Program Not Responding Timeout Reg Edit
Dec 11, 2012
i performed multiple googles. but for the life of me i can not find the regedit for the value that controls the timeout for programs that "appear" to be unresponsive. the exact problem.is that when a game is loading a map or something that like midway the games window title bar displays the Not Responding. and if you click it dulls out and window and brings up that prompt to end the program or wait for it to respond.
i know there is a regkey for a value somewhere that tells w/e windows uses to classify a program as not responsive in milliseconds. or some odd measure of time.
i just need the regkey for the timeout value. god i hope someone knows what i am talking about.
View 4 Replies
ADVERTISEMENT
Dec 23, 2012
I use the Media Centre TV listings to record shows, but sometimes the guide lists information for a different episode than the one that is being aired. I am recording broadcast TV over the air. Is it possible to edit this information so that it is for the show actually aired? Even being able to edit the episode title and the original date aired would be a help in keeping track of what I have already recordrd.
View 1 Replies
View Related
Feb 16, 2012
I've had a long-term, nagging problem in which my programs frequently hang.I receive the message, "Program Not Responding, when this occurs. Typically, after about a 10-20 second delay, the command will be successfully executed. Among the programs in which this commonly occurs are Internet browsers (IE and Firefox) and Microsoft Word.I have a 64-bit Dell Studio XPS 8100 desktop computer running on Windows 7.
View 2 Replies
View Related
Sep 8, 2012
When I open files I get program not responding. If I wait long enough it will come on sometimes a couple of minutes .
View 1 Replies
View Related
Jan 10, 2013
why do I always get program not responding, I'm running windows 7 home premium spk1 3GB ram dual core dell piece of crap inspiron.
View 3 Replies
View Related
Oct 16, 2012
whenever i try to minimise any application in my windows 7 ultimate dell vostro laptop, the window does not minimum and the laptop freezes for sometime and the top of the window reads 'Not Responding'.also the laptop has become very slow and takes time to startup and shutdown.
View 2 Replies
View Related
Jun 29, 2012
Using Windows7 and IE8 32-bit I am constantly finding that the program stops responding and I have restore the last sesion, or worse still start again. Happens on both my home PC and my office PC, so its not the PC at fault. For example, today, trying to post this discussion took 8/9 restarts
View 10 Replies
View Related
Apr 25, 2011
Im having problem with MSE turning it self off and not responding to the turn on button on the program and freezing my pc . it doesnt happen all the time but is becoming more of a problem can anyone help ?
View 1 Replies
View Related
Nov 27, 2011
Everytime i start my computer and after putting my password, at the desktop, a box appears saying that program manager stops responding and it is needed to restart the pc. it does it ( by himself ) and it is a cicle that dont stop, only if i manually close
View 9 Replies
View Related
Nov 19, 2012
i have installed windows 7 in may sysytem a few monts ago and since then each time i install a program the program works fine but after two or three restarts it give an error that the program has stopped working and give me two opptions (1)check online for more solutions(2)close the program and when i go to more details its says that the problem name is:APPcrash
my system is a 1 GB ram +2.66 GHZ processor+80 GB HDD+an Aopen mother board
View 1 Replies
View Related
Aug 1, 2010
My Canon MF3240 laser printer is causing a timeout delay in Windows 7, when completing the loading of the desktop when booting (cold or warm). Long Explanation: When starting the computer, Windows will load normally to the desktop with near complete functionality. But there is a delay of 60 seconds while something tries to initialize or load. During this delay the blue spinning circle ("Working") can be seen over the Network icon in the systray, and over the Currency & Weather gadgets, and in Windows Explorer at the major headings.While the "Working" icon is showing I can open the browser and I have internet access. But I can't open task manager or use Windows Explorer until "Working" is done. The condition was first noticed after I uninstalled my old Canon MP780 printer and replaced it with an Epson Artisan 810. The Canon MF3240 was already installed before this change. I always suspected the Epson printer had corrupted something. This weekend I finally got around to removing all the printers, cleaning up, and reinstalling the printers. I reinstalled the Epson first (using correct W7x64 drivers) and all was good. Windows boots right up onto the desktop and everything is connected - no delays. Then I reinstalled the MF3240. Bang - right off - the delay condition.Now, if I unplug the USB cable for the MF3240 and boot (cold or warm) the delay goes away. What do you think is going on here? More Info: The original installation of the MF3240 was done when I first installed Windows 7. I was new to Windows 7 and there was some thrashing about to get the printer set up, I recall. I finally got it working by manually installing the drivers. These were XP-2000 drivers, best I can tell.
The driver I just installed for the MF3240 is MF3200_MFDrivers_Win_x64_us_EN_7 . I got these drivers from the Canon website for my printer, but I can't remember exactly when, but it was a while ago. I never installed these drivers before. Today, on that website, the only Windows 7 driver available is MF3200_MFDrivers_Win_x32_us_EN_7.exe ". Actually, that is the only driver for all Windows OS's. Also, the downloads above do not contain an installer package, only the .inf's and .cab's. If I knew then what I know now, I would plug in the printer, Windows would not find a driver, I will browse to the folder with the drivers, and the x64 drivers are installed. On the reinstall Windows found drivers and installed them automatically when I plugged the printer in. I had to go to the printer's properties and update the drivers to the x64 version. However, the delay condition happens in either version of the driver that I had installed.
