LAN Driver Will Not Install - Reg DB Get Key Value Ex : Failed
Oct 6, 2009
I got a new P55 motherboard. I installed windows. The board was giving me problems. I put my old P45 motherboard into the case and booted form the same hard drive. (Windows 7 64 bit) It booted up fine but no internet.
I put in the P45 driver disk to install it's drivers. All installed fine except for the ethernet controller driver. It says "Reg DBGet key Valueex : failed" (no spaces)
What would this mean? Something in the registry? I un-installed the P55 driver that was on the HD. Also I "disabled" the device in device manager.
I have an image I created from the P45 board I could simply replace this installation with this image, but would like to just get this driver installed and everything will work. It's right here on the disk but it gives me this error.
Does anyone know an easy way around this?
View 5 Replies
ADVERTISEMENT
Jan 5, 2013
We have a new monitor and it came with a driver CD. I want to install it because it's neccessarry to support it's native resolution (1920x1080, I can't select this when connecting via RGB) The problem (and my question) is:The driver fails to install. I don't really get how this driver would work. It seems it wants to install on top of the graphics driver (Intel GMA x3100)The Monitor driver is available here: link here get the ZIP file (I guess it can be also found on LG's English website. Just search for M2232)You can try it in a virtual machine, it isn't required to have the monitor connected so you can try it if you don't own this product. (thoughI I *did* connect it)It wants me to select the display driver to install on. Basically it lists every output. I selected the one I had the monitor connected (It said Non-PNP display). It had no effect so I installed it on the other one too but still no effect.I did a system restore to try again (as there is no uninstaller for the driver, be careful! try it in a VM). Now it is doing the same, it says install successful, but then I get another popup saying install failed.
View 6 Replies
View Related
Nov 12, 2012
Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 �C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
[code]....
Have tried to resolve issue with Canon powershot S50 connected by USB no longer functioning with W7.On occasions the only response is the pop up message driver device failed to install.The camer is recognised under " Device and Printers" When I trouble shoot response is to visit manufacturers site and download driver - not required under Windows compatibility listing.Have gone to Device Manager and removed all reference to Canon Camera under Portable devices but get same result. Have had a Microsoft IT tech look at the computer but he is at a loss.
View 14 Replies
View Related
Jan 31, 2010
Talking about the Broadcom Bluetooth installer at Broadcom.com - Home. Everything works fine until the Instalshield process. Fails, saying "Device not plugged in" for Bluetooth Peripheral Device and Multimedia Audio Controller. Bluetooth Radios and Human Interface Devices are OK. Do you think my Bluetooth adapter is possibly just too old? It is a Belkin F8T012. Broadcom.com - Home doesn't offer support.
View 1 Replies
View Related
Mar 6, 2012
Just got a new Asus Zenbook UX31E and am having a certain problem where if I plug my external drive (Samsung S2 1TB, USB 3.0, 2.5") into the 3.0 port windows tries to install a driver for the new device but fails. Now the drive powers on when connected but wont load up as an accessible drive and is not found is disc management.I've tried the HDD successfully in another laptop with USB 3.0 and it works fine on my Zenbook's USB 2.0 port so I'm guessing there's no problem with the HDD itself. Also I have tried a small flash drive in the Zenbook's 3.0 port which worked fine.I have tried updating the USB 3.0 driver to the latest version via Asus' driver database but have got the same result.I would of thought with such a prestigious laptop someone else would of run across this problem but all my googling has turned up ziltch.
View 9 Replies
View Related
Jan 27, 2013
I have a problem with my laptop when trying to re-install Office 2013 preview edition - basically the initial install failed for some reason and can I can neither remove or install this software leaving me in some sort of Microsoft limbo.Someone I know suggested logging onto the "my account" section of the Microsoft site and actually deactivating the install however that has not solved the problem?CCleaner has also been run to try and remove any redundant registry entries however again that has not solved my problem.
View 2 Replies
View Related
Feb 24, 2011
I would rather not have to do a fresh install of Windows just to successfully apply the SP1 update, but here is a summary of what I've tried to do thus far:
[code]....
View 3 Replies
View Related
Jan 30, 2012
I have HP ProBook 4530s with Windows Home Premium 64bit. I just check the history of installed updated and I m shocked to see that windows updates are not being installed from last 6 months.
