Two weeks ago my laptop harddrive (Toshiba - 500GB) started to fail, so I created a system image and tried replacing the HDD with a SSD (OWC - 240GB) after getting an error I figured out I needed to use a HDD that was 500GB+ even though my system image was only a 115 GB file. So I got a Seagate 500GB drive and restored it with no problems. However, I'd still like to use the SSD so I partitioned the new C: drive down to 150GB and tried to create an system image of just the C: & System. But I'm still getting this error when I try to recover the system image to the SSD. I'm following the exact steps that I used when I restored it to the Seagate HDD.
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
Has anybody tested this before? YUMI - Multiboot USB Creator (Windows) | USB Pen Drive Linux It appears to promise a way to boot from USB to multi and select-able ISOs?So the software would format the USB drive for me once, and I could then add ISOs for Windows 7 pro, Ghost and GParted?If this works.. I would not need CD/DVDs devices or media on newer desktops..
I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
problem installing roxio creator 2011 on Win 7 Ult x64. Will not recognize that I have Any Windows Platforms, so fails install.I tried to install in Safe Mode. It reached the point where it wants to install NET 3.5.1 and gives error: Windows programs and features needs to be turned on or off. I figure for NET 3.5.1. I tried every configuration and on go.
While creating Toshiba recovery media, it was interupted by support, on the 4th disc. Already created the 1st 3, and need to create the remaining 2. How do I begin on disc 4?
My friend bought a laptop with a dead hard drive, so she went on craigslist and bought a 250GB HD with windows 7 on it. The problem is the new HD was from a dell computer and her laptop is a Compaq. I know about the MB bios not being compatible and thats why the HD wont boot to windows(I'm NOT Computer Illiterate) I just need help with options. I want to know how to reformat the HD and keep windows 7 that is on it.One of the solutions I found was to download the windows 7 ISO and burn it to a DVD or a 4GB flash drive and install it that way... neither I nor my friend has a job so buying a legitimate windows 7 disk is a no go(*sigh*) and we don't have a DVD burner, so that option is a no go.
I am writing this on a new build PC with Win 7 RC installed. The problem benig I installed a small spare HD, I have got so involved in learning Win 7 and liking what I'm seeing that I got it set up great but the HD is not the one I want to use.
My other internal HD of an other PC is much larger and the one I wish to use. I don't know how/the procedure in transferring my settings files, folders from the small to the larger HD.
I have every single folder, file, emails and so on backed up on an external HD, so once larger internal HD is up and running I could restore/transfer my files/folders/e-mails/favorites that way but what about settings.
The larger HD as yet does not have Win 7 RC installed and this will have to be done first. I do not wish to partion the larger HD yet.
There are possible several effective ways to transfer everything, settings and so on from the small to the large but need the procedure explained, simple works best with me.
Or would it simply be best to install Win 7 on big HD and then transfer/restore, files,folders and so from the external back up HD.
I currently have a laptop running Windows 7 Pro 64 and a Desktop running Windows 7 Pro 32. What I would like to do is do a fresh install on both PC's but install the 64bit onto the Desktop and the 32bit onto the Laptop. I know the process is easy enough, but once both are installed properly, would I run into any issue during activation or any other issues? Would there be anything I need to do before hand? (not including backing up files and such).
Well as everyone using Windows RC knows, it'll be shutting down every hour or so starting in a week or so.
I've been looking at two different options. First option was to use Ubuntu 9.1.0 though I have no experience with it. Thing is I game a little and wanted to run games also. I looked into using Wine yet its not always guaranteed.
Second option was to do a clean install of Windows 7 using an OEM copy for far less than retail. Also, thing is..I might be receiving a new computer from school and was wondering how it would work out if I installed the Windows 7 OEM to this hard drive then swapped it out to the new computer. I heard you cannot change anything once the OEM is installed without calling Microsoft. Would it be possible to swap out the hard drive and put it into my new machine?
I'm getting an eVGA e-GeForce GTX 285 soon, and I currently have a BFG GeForce 8800 GTX in my system. I usually uninstall the graphics driver I have installed, and then swap the card and install it's new driver. Is there any other "better" way, or is that pretty much the standard procedure?
Is a registry sweep recommended to get rid of any remaining driver components? Do you recommend any programs to do this?
The hard drive in my friends Dell Inspiron 15R (M501R/M5010) needs to be replaced. I have access to an older HP pavillion hard drive with identical specs (SATA, 5400 rpm, 9.4mm/70mm, etc.). Before I spend a few hours taking apart the inspiron to get to the hard drive which is not easily accessible, I want to make sure the two hard drives are interchangeable, and that there won't be any HP vs. Dell compatibility issues.
When i got my 500 gig internal HD, I messed up and the C: partition is too small. I can't move anything else outta the C partition into the much larger D partition. SO now I want to create a system image on my external HD, so I can re-install Win7 Pro, and not use any partitions. WELL, when i try to create a system image on this external, which sez only needs 396 gig,Windows tell me the external doesn't have enuff space for the shadow volume? There is nothing ON this external. Has 434 of 465 gig free. SO why is that NOT enuff space?
