Access Dell Hard Drive Laptop From Desktop?
Jul 2, 2011how do i transfer from my dell laptops hard drive to desktop when monitor on lap top is dead
View 1 Replieshow do i transfer from my dell laptops hard drive to desktop when monitor on lap top is dead
View 1 RepliesI just need your expert opinion on this matter before I call Dell back. Apparently my Hard drive went out on my new computer (6 mos.old) and, I guess a possible Motherboard problem as well, because the Dell tech told me they were sending a Hard drive & a motherboard to a service tech near me. Anyway, the tech came out with only the Hard drive. When I ask him where the Motherboard was, he didn't know anything about a motherboard.Dell did not send him one. He went ahead and installed the Hard drive & every thing seems to be working fine now for 4 days so far. My concern is, do you think my computer would still work ok if it has a faulty motherboard too? My warranty will be up in about 6 months & just want to make sure. I have a message to call Dell back & let them know how my service call went, but Just wanted your opinion before I do. Should I insist on a new motherboard?
View 6 Replies View Relatedi took out the hard drive from my laptop that had a BSOD and can't boot. I boutght an enclosure n plugged it using usb to another laptop so i can get my files, but when i click on the disk a window pops up saying disk is not formatted..i dont want to lose my files si i downloaded tesdisk. When i choose "Analyse" it seems that it finds four partitions, but above each one there's a warning "Incorrect number of heads/cylinders 255 (NFTS) ! =240 (HD) or Bad sector head and Bad Ending Head and Bad Starting head..I dont know what to do next.
View 1 Replies View RelatedTrying to figure out what is involved in changing hard drives in a new Atg 6420 laptop. Im guessing I need to create a ghost image of current HD, but not sure how to. Once that's done do you just install new HD and reinstall ghost. It doesn't seem like it should be that difficult.
View 2 Replies View RelatedHow to unlock harddrive on a inspirion dell laptop service tag.
View 3 Replies View RelatedI have 3 computers connected via a router. A desktop running windows 7(lan cable), a desktop running XP (lan cable) and a laptop running XP (wireless).
Both XP machines can access the Windows 7 machine and edit/view files. The Windows 7 desktop can access the XP desktop. But the Windows 7 desktop CAN NOT access the XP laptop. I receive the following message.
"Documents is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions.
Not enough server storage is available to process this command"
I have tried a few things including the IRPStackSize regedit that msft goes on about, but I still can’t get it working.
how can I access my desktop (windows xp) from my laptop (windows 7)
View 2 Replies View RelatedI was wondering if it was possible to access a different hard drive on a computer via the network option on windows? All the computers on my home network are windows 7 and i'm always accessing stuff from a desktop file on my main computer to my laptop or onto my flat mates laptop/computer. I'm upgrading to a solid state pretty soon and hoping to put windows on my SSD and have all my files i'm usually sharing on my 2nd hard drive due to not having much space on my SSD. Is there any way to access a hard drive on your network that doesnt have windows 7 on? So I can access my files on my second HDD on my PC from my laptop. Normally all I can see is "Jon-PC" and that accesses the C: windows drive
View 1 Replies View RelatedSo I had windows XP installed and decided to upgrade to 7.
I moved all of my files onto HD2 which is just a 1TB storage device, formatted HD1 and installed 7.
Problem is, I can't access HD2 to get all of my files.
I can see it in the BIOS, as well as on the Device Manager but it doesn't show up in Disk Management to assign it a drive letter.
It is enabled in Device Manager, I tried updating the driver and uninstalling/reinstalling and nothing has worked so far.
I need to get the data off this so formatting isn't an option.
How to share internet access between laptop and desktop?
View 1 Replies View RelatedI just did a new build and i put my 2 storage drives from my old PC in it and installed windows on a new crucial M4 ssd.When i try to open the storage drives under my computer i sometimes get a green progress bar that takes a bit to load. I tried turning indexing off, setting folder type to general n so on and the problem still occurs. I also noticed with winamp that when i click on it and scroll down and it has to load the duration of the songs winamp becomes unresponsive for a few seconds. I use PS3 Media Server to watch my video files on my TV and it also is laggy compared to before. It takes a good 10 seconds to load the list of files and takes a while to load a file when before it was instant.
View 4 Replies View RelatedLinksys/T-Mobile Hot Spot (wireless) ROUTER with Ethernet connections to
1) Home Phone,
2) iMAC PowerPC/OS X Leopard,
3) PC/Windows 7 32bit and
4) IOMEGA HOME MEDIA NETWORK HARD DRIVE (herein "NHD").
