ATI Display Driver Failed
Oct 2, 2009When I was installing the 64bit drivers for Windows 7 it gave me the following log after installing the Catalyst Control Center. The Ati Display Driver failed to install properly.
View 4 Replies
ADVERTISEMENT
Display Driver Failed But Has Now Recovered
Mar 13, 2012I am having this problem where my monitor just goes blank and then a few seconds my desktop comes back as it was before. I have been getting a message sometimes after it happens saying something like the display driver failed but has now recovered. I had a more severe version of the problem just a little while ago where the monitor had gone to sleep and I could not wake it with the mouse. I actually had to reboot to make it work again. I've looked in device manager and looks ok there, This is a very new computer and has just had a fresh install a couple of days ago so I cant see it being anything major.
View 4 Replies View Related"Attempt To Reset The Display Driver And Recover From Timeout Failed"
Apr 1, 2011yesterday, i got 2 blue screens in my windows 7 home premium. i have an hp envy laptop. i had updated my video driver (ati mobility radeon hd 5850) earlier in the day (although i experienced similar blue screens with my old video driver version too...the old one was also the mobility radeon hd 5850, just an earlier version). i was trying to watch an online video in internet explorer 8, and i got a blue screen. so i had to do a manual shutdown. when it started up again, i chose for windows to check online for a solution to the problem (but windows never got back to me with one, if it found it). later on, when trying to watch a Internet video, the same blue screen appeared, and once again i had to do a manual shutdown. it may be related to my ati mobility radeon hd 5850, maybe even other things which i can't be sure of...also, i mentioned that i got similar bsods with my old video driver version too. at that time, i'm pretty sure i was using firefox instead of ie when trying to watch the online videos. by the way, i was able to watch several Internet videos normally yesterday, but on one occassion i did get that bsod. also, here is what at least part of the bsod said (on both occassions yesterday): "attempt to reset the display driver and recover from timeout failed"
View 14 Replies View RelatedRW2 Files Failed To Display Or Open
Feb 8, 2012I have been working with RW2 files on this PC without problems for 6 months and all was normal last night when I shut down as normal. This morning I switched on to continue my work and the window with RW2 files showed just blank icons. I clicked on one and got the message "unable to open this file type, no supporting program" or similar, usually it opens a preview window at the side and will open in Windows photo viewer with a double click, but now nothing. JPG files still display and work fine and all the RW2 files open normally in lightroom 3.6 when I open that. I rebooted but the problem persists. I then looked at system restore and there were no restore points for this month and it gave a list of 5 programs it would erase, which I had updated/installed a few days earlier so I decided to look for another way first (I have very bad internet so do not want to have to download those again). Everything has worked fine with those updates for several days so I suspect it has nothing to do with them.
View 2 Replies View RelatedPage Failed To Load - Changing Windows 7 64bit Display Resolution?
Apr 28, 2012Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space. Got "Page Failed to Load" error attempting to change my Windows 7-64bit display resolution. This used to work, but no more ( don't know what might have caused it). I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.
View 2 Replies View RelatedDisplay Driver Intel Graphics Accelerator Driver For Windows XP Stop?
Sep 22, 2012I have an Acer Aspire 7741z-4433 with an Intel(R) Pentium(R) p6200 (2.13 GHz, 3MB 1.3 cache). This only happens to me while I am playing The Sims 3. I have the game set on the lowest quality settings, even though my laptop "claims" to be HD LED, etc. This issue still happens. As you may know I cannot replace the graphics card as it is apart of the motherboard, and to buy a new motherboard with a better graphics card would cost more than a new computer. I have been the my manufacture's website and tried installing an update of the graphics card, and that didn't do the trick either. I am at my wits end, and I just want to play the game without it shutting down and freezing my computer. The reason I know the error is because I do Alt + Tab to get back to the desktop. The way it acts up while I am in game is the screen blacks out but I can still see the software's mouse, and then it blinks a couple times and then freezes completely?
View 1 Replies View RelatedDisplay Driver AMD Driver Stopped Responding And Has Successfully Recovered
Nov 11, 2012I have a brand new Dell XPS8500 running Windows 7 Ultimate x64. When trying to play online games, I keep getting this message:Display driver AMD driver stopped responding and has successfully recovered.The browser (Chrome) freezes up, the screen goes black, the error message pops up, the browser goes completely white and I have to go into task manager and kill it.I tried getting a screen shot but could not.