View 9 Replies
View Related
Sep 20, 2011
Computer Lagging. Believed to be from norton failed install. Deleted keys from registry not sure what else to do.
View 1 Replies
View Related
Feb 22, 2011
I have two Windows Updates that failed to properly install, how can I fix or reinstall them? I ran the Microsoft Fix It program and it said the updates were repaired but they are still listed as failed under the update history section of Windows Update. I run a 64 bit version of Windows 7
View 7 Replies
View Related
Feb 28, 2010
I WAS in 64 bit mode but had a system failure and had to reinstall.Since then I haven't been able to install in 64 bit mode. No matter what I try it always installs the 32 bit version.I've even re-partitioned my hard drive in order to get a completely fresh install. But nothing seems to work.Windows "knows" my system in 64 bit capable. In the Control Panel - View basic info about your computer it shows my processor as "AMD Athlon 64 X2 Dual Core Processor 4600+ 2.4 GHz".Is there a way coerce a 64 bit install?
View 3 Replies
View Related
Jul 25, 2012
I made the naive mistake of trying to upgrade from a Biostar TH67+ MB to a MSI Z77A-GD65 MB using my existing Windows install. After I installed the new MB and the new drivers within Win 7 Pro 64 bit, the machine wouldn't boot. So I reverted to the Biostar MB and it still won't boot. I have tried Safe Mode (which just hangs) and I have run Startup Repair several times. How I can further troubleshoot/repair the boot?
View 1 Replies
View Related
Nov 9, 2011
i have failed to install my windows 7 on my lenovo desktop because it pops up a message reading ATAPI incompatible how can i solve this problem or why
View 2 Replies
View Related
May 22, 2012
I just wanted to document my ordeal here for two reasons: 1.) in order to share my experience and 2.) beacause after 36+ hours of attempting to find a solution to my problem I could NOT find one and did a few things myself to remedy and fix the situation. This experience needs to be shared in case someone else goes through this and like me, NONE of the suggested fixes work.After a failed windows 7 install using an upgrade disc (clean install, no previous OS - this is possible with the right sequence of installation, google it). I continually recieved the error "Bootmgr is missing press ctrl+alt+delete+ to restart".There are many walkthroughs on the internet detailing how to remedy this problem BUT all of them are assuming Windows has been successfully installed and that you can repair it using the install disc and clicking "repair" when putting it into the disc drive and loading it before booting. My problem of course was that the OS was not successfully installed, therefore I had no way to access the repair options.I removed the hard drive and put it into a working PC and it was detected; reformatted the drive, scanned it using Western Digital's (it's a WD Caviar Blue 500gb) software to check for drive health as I assumed the drive was bad. The drive was reformatted successfully and the long test revealed no issues, the drive was healthy. I put it back into the new rig, checked cables, replaced sata cords, powered on and "Bootmgr is missing press ctrl+alt+delete+ to restart"
Went into BIOS and made sure boot order was correct - it was.Used a piece of software meant to fix bootmgr issues (url...) - no luck.I went ahead and performed memtest86+ 4.21 and detected tens of thousands of errors in the ram. This narrowed it down. I replaced the ram with ram I know has no errors and booted up. "Bootmgr is missing press ctrl+alt+delete+ to restart".This is when I realized that it must be connected to the bad install and that before tossing this PC out of the window of a moving car, I should wipe the drive completely and start over, as something on the drive must be corrupted, despite the reformat and health of the drive. Using DBAN Boot and Nuke (http://www.dban.org/download) I wiped the drive completely (took 10 hours or so). I prayed this would solve my problems and guess what: IT DID! At this point after restarting after Boot and Nuke and putting in the upgrade disc and went forward with my installation NO "Bootmgr is missing press ctrl+alt+delete+ to restart" and the install went perfectly.
View 10 Replies
View Related
Nov 2, 2012
I can't boot my windows 7 after creating a partition E and activated it, to install windows 8. It asks me to press any key to start from dvd and when I do that, I am prompted to press ctrl +alt+delete to restart but nothing happens and the screen freezes. In other words, I can just access the bios.Afer many trials to boot from dvd or usb or hard disk ,the computer is somehow dead. The pc is running an intel Dual Core on a gigabyte "GA-EP41-UDL3".
