My understanding has always been that if you swap out a motherboard, you need to re-install the OS with board-specific drivers because the existing drivers are no longer compatible with the new hardware.Or, another example is building a new PC and using the hard drive out of an older PC that was dying to avoid having to reinstall software.....is this possible?I've heard people say that you don't need a fresh install, which makes me wonder.
I'm having some performance decrease on my new Build. I bought a new motherboard, Hard Drive and CPU Cooler and had to re-install windows to get my new board to work properly. I've noticed that now in League of Legends my frame rate is around 40-70 when I used to have a constant 150+ even in hectic situations where lots of things were going on at one time. I have the latest AMD Drivers, 13.1. I have tried reverting back to 12.10 to see if its the new version that's causing the problem, but its the same. [code]
I am having to install a new hard drive on a friend's computer. The thing is though, he doesn't have the install disc or even the sticker with his Vista code on it. So I wanted to know if it is possible to install a copy of Windows 7 OEM onto the new hard drive (nothing else in the computer has changed--same mobo, RAM, etc). Is this possible or will the mobo have issues with a new Windows OEM?
I'm trying to install windows 7 again after getting a new Mobo, CPU, and RAM. I'm using a HDD that already has windows on it, but I have to fresh install again. The problem is, whenever I use any kind of W7 disc, it loads the files, gets to the "starting windows" screen, and then re-boots.
Relevant info: Core i5 2300 AsRock z68 Extreme4 Gen3 2x4GB Patriot Viper 3 1600mhz WD Caviar blue HDD Acer OEM DVD player
What I've tried: New DVD player New DVD New RAM IDE/ACHA modes New HDD XP disc (It would work actualy)
What could be: CPU is bad Mobo is bad Somethings not set up right None of the tested RAM is compatible
-AMD Phenom II X4 - Mobo Gigabyte GA-880GM-USB3 - 4 GB Kingston DDR3 - Good Quality PSU (Cant remember name) - 500 GB SATA SEAGATE HD
This machine has been a total pain since I started working on it. Basicaly I cant install Windows 7 64 bits any version (no problems with DVD testesd on other machines beffore). But I could instal any 32 version, I guess there is something on the BIOS that i didnt did.
It will get as far as "expanding files" then stop at 0%, with an error saying "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation." I have tried it with multiple iso burns on different dvds from the download I got of it, redownloading it from the official downloader, and now have tried the dvd that came in the mail, to no avail.
I've built a brand new PC and decided that I would like to install windows 7 64 bit on my SSD, I got a disk+key from my university before christmas so that'd i'd be ready once i'd built it.
I built the PC yesterday and realised that I'd left my external DVD drive at my university accommodation, I'm at my parents house for christmas break so that's a few weeks left. I can't really wait that long so I used my parents laptop (which I'm posting from now) to turn the disk into an .iso and use the microsoft USB utility to make a USB stick that i could install from.
However when I tried the install gets to 'installing features' and gives 'windows cannot install required files' error code 0x80070570 I looked the code up on google which sent me to a lot of threads here, so far I've tried:
Taking all but 1 stick of ram out and the graphics card. Reseting the bios to default Installing again without rebooting after error. using cmd to select the right partition
I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
My work machine's HDD is on its way out. It currently has XP Pro x86 on it. I got a fresh new HDD and upgrade version of Win7 x64 Pro.
I booted from the Win7 x64 disc, it went through its whole install thing on the new HDD, and then when it got to the product key, it wouldn't accept the one that came in the box. I read on the web that upgrade versions must have XP or Vista already installed for it to work.
But, the 7 documentation says I have to do a Custom install if I'm upgrading from XP. A custom installation deletes whatever is on the partition, I think. So how can it work when upgrading from XP?
I have actually gone back and installed XP on the new HDD (that had its own share of problems, couldn't even get the internet connection working), and now trying to do a custom installation of 7 again. When it gets to the product key section, should I put in my original XP product key? Or will the 7 product key work this time?
I bought a PC. But the first time I tried to install Win7 x64, I got an error: "Windows cant install required files" etc. Then I removed a ram stick and it has installed successfully. But when Windows has started, everything started to stop working. I formatted after and after from different versions of windows' from different DVDs. I've bought this PC with very much of difficulties of money that i've been saving for a long time and i'm really feeling down for that kind of errors. Everything stops working and BSOD almost every 10 mins.
yesterday I had a major crashdown on my Windows 7, I tried startup repair and custom install, but it was useless..Today I decided to format the disk and make a clean install of Windows.Boot from DVD and try to install when goes to 10-20% give me this error: 0x800 7045D. Telling me that Window can't install the required files, "make sure all the files are available and restart install". I tried with a different DVD but the result is the same.I need to work and I can't install Windows.
