Until now I did not know that Windows 7 keeps a record of successful and failed updates. I see that many updates have failed in the past although there was no indication of this at the time. Should I be worried? I should think it would take many hours to fix them all, time I do not have.
View 4 Replies
This has been going on for what seems like a week or so now. Everytime I reboot it tells me I have 3 Windows Updates that need installing. After installing and rebooting it offers the same 3 updates every time. Can anyone help me out?I ran this command fsutil resource setautoreset true %systemdrive% in elevated command prompt and rebooted, but it didn't fix it.i'm on Windows 7 x64 the updates are
1. Security update for Microsoft .NET Framework 4 on XP, server 2003, Vista, Windows 7, server 2008, server 2008 R2 for 64 (KB2656351)
2. Update for Microsoft .NET Framework 4 on XP, server 2003, Vista, Windows 7, server 2008, server 2008 R2 for 64 (KB2600217)
3. Definition update for Windows Defender- KB915597 (Definition 1.139.0.0)
I have been trying for the past 3 nights to find a way to fix whatever is the reason for my latest windows updates continue to fail. There are 3 of them trying to be installed: KB2655992; KB2691442; KB2719985; I have tried the troublesshooting, added anti-malware, cleaned whatever I could or know how to clean and they still wont update.
View 2 Replies View RelatedI have HP ProBook 4530s with Windows Home Premium 64bit. I just check the history of installed updated and I m shocked to see that windows updates are not being installed from last 6 months.
View 9 Replies View RelatedAfter a full installation a few weeks ago, I forgot to see if updates installed correctly. As you can see from the screenshot, there's a number which haven't installed.
View 1 Replies View RelatedI have two Windows Updates that failed to properly install, how can I fix or reinstall them? I ran the Microsoft Fix It program and it said the updates were repaired but they are still listed as failed under the update history section of Windows Update. I run a 64 bit version of Windows 7
View 7 Replies View RelatedWindows Update now says, "Restart your computer to install important updates." When I do, the computer shuts down, saying "Preparing to configure updates..." When it restarts, it says, "Configuring updates, 100% completed" then restarts again. Upon reaching the welcome screen this time, it says "Failed to configure updates, reverting changes...Welcome" and returns me to my desktop. At this point, when I try to manually check for new updates (or if I just leave Windows Update alone until it checks itself), Windows Update tells me "Restart your computer to install important updates," and the process loops again, so I cannot check for updates.
View 3 Replies View RelatedI have 4 Win 7 computer that will not up-date, Windows shows 21 updates available (all 4 computers show same), upon reboot system says "Updates Failed". Each computer upon reboot dsiplays an error message saying the "updates failed". rinse - repeat.This started with one computer about a month ago, I now have 4 that are doing it. I have scanned with Combofix, Superantispyware, Rkill, Symamtec's Endpoint, eSet on-line, Panda on-line, Malwarebytes, JRT, ADWcleaner, CCleaner, FSS, awsMBR, and tried the MS FIXIT.
I also tried this procedure:
1) Disabled Windows update Service
2) Deleted all files in c:\windows\softwaredistribution\datastore and deleted files in c:\windows\softwaredistribution\download
4) 3) Downloaded and installed the most up to date Windows Update Agent.
5) Restarted Windows Update Agent, made sure Workstation and Background Intelligent Transfer Services were running.
6) Ran the MS Mr. Fixit program to repair update issues.
7) Ran the Windows update. 21 updates to install (as always).
8) Rebooted
9) Guess what, same issue!
I tried this on ALL 4 COMPUTERS I have with this SAME issue, 2 of which are on the same domain, the other two are laptops. ALL 4 FAILED. All four (4) again show the need to receive 21 updates. All 4 were again ran through the update process, all four (4) again failed post re-boot to take the updates (message stated �up-dates failed� post re-boot)
For the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
Windows Anytime Upgrade was not successful. Due to when you encountered this problem the system would not give any error code to start with isolating the problem why it fails.
