"Attempt To Reset The Display Driver And Recover From Timeout Failed"
Apr 1, 2011
yesterday, i got 2 blue screens in my windows 7 home premium. i have an hp envy laptop. i had updated my video driver (ati mobility radeon hd 5850) earlier in the day (although i experienced similar blue screens with my old video driver version too...the old one was also the mobility radeon hd 5850, just an earlier version). i was trying to watch an online video in internet explorer 8, and i got a blue screen. so i had to do a manual shutdown. when it started up again, i chose for windows to check online for a solution to the problem (but windows never got back to me with one, if it found it). later on, when trying to watch a Internet video, the same blue screen appeared, and once again i had to do a manual shutdown. it may be related to my ati mobility radeon hd 5850, maybe even other things which i can't be sure of...also, i mentioned that i got similar bsods with my old video driver version too. at that time, i'm pretty sure i was using firefox instead of ie when trying to watch the online videos. by the way, i was able to watch several Internet videos normally yesterday, but on one occassion i did get that bsod. also, here is what at least part of the bsod said (on both occassions yesterday): "attempt to reset the display driver and recover from timeout failed"
View 14 Replies
ADVERTISEMENT
Aug 17, 2012
Left my computer on overnight, came in this morning and rebooted from sleep mode and it started to load then I got a black screen with the message "the last attempt to resume from its last location failed - attempt to resume again? The message continues - "continue with system resume" or the other option is to "delete restoration data and proceed to system boot menu" - this is highlighted but the enter key or arrow will not activate. I have the original Windows 7 ultimate disc but it will not boot it up, also cannot access safe mode with f8. I have an accounting package for my business on this computer and cannot lose it.
View 2 Replies
View Related
Jul 3, 2011
Its gotten kinda annoying to cancel out of that windows error msg and retry a wifi connection, is there something that can auto-retry it?
View 7 Replies
View Related
Jan 2, 2012
my pc is a i7 2600 with an asus p8h67 mb, 16gb 1333mzh of ram and a ati hd 6790,xfx gpu.i play battlefiled 3, deus ex, f1 2011 in high for hours and hours without a any problem, this runs fine.but when i see an movie in windowns media player or other video player i the screen freezes and i receive the messege "the amd display driver stop to work and has recover successful.it happens only in windows media player ou any other player. in videos att Internet and others (redtube, xvideos ) the computer runs fine, without a error.
View 1 Replies
View Related
Oct 2, 2009
When I was installing the 64bit drivers for Windows 7 it gave me the following log after installing the Catalyst Control Center. The Ati Display Driver failed to install properly.
View 4 Replies
View Related
Sep 6, 2011
hi..am using dell xpsL502x my configuration is 6gb ram 1gb nividia graphics card and 500gb hd..am a multimedia student am using after effects cs4 while using this after few min my screen turns into black screen and an error occurs "display driver (nividia) stopped responding and successfully recovered.." i re-installed my drivers lots of time but again am getting the same error
View 1 Replies
View Related
Mar 13, 2012
I am having this problem where my monitor just goes blank and then a few seconds my desktop comes back as it was before. I have been getting a message sometimes after it happens saying something like the display driver failed but has now recovered. I had a more severe version of the problem just a little while ago where the monitor had gone to sleep and I could not wake it with the mouse. I actually had to reboot to make it work again. I've looked in device manager and looks ok there, This is a very new computer and has just had a fresh install a couple of days ago so I cant see it being anything major.
View 4 Replies
View Related
Jan 23, 2013
I forgot my password on the welcome page on my toshiba A665-S5173 laptop, which makes one of the user accounts useless.
View 5 Replies
View Related
Jan 2, 2012
my pc is a i7 2600 with an asus p8h67 mb, 16gb 1333mzh of ram and a ati hd 6790 xfx gpu.i play battlefiled 3, deus ex, f1 2011 in high for hours and hours without a any problem, this runs fine.but when i see an movie in windowns media player or other video player i the screen freezes and i receive the messege "the amd display driver stop to work and has recover successful" it happens only in windows media player ou any other player. in videos att Internet and others (redtube, xvideos ) the computer runs fine, without a error.
View 1 Replies
View Related
Mar 8, 2011
I downloaded IE9 which failed miserably. Cant recover to old version. The problem was I had to download and run WindowsActivationUpdate.exe My vesion of windows is genuine but now I have Windows evaluation copy text on my desktop and no way of validating to remove it.