I have been using Windows Deployment services for sometime now so the environment is not new to me. For some reason every new WIM that I build now, when I try to apply it using WDS I get this error.
My Capture Process Install A Clean Version of Windows Configure system how I want it sysprep into audit mode to remove user account that I built during setup sysprep OOBE and shutdown Run Imagex.exe /capture c: c:imagename.wim "My Image Name" /compress fast /verify I get the capture with no errors and upload to my WDS.
So I will be doing a new install of win7 pro x64 on my newly built rig. My questions should i go ahead and do the install and then install SP1 or install, get updates and wait until SP1 is pushed.I have a disk with the full SP1.
I have been getting bsods recently at first it was only when trying to play BF3 i couldnt play for more than 5 min before bsod. now its moving its way into normal functions.i will include a dx diag and cpu z .txt file Here are the reports from the time frame i recieved the bsod. Iwill also include the one i got last night before i gave up.Let me know if there is anything else I should include
I had a lot of trouble with blue screens on this system (as per profile) with a previous installation too, but never got round to dealing with it properly. So now, it's a less than week old installation that I've put very few things on yet, but crashes a *lot* when I try to run games. Does blue screen outside of this, just not as much.
The error codes vary, but most common is IRQL_LESS_OR_NOT_EQUAL.
I'm just wondering how to do a fresh install of windows 7, as it keeps freezing lately, ive tried system restore but keeps coming up that it hasn't done it...so id rather re-install from scratch again so ive got nothing on my system...Any help would be appreciated
I am getting an SSD drive & going to be doing a fresh install of Windows 7. While I understand the process of configuring your system for usage of the drive (unplug the other drives so the SSD is only one connected while installing, turning off prefetch, etc).The part I'm confused with is how to move the users folder so it defaults to the "D" drive. I get I can "Move" the folder, Add the "Location" or do the "robocopy" method & create a junction.
A new Samsung 840 pro SSD is on it's way with the courier and I will remove my present OCZ and will install a fresh Windows 7 pro. At present I have the SSD divided in 2 partitions C:system and D:Programs my first question regards the opportunity to keep the 2 partitions: is it good or bad for the SSD?
1) make an iso of partition D:programs 2) remove OCZ econnect the Samsung SSD 3) Check Uefi bios if AHCI is marked 4) Install 7 on C: (automatic alignment od the SSD) 5) Create partition D:
??Optimize?? Is it better to do it at this stage? Or after having installed various programs? I think at this stage but would appreciate your suggestions including what sort of optimization is advisable. I could eventually use RT7.Then I would copy from the iso all the programs on their own place D: and from the various distribution files will make the various setup (just for the programs to be registered in the Registry)
FInally got an SSD! Now I just need to install it onto an SSD.. could someone give me an explanation on that? My motherboard is the Asrock Z77 Extreme 4. I am currently running Windows 8 (I will update 7 to this later on down again) on a regular hard drive (slow 5400 RPM Samsung HD)
Trying to install Windows 7 and get hung up after clicking the "Install" button on boot-up using DVD. It loads for a bit, then tells me a CD/DVD Driver is required and can't be found. I've tried using the WindowsSystem32Drivers directory but it says no drivers can be found. I had to get the iso from a bit torrent; could it be I've got a 64 bit install disc and only 32 bit drivers? Maybe that's a dumb question but I'm trying to figure out why I can load the install up to that point from the DVD but it won't locate drivers.
When I try to install Windows 7 on my Dell Inspiron 1545 laptop, I get to step number 4, but when I click install I get an error saying that a required CD/DVD drive driver is missing. I know that I have the most current drivers and that my DVD drive/driver is supposed to be supported by Windows 7.Is it possible that my installation DVD is messed up?
