Error Code 0x8000ffff In System Restore
Feb 7, 2012
Computer was running fine until I used a safe mode windows firewall sweeper in order to get rid of this nasty Trojan horse. The program ran fine and it delete just the Trojan horse "no other program or files were removed" I've tried several times to system restore but still the same error message.
Is it possible it did something to my registry and can clear CMOS work to fix it? I cannot get past the system restore screen and the bios screen can also get command prompt.
View 9 Replies
ADVERTISEMENT
Nov 14, 2011
I have spent several intense days trying to figure out file sharing and networking. Yesterday I deleted all documents from the Document Library. I did not think they were literally in that location. Whatever they are all gone. I wondered if I could restore and get them back. Some of them did come back after the first restore. Then I thought I should just restore to about two weeks ago and I would undo all the changes I have been making and could start over. This is what I get.
Can not find Drive C:? I opened My Computer and looked at the Properties of Drive C: for some insight. I found a tab that said Restore previous version. I get a nice list of previous versions that I can open or copy but the restore button is not enabled. I was able to open one of the versions and copy My Documents and I got all my deleted documents back. I saved them to a different drive. What I need to do to get my restore function back on line in case I need to use it later?
View 4 Replies
View Related
Sep 14, 2012
My friend has a fairly new Sony computer, when he turns it on it comes up with the windows 7 logo and then after that is stuck on a black screen.
I have tried pressing f8, repair your computer then system restore however I keep getting the 0x8000ffff error. I have tried a few different restore points but still the same.
View 9 Replies
View Related
Dec 23, 2011
"an unspecified error occurred during system restore (0x8000ffff)"I made a restore disk on my 64bit win7 desktop for my 64bit win7 laptop because windows stopped loading. Now when I try different restore points I get the same problem. Should I make a new disk? What else could I try?I have a normal stock dell desktop with windows 7 borrowed my grandmothers laptop. It is an Acer Aspire 5736Z-4790 w/ anIntel Processor. Last night after trying to install some files to make some cheat programs I use for an online game (I have loaded same programs 10x on other computers so I doubt its related to the programs themselves) One thing I did do was try to delete a winhttp.dll file in system32 or the WOW one(for 64bit computersorget the folders name)and replace it with another one(Directions for the cheats said to make sure that winhttp.dll was in sys32) and while trying to do that windows would not let me so I read somewere that there is a program that lets you "take ownership of a file" so you can override permissions. I then took ownership of sys32 and maybe the 64bit folder as well. It still did not let me replace any files in sys32 so I then restarted and when windows opened again, desktop loaded then an error message came up, then it restarted itself, and repeated, but after the second time it restarted itself windows would not load. After the Acer anufacture screen, just the blank black screen with the blinking line.
View 1 Replies
View Related
Oct 13, 2011
I am getting an error while installing batman Arkham Asylum. The details of the error and of my system are given below:
Error Code: -5011 : 0x8000ffff
Error Information:
>KernelObjectWrapper.cpp (498)
>KernelObjectWrapper.cpp (311)
>KernelIScriptWrapper.cpp (80)
>KernelObjectWrapper.cpp (197)
[code]....
View 6 Replies
View Related
Oct 27, 2012
I am trying to rectify the error with windows update. Everytime I try to update it tells me it is checking for updates...Then "To check for updates, you must first install an update for Windows Update. Your automatic Updating settings will not change." I click Install now and get "Window could not search for new updates"An error occured while checking for new updates for your computer. Error(s) Found Code 80070643 Windows Update encountered an unknown error.
This problem first came to light a year ago when I downloaded a windows update that was corrupt.It forced the computer to loop the autocheck upon boot and could only be started in safe mode or by canelling the check.After looking through the forums I found an interim fix which disabled the autocheck and since have always recieved the message upon restarting "Autocheck program not found".I naturally thought this issue would be resovled in the next update and or a future fix.I had to go away for work at the start of this year and when I got back and windows updated it still had the autocheck message.Recently I have been unable to update at all due to the aforementioned error. The simplest soultion it would seem would be to do a system restore, this I have tried however every possible point seems to have a corrupt file on it.I ran a scan using Malwarebytes and found nothing.I don't want to format as the programs came pre installed and that would mean taking to back to the shop.