View 5 Replies
View Related
Jun 27, 2011
I am experiencing issues with explorer.exe (I found many reports on the web on this), not showing drives or control panel icons, or stop responding (win 7 32 bit Ult.) I set to open a separate process to explore windows and I got the chance to look for a better file manager and got Directory Opus and set it as the default file manager. (I use a Dell Precision notebook with certified hardware).
The explorer is still used for some windows, mainly control panel and device and printers. If the process stands there for a while, at some time, it will start to create issues. With a new 2nd explorer.exe is quite sure it will work. Checking the task manager I see that the 2nd explorer.exe waits for about 45 s to exit after the last windows close. The overall impact is quite reduced as I do not use explorer to browse files, but I would know if there is a place where I could set a shorter delay to close explorer.exe after the latest window closes.
View 9 Replies
View Related
Jul 20, 2012
I have two brand new L702x's which are both playing up.when the screen turns off, as per the timeout set in power options, "Turn off the display", it won't come back on until I press ctrl alt del. Even when an external screen is plugged in, it doesn't come back on but the second screen does....
View 9 Replies
View Related
Jun 22, 2011
I have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with around 8 other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. The error message is something like \PCNAME is not accessible. The user can connect if the machine storing the files is restarted but it will happen 4-5 times during the day.
View 3 Replies
View Related
Sep 16, 2012
I have a Z77 mobo with a new SDD and a HDD from the old PC. At first I installed Windows 7 to the SDD and I could only boot into it when I disconnected the HDD. When I started PC, the logo was shown for a second or so, and then it went into repair mode, the "preparing installation files" progress bar ran twice and the system booted into GRUB that was left on the HDD. I've tinkered in BIOS a lot trying to fix this, but to no avail.Now I've decided to also install Linux (OpenSUSE 12.2) to the SDD, and hoped that GRUB2 would solve my problems. Nope, it didn't detect my Windows 7 at all! (however, it did detect the two(?) old Windows 7 mount points from the HDD). I couldn't even get to boot it by forcing "Windows Boot Manager" from BIOS. I tried to fix this with DVD repair, at first I couldn't get it to work by launching the DVD in UEFI mode, the other one worked, but it only messed up my GRUB2 and I couldn't boot to either system. After some unsuccesful tinkering with bootrec, I found this thread and followed what OP and the best answer guy did, which sums up roughly to this:
Code: C:> bootsect /nt60 C: /force
C:> diskpart
DISKPART> select disk 1
DISKPART> select partition 3
DISKPART> active
DISKPART> extend filesystem
DISKPART> exit
C:> bootrec /rebuildbcd
Then, Windows Repair detected my installation and said it fixed the problem. Now I still can't boot into my system normally (again, it reboots after "Windows is loading files"), however, I can get it to boot after the timeout ("Press any key to boot from DVD") from Windows 7 installation disk! I have no idea what's going on.Here is a screenshot from diskmgmt: The strange thing is the 128MB partition - I suppose this could have been MSR partition, while gparted shows it's a Linux partition! Is this possible, that OpenSUSE installer messed it up?
Also: Code: C:Windowssystem32>bcdedit /v
Windows Boot Manager
--------------------
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
path ootmgr
[code]....
View 2 Replies
View Related
Apr 10, 2012
How to Change the Return to Sleep Timeout for a Unattended Wake Up in Windows 7 ?
View 0 Replies
View Related
Mar 23, 2011
I am going to be getting 2 new WD10EALS drives in the next day or so. My plan was to put them in raid using the onboard ICH10R controller on my mobo (an ASUS Sabertooth X58). I had wanted to run WDTLER to turn TLER on, but after reading some reviews it seems I might not be able to as it is reported WD disabled TLER on these drives completely.
Im curious if there is a way to change the timeout for the drives in the matrix storage controller? So if I do have an issue my raid won't die (I'll be using these drives in raid 0 for gaming only). I dont care about the data, I just don't want to have to go thru the hassle of reinstalling the games should a drive get dropped from the array. I am thinking about getting a wd green 2tb drive for backups but just curious if there is a way to change timeout via the controller.
edit: And by change timeout I mean how long the controller waits for the disk before dropping it from the array, like could i set it too 2.5 mins just to be sure?
View 1 Replies
View Related
Jan 15, 2013
This is my situation: I have a virtual machine running, and a network drive which is mapped to that machine.The problem here is that when I am trying to login on windows, windows is first trying to connect to that mapped network drive - which it cannot because my virtual machine has to start up first. This results in a rather long login-time.So my question is, is there some (registry) setting which allows me set this connection timeout to 0? Or that it won't automatically reconnect the drive at login? Of course the setting 'Do not automatically reconnect at login' is too obvious and does not work, because it also removes the whole mapped network drive at system restart - in my situation the drive should be there, just not connected
View 3 Replies
View Related
Jul 26, 2011
I just found this event viewer error: The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout.