I've just made a new fresh install of Windows 7 - 64bits (legal version). Everything was fine, all drivers were up to date.But, when I install updates from Windows Update, during the installation of the SP1 (when the screen is "do not turn off the computer"), the computer reboots, and it said that it occurs a BSOD !? I've seen nothing. According to Whocrashed, it's because of BAD_POOL_HEADER, from ntoskrnl.exe (which belongs to Nvidia I think) and e1c62x64.sys (for Intel LAN)... After reboot, Windows continues slowly its updates like everything was OK... but I wonder is that SP1 & updates have been compromised (poorly done, half or what) 'cause of this BSOD? Should I reformat the computer?Windows Update indicates that all these updates were successful...
I wiped it clean from issues of locking up. I have done 3 fresh installs of Windows 7 Ultimate 64 bit retail using all up to date drivers and everything, I have tried with CPU overclocked and normal clock. When I boot up she runs fine and then when I start listening to music off of my backup drive or browse the internet she will lock up at random, and by lock up I mean it is like im looking at a picture of my screen frozen with no responsiveness whatsoever not even the mouse moving no HDD activity ... nothing! So Ive installed the OS 3 TIMES fresh install new partitions format etc. It does it every time after I let windows update do its thing or just listen to music off the backup drive.pecs are:Windows 7 Ultimate x64 RetailBiostar A780XA2-03 Socket AM2+ MotherboardAMD Athlon 64 X2 3800 CPU4GB Ram - I have swapped sticks that I have had - ( 4 1gb sticks 533mhz)
my computer is about 2 years old. It first came with Windows vista 64. A few months ago I got a hold of a copy of windows 7 pro 32, so I wanted to check it out, even If I was going to take a hit on ram. Well now I have Windows 7 Ultimate 64, but after doing a fresh install I kept getting BSOD after the windows logo. I was able to complete the setup after removing all my ram except for one stick. The same problem persists after setup. I can boot up in safe mode just fine with all of my ram.
This PC has ran fine since 2008 when it was built. It was recently updated to Windows 7 Pro OEM. During the OS upgrade it had more memory added (4x2GB, all slots filled). Upgrade and install went flawlessly. All software (photoshop, premiere, firefox, antivirus) was re-installed without any errors or hick-ups. Upon updating firefox (I believe the timing was co-incidence) it Blue Screened. It has had issues ever since. So my last stitch effort was to back everything up and re-install Windows and hope that it fixed the problem. Needless to say that it hasn't been fixed and it still randomly blue screens. Windows Memory Diagnostic ran with no errors returned
Bought a new computer 2 weeks ago, came in 3 days ago. Been having trouble with it since. Usually I'm the "Mr. Fix-it" when it comes to PC's but I've never messed around with any debugging tools.
I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death. Tried both RAM sticks separately, took the video card out and used on-board video. I even tried both RAM sticks with on-board video separately. Unplugged the DVD-ROM, no avail. I called ASRock and got a technician who I could barely understand, but was telling me something about "XMP". I didn't see the XMP option under the DRAM configuration, even if my sticks don't support it wouldn't the option still be there? I think he has my motherboard confused with another one. He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it.
I came here to see what the BSoD DMP files REALLY have to say the problem is, so I can solve it once and for all. I didn't pay for new hardware to let it sit here and collect dust.
SPECS: Nothing is OC'd except the GPU, it was OC'd straight from the factory
Ive ran memtest86 4.0a and i found several million errors. So i scanned through 1 and 1 ramslot to try to determine which ram was giving the errors, this only resulted in 1 of my 4 ram had only 1 error? I found this weird so i thought it might be the DIMM thats corrupted.
So now i removed 3 of my rams and i only run with 1 which passed the test. Still i get unexpected shutdowns aka BSOD.
Ive tried to remove my SSD and only use my HDD back and forth , changing to IDE inside BIOS, but with no good results at all.. Ive also tried to change my PSU to a different brand, but all volts seems ok. I also reinstalled windows with USB, CD, from HDD yeah you name it, different versions... etc.. i even tried to install Windows 8 but with the same result
This all actually just started out of the blue, i have no clue how but i didnt install anything , all of the sudden i started having connection problems which resulted in BSOD.
I installed Windows 7 64-bit on my Dell XPS l501x and managed to find most of the drivers, but still have a couple of annoying little issues. Windows no longer tells me when my battery is nearly dead, it just dies when it's empty. Before the full restore I would be warned twice and then it would hibernate to give me a chance to find a plug. I still have one Unknown Device in device manager and I have no idea what it could possibly be as things generally seem to be running smoothly.Is there any way I can find out what this is?