Intel Core i7-3770 CPU @3.40GHz
16 GB RAM
LAN Driver Will Not Install - Reg DB Get Key Value Ex : Failed
Oct 6, 2009I got a new P55 motherboard. I installed windows. The board was giving me problems. I put my old P45 motherboard into the case and booted form the same hard drive. (Windows 7 64 bit) It booted up fine but no internet.
I put in the P45 driver disk to install it's drivers. All installed fine except for the ethernet controller driver. It says "Reg DBGet key Valueex : failed" (no spaces)
What would this mean? Something in the registry? I un-installed the P55 driver that was on the HD. Also I "disabled" the device in device manager.
I have an image I created from the P45 board I could simply replace this installation with this image, but would like to just get this driver installed and everything will work. It's right here on the disk but it gives me this error.
Does anyone know an easy way around this?
Display Driver AMD Driver Stopped Responding And Has Recovered?
Jun 23, 2011I bought a new computer wth window 7 & have been having this problem but the company I bought it is unable to fix it.
View 2 Replies View RelatedGraphics Driver Has Failed And Recovered?
Feb 24, 2011I've posted on these forums about this problem before, it is one I've been truggling with for a long time.I run a game, and at some point during the game will freeze momentarily, minimize and I'll get the 'Graphics driver has failed and has recovered' error.Now, apart from the RAM and CPU, which both have been tested, every single component in my case has been replaced and tested thoroughly not just by me, but by the people in a computer store nearby who had been consulting me about the problem. They couldn't find any faults with the hardware and since it was a fresh installation of Windows 7, that didn't seem to be the problem either.Nevertheless, after a week of testing several different options they found nothing.
I've now installed a Windows XP dualboot and was surprised to see that the problem doesn't occur on XP.All hardware is completely Windows 7 approved.Does anyone have a clue as to what is causing this and how I might stop it from happening? It's a gaming rig that I invested quite a bit in, and it really feels like a waste having to stick with Dx9.
G-force 8400 Gs Driver Failed?
Nov 29, 2012just built a Supermicro system dual Xeon 604 cpu's used my video card (pci) in one of my pci x slots have tried many settings both in bios and slot configuration but my pc will just randomly re boot with no warning, every now and then I will see the BSOD that will say time out trying to load display driver, I see many people having similar issues with this card. time for a new card? running win 7 64 bit ran fine on my SOYO board that is now dead with same OS. no one has a possible solution? well for me it's not worth the aggravation. going to get an ATI dual monitor1 gig and see how that runs. figure with all the issues so many are having it must be a g force/windows/Intel incompatibility issue
View 6 Replies View RelatedMonitor Driver Install Failed?
Jan 5, 2013We have a new monitor and it came with a driver CD. I want to install it because it's neccessarry to support it's native resolution (1920x1080, I can't select this when connecting via RGB) The problem (and my question) is:The driver fails to install. I don't really get how this driver would work. It seems it wants to install on top of the graphics driver (Intel GMA x3100)The Monitor driver is available here: link here get the ZIP file (I guess it can be also found on LG's English website. Just search for M2232)You can try it in a virtual machine, it isn't required to have the monitor connected so you can try it if you don't own this product. (thoughI I *did* connect it)It wants me to select the display driver to install on. Basically it lists every output. I selected the one I had the monitor connected (It said Non-PNP display). It had no effect so I installed it on the other one too but still no effect.I did a system restore to try again (as there is no uninstaller for the driver, be careful! try it in a VM). Now it is doing the same, it says install successful, but then I get another popup saying install failed.
View 6 Replies View RelatedDisplay Driver VIA/S3G Unichrome Pro IGP Driver For Windows 7 32-Bit?
Jan 6, 2013download Display Driver VIA/S3G Unichrome Pro IGP driver for Windows 7 32 Bit download
View 1 Replies View RelatedWindows 7 + Device Driver Failed To Install
Nov 12, 2012Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 �C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
[code]....
Have tried to resolve issue with Canon powershot S50 connected by USB no longer functioning with W7.On occasions the only response is the pop up message driver device failed to install.The camer is recognised under " Device and Printers" When I trouble shoot response is to visit manufacturers site and download driver - not required under Windows compatibility listing.Have gone to Device Manager and removed all reference to Canon Camera under Portable devices but get same result. Have had a Microsoft IT tech look at the computer but he is at a loss.
Windows Says Device Driver Installation Failed
Apr 4, 2011Windows says device driver installation failed for hp laserjet 1012. This despite printer working correctly. Every time on reboot I get this message. How do I stop windows from trying to install driver for a working device???
View 2 Replies View RelatedThe Driver DriverWUDFRd Failed To Load For The Device?