PERTINENT SYSTEM STATUS:The NHD contains 1) a "BACKUPS" folder with sub-folders containing scheduled & unscheduled backups and system images from both computers and 2) specific folders e.g. MOVIES.Upon attempting to open the "BACKUPS" folder on the NHD from the PC, a WINDOWS SECURITY panel opens 1) requesting a user name and NETWORK password to the NHD, 2) listing the PC name as a DOMAIN name and 3) a red "X" - Access Denied.
1) As User/Administrator, I have not set any "folder" security/passwords,
2) I can open, view, edit and delete any of the other folders on the NHD from the PC and can open, view, edit and delete ALL folders from the iMAC , 3) I have NO domain setup, only a WORK GROUP name, 4) Network access protection is OFF.
after plugging in the external hard drive after a while I get you need to format the disk in F:\ do you want to format?After a while throws another warning saying F: is not accessible, Data error (cyclic redundancy check)It was working well until last week but then suddenly started giving this error message.
View 1 Replies View RelatedSo, I recently picked up this external hard drive from a friend, who was having some issues with it. From his first description I thought I would be able to solve it myself, but i1-The Hard drive, is a standard external one connected to the PC via a standard USB cable ( One regular USB connector on the PC side and a small one, I believe they are refered to as 'mini-USB Type B' on the drive's side).2-When connected to the PC it shows up like an internal hard drive, strangely, not with the external devices.3-It cannot be browsed or accessed in any other way, the windows explorer will either, load -extremely- slowly, without success, OR freeze OR simply say it cannot be accessed.4-The furthest I got in terms of interacting with it, was to uninstall and reinstall it via disk manager.
5-All other attempts fail, formatting is impossible as a right click leads to the problems described in point 3. (I tried to format after uninstalling/installing the drive, since a message came up telling me to do so, eventhough I was planning to do it anyway)6-The drive brand is completely unknown to me, it was purchased in Hong Kong and bears the label 'Buffalo'.
for some reason I am getting Access is denied when trying to access the hard drive (c.
View 7 Replies View RelatedI cant access my hard disk drive, when im trying to open it, my laptop responses that that there is no permission from administrator, there is a logo on my hard disk drive that the hard disk is shared..
View 2 Replies View RelatedI can see a generic storage device listed under the universal serial bus controllers in the device manager and am able to see the 'safely remove hardware' icon in my tray. Unfortunately, the only thing that I see in disk management is an 'unknown' disk. The hard drive is listed by manufacturer in the device manager; however, I am not able to open it from this site. And, when I look at the items 'attached' to my computer, the drive is not visible.
View 4 Replies View RelatedI'm having an annoying problem. With my desktop computer I'm unable to access the webmail login for my work website. I'm not positive, but I thought it might be due to the full version trial of Malwarebytes that I installed. I've uninstalled and reinstalled Malwarebytes using Revo Uninstaller, and now have just the standard version, and I still have the problem.
I can access my work website (except for the webmail login), but when I try to ping my work website I get "general failure" results. I also get "general failure" results when pinging the webmail login.I can access the webmail login through my laptop. The reason I think it might be Malwarebytes is because from what I remember random websites stopped loading after I opted for the full version trial.I tried disabling Windows Firewall and Security Essentials real time scanning I've tried to access the webmail login using Firefox, Chrome and IE and none worked. I've tried using my cell phone as a modem to bypass the router and that didn't work.
Now then I see someone has posted a similar issue to mine but his seems more technical than mine. What's the issue you ask? I have a laptop that is running windows 7 and can view the document folder on my vista desktop but when I try to access it, it restricts me saying I don't have access. I removed the password being required to access files. I took off the shared wizard thing on the folder I want to access (on the vista desktop) that was recommended by another user on the site.
I still can't access the files on that computer but i can access from the desktop the files on my laptop (windows 7) both are on the same workgroup but I don't know what else to do.
I have a Dell Inspiron laptop that won't connect wirelessly to my network. ALL other devices in the house (iPhones, iPads, iMac, 1 laptop and another desktop) work fine, no problems. I've tested the laptop at my girlfriend's house using her wifi and still the same problem: Limited Access.
I've ran the troubleshoot, re-booted the router & laptop, checked device manager for any exclamation marks against any drivers (none), tried disabling/enabling the driver, checked for driver updates (none), done a system restore and uninstalled my antivirus software but all to no avail.