View 2 Replies
View Related
Dec 30, 2012
My computer was having some problems every time I booted it up. Upon start up, I would receive an error message saying "windows failed to start, a recent hardware or software change might have caused the problem" and would give me some options to pick from like Safe Mode options and Start Normally. I would click "start windows normally" and my computer would boot up normally and run just fine. But every time I turn my computer off, I come back the next day with the same error message. I tried running the windows repair option but it would never find anything.
I decided I would just perform a clean install and just be done with it, but after doing that, I tried booting my computer to have the SAME error message. Same thing happens, I just click start normally and it works fine. It's just a total hassle to have to deal with this error message every time I try turning my computer on. Since I performed the clean install, I have very little things re installed to the computer like Java and what not. I wouldn't think it would be Java because I have had that the entire time I have owned the computer and only recently got the error messages.
View 6 Replies
View Related
Oct 15, 2010
I have tried several times to Install Office 2010 and keep getting error 1935 half way through. I did remove the trail MS Office 2007 but not sure what else I should remove, I list all MS files I have.MS NET Framework 4 Client Profile,MS Office Live Add-in 1.5,MS Office suite activation assitant,MS Sliverlight,3 of MS SQL Server's,2 of MS Sync Framework's,4 of MS Visual's,MS Works,2 of MSXML,Compatiable Part 2007 Office system,Is there anything listed that I shoudl remove as I have no idea,Obviusly I have goggled and end up paying 30 for PC Health which was a waste of time.I have tried to repart NET Framework 4 but just hangs up.
View 7 Replies
View Related
Aug 17, 2011
problem installing roxio creator 2011 on Win 7 Ult x64. Will not recognize that I have Any Windows Platforms, so fails install.I tried to install in Safe Mode. It reached the point where it wants to install NET 3.5.1 and gives error: Windows programs and features needs to be turned on or off. I figure for NET 3.5.1. I tried every configuration and on go.
View 2 Replies
View Related
Sep 30, 2011
idn't use the Win7 Loader. It detected that my copy wasn't genuine and then it froze. After that regardless of how many times I tried, I cannot install an OS. I tried Hiren's Boot CD and that failed too. I've physically removed the HDD and formatted it on another system yet no good comes out of it. My HDD's health is fine.
View 8 Replies
View Related
Aug 25, 2012
I've connected my USB microphone, but Windows tried to install it only once and said Failed. I can't see my microphone now, and not sure what to do. I've checked Device Manager, there's that exclamation sign next to USB Audio Device, but when I click Update Drivers, it just says that Drivers are Up To Date. I've tried installing Realtek HD Audio drivers instead, but they don't work - I can see in Control panel that they are installed, but they are nowhere to be seen on Windows, and didn't change anything after reboot. How can I get this USB mic working?
View 4 Replies
View Related
Aug 23, 2012
I have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.When I am trying to load windows into it I get the errorWindows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menuThe Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)[CODE]
View 1 Replies
View Related
Nov 14, 2012
I tried installing 64bit Win 7 Ultimate on mirrored 3TB Seagate HDD using a Digitus RAID card and failed. After the failed attempt, I disconnected the HDD and plugged the primary HDD to an on-board SATA connector only to find its capacity reduced to 750 GB. Windows Preinstallation Environment shows the same size and running clean produced no effect.
Something odd I noticed after running diskpart is that no matter how many drive is connected to onboard SATA, it only shows the 750 GB and the PC name is MINWINPC.
I`m completely stuck with this and cannot figure any solution. Please anyone help me restore the original 3TB size.
View 6 Replies
View Related
Apr 26, 2012
Basically what happened was I deleted the factory partitions on this laptop( HP Pavilion G6) using disk management down to two partitions and attempted to install Ubuntu on the other partition.After a horrendously failed attempt to install Ubuntu, disk management will not recognize my hard drive even though I can see it and access it through windows. I just want to re-partition it so I can set up a recovery partition.It wouldn't boot up after the failed install, saying I had no operating system, but I used a Windows 7 repair disc and now it boots up fine, but disk management doesn't show my hd or any partitions.