View 4 Replies
View Related
Apr 1, 2011
yesterday, i got 2 blue screens in my windows 7 home premium. i have an hp envy laptop. i had updated my video driver (ati mobility radeon hd 5850) earlier in the day (although i experienced similar blue screens with my old video driver version too...the old one was also the mobility radeon hd 5850, just an earlier version). i was trying to watch an online video in internet explorer 8, and i got a blue screen. so i had to do a manual shutdown. when it started up again, i chose for windows to check online for a solution to the problem (but windows never got back to me with one, if it found it). later on, when trying to watch a Internet video, the same blue screen appeared, and once again i had to do a manual shutdown. it may be related to my ati mobility radeon hd 5850, maybe even other things which i can't be sure of...also, i mentioned that i got similar bsods with my old video driver version too. at that time, i'm pretty sure i was using firefox instead of ie when trying to watch the online videos. by the way, i was able to watch several Internet videos normally yesterday, but on one occassion i did get that bsod. also, here is what at least part of the bsod said (on both occassions yesterday): "attempt to reset the display driver and recover from timeout failed"
View 14 Replies
View Related
Jun 30, 2012
I wonder if on Windows 7 64 bit they did away with the venerable old DOS edit.com or edit.exe (I forget if it was ever an exe file, seems like it was). I know it was there in Windows 7 32 bit.I can't find it anywhere on my new HP dv7 laptop. I can use textpad I guess but for quick and dirty editing of a new file, I found edit to be perfect.
View 1 Replies
View Related
Feb 3, 2012
Have a scroller box installed via Ie 7 on my website, but can't edit it using Windows 7 and IE9 on new computer. Have tried pushing the f12 compatibility button but doesn't help. Have read I can't install IE7 with windows 7 either. Also have a laptop which has Windows Vista and IE9..does Vista work with IE7 if I uninstalled IE 9 on laptop? or is there another way around being able to edit this scroller box constructed in IE 7?
View 8 Replies
View Related
Jun 9, 2012
In The Red Square Sorry For Much Question From Me In This Website.
View 1 Replies
View Related
Aug 16, 2012
I have been wondering for a while, what if theres a game and i want to edit it's dll files or exe files? theres a game called amnesia and i want to add a extra button on the game's launcher, but i do not know how, i managed to download a couple programs that can do things like take the exe appart, or read some dll files but not with much success, if i take appart the exe i get 3 files, .text, .data, .rdata, and a folder called .rsrc with icons of the exe in it, i see the icons, sadly i havent found any way of opening the text or data files, the dll files ive managed to open, read and edit save, but then it doesn't change anything or if i modify the exe code it saves but then doesn't launch
View 4 Replies
View Related
Mar 21, 2011
how to edit pictures like in the commercial where the lady actually cuts out the head of her child and pastes in a new one. Any know how to do that? i just installed Windows 7 Home Premium 64bt on a new pc.
View 2 Replies
View Related
Jun 7, 2012
i have some pdf document,and i want to delete some pages from it and want to make fonts of text smaller.it has 190 pages and i want to make text smaller so it could fit around 100 pages.
View 9 Replies
View Related
Feb 24, 2011
on a continuos 1 hour cd of live music how do i cloose the space between songs i used to do this but forgot how
View 1 Replies
View Related
Jul 4, 2012
How do I edit config.sys for a Microsoft Flight Simulator aircraft?
View 1 Replies
View Related
May 13, 2011
I send in cricket match reports to our local paper. Last season I had an XP machine and I used to copy and paste the scoresheets from our website into Word. Here's a typical scoresheetI used to copy the scoresheet and paste it into Word, edit it and send it off as part of the report. The newspaper could also copy and paste it at their end. Fine.Now I have a Win 7 machine and, I may be incorrectly blaming this on the OS, I can copy the scoresheet into Word but I get an uneditable block, looking only vaguely like the scoresheet I copied.I imagine that there is just some "tick" I haven't put in a box somewhere but it would make a massive difference if I could find that box.
View 5 Replies
View Related
Jun 1, 2012
I have found a file named 'Card_content.xml' in my Nokia Memory Card (Fat Volume). When I try to open it with Notepad, it shows 'Access Denied'. I can not open, rename, copy, move, delete this file. I can see the content of this file using 'DiskInternals Linux Reader'. The Properties Dialog shows that this file has an attribute 'RHAX'. R - Read-only, H - Hidden, A - Archive, But what the 'X' denotes for. Please note that Properties Dialog does not have any column named 'Owner'. I am not able to change its attribute using CMD, CHMOD (coreutils) and other utilities. What the 'X' denotes for? How can I set or edit 'X' attribute of a file?
View 3 Replies
View Related
Dec 16, 2009
is it possible to edit Ctrl+Alt+Del screen "links" and its position?
I would like to add for example "Shut down", "Restart" instead of "Lock this computer", "Switch user", and would like to move it to the right:
MS paint preview
If that is impossible, then maybe it is possible to get rid of Ctrl+Alt+Del screen at all and instead of it, like in windows xp, would appear task manager?
View 6 Replies
View Related
