I have HP ProBook 4530s with Windows Home Premium 64bit. I just check the history of installed updated and I m shocked to see that windows updates are not being installed from last 6 months.
View 9 RepliesI have two Windows Updates that failed to properly install, how can I fix or reinstall them? I ran the Microsoft Fix It program and it said the updates were repaired but they are still listed as failed under the update history section of Windows Update. I run a 64 bit version of Windows 7
View 7 Replies View RelatedI have been trying for the past 3 nights to find a way to fix whatever is the reason for my latest windows updates continue to fail. There are 3 of them trying to be installed: KB2655992; KB2691442; KB2719985; I have tried the troublesshooting, added anti-malware, cleaned whatever I could or know how to clean and they still wont update.
View 2 Replies View RelatedAfter a full installation a few weeks ago, I forgot to see if updates installed correctly. As you can see from the screenshot, there's a number which haven't installed.
View 1 Replies View RelatedUntil now I did not know that Windows 7 keeps a record of successful and failed updates. I see that many updates have failed in the past although there was no indication of this at the time. Should I be worried? I should think it would take many hours to fix them all, time I do not have.
View 4 Replies View RelatedI have 5 updates that fail to install. I have also tried to manually install them, but they still fail Here are the updates:
KB2586448
KB2572076
KB2564958
KB2567053
KB2579686
The error code I get is "800736B3". I ran MS FIXIT and it said they did not detect any problems.
Windows Updates continues to re-install five specific updates which are:*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2604121) -Download size: 38.5 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368) -Download size: 1.8 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656405) -Download size: 11.7 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2686827) -Download size: 4.3 MB.*Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2600217) -Download size: 32.2 MB.- I purchased my computer 4 to 5 months ago. It is a Windows 7 Home Premium Hewlett-packard HP Pavilion dv6 Notebook PC (64-bit Operating System).
View 3 Replies View RelatedWindows Update now says, "Restart your computer to install important updates." When I do, the computer shuts down, saying "Preparing to configure updates..." When it restarts, it says, "Configuring updates, 100% completed" then restarts again. Upon reaching the welcome screen this time, it says "Failed to configure updates, reverting changes...Welcome" and returns me to my desktop. At this point, when I try to manually check for new updates (or if I just leave Windows Update alone until it checks itself), Windows Update tells me "Restart your computer to install important updates," and the process loops again, so I cannot check for updates.
View 3 Replies View RelatedI am part of a large organization that has a large amount of computers on our domain controller. I have Administrative rights to the computers only, and network access rights on our network. I keep a number of computers up to date, including various 3rd-party programs (i.e. java, flash, etc), and I currently manually remotely connect to each computer and install the updates to the programs from a network share, then run Windows update, select all the critical updates (as well as all the applicable optional updates), then disconnect and move on to the next one. Needless to say, time quickly adds up.
View 3 Replies View RelatedI have 4 Win 7 computer that will not up-date, Windows shows 21 updates available (all 4 computers show same), upon reboot system says "Updates Failed". Each computer upon reboot dsiplays an error message saying the "updates failed". rinse - repeat.This started with one computer about a month ago, I now have 4 that are doing it. I have scanned with Combofix, Superantispyware, Rkill, Symamtec's Endpoint, eSet on-line, Panda on-line, Malwarebytes, JRT, ADWcleaner, CCleaner, FSS, awsMBR, and tried the MS FIXIT.
I also tried this procedure:
1) Disabled Windows update Service
2) Deleted all files in c:\windows\softwaredistribution\datastore and deleted files in c:\windows\softwaredistribution\download
4) 3) Downloaded and installed the most up to date Windows Update Agent.
5) Restarted Windows Update Agent, made sure Workstation and Background Intelligent Transfer Services were running.
6) Ran the MS Mr. Fixit program to repair update issues.
7) Ran the Windows update. 21 updates to install (as always).
8) Rebooted
9) Guess what, same issue!
I tried this on ALL 4 COMPUTERS I have with this SAME issue, 2 of which are on the same domain, the other two are laptops. ALL 4 FAILED. All four (4) again show the need to receive 21 updates. All 4 were again ran through the update process, all four (4) again failed post re-boot to take the updates (message stated �up-dates failed� post re-boot)
For the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
I would rather not have to do a fresh install of Windows just to successfully apply the SP1 update, but here is a summary of what I've tried to do thus far:
[code]....
I have updates waiting to install. When I choose to install I get the "preparing to install" screen, but nothing happens after that.
View 5 Replies View RelatedJust got this new Acer aspire, windows 7 laptop and keep getting same error message when trying to install updates:' Windows update encountered an unknown error. 2 updates failed and were not installed - error codes 643 and 74F'.
[code]....
I've tried installing certain ones, even some ones at a time, but the results are the same. Download complete. Please restart. But the update never happens and I don't get an error message.
View 12 Replies View RelatedWindows 7 updates have not been installing recently - All the latest set of updates that have been offered attempt to install and then they stop - I attempted to install one at a time but this is no help either
View 14 Replies View RelatedWhere to start? Several weeks ago I installed a windows update & then my Bullguard firewall wouldn't start. I got remote assistance from Bullguard & they succesfully restarted my firewall.Since then I have permissions issues, I have tried changing my status from admin to standard but the standard option is greyed out. I have tried setting a new user account but that also will not let me apply any changes without a password which I don't have. Also when I go to All Programs this is empty?My other problem is my windows security updates faill to install ( error 8000ffff) I have looked at different solutions online & used microsoft fix it but all to no avail. I have 19 updates to install but they constantly come back with the same error.
