of which have resulted in 'Firmware Download Failed'. The drives also seems to be disappearing occasionally and requires a restart before it appears again. I want to update the firmware before I clone my old HDD to it.
View 1 Replies View RelatedWindows 7 Failed To Start?
Sep 4, 2012I left my 160 GB hard disc unused for 1 month.It was installed with Windows 7 ultimate.But now it says unable to start windows. I have another 1 TB hd. i can boot from this and my 160 GB still works as a memory storage. Its only problem is that it is unable to boot.I think if i install a new copy of window it will work.but i need to know why it was happened when 160 GB hard disc was not in used for a long time and any other way to recover it.
View 3 Replies View RelatedWindows Failed To Start
Nov 7, 2012I'd had some problem with my laptop the last few days, what I believed to have happened is my laptop (Dell inspiron n5110) which is windows 7, was doing a configuration, but because of my bad connection, my internet dropped. It was stuck at 15% for 3 hours so I turned it off as it was about to run out of battery. It had some problems loading and starting up but they went after a day. but 1 day later I am booting up and I get a black screen.
View 9 Replies View RelatedHDD Bios Boot Failed
Feb 13, 2013I've recently purchased a used A665-3DV6 Toshiba Satellite Laptop. It had the BIOS password problem. So I've jumped the CMOS and cleared the password. I've initiated the "out of box state" and it went through the whole process. When it was finished I shut down the computer. Then the next morning I booted the computer up and it stated "HDD Boot Failed". I tried running Factory reset again but there is only a blinking cursor on the top left hand corner of the screen.
View 3 Replies View Related
