problem installing roxio creator 2011 on Win 7 Ult x64. Will not recognize that I have Any Windows Platforms, so fails install.I tried to install in Safe Mode. It reached the point where it wants to install NET 3.5.1 and gives error: Windows programs and features needs to be turned on or off. I figure for NET 3.5.1. I tried every configuration and on go.
View 2 RepliesThe drag to disc program I usually used fits only to XP en older. So NOT to windows 7.Were can i get the Drag to Disc software for Windows 7?
View 1 Replies View RelatedI'm having problems with driver incompatibility with Roxio drag to drop for windows 7
View 1 Replies View RelatedI'm using Windows 7 SP1 Ultimate edition, and every app I installed is working. But when I go to the Windows Live website, I can't download windows live essentials! When I click on "Download now" browser just keeps loading and loading but nothing happens. Tried with Chrome and IE, and I got same result. Then, I got an idea - I have copied wlsetup-web.exe file from my laptop to the USB flash memory, and then tried installing. File runs, but I can't get farther than "Prepairing the installation" because I got some error which say that I'm not connected to the Internet, although I am.
View 3 Replies View RelatedI have a fairly Dell XPS Home Premium Windows7 64 bit PC.It comes with Roxio Burn 1.0, but I cannot get it to copy DVD-R's.I can burn audio files to a DVD-R and play them.The DVD-R was created on our DVD recorder and Finalized.Roxio reads the DVD-R and pops out the disk and asks for a blank, readable, DVD+R (recommended).I put in a DVD-R, or DVD+R and it reads the disk and pops it out with the same warning. These are new Memorex disks.I did a chat session with Dell Support and they could find nothing wrong.The Dell rep asked me what type of disks they were (Memorex) and later said that Memorex has known problems and that I should try Sony.I happened to have one Sony DVD+R, so I copied the Memorex DVD-R, then put in the Sony DVD+R. It started to burn, but then reported a different error.I had some blank Sony DVR-RW�s, so I put some video on one, and tried to copy to the other.It failed with Device Error and Roxio disappeared.I tried InfraRecorder clicked on Video Disk, tried copy to Disk Image, and got Cannot read TOC header.
View 1 Replies View RelatedI am looking for any online store which i could create my own barebone computer kit
View 3 Replies View RelatedHas anybody tested this before? YUMI - Multiboot USB Creator (Windows) | USB Pen Drive Linux It appears to promise a way to boot from USB to multi and select-able ISOs?So the software would format the USB drive for me once, and I could then add ISOs for Windows 7 pro, Ghost and GParted?If this works.. I would not need CD/DVDs devices or media on newer desktops..
View 4 Replies View RelatedI bought Toshiba Laptop this march 2012, I have not used it as I am having a problem trying to get recovery media creator.
View 3 Replies View RelatedTwo weeks ago my laptop harddrive (Toshiba - 500GB) started to fail, so I created a system image and tried replacing the HDD with a SSD (OWC - 240GB) after getting an error I figured out I needed to use a HDD that was 500GB+ even though my system image was only a 115 GB file. So I got a Seagate 500GB drive and restored it with no problems. However, I'd still like to use the SSD so I partitioned the new C: drive down to 150GB and tried to create an system image of just the C: & System. But I'm still getting this error when I try to recover the system image to the SSD. I'm following the exact steps that I used when I restored it to the Seagate HDD.
View 1 Replies View RelatedWhile creating Toshiba recovery media, it was interupted by support, on the 4th disc. Already created the 1st 3, and need to create the remaining 2. How do I begin on disc 4?
View 3 Replies View RelatedI would rather not have to do a fresh install of Windows just to successfully apply the SP1 update, but here is a summary of what I've tried to do thus far:
[code]....
I have HP ProBook 4530s with Windows Home Premium 64bit. I just check the history of installed updated and I m shocked to see that windows updates are not being installed from last 6 months.
View 9 Replies View RelatedI have a problem with my laptop when trying to re-install Office 2013 preview edition - basically the initial install failed for some reason and can I can neither remove or install this software leaving me in some sort of Microsoft limbo.Someone I know suggested logging onto the "my account" section of the Microsoft site and actually deactivating the install however that has not solved the problem?CCleaner has also been run to try and remove any redundant registry entries however again that has not solved my problem.
View 2 Replies View RelatedOperating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 �C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
[code]....
Have tried to resolve issue with Canon powershot S50 connected by USB no longer functioning with W7.On occasions the only response is the pop up message driver device failed to install.The camer is recognised under " Device and Printers" When I trouble shoot response is to visit manufacturers site and download driver - not required under Windows compatibility listing.Have gone to Device Manager and removed all reference to Canon Camera under Portable devices but get same result. Have had a Microsoft IT tech look at the computer but he is at a loss.
