The hard drive in my friends Dell Inspiron 15R (M501R/M5010) needs to be replaced. I have access to an older HP pavillion hard drive with identical specs (SATA, 5400 rpm, 9.4mm/70mm, etc.). Before I spend a few hours taking apart the inspiron to get to the hard drive which is not easily accessible, I want to make sure the two hard drives are interchangeable, and that there won't be any HP vs. Dell compatibility issues.
View 1 RepliesTrying to figure out what is involved in changing hard drives in a new Atg 6420 laptop. Im guessing I need to create a ghost image of current HD, but not sure how to. Once that's done do you just install new HD and reinstall ghost. It doesn't seem like it should be that difficult.
View 2 Replies View RelatedI am writing this on a new build PC with Win 7 RC installed. The problem benig I installed a small spare HD, I have got so involved in learning Win 7 and liking what I'm seeing that I got it set up great but the HD is not the one I want to use.
My other internal HD of an other PC is much larger and the one I wish to use. I don't know how/the procedure in transferring my settings files, folders from the small to the larger HD.
I have every single folder, file, emails and so on backed up on an external HD, so once larger internal HD is up and running I could restore/transfer my files/folders/e-mails/favorites that way but what about settings.
The larger HD as yet does not have Win 7 RC installed and this will have to be done first. I do not wish to partion the larger HD yet.
There are possible several effective ways to transfer everything, settings and so on from the small to the large but need the procedure explained, simple works best with me.
Or would it simply be best to install Win 7 on big HD and then transfer/restore, files,folders and so from the external back up HD.
Well as everyone using Windows RC knows, it'll be shutting down every hour or so starting in a week or so.
I've been looking at two different options. First option was to use Ubuntu 9.1.0 though I have no experience with it. Thing is I game a little and wanted to run games also. I looked into using Wine yet its not always guaranteed.
Second option was to do a clean install of Windows 7 using an OEM copy for far less than retail. Also, thing is..I might be receiving a new computer from school and was wondering how it would work out if I installed the Windows 7 OEM to this hard drive then swapped it out to the new computer. I heard you cannot change anything once the OEM is installed without calling Microsoft. Would it be possible to swap out the hard drive and put it into my new machine?
I have two 1TB drives, each containing 4 partitions, used for backing up 4 computers. These drives are regularly switched between buildings as part of our backup strategy, always having one off-site. I have assigned drive letters M,N,O,P to respective partitions. When I swap the drives, the drive letters get reset and have to be manually reassigned. assigning the drive letters, including USBDM, but get no results.
Computers: HP Compaq 8200 Elite - CMT - 1 x Core i5 2500 / 3.3 GHz - RAM 4 GB - SSD 1 x 160 GB - DVD�RW (�R DL) / DVD-RAM - HD Graphics 2000 - Gigabit Ethernet - Windows 7 Professional 64-bit - Intel vPro Technology Docking Stations: ICY DOCK MB877SK Hard Drives: SAMSUNG Spinpoint F3 HD103SJ 1TB
I have formatted my Acer Aspire 5552 and Installed Windows 7. Previously, my ''main drive'' was my Local Disk (D: ) (450GB) and now it is Local disk (C: ) (20 GB) So there is no room for my programs, etc.. so how I swap them around?Have tried to save the programs on Local Disk (D: ) , but then they do not work.
View 2 Replies View RelatedI just need your expert opinion on this matter before I call Dell back. Apparently my Hard drive went out on my new computer (6 mos.old) and, I guess a possible Motherboard problem as well, because the Dell tech told me they were sending a Hard drive & a motherboard to a service tech near me. Anyway, the tech came out with only the Hard drive. When I ask him where the Motherboard was, he didn't know anything about a motherboard.Dell did not send him one. He went ahead and installed the Hard drive & every thing seems to be working fine now for 4 days so far. My concern is, do you think my computer would still work ok if it has a faulty motherboard too? My warranty will be up in about 6 months & just want to make sure. I have a message to call Dell back & let them know how my service call went, but Just wanted your opinion before I do. Should I insist on a new motherboard?