View 9 Replies
View Related
Nov 3, 2012
I was using recovery manager to reset my laptop (ACER 5470G) back to factory settings. The image failed to copy across. I then got Boot Mgr is Missing - I have tried, everything it states on the internet and even bought some software WIN RE to carry out the recovery but nothing works. I have tried to reinstall W7 ISO and W7 full installation software but it all has failed. The message i get with the full install disc and iso is that the system i have to select a drive PQ, F and C, the only option I have is C, but when I try it states it can't do it. I tried Ubuntu and it did work, so I presume the HDD is ok. I did have Zone Alarm Data-lock installed on it and I don't know if that is preventing the re-install. I tried to install XP, but that just dies out.
View 1 Replies
View Related
Jun 20, 2011
I have a Dell Inspiron 1012 running Windows 7 Starter SP1 and I've got it hooked up to my Protron 42" LCD screen with HDMI cable. I changed the flicker rate to 70 Hertz without checking the Proton's maximum flicker rate - yeah, that's really SMART - so now I've got an issue with my external display.It worked okay for second but then my laptop screen turned black and the external display reads "Signal Out of Range" (duh, the Protron works only up to a 69.8 Hertz flicker rate, which I SHOULD have checked BEFORE changing it, but what's done is done -_-).Now, when I plug in the HDMI cable, my laptop screen goes to black and the external display still reads that same message. I can't change the flicker rate without seeing the menu on my laptop screen.
View 3 Replies
View Related
Feb 8, 2012
I have been working with RW2 files on this PC without problems for 6 months and all was normal last night when I shut down as normal. This morning I switched on to continue my work and the window with RW2 files showed just blank icons. I clicked on one and got the message "unable to open this file type, no supporting program" or similar, usually it opens a preview window at the side and will open in Windows photo viewer with a double click, but now nothing. JPG files still display and work fine and all the RW2 files open normally in lightroom 3.6 when I open that. I rebooted but the problem persists. I then looked at system restore and there were no restore points for this month and it gave a list of 5 programs it would erase, which I had updated/installed a few days earlier so I decided to look for another way first (I have very bad internet so do not want to have to download those again). Everything has worked fine with those updates for several days so I suspect it has nothing to do with them.
View 2 Replies
View Related
Apr 28, 2012
Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space. Got "Page Failed to Load" error attempting to change my Windows 7-64bit display resolution. This used to work, but no more ( don't know what might have caused it). I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.
View 2 Replies
View Related
Aug 19, 2012
my computer always display a message "display drivers has stopped working and recover"
View 1 Replies
View Related
Aug 9, 2011
my laptop is stuck on the screen attempt to resume again & i can't get off of it. it won't let me move throughout both options. not sure where to start with this one.
View 11 Replies
View Related
Aug 1, 2010
My Canon MF3240 laser printer is causing a timeout delay in Windows 7, when completing the loading of the desktop when booting (cold or warm). Long Explanation: When starting the computer, Windows will load normally to the desktop with near complete functionality. But there is a delay of 60 seconds while something tries to initialize or load. During this delay the blue spinning circle ("Working") can be seen over the Network icon in the systray, and over the Currency & Weather gadgets, and in Windows Explorer at the major headings.While the "Working" icon is showing I can open the browser and I have internet access. But I can't open task manager or use Windows Explorer until "Working" is done. The condition was first noticed after I uninstalled my old Canon MP780 printer and replaced it with an Epson Artisan 810. The Canon MF3240 was already installed before this change. I always suspected the Epson printer had corrupted something. This weekend I finally got around to removing all the printers, cleaning up, and reinstalling the printers. I reinstalled the Epson first (using correct W7x64 drivers) and all was good. Windows boots right up onto the desktop and everything is connected - no delays. Then I reinstalled the MF3240. Bang - right off - the delay condition.Now, if I unplug the USB cable for the MF3240 and boot (cold or warm) the delay goes away. What do you think is going on here? More Info: The original installation of the MF3240 was done when I first installed Windows 7. I was new to Windows 7 and there was some thrashing about to get the printer set up, I recall. I finally got it working by manually installing the drivers. These were XP-2000 drivers, best I can tell.