I have two Windows Updates that failed to properly install, how can I fix or reinstall them? I ran the Microsoft Fix It program and it said the updates were repaired but they are still listed as failed under the update history section of Windows Update. I run a 64 bit version of Windows 7
View 7 Replies View RelatedI made the naive mistake of trying to upgrade from a Biostar TH67+ MB to a MSI Z77A-GD65 MB using my existing Windows install. After I installed the new MB and the new drivers within Win 7 Pro 64 bit, the machine wouldn't boot. So I reverted to the Biostar MB and it still won't boot. I have tried Safe Mode (which just hangs) and I have run Startup Repair several times. How I can further troubleshoot/repair the boot?
View 1 Replies View Relatedi have failed to install my windows 7 on my lenovo desktop because it pops up a message reading ATAPI incompatible how can i solve this problem or why
View 2 Replies View RelatedI just wanted to document my ordeal here for two reasons: 1.) in order to share my experience and 2.) beacause after 36+ hours of attempting to find a solution to my problem I could NOT find one and did a few things myself to remedy and fix the situation. This experience needs to be shared in case someone else goes through this and like me, NONE of the suggested fixes work.After a failed windows 7 install using an upgrade disc (clean install, no previous OS - this is possible with the right sequence of installation, google it). I continually recieved the error "Bootmgr is missing press ctrl+alt+delete+ to restart".There are many walkthroughs on the internet detailing how to remedy this problem BUT all of them are assuming Windows has been successfully installed and that you can repair it using the install disc and clicking "repair" when putting it into the disc drive and loading it before booting. My problem of course was that the OS was not successfully installed, therefore I had no way to access the repair options.I removed the hard drive and put it into a working PC and it was detected; reformatted the drive, scanned it using Western Digital's (it's a WD Caviar Blue 500gb) software to check for drive health as I assumed the drive was bad. The drive was reformatted successfully and the long test revealed no issues, the drive was healthy. I put it back into the new rig, checked cables, replaced sata cords, powered on and "Bootmgr is missing press ctrl+alt+delete+ to restart"
Went into BIOS and made sure boot order was correct - it was.Used a piece of software meant to fix bootmgr issues (url...) - no luck.I went ahead and performed memtest86+ 4.21 and detected tens of thousands of errors in the ram. This narrowed it down. I replaced the ram with ram I know has no errors and booted up. "Bootmgr is missing press ctrl+alt+delete+ to restart".This is when I realized that it must be connected to the bad install and that before tossing this PC out of the window of a moving car, I should wipe the drive completely and start over, as something on the drive must be corrupted, despite the reformat and health of the drive. Using DBAN Boot and Nuke (http://www.dban.org/download) I wiped the drive completely (took 10 hours or so). I prayed this would solve my problems and guess what: IT DID! At this point after restarting after Boot and Nuke and putting in the upgrade disc and went forward with my installation NO "Bootmgr is missing press ctrl+alt+delete+ to restart" and the install went perfectly.
I can't boot my windows 7 after creating a partition E and activated it, to install windows 8. It asks me to press any key to start from dvd and when I do that, I am prompted to press ctrl +alt+delete to restart but nothing happens and the screen freezes. In other words, I can just access the bios.Afer many trials to boot from dvd or usb or hard disk ,the computer is somehow dead. The pc is running an intel Dual Core on a gigabyte "GA-EP41-UDL3".
View 2 Replies View RelatedMy computer was having some problems every time I booted it up. Upon start up, I would receive an error message saying "windows failed to start, a recent hardware or software change might have caused the problem" and would give me some options to pick from like Safe Mode options and Start Normally. I would click "start windows normally" and my computer would boot up normally and run just fine. But every time I turn my computer off, I come back the next day with the same error message. I tried running the windows repair option but it would never find anything.
I decided I would just perform a clean install and just be done with it, but after doing that, I tried booting my computer to have the SAME error message. Same thing happens, I just click start normally and it works fine. It's just a total hassle to have to deal with this error message every time I try turning my computer on. Since I performed the clean install, I have very little things re installed to the computer like Java and what not. I wouldn't think it would be Java because I have had that the entire time I have owned the computer and only recently got the error messages.
Just got a new Asus Zenbook UX31E and am having a certain problem where if I plug my external drive (Samsung S2 1TB, USB 3.0, 2.5") into the 3.0 port windows tries to install a driver for the new device but fails. Now the drive powers on when connected but wont load up as an accessible drive and is not found is disc management.I've tried the HDD successfully in another laptop with USB 3.0 and it works fine on my Zenbook's USB 2.0 port so I'm guessing there's no problem with the HDD itself. Also I have tried a small flash drive in the Zenbook's 3.0 port which worked fine.I have tried updating the USB 3.0 driver to the latest version via Asus' driver database but have got the same result.I would of thought with such a prestigious laptop someone else would of run across this problem but all my googling has turned up ziltch.
View 9 Replies View Relatedidn't use the Win7 Loader. It detected that my copy wasn't genuine and then it froze. After that regardless of how many times I tried, I cannot install an OS. I tried Hiren's Boot CD and that failed too. I've physically removed the HDD and formatted it on another system yet no good comes out of it. My HDD's health is fine.