Dec 8, 2012Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:
The driver DriverWUDFRd failed to load for the device WpdBusEnumRootUMB2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)
It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.
Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.From checking forums and searching I have found a few others with this issue and a few articles on its cause, WUDFRd failed to load for the device, Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2
I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!
Broadcom Bluetooth Driver Install Failed
Jan 31, 2010Talking about the Broadcom Bluetooth installer at Broadcom.com - Home. Everything works fine until the Instalshield process. Fails, saying "Device not plugged in" for Bluetooth Peripheral Device and Multimedia Audio Controller. Bluetooth Radios and Human Interface Devices are OK. Do you think my Bluetooth adapter is possibly just too old? It is a Belkin F8T012. Broadcom.com - Home doesn't offer support.
View 1 Replies View RelatedUSB 3.0 External HDD Failed Windows 7 Driver Install On USB 3.0 Port?
Mar 6, 2012Just got a new Asus Zenbook UX31E and am having a certain problem where if I plug my external drive (Samsung S2 1TB, USB 3.0, 2.5") into the 3.0 port windows tries to install a driver for the new device but fails. Now the drive powers on when connected but wont load up as an accessible drive and is not found is disc management.I've tried the HDD successfully in another laptop with USB 3.0 and it works fine on my Zenbook's USB 2.0 port so I'm guessing there's no problem with the HDD itself. Also I have tried a small flash drive in the Zenbook's 3.0 port which worked fine.I have tried updating the USB 3.0 driver to the latest version via Asus' driver database but have got the same result.I would of thought with such a prestigious laptop someone else would of run across this problem but all my googling has turned up ziltch.
View 9 Replies View RelatedDriver Installation For Microsoft Wired Controller Failed?
Sep 10, 2012Okay, I'm trying to hook this thing up to my new Dell Inspiron 15R. The thing is, when I plug it in, it keeps failing the driver installation. Ok now here is other part. I have used this controller perfectly fine on my previous HP Mini 210. As you know, that's a pretty weak computer compared to the one I just bought.w, after about 2 hours of researching, I've downloaded the current drivers from M$, and that didn't help at all. Next I came across someone who said check the device manager. Okay, so I did a cross examination with both computers and found the netbook had something called "universal serial bus usb controller" drivers with several others branching off while my Dell did not. Also the fact that the Mini uses USB2.0 while the Dell is 3.0.So I've come to the conclusion that my Dell is lacking(and it is) these "Controller" drivers. Now the annoying part is when I use the device manager to search for updates, it says it can't find anything. I've googled around(and used the driver disk that came with my Dell) to no avail.I would greatly appreciate it if anyone could help with my problem. I'm just using the controller for gaming. It works fine in the netbook, so I don't think power to the controller is an issue. My M$ drivers are up to date so I don't think it's those either.
View 1 Replies View RelatedSoundmax Integrated Driver - Failed To Play Test Tone
Feb 14, 2009This appears to be working but there is no sound. I get the message "failed to play test tone" when I click test in playback devices. Windows update automatically downloads updates for this and then tells me that it is working when it isn't. I have even tried to use generic drivers (like realteks) to see if that would work. I've tried compatibility mode with no luck as well.
Current Broken/non-funtioning Driveri : Soundmax Integrated Driver Version 5.12.1.5290
System : HP Pavillion dv4015cl
OS : Windows 7 Build 7022.winmain.090115-1850
Installing One Touch Software - Adding Printer Driver Failed
Jan 15, 2012I tried to install a One Touch 9320 USB Scanner and received "adding printer driver failed". The software is out there but I cannot connect make a connection to the scanner. All the wires are connected.
View 9 Replies View RelatedKernel-Mode Driver Framework Version 1.11 Failed Update
Nov 19, 2012The latest slew of updates has brought me some trouble, and one of this woes is a failed update. Here it is: [URL]
I read about my problem here: [URL]
Unfortunately, I'm not sure if my problem is the same as theirs, and if it is, I don't know how to fix it; I don't want to insult anyone, but the input on how to fix it was a bit vague.
Windows Update - Kernel-Mode Driver Framework Version 1.11 Failed
Nov 15, 2012I have a new build using Windows 7 HP SP1 64-bit which has been up and running for about a month. MS updates for 11/14/12 included the Kernel-Mode Driver Framework version 1.11 for Win 7. This update failed to install (several times), even when done alone. First time since building system where it has failed an update. Only thing I have added since original build is a EVGA GTX 650 video card (last week).
View 10 Replies View RelatedDisplay Driver Keeps Crashing?