View 9 Replies View RelatedMy windows 7 fails on my pc after successful installation, and also successful installation of drivers.How it goes :1. I set up windows 7 from USB. I clean format the entire hard disk.2. Windows successfully installed. Works great. 3. Install drivers. All successful. Works great. Restart after the driver is being installed.Successful.4. Works fine on day 1.5. Next day when I start, windows starts drive C: for disk check consistency. After checking the windows fails.6.Starts automatic repair and fails to do so. Nothing works."Automatic repair cannot repair your computerThis is what keeps on going on since the past last week. I kept automatic updates off. I even removed the RAM and the cell and motherboard and fitted it again
View 11 Replies View RelatedI just had to post with the fact that I have successfully installed Windows 7 Ultimate on the following system.Toshiba A35-S159.50 GB Hard drive.Pentium IV 2.3GHz 512MB RAM!I have to say I was impressed.The minimum requirement posted for Windows 7 was 1 GB of RAM so I didn't even expect the install to complete.It actually seems to have increased in performance which is not what I expected at all.This system has a Intel 852 Integrated Graphics Adapter and there are many threads beginning to form about the incompatibilities or the tricks people used to force it to work. I, however, chose to just use the default setup by windows which allowed me a 1024 x 768 resolution, which is perfectly fine for this laptop.
View 9 Replies View RelatedI just flashed my bios before trying to OC my new RAM and, as said, now Windows 7 won't start. Bios update seems successful, I can access it and the new version is written.
I'm guessing clean install but looking for some idea before that.
i5 2500k on Gigabyte P67-UD3 if it's any help. The bios update was from F3 to F7.
I'm having a problem in upgrading my vista home premium operation system to windows 7 home premium but i receive an error message. It says:
"The upgrade was not successful. Your previous version of windows is being restored. Do not restart your computer during this time".
Then nothing happen, by the way I cant make clean install for windows 7 because I need all of the files and documents in there....
I have just installed Win 7 and have tried to import my backed up Outlook Express files to Windows Live Mail. It appears towork ok but even though I have seen the folders copied in the import tool, i cannot see all the folders in WLM.
Any ideas folks?
I have 5 updates that fail to install. I have also tried to manually install them, but they still fail Here are the updates:
KB2586448
KB2572076
KB2564958
KB2567053
KB2579686
The error code I get is "800736B3". I ran MS FIXIT and it said they did not detect any problems.
I am trying to upgrade to Windows7 from vista home premiun, the computer goes through the whole process for about 3 hours and at the end says upgrade was not successful and reloads vista.
View 2 Replies View RelatedMy friend told me to fix his laptop and when he brought it to me i did a diagnostic test for the Hard Drive and Memory. The memory came out successful but the hard drive did not. I was wondering if I could replace the hard drive with my suggestion link below. My only concern is that will the HD will fit. He said, he would like a little speed boost if possible so I'll be giving him a 7200rpm HD.
View 1 Replies View RelatedMy HP Pavilion dv4 says that it burns a cd successfully, however, when I check the cd it's blank.It will read cd's, it never displays an error msg of any type. Does any one have any ideas as to what the problem may be and how to fix it?
View 8 Replies View RelatedI experienced this problem since I tried to consult my constant BSOD problem in my computer to a 'computer technician', resulting couple of problems, HDD failure and she made a so-called 'tweak' on my BIOS, to make the long story short, she didn't solved my BSOD problem. Ended up buying a new hard disk. I bought a new hard disk and a legit computer technician installed it. No BSOD or anything, my computer runs smoothly and runs like a brand new one, but the problem is my computer won't start after a successful restart. Monitor's light is blinking and the CPU's fan is still running as well as the CPU power button.
View 2 Replies View RelatedWell my computer was infected with a strange virus recently which I managed to get rid of with help of various antiviruses and anti spywares, and my pc is all clean again. But the problem I have now is that great number of folders have disappeared! I have already checked if they were hidden or even deleted, but when I manually access those folders from browser address bar it works just fine. (I.E theres no way I can see my "program files x86" in the browser, but yet when I type in C:program files x86 it would take me there just fine").