View 6 Replies View RelatedSince there is no cd/dvd drive in a Dell Inspiron Duo1090, how is the OS reinstalled. Can it be done from a USB Drive? An external CD/DVD reader? Does the new drive need to be set up via USB from another computer? Does the DUO have to go back to Dell?
View 5 Replies View Relatedwhen im trying 2 install operating system in my laptop itwants me 2 install drive drivers
View 2 Replies View Relatedhow do i transfer from my dell laptops hard drive to desktop when monitor on lap top is dead
View 1 Replies View RelatedHow to unlock harddrive on a inspirion dell laptop service tag.
View 3 Replies View RelatedI have a dell inspirion 1505. I just upgraded my Ram and my hard drive. My computer came with a 80GB hard drive, but when i tried to replace it with a new 500GB hard drive my computer still only recognizes it as a 80GB. During the windows 7 upgrade where i would normally be able to clear my new hard drive and specify my new drives it still only showed 80 GB.
i have talked to dell twice now and i get conflicting answers each time. The first person said that my computer would only support 120GB and the second said it would only support 100GB. I have a hard time believing this because my computer came with a SATA harddrive, which shouldnt limit me.. At least i thought.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedMy friend bought a laptop with a dead hard drive, so she went on craigslist and bought a 250GB HD with windows 7 on it. The problem is the new HD was from a dell computer and her laptop is a Compaq. I know about the MB bios not being compatible and thats why the HD wont boot to windows(I'm NOT Computer Illiterate) I just need help with options. I want to know how to reformat the HD and keep windows 7 that is on it.One of the solutions I found was to download the windows 7 ISO and burn it to a DVD or a 4GB flash drive and install it that way... neither I nor my friend has a job so buying a legitimate windows 7 disk is a no go(*sigh*) and we don't have a DVD burner, so that option is a no go.
View 3 Replies View RelatedI currently have a laptop running Windows 7 Pro 64 and a Desktop running Windows 7 Pro 32. What I would like to do is do a fresh install on both PC's but install the 64bit onto the Desktop and the 32bit onto the Laptop. I know the process is easy enough, but once both are installed properly, would I run into any issue during activation or any other issues? Would there be anything I need to do before hand? (not including backing up files and such).
View 6 Replies View RelatedTwo weeks ago my laptop harddrive (Toshiba - 500GB) started to fail, so I created a system image and tried replacing the HDD with a SSD (OWC - 240GB) after getting an error I figured out I needed to use a HDD that was 500GB+ even though my system image was only a 115 GB file. So I got a Seagate 500GB drive and restored it with no problems. However, I'd still like to use the SSD so I partitioned the new C: drive down to 150GB and tried to create an system image of just the C: & System. But I'm still getting this error when I try to recover the system image to the SSD. I'm following the exact steps that I used when I restored it to the Seagate HDD.
View 1 Replies View RelatedI'm getting an eVGA e-GeForce GTX 285 soon, and I currently have a BFG GeForce 8800 GTX in my system. I usually uninstall the graphics driver I have installed, and then swap the card and install it's new driver. Is there any other "better" way, or is that pretty much the standard procedure?
Is a registry sweep recommended to get rid of any remaining driver components? Do you recommend any programs to do this?
We have a number of different laptops running Windows 7 and all have the same issue. The very first time a laptop is connected to the company network via Ethernet or WiFi (lets assume we have connected by WiFi) you receive the prompt to choose a network location. After selecting "work" the laptop can connect to the domain and everything works as expected.
Now if the WiFi on the laptop is switched off and the user try's to use the Ethernet connection the Ethernet adapter reports a "Unidentified Network". The only way to get the Ethernet adapter to discover the domain is to disable the WiFi adapter completely which our users cannot do as they do not have Admin permissions on our systems.
How can I stop Windows from swapping the VirtualBox application's memory to disk when it's idle? It's a performance issue when my guest OS looks for data and it's not available - also since it makes use of its own sawp partition.
View 2 Replies View RelatedMy understanding has always been that if you swap out a motherboard, you need to re-install the OS with board-specific drivers because the existing drivers are no longer compatible with the new hardware.Or, another example is building a new PC and using the hard drive out of an older PC that was dying to avoid having to reinstall software.....is this possible?I've heard people say that you don't need a fresh install, which makes me wonder.
View 12 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View Related