Edit: I've tried plugging in the ethernet cable which, although not particularly straight-forward, eventually works.
Background: I have a WinXP desktop machine with a hard drive that may have a virus/trojan/rootkit/etc. Normal scans on the WinXP machine with MSE or ThreatFire have not discovered the problem. But the best way to scan a drive is to remove it and treat it as a purely 'dummy' data drive plugged into a usb drive dock and run the scan from a clean machine. This way any infected programs and/or O.S. on the drive will have no control to mask or hide themselves. My other computer is an HP Windows 7 laptop. So I removed the hard drive from the WinXP machine and via the USB drive dock and the Windows 7 laptop saw the WinXP drive icon appear. However, double-clicking that icon results in the popup window message[CODE]
View 4 Replies View RelatedThere is a unknown 'portable' device (F:/) on my computer which I dont recognize. I saw it when I was about to scan my computer with Norton and was about to select which drive I wanted to scan, if I show hidden files it also shows up under My Computer, but I cant access it.... What could cause this?
View 4 Replies View RelatedI have recently had to ditch my old computer windows xp, and bought a new Dell running windows Hoem repmium 7 (64 bit). I had a 32 bit ide external hard drive and had backed up my files there. Having got the enw copmpouetr set up I am trying to access my archived files on the 32 bit to transfer to new hard disk, but am unable to do so. Windows explorer locks up.
View 3 Replies View RelatedI have a Maxtor External Hard drive and Windows 7 Premium 64 bit. I have a user setup for each member of my family on the computer. The maxtor drive was working fine uptil I decided that I wanted only myself to be able to access it only. The drive appeared as my K drive. I went to sharing and added myself as read/write access and removed the everyone share thinking that only I would be able to use the drive. I restarted my PC and now nobody can access it. When I plug the drive into the usb slot the drive whirs up as normal but there is no drive letter for it and it does not appear in device manager etc. I plugged it into my old XP machine and that cannot read it either..
View 2 Replies View Relatedi had a virus and used norton to clean out and laptop went to blue screen and then started norton recovery, since then i cannot access the hard drive in the laptop or via a caddy. just says unable to load driver..
View 16 Replies View RelatedI have tired everything that I have seen on these forums. Perhaps I am overlooking something simple. I have gotten them to the point where I can see them on each system but when I tried to access them I get "path not valid error". The other thing is it was working before I went on vacation. I used my laptop in Florida and since I have been back I cant get on the network. I don't know what I did to get on the network the first time....
View 3 Replies View RelatedI have a Win 7 laptop and xp desktop on my network. When I try to access the xp desktop from the win 7 laptop, I sometimes get a dialog box requesting username/password. Other times I get a message box that I do not have permission to access the desktop. Other times still, everything works fine.The xp can access the laptop no problem. The laptop can always see the desktop in the network, the problem is accessing it to share files or use a printer attached to the desktop.I have no passwords on either computer. I have disabled passwords in the advanced network settings for home & work. Registry has LmCompatibilityLevel set to 3 on the laptop
View 9 Replies View RelatedMy USB Ports are showing ok, but if I put a device (datacard or flash drive) and try to access it it says "G: Access Denied". The regedit entry is also ok.
View 2 Replies View RelatedSo, I order a new custom computer and want to install my two old hardrives from my current computer. Both hardrives have lots of programs and info on them. The main on has windows 7 32 bit installed plus several programs. The new computer will have windows 7 64bit. Is it possible to install the old hard drive and access all the programs and files on it even though it has an operating system on it? Can I just transfer all those programs and files from the old one and reformat it to free space or is there a way to just remove the operation system and still access the the files and programs?
View 1 Replies View RelatedThis morning while i was watching a movie from my Toshiba 500GB external hard drive, there was a windows update going. Because of the lagging due to the update and all, I restarted it after the update is done while my ext. HD is still connected to the computer.
After restarting, somehow I can't seem to access my ext. HD even though the HD is detected. The HD somehow became a "Local Disk K:" and everytime i try clicking it a pop-up telling me that "K is not accessible. The parameter is incorrect".
I googled the problem and found one solution that told me to run a CHKDSK on the command prompt. I ran a "chkdsk /r K:" but then got stuck on the "stage 3 of 5" where the chkdsk is verifying Usn journal. This has been going on for 5 hours and the cursors still blinking.
I can access my HD again? Does the verifying Usn journal really do take this long?
I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed. It's a pretty new drive and I've never had any problems with it before. Please can someone tell me how I can start using it again?
View 8 Replies View Related