I want to create a system image on my NTFS formatted portable WesternD HDD. Now It has about 250GB of space left(the portable HDD), and the Laptop PC that i want to create the image of, tells me I need about 199GB for the system image.Then first time I created the image, it gave me a failure message saying I should run a CHKDSK /R and ty again. I ran a CHKDSK /R on the external drive and tried making a system image again, where it got about halfway and gave me the same message. What is going wrong every time?
I made a system image backup from my ssd,then I bought another ssd to put the system image on,I tried when the 2nd ssd was completely empty; it saysthere is no disk to recover to ( or something like that )then I installed clean version of windows on the 2nd ssdafter that I tried restoring via the system repair disc but it kept telling me the same message
i am trying to back up and create a system image but evert time i do i get this error THE SYSTEM CANNOT FIND THE FILE SPECIFIED OX87007002, i have window 7 64 bit professional i think the problem is with this system reserved partition
I recently brought a new ssd disk because the old one was running out of space. Since I have created a system image I was of just restoring this to the new ssd disk but I have also brought some new ram as well and will install this too. Will this cause problems with using system image.
After my problems reported elsewhere, I decided to make a system image after I got things working. This was recommended by inference by one of the gurus who responded to my questions.So I got the system up again and I needed to learn about system images. So I hit F1 and read about creating a system image. Clicked here, clicked there, specified by external hard drive and told it to only include my system drive C:. Whir, whir, whir . . .. system image created.Now, I've cleaned the system of any possible Malware, so I want to create a new image of my system drive. So, I click here, click there and specify my external hard drive but NOW it won't let me include only drive C:, it wants to include my data drive, E:. The check box for E: is greyed out so I can't uncheck it.
I know how to perform a System Image, but now can't do so. I am using a Seagate Expansion External hard drive. Somewhere along the line there was a glitch and a red X (disconned) appeared on the drive icon in back up. I tried the same drive in an identical Windows 7 computer. Now I have red X's on both computers. The drive is fine, wiped and formatted, and the computer recognizes it. Still the red X on both computers. I can't get it off. The "start back up" tab is grayed out.
I am using 2 identical Dell Studio XPS 8000 desktop computers (wit Microsoft USB Natural Keyboards), 1TB hard drives, Windows 7, 64 bit platform) and I had no problem in the past making System Images. I have 2 separate external hard drives (1 is a 1TB Seagate Expansion External Hard Drive, the other is a 160GB hard drive.)It seems the System Image is approximately 149.GB, so will fit.I thought you had to erase the previous system image to put a new one on the same hard drive, but both computers said the drive was disconnected, and put a big red X on the drive location. Turns out I had to reformat the empty drives. I did, and the computers recognize both dries when they are connected, but the red X remains, and attempts to make a new system image fail. I am offered the "start backup" box, I can click on it, and all seems to be going well until the fill bar (green) stops about 1/6th of the way across, it stops there and j ust spins, not filling anymore, and if left long enough, it turns completely red and says the process failed.
Did a fresh install of Windows 7 64-bit and all my apps, deleted Windows.old, defrag'ed and activated. Then created a SYSTEM IMAGE using Win 7 BACKUP and RESTORE, so far so good.
Win 7 and my apps take up 43.9 GB on the hard drive but the SYSTEM IMAGE it created on my external drive is only 23.7 GB. Tried it on my laptop with similar results ISO was about half the HDD. Does that sound right? Just seems the ISO should have matched the HDD GB-wise unless it compresses or something.
I just bought all the parts to build a new computer and I'm putting them together right now. Next step is gonna be installing Windows 7 Professional 64-bit and I'd like to make a backup copy of that fresh install, in case something goes wrong in the future or maybe if I just wanna go back to a clean Windows installation after a while.
Currently I'm thinking of using the "Create a system image" option in the Backup and Restore category from the Control Panel, right after I finish the installing Windows. I've read that this tool creates a .VHD backup of the disk where Windows is installed but I have a couple of questions about using this method:
How big is gonna be the resulting backup? If I installed Windows in a 120GB partition is the backup system image gonna be 120GB in size or is just gonna be ~30GB-ish i.e. the size of Windows system files and folders?
If I restore that system image after using the system for a while is it gonna wipe clean the whole partition and reset it to the state it was when I made the image or is it just gonna bring back the files and folders from the backup and leave alone any other files I had put in the partition?
I just built my first computer on Friday. As the Newegg video I was using as a guide suggested I made a system image shortly after I got it running but before I put much on, like Steam or any games for example. It went fine that time and found my HDD (I use an SSD for my OS, Steam, and games). Now, a couple days and a few programs latter, I wanted to try using the automatic overclocking function that my ASUS P8Z68-V Pro motherboard has. I figured before I do that I'd make a new system image. The problem is that when I go to do so the system image can't find my HDD and only gives me the option to back up to a disc. I haven't tried reformatting yet, but that wouldn't be a big deal as there really isn't anything on there yet.
wish to make a system image for my laptop. I keep getting a message to insert blank dvd even though i have one in. On contacting person who sold me laptop he informed me even though i can pan DVD's i cannot write to them it is only CD's i can write to. Is there a solution for this.