Jun 18, 2012Periodically my screen will freeze and I will get a message that says display driver stopped working and recovered. However, sometimes my computer will resume being normal...and other times my screen will be totally disconfigured, jumbled...and messed up and I have to force shut down. Also periodically when I do restart my computer, there would be bluish streaks and $ signs all jumbled across the black screen before it says windows is starting up. When I am in safe mode, none of these problems occur. My operating system is windows 7. Because sometimes my display driver recovers when I tilt my computer a certain way when it seems to "crash" and the fact that this problem doesn't even occur in safe mode.
View 4 Replies View RelatedDisplay Driver Keeps Crashing?
Jul 8, 2012Most time when I go onto a game for some reason half way through the playing time the display driver stops working the screen just goes all fuzzy and the sound just glitches...
EventLogError: Display driver nvlddmkm stopped responding and has successfully recovered. I am on the latest drivers for my GTX 470...
More Info:
GPU1________________________________________________________________________________
Display device : GeForce GTX 470 on GF100 GPU
Display driver : 301.42
BIOS : 70.00.21.00.03
GUID : VEN_10DE&DEV_06CD&SUBSYS_079F10DE&REV_A3&BUS_6&DEV_0&FN_0
On-Screen Display server
________________________________________________________________________________
Active client(s) : On-Screen Display module
Active 3D process : PdaNetPC.exe
Nvidia Display Driver - Nvidia Display Driver
Jan 8, 2009Its ready for download at Welcome to NVIDIA - World Leader in Visual Computing Technologies.
What are you waiting for?
Display Driver Keeps Crashing?
Jun 18, 2012Periodically my screen will freeze and I will get a message that says display driver stopped working and recovered. However, sometimes my computer will resume being normal...and other times my screen will be totally disconfigured, jumbled...and messed up and I have to force shut down. Also periodically when I do restart my computer, there would be bluish streaks and $ signs all jumbled across the black screen before it says windows is starting up. When I am in safe mode, none of these problems occur. My operating system is windows 7. Because sometimes my display driver recovers when I tilt my computer a certain way when it seems to "crash" and the fact that this problem doesn't even occur in safe mode...I am not sure whether this is a driver software program, driver conflict
View 3 Replies View RelatedDisplay Driver Error?
Jul 28, 2012whenever i'm watching Internet for an extended period of time everything freezes and then a quick blackout occurs and a message is displayed stating that the windows vista display driver has crashed and recovered. i have windows 7. is this some kind of compatibility issue? i do not have a graphics card or video card, everything is done on the motherboard. the mb is supposed to run 7 well. and after a blackout, i get many more blackouts that are uncontrolable and then i recieve a blue screen and my computer restarts. what do i do?
View 4 Replies View RelatedBSOD From ATI Display Driver
Aug 27, 2009My computer keeps blue screening after I installed a driver for an ati radeon 9200 video card. I installed the driver in windows compatibility mode so I don't know why its not working. Any ideas?
View 2 Replies View RelatedAero/Display Driver
Nov 8, 2009I just upgraded from vista 32bit to windows 7 64bit. Everything works fine except I can't get Aero to work. When i clicked on the troubleshoot the error message read
"Video card doesn't support aero effects"
Where can i find the proper driver and how do i install it? Any help would be greatly appreciated. Here are my system specs straight from DxDiag. I know i have an NVIDIA but im not sure how to figure out exactly whcih kind.
Windows 7 64 Bit GTX 560 Display Driver?
Sep 19, 2011When I attempt to install my graphics driver (Nvidia Geforce GTX 560) and attempt to reboot my PC it proceeds past the POST screen and onto the "Loading Windows" screen, after the logo appears and finishes loading, instead of it moving on to my login screen it hangs on a blank BLACK screen with just my mouse pointer visible.Regardless of how many times I reboot my PC it always hangs right after the windows logo screen, I have attempted to do restores about 10 times and each time I restore I boots up fine, until I install the display drivers and attempt to restart. It does boot up in safe mode, and works fine on fresh installs.I have tried running the repair tool on the windows 7 disc, and in safe mode with no avail it tells me nothing is wrong. I attempted to run the start up repair and that also says nothing is wrong.
When I go into Device Manager under Display Adapters after I complete a system restore it does say "Nvidia Geforce GTX 560" and that it is working properly. Although it says I need to reboot to complete the update, which must be because this particular working system restore point was created after I installed the driver but before I restarted my pc. The only issue is when I go to restart my pc it hangs on the black screen again. Specs:[CODE]