The driver I just installed for the MF3240 is MF3200_MFDrivers_Win_x64_us_EN_7 . I got these drivers from the Canon website for my printer, but I can't remember exactly when, but it was a while ago. I never installed these drivers before. Today, on that website, the only Windows 7 driver available is MF3200_MFDrivers_Win_x32_us_EN_7.exe ". Actually, that is the only driver for all Windows OS's. Also, the downloads above do not contain an installer package, only the .inf's and .cab's. If I knew then what I know now, I would plug in the printer, Windows would not find a driver, I will browse to the folder with the drivers, and the x64 drivers are installed. On the reinstall Windows found drivers and installed them automatically when I plugged the printer in. I had to go to the printer's properties and update the drivers to the x64 version. However, the delay condition happens in either version of the driver that I had installed.
View 5 Replies
View Related
Jun 27, 2011
I am experiencing issues with explorer.exe (I found many reports on the web on this), not showing drives or control panel icons, or stop responding (win 7 32 bit Ult.) I set to open a separate process to explore windows and I got the chance to look for a better file manager and got Directory Opus and set it as the default file manager. (I use a Dell Precision notebook with certified hardware).
The explorer is still used for some windows, mainly control panel and device and printers. If the process stands there for a while, at some time, it will start to create issues. With a new 2nd explorer.exe is quite sure it will work. Checking the task manager I see that the 2nd explorer.exe waits for about 45 s to exit after the last windows close. The overall impact is quite reduced as I do not use explorer to browse files, but I would know if there is a place where I could set a shorter delay to close explorer.exe after the latest window closes.
View 9 Replies
View Related
Jul 20, 2012
I have two brand new L702x's which are both playing up.when the screen turns off, as per the timeout set in power options, "Turn off the display", it won't come back on until I press ctrl alt del. Even when an external screen is plugged in, it doesn't come back on but the second screen does....
View 9 Replies
View Related
Dec 11, 2012
i performed multiple googles. but for the life of me i can not find the regedit for the value that controls the timeout for programs that "appear" to be unresponsive. the exact problem.is that when a game is loading a map or something that like midway the games window title bar displays the Not Responding. and if you click it dulls out and window and brings up that prompt to end the program or wait for it to respond.
i know there is a regkey for a value somewhere that tells w/e windows uses to classify a program as not responsive in milliseconds. or some odd measure of time.
i just need the regkey for the timeout value. god i hope someone knows what i am talking about.
View 4 Replies
View Related
Jun 22, 2011
I have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with around 8 other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. The error message is something like \PCNAME is not accessible. The user can connect if the machine storing the files is restarted but it will happen 4-5 times during the day.
View 3 Replies
View Related
Sep 16, 2012
I have a Z77 mobo with a new SDD and a HDD from the old PC. At first I installed Windows 7 to the SDD and I could only boot into it when I disconnected the HDD. When I started PC, the logo was shown for a second or so, and then it went into repair mode, the "preparing installation files" progress bar ran twice and the system booted into GRUB that was left on the HDD. I've tinkered in BIOS a lot trying to fix this, but to no avail.Now I've decided to also install Linux (OpenSUSE 12.2) to the SDD, and hoped that GRUB2 would solve my problems. Nope, it didn't detect my Windows 7 at all! (however, it did detect the two(?) old Windows 7 mount points from the HDD). I couldn't even get to boot it by forcing "Windows Boot Manager" from BIOS. I tried to fix this with DVD repair, at first I couldn't get it to work by launching the DVD in UEFI mode, the other one worked, but it only messed up my GRUB2 and I couldn't boot to either system. After some unsuccesful tinkering with bootrec, I found this thread and followed what OP and the best answer guy did, which sums up roughly to this:
Code: C:> bootsect /nt60 C: /force
C:> diskpart
DISKPART> select disk 1
DISKPART> select partition 3
DISKPART> active
DISKPART> extend filesystem
DISKPART> exit
C:> bootrec /rebuildbcd
Then, Windows Repair detected my installation and said it fixed the problem. Now I still can't boot into my system normally (again, it reboots after "Windows is loading files"), however, I can get it to boot after the timeout ("Press any key to boot from DVD") from Windows 7 installation disk! I have no idea what's going on.Here is a screenshot from diskmgmt: The strange thing is the 128MB partition - I suppose this could have been MSR partition, while gparted shows it's a Linux partition! Is this possible, that OpenSUSE installer messed it up?
Also: Code: C:Windowssystem32>bcdedit /v
Windows Boot Manager
--------------------
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
path ootmgr
[code]....
View 2 Replies
View Related
Apr 10, 2012
How to Change the Return to Sleep Timeout for a Unattended Wake Up in Windows 7 ?