View 9 Replies View RelatedWindows Updates continues to re-install five specific updates which are:*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2604121) -Download size: 38.5 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368) -Download size: 1.8 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656405) -Download size: 11.7 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2686827) -Download size: 4.3 MB.*Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2600217) -Download size: 32.2 MB.- I purchased my computer 4 to 5 months ago. It is a Windows 7 Home Premium Hewlett-packard HP Pavilion dv6 Notebook PC (64-bit Operating System).
View 3 Replies View RelatedFor a while now I have been experiencing a strange problem. My laptop keeps changing the Windows Updates without my consent. I know this has been raised in the past but my problem is slightly different.I prefer to choose "Check for updates but let me choose whether to download or install them", however periodically the settings change without my consent to "Never check for updates".This is very frustrating as I am constantly having to keep an eye on this, and change the settings back to what they were in order to receive critical updates, or indeed any other update.The laptop was bought new just under 12 months ago and came with Windows 7 Home Premium 64Bit pre-installed.Has anyone else experienced this, or can anyone advise on a fix?
View 9 Replies View RelatedMy wifes computer has been acting up for about a week now. IE 8 is not loading properly and is crashing. I am unable to connect to MSE to get updates or to Windows to get updates. I have run Malwarebytes and Emsisoft and neither one can find a bug. Chrome works for a while and the she gets the AW SNAP message.
View 26 Replies View RelatedI just installed a ssd harddrive. Windows (7) backup discs ran fine. System image restore seems to have worked fine, only thing is programs are not showing up. This is my first time doing this and everthing I read, prior to, lead me to believe the programs would be included in the system image.
View 5 Replies View Relatedmy pc is a i7 2600 with an asus p8h67 mb, 16gb 1333mzh of ram and a ati hd 6790,xfx gpu.i play battlefiled 3, deus ex, f1 2011 in high for hours and hours without a any problem, this runs fine.but when i see an movie in windowns media player or other video player i the screen freezes and i receive the messege "the amd display driver stop to work and has recover successful.it happens only in windows media player ou any other player. in videos att Internet and others (redtube, xvideos ) the computer runs fine, without a error.
View 1 Replies View RelatedI recently followed procedures for removal a rogue Windows 7 Recovery malware application on my Windows 7 Home Premium system. After the successful removal of the malware, my Start Menu Programs are all missing (basically nothing in there) and 95% of all my icons (on the desktop, within Win Explorer) are all grayed-out. (They still work but are gray). I have a feeling it could be a corrupted user profile, but I'm not sure. So far, I've restarted twice, right-clicked the start button to make sure default settings are set, ran a CMD prompt with SFC /SCANNOW.
View 1 Replies View RelatedI did search out this problem...very old posts recommended I start a new thread.For the last 2 weeks every time I shut down automatic install...installs the same 8 updates.
View 9 Replies View Relatedfor 72 hours now im geting constant updates on windows update,windows even re instaled SP1 ...story goes my hdd broke down 3 days ago so i installed on a new hd win 7 home prem. x64 +sp1, since that time i had at least 5 hours of updates (inc. setup),funny thing is a friend did format on his pc today and we spend 3 hours updating (dont think he finished, instead he went to sleep) My q is (as stated above) is there a reason for the 34/72/4/3/2/1/silverlight new updates found????? did Windows 7 went unstable???its rly anoying (got some failed updates to)until 3 days ago i had no probs.
View 4 Replies View RelatedI want to video record my working steps in my screen. Is there any windows built-in tool I can use to video recording my computer screen ?(Yes, I know there is other alternative to do it, suhc as ask my mum to hand-held my camera to capture my screen during I am working. But the quality is no good, blur and shaking all the time.
View 9 Replies View RelatedCan i record using a mic with windows 7/ acer aspire 5532? And can i record using a mic to a cd?
View 2 Replies View Related