View 8 Replies View RelatedI've connected my USB microphone, but Windows tried to install it only once and said Failed. I can't see my microphone now, and not sure what to do. I've checked Device Manager, there's that exclamation sign next to USB Audio Device, but when I click Update Drivers, it just says that Drivers are Up To Date. I've tried installing Realtek HD Audio drivers instead, but they don't work - I can see in Control panel that they are installed, but they are nowhere to be seen on Windows, and didn't change anything after reboot. How can I get this USB mic working?
View 4 Replies View RelatedI have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.When I am trying to load windows into it I get the errorWindows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menuThe Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)[CODE]
View 1 Replies View RelatedI tried installing 64bit Win 7 Ultimate on mirrored 3TB Seagate HDD using a Digitus RAID card and failed. After the failed attempt, I disconnected the HDD and plugged the primary HDD to an on-board SATA connector only to find its capacity reduced to 750 GB. Windows Preinstallation Environment shows the same size and running clean produced no effect.
Something odd I noticed after running diskpart is that no matter how many drive is connected to onboard SATA, it only shows the 750 GB and the PC name is MINWINPC.
I`m completely stuck with this and cannot figure any solution. Please anyone help me restore the original 3TB size.
i am using windows 7 in my PC, Intel dg41rq, my processor is Intel Pentium and have a 2GB ram on 500 GB hard disk..why Intel graphics media accelerator failed to install in my windows 7???when i tried to play chess titans game in windows 7 suddenly my monitor was off.
View 6 Replies View RelatedI have a Dell Inspiron 1545 (2.5 years old). All my data is backed up so I have no concerns about recoverying data.First, the laptop crashed and ran several chkdsk on start up. I froze several times during this. It said it had fixed some errors then started up again.This time it wanted to do start up repair. Same thing kept happening, froze at least twenty times during this. Eventually it gave me the blue screen of death.
'Technical information
*** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8004C1D260, 0xFFFFFA8004C1D498, 0xFFFFF8000130DDA0)'
This repeated several times. I ran the diagnostics and it told me the hard drive could not be found (error code 0146, 2000-0146). Essentially, it's a Dell laptop (I know) and I am not bothered about recovering the hard drive.I would, however, like to install Windows 7, or alternatively Linux, onto my external hard drive. But I just can't seem to get it to work.I have extracted a Linux iso to the external hard drive I want to install on, onto a cd, onto a FAT32 8gb usb stick, but it has given me the bootmgr is missing error every time. I have tried it with the interal HDD in and removed.I am no longer concerned about the internal HDD, i can use it for a door stop for all I am concerned, I just want to load ANY os onto my external hard drive so I can get the laptop working.
I got a new P55 motherboard. I installed windows. The board was giving me problems. I put my old P45 motherboard into the case and booted form the same hard drive. (Windows 7 64 bit) It booted up fine but no internet.
I put in the P45 driver disk to install it's drivers. All installed fine except for the ethernet controller driver. It says "Reg DBGet key Valueex : failed" (no spaces)
What would this mean? Something in the registry? I un-installed the P55 driver that was on the HD. Also I "disabled" the device in device manager.
I have an image I created from the P45 board I could simply replace this installation with this image, but would like to just get this driver installed and everything will work. It's right here on the disk but it gives me this error.
Does anyone know an easy way around this?
I installed a new MOBO last night (17/02/2012) and booted up and my Windows 7 could not boot. It went into repair mode and could not repair.
So I installed a new Windows 7 and now see the Windows.old folder. I would like to recover the huge amount of settings and personalisation from the old Windows system.
I have not communicated with anyone who has REALLY had a Windows recovery ever work.
If anyone knows, this is the perfect time for me to be shown the light.
I had previously had a issue with a virus/Trojan, I downloaded multiple aintvirus/malware removel Tools, to no avail. So I decided to do a full recovery, apon the recovery completion my system starts to reinstall windows. At that point after registry install the system gives error message that windows is unable to install to "thuis systems hardware"(besides buying a recovery CD or new OS. Have college work due end of week.
And now its saying hardisk failure and bios is not recognizing my HDD..
We have a new monitor and it came with a driver CD. I want to install it because it's neccessarry to support it's native resolution (1920x1080, I can't select this when connecting via RGB) The problem (and my question) is:The driver fails to install. I don't really get how this driver would work. It seems it wants to install on top of the graphics driver (Intel GMA x3100)The Monitor driver is available here: link here get the ZIP file (I guess it can be also found on LG's English website. Just search for M2232)You can try it in a virtual machine, it isn't required to have the monitor connected so you can try it if you don't own this product. (thoughI I *did* connect it)It wants me to select the display driver to install on. Basically it lists every output. I selected the one I had the monitor connected (It said Non-PNP display). It had no effect so I installed it on the other one too but still no effect.I did a system restore to try again (as there is no uninstaller for the driver, be careful! try it in a VM). Now it is doing the same, it says install successful, but then I get another popup saying install failed.
View 6 Replies View Related