View 9 Replies
View Related
Oct 17, 2012
I am trying to turn of VSS on the drive that I use as my parity drive for my flexraid configuration. However, when I click on System Protection from Control Panel I get an error that says:There was an unexpected error in the property page:Catostrophic Failure (0x8000FFFF)Please close the property page and try again.I have looked for solutions online and the most common seemed to be run scannow rom the command prompt.I did that and it said it fixed some errors. I have rebooted multiple times and still get the same error.
View 2 Replies
View Related
Jan 22, 2012
Trying to restore Emachine E28 laptop.After last install disk runs I receive the following message:Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)Have tried almost everything I can think of but no results.
View 5 Replies
View Related
Nov 23, 2011
I'm trying to restore Windows 7 on my computer (I'm currently using Ubuntu 11.10), and I keep getting Error Code 1005. I've tried everything, and nothing.
View 1 Replies
View Related
Jan 18, 2013
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies
View Related
Apr 29, 2012
A few weeks ago my computer turned off unexpectedly while I was using it. When I tried to start it up again, I got a black screen with a blinking cursor. I tried going into BIOS and changing the startup order to no avail. It's now back on default. I also ran the system diagnostic and it said nothing is wrong.I got a Windows 7 repair disk and attempted to use that. I ran the startup diagonosis and restarted-- again a black screen with a blinking cursor. I restored it to an earlier point and restarted-- black screen with blinking cursor. I then attempted to restore it to other points but got an error message (0x8000ffff) each time. Finally, I tried command prompt and did "bootsect /nt60 ALL" which did nothing. So I tried "bootsect /nt52 ALL" which did nothing. I did both of those again with "/force" (which I'm now guessing was a stupid move, but I was desperate to try anything) and now when I restart I get a black screen with "Invalid partition table". When I try to go to system restore now it tells me there are no restore points.
View 3 Replies
View Related
Apr 19, 2011
I have a problem with restore failed error=1117 in win 7 what do I need to do Also It's says About the NLS data is missing or corrupt
View 4 Replies
View Related
Jun 28, 2011
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
View 6 Replies
View Related
Mar 27, 2011
every 2 days i get this irritating message: "system error code 8, not enouge storage...." this happens when i try to close programs , when i try to open a program or even to open a browser. therefore, i need to restart my computer everytime and then it works fine for a day or two.....i have plenty of space in my hard disk.i tried several things ( that i read here) but it doesn't: i used registry booster program but, in vain....
View 9 Replies
View Related
Jan 4, 2012
I am trying to do a system restore on my dads computer for him but it keeps saying this: File is corrupted or unreadable 0x80070570 then I clicked run and I got another error called catastrophic failure ( 0x8000FFFF).I need help on this. It is a rental comp so not sure he has any discs for it. I have tried 5 diff ways to get it to work but nothing seems to work
View 2 Replies
View Related
Mar 21, 2012
Somehow I lost system restore all I get is a error message when I click on the icon, it says no restore points have been created to create a restore point go to system protection and when I click on that I get nothing.