View 3 Replies
View Related
Nov 13, 2010
i am using windows 7 in my PC, Intel dg41rq, my processor is Intel Pentium and have a 2GB ram on 500 GB hard disk..why Intel graphics media accelerator failed to install in my windows 7???when i tried to play chess titans game in windows 7 suddenly my monitor was off.
View 6 Replies
View Related
Jan 21, 2012
I have a Dell Inspiron 1545 (2.5 years old). All my data is backed up so I have no concerns about recoverying data.First, the laptop crashed and ran several chkdsk on start up. I froze several times during this. It said it had fixed some errors then started up again.This time it wanted to do start up repair. Same thing kept happening, froze at least twenty times during this. Eventually it gave me the blue screen of death.
'Technical information
*** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8004C1D260, 0xFFFFFA8004C1D498, 0xFFFFF8000130DDA0)'
This repeated several times. I ran the diagnostics and it told me the hard drive could not be found (error code 0146, 2000-0146). Essentially, it's a Dell laptop (I know) and I am not bothered about recovering the hard drive.I would, however, like to install Windows 7, or alternatively Linux, onto my external hard drive. But I just can't seem to get it to work.I have extracted a Linux iso to the external hard drive I want to install on, onto a cd, onto a FAT32 8gb usb stick, but it has given me the bootmgr is missing error every time. I have tried it with the interal HDD in and removed.I am no longer concerned about the internal HDD, i can use it for a door stop for all I am concerned, I just want to load ANY os onto my external hard drive so I can get the laptop working.
View 9 Replies
View Related
Oct 2, 2009
When I was installing the 64bit drivers for Windows 7 it gave me the following log after installing the Catalyst Control Center. The Ati Display Driver failed to install properly.
View 4 Replies
View Related
Feb 24, 2011
I've posted on these forums about this problem before, it is one I've been truggling with for a long time.I run a game, and at some point during the game will freeze momentarily, minimize and I'll get the 'Graphics driver has failed and has recovered' error.Now, apart from the RAM and CPU, which both have been tested, every single component in my case has been replaced and tested thoroughly not just by me, but by the people in a computer store nearby who had been consulting me about the problem. They couldn't find any faults with the hardware and since it was a fresh installation of Windows 7, that didn't seem to be the problem either.Nevertheless, after a week of testing several different options they found nothing.
I've now installed a Windows XP dualboot and was surprised to see that the problem doesn't occur on XP.All hardware is completely Windows 7 approved.Does anyone have a clue as to what is causing this and how I might stop it from happening? It's a gaming rig that I invested quite a bit in, and it really feels like a waste having to stick with Dx9.
View 5 Replies
View Related
Nov 29, 2012
just built a Supermicro system dual Xeon 604 cpu's used my video card (pci) in one of my pci x slots have tried many settings both in bios and slot configuration but my pc will just randomly re boot with no warning, every now and then I will see the BSOD that will say time out trying to load display driver, I see many people having similar issues with this card. time for a new card? running win 7 64 bit ran fine on my SOYO board that is now dead with same OS. no one has a possible solution? well for me it's not worth the aggravation. going to get an ATI dual monitor1 gig and see how that runs. figure with all the issues so many are having it must be a g force/windows/Intel incompatibility issue
View 6 Replies
View Related
Mar 13, 2012
I am having this problem where my monitor just goes blank and then a few seconds my desktop comes back as it was before. I have been getting a message sometimes after it happens saying something like the display driver failed but has now recovered. I had a more severe version of the problem just a little while ago where the monitor had gone to sleep and I could not wake it with the mouse. I actually had to reboot to make it work again. I've looked in device manager and looks ok there, This is a very new computer and has just had a fresh install a couple of days ago so I cant see it being anything major.
View 4 Replies
View Related
Apr 4, 2011
Windows says device driver installation failed for hp laserjet 1012. This despite printer working correctly. Every time on reboot I get this message. How do I stop windows from trying to install driver for a working device???
View 2 Replies
View Related
Dec 8, 2012
Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:
The driver DriverWUDFRd failed to load for the device WpdBusEnumRootUMB2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)
It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.
Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.From checking forums and searching I have found a few others with this issue and a few articles on its cause, WUDFRd failed to load for the device, Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2
I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!
View 7 Replies
View Related