View 0 Replies
View Related
Jan 28, 2012
I have a Toshiba Laptop that after installing Dragon speech hardware somehow after shutting down my laptop it lost the password.Therefore I cant boot my laptop. How ca I reset my password without having a flash drive equipped with a reset wizard?
View 2 Replies
View Related
Feb 20, 2012
I'm trying to reset the popup blocker in explorer but can find tools to do the reset.
View 2 Replies
View Related
Mar 23, 2011
I am going to be getting 2 new WD10EALS drives in the next day or so. My plan was to put them in raid using the onboard ICH10R controller on my mobo (an ASUS Sabertooth X58). I had wanted to run WDTLER to turn TLER on, but after reading some reviews it seems I might not be able to as it is reported WD disabled TLER on these drives completely.
Im curious if there is a way to change the timeout for the drives in the matrix storage controller? So if I do have an issue my raid won't die (I'll be using these drives in raid 0 for gaming only). I dont care about the data, I just don't want to have to go thru the hassle of reinstalling the games should a drive get dropped from the array. I am thinking about getting a wd green 2tb drive for backups but just curious if there is a way to change timeout via the controller.
edit: And by change timeout I mean how long the controller waits for the disk before dropping it from the array, like could i set it too 2.5 mins just to be sure?
View 1 Replies
View Related
Jan 15, 2013
This is my situation: I have a virtual machine running, and a network drive which is mapped to that machine.The problem here is that when I am trying to login on windows, windows is first trying to connect to that mapped network drive - which it cannot because my virtual machine has to start up first. This results in a rather long login-time.So my question is, is there some (registry) setting which allows me set this connection timeout to 0? Or that it won't automatically reconnect the drive at login? Of course the setting 'Do not automatically reconnect at login' is too obvious and does not work, because it also removes the whole mapped network drive at system restart - in my situation the drive should be there, just not connected
View 3 Replies
View Related
Feb 3, 2013
Dualbooting Ubuntu Lucid and W7 on a home-built box with a WD 500GB SATA HDD. Well, except today, no boot. Have connected the HDD to my spare box to retrieve the ext3 files from the Ubuntu partition, mostly some flac, mp3s, and pngs and jpgs, without success.
Firstly, how can I access those files? My spare box is also running Lucid. Seems that this would be easier, idk.
Secondly, should I attempt to repair? Or is a clean reinstall/reformat/repartition a better alternative?
View 4 Replies
View Related
Jun 15, 2012
My CD/DVD-Rom drive is unresponsive (it opens and closes normally) and does not show up on Device Manager.I read a guide that suggested that I have corrupted registry entries. It told me to delete UpperFilters and LowerFilters.I deleted the two entries (and possibly others in the same location).
Good news: I backed up my registry
Bad news: I backed up my ENTIRE registry (oops)
So far, everything appears to be the same... Except when I open iTunes I get an notice that says the registry settings needed to burn and import CDs are missing.I've been told that I can import the entire .reg backup and "hope that all goes well". It sounds rather sketchy and I am seeking better help.I've also been told that a wire could have come loose but I want to fix this registry problem before opening up my PC. I hope it doesn't come off as leaching by coming here solely for making a help thread.
View 5 Replies
View Related
Oct 7, 2012
I have a Lenovo z360 laptop that runs Windows 7 Home Premium x86 on an Intel core i3 processor. When I turned it on last Friday, the Windows logo showed for around 5 minutes then the BSOD flashes. Technical information:UNMOUNTABLE_BOOT_VOLUME 0x000000ED (0x87E0D798, 0xC0000183). I put in a repair disk and chose to use cmd so that I can chkdsk /r C:. After it successfully checked, I decided to also chkdsk D: so I wouldn't need to go past the recovery options menu again. It took around 5 hours before my maid unplugged it while cleaning, so it died while I was eating. I charged it somewhere else when my brother discharged it to use the desktop computer. He said that it said "Deleting index entry from index $0 of ... 25" when it died again. When I booted it again, it still shows the windows logo for 5 minutes but restarts with no blue screen
View 1 Replies
View Related
Apr 27, 2012
My bluetooth folder was open with mobile phone paired with PC. Windows explorer sometimes shows up yellow bar for extra advice or information. this time, the bluetooth (mobile) folder had required permission to "get content from internet" or something like that I didn't read good and rushly pressed YES button to automatically do this option. by accident. (is not virus, no virus found at all with germany top antivirus software) I tried to find this setting elsewhere but it seems nothing has changed. Must be some hidden setting. very difficult to find.
View 1 Replies
View Related