View 1 Replies View RelatedI'm running Windows 7 64-bit and there are some updates I can't install. It loads to 15% then it says "failure configuring updates, reverting to old setup", or something similar. First I had 8 updates when this started happening but I managed to install the security updates by selecting them exclusively. I have have tried deleting my updates folder and download again but same thing happens. Is there a fix for this? It's annoying when my computer reboots because they can't be installed.These are the updates in question:
View 3 Replies View Relatedi just installed windows 7 on my computer, but when it starts downloading the service pack and other updates it doesn't download them at all
View 7 Replies View RelatedBasically my issue is when I install a Windows update, it installs then I go to shut down the PC and it installs before shutting off. I then go to pack on my PC and the update is back again, I have repeated this several times and It is still there.The update is:Security Update for Microsoft XML Core Services 4.0 Service Pack 2 for x64-bases systems (KB954430)
View 3 Replies View RelatedI have been trying to install some windows updates on a fresh install of Windows 7 Ultimate 64-bit. Every time I try to update I receive two error codes. One is 8024200D and the other is 80092004. I have tried everything I can think of aside from wiping and re-installing windows to get rid of these error codes to install the updates
View 15 Replies View RelatedI have gone at least 5 months since I last installed windows updates. I had partially disabled the automatic updates (made it so that it downloads automatically but I choose whether to install them) and have recently decided to install the 101 or so updates that had been downloaded automatically.
About 74 of those updates, but I was able to troubleshoot windows update and so was able to successfully install 30 of those important updates.
The problem now is that I have 44 updates that are downloaded and require a shutdown or restart to be installed. However every time I shutdown or restart my computer I have to wait 5-10 mins for windows to configure the updates and in the end they fail and the changes are reverted.
I've tried troubleshooting again but it did not work. I wonder if these updates are older versions of newer ones I have installed and are therefore failing to install.
I got the box telling me that "Windows needs to install updates and restart etc.". [code]
View 1 Replies View RelatedMy win7 system will not install updates. I have tried to follow leads from the web but to no avail. I have a long list of "failed installs".
View 3 Replies View RelatedI have about 12 updates that are taking way too long to install. Right now they're at 65%, tomorrow they might be at 68%, or even 72%. But the point is that they never completely install. Normally I shut my computer off at the end of the work day but nothing updates before the computer shuts all the way down. Last night I kept the computer on all night while trying to install updates and I ended up getting an error message saying that they couldn't install because of missing components, but it didn't mention what was missing. I believe that I might be missing some .dll files. I HAVE had success installing a couple Microsoft Office updates but, when it comes to Windows updates, they never happen. I've tried the Microsoft Fix-It and the System Update Readiness Tool but neither of those things worked. Usually the error code that I get is 0x80010108 if that helps at all.
View 9 Replies View RelatedFor several months I have had problems each day when asked to install "Windows Updates", some days I get 4 or 5 updates or more, for a long time it installed all except one. This has now expanded so I have three updates that will not install for some reason. It creates a restore point then tries and fails each time. I am using Norton Antivirus and have even disabled that, but I still can get the updates to install. I have never had this problem before. I also have a laptop and another PC computer that has done these updates, so why problems with this one? It's driving me crazy.I am enclosing a copy of the error message I get together with the list of failed attempts (only recent ones).
[code]...
I'm hoping to find an answer on why my computer is having a problem installing any updates now, be it windows updates, or other programs like acrobat reader and such...and if my no print issue may be related. I had no problems for a while running updates when I bought the computer in February, now as of a couple months ago, it always has errors when trying to install them. I have a Compaq Presario CQ56 Notebook PC running 64 bit Windows 7 Home Premium SP1. This problem occured about the same time that I noticed a no print issue, so I'm wondering if they are related. I tried 2 different printers that I've never had issues with until recently. Lexmark 3350 and a HP 932C are the printers with the proper drivers installed and the Lexmark has even worked on this computer a couple times before back when I first got it. I ran into this issue so I got out the HP to try and same thing. I click print, from any program, MS Office, Acrobat reader, whatever, and it does nothing...the program thinks it sent it, but the Print Status shows nothing, and nothing more happens. However, when in printer settings I can click print test page, and it'll spit it right out.
View 4 Replies View RelatedSo I just did a fresh reinstall as I do 3x per year. Comp running bad. I'm getting Microsoft Office errors when I click an attachment, I have this scripts stop running popup showing up all the time slowing me down and killing me and finally I just recently I had 4 impt updates ready to go so I updated and now 2 of them wont install.
Im running Malwarebytes and Microsoft Security Antivirus.
What do I need to do besides throw this laptop in the ocean?
recently i noticed my computer has been installing updates everytime i shutdown and startup, hence prolonging my startup/shutdown time by a lot. checked win update and realized most, if not all of the updates failed to do so. already tried using the MS FixIT tool, to to avail. tried other solutions on the net provided by the MS MVP, also didn't work.
View 1 Replies View RelatedI have a new Sony Vaio laptop and every time I log off there are 23 updates to install, it says "do not turn off computer, installing updates" but if I log on and off again even after 5 minutes all these 23 updates need to be installed, I have opened the control panel and chosen a different default time for the automatic updates but every time I log off these updates are showing but they never install
View 7 Replies View RelatedMy computer bluesecreens a LOT (3 times just today), has been nearly since I built it 5 years ago and I've gone through everything to fix it. Last thing I've noticed is that there have been a couple of updates to my motherboard firmware but when I try to install them I just get an error that they won't work with a 64 bit OS (Windows 7 64). I thought about using a live CD running a 32 bit Windows just to install the update.
View 7 Replies View Related