View 1 Replies
View Related
Mar 13, 2011
I bought my HP Pavilion dm4 about a month ago and until recently, it had been working great and really fast while on the internet. Then lately, it started to load normal pages at half its speed, taking time to even load google. When playing MMOs like World of Warcraft, I was a lot laggier than i normally am, dropping framerates by 30-40 per second, even though my task manager said nothing else was running in the background. I thought something was wrong and my suspicions were correct after i found my WoW account to be hacked. I managed to recover my account and change the user/pass but my computer was still slow so i suspected that it was a virus.I uninstalled Norton Antivirus because it couldnt pick up on anything and got Sunbelt Vipre to try and solve the issue. Unfortunately, Vipre didn't pick up on anything either. I wanted to try to System Restore to remove any sort of keylogger or virus that was causing my computer to be so slow and hack my accounts. But when I tried to do the restore, picking the nearest restore point, it was stuck at "Initializing System Restore..." for nearly 3 hours. I had to hard reset the computer and try again at a different restore point, but I got the error message, "System Restore did not complete successfully. Your computer's systems files settings were not changed. The file or directory is corrupted and undreadable (0x80070570)." Then after clicking Run System Restore it gives me the error message "There was an unexpected error: Catastropic failure (0x8000FFFF)" I've also tried the following:-CheckDisk in safe mode, using command prompt as admin, and checkdisk at startup (this one took the longest, nearly 4 hours, and when i woke up the next morning i hadnt seen any changes)-Defrag in safe mode and normal (either way it would get stuck on 79% Analysis and then freeze), I managed to get defrag to work after a few resets and after disabling my antivirus/firewall. Still it did not make a difference and I was still unable to System Restore.-SFC using command prompt as adminPlease help as I really cannot afford to buy another computer and other than the fact that it is running at half its speed and cannot system restore, the computer is able to function normally.
View 4 Replies
View Related
Aug 2, 2010
I've noticed that I am unable to use System Restore - each time I try to restore an older point, I get the message: "System Restore did not complete successfully, Your computer's files and settings were not changed. Details; System Restore could not access a file. This is probably because an anti-virus program is running on the computer . Temporally disable your antivirus program and retry System Restore. An unspecified error occurred during System Restore, (0x80070005)" The only anti-virus program I am using is Windows Security Essentials. Previously I also had Comodo Firewall (Free version) installed, but System Restore failed to work even when I disabled or uninstalled the Firewall.Previously I was using a program called Soluto to help my laptop boot up more quickly, and when I uninstalled it, I tested System Restore and it worked. I assumed that Soluto was the reason why I could not use System Restore earlier, but apparently it is not the case, as it turns out that I am still unable to use System Restore.
For some reason, this problem happens on both my Windows 7, 64-bit machines. One is a self-assembled small form factor desktop, another is an Asus UL80VT laptop. I can only assume that perhaps one of the programs that I have installed on both machines has broken System Restore, but despite many attempts, I am still unable to figure out exactly which program seems to be the problem.
View 7 Replies
View Related
Apr 12, 2012
The last microsoft updates that were downloaded failed to run properly and I had to roll back the machine a couple of days. When I do this I always get an error at the end saying system restore failed, it may be your anti-virus dadadada.I disable the real-time protection but no matter. I still get this error but the machine does get rolled back. I don't understand why I am getting this error when things appear to be restored to an earlier date.. ???Also, anyone else have problems with the last windows update release on Tuesday?
View 8 Replies
View Related
Aug 26, 2012
I was using Photoshot CS4 and my computer shut itself off. When I laungh photoshop I get a Adobe Photoshop CS4 has stopped working. A problem caused the program to stop working correctly.
Though I should go back to a restore point. Tried several and get a System Restore error 0x80071a90.
View 1 Replies
View Related
Aug 4, 2009
Now on to the issue I have run into.
** I am currently running WIN 7 Ultimate 64 Bit RTM **
Every single time I try to use system restore, it comes back with the exact same error, on reboot:
{"System restore did not complete successfully. Your computer's system files and settings were not changed. Details:
Unspecified error occurred during System Restore. (0xc0000043)"}
I have tried different system restore points, (within Windows), but it does not seem to fix the issue. I have also tried disabling my security software, (KIS 2010), and that doesn't seem to help either.
The puzzling thing is that when I run system restore in safe mode it seems to work no problem, but it just will not work within windows itself, (normal boot).
View 5 Replies
View Related
May 22, 2011
When I try to use system restore I keep getting a message saying system restore failed to complete owing to error 0x80070020.
View 4 Replies
View Related
Mar 1, 2011
I attempted to do a system restore as my laptop (Sony Vaio VGN-NW26M) was very slow and the internet browser was not working. No scans or diagnostics showed up any problems.Halfway through the system restore the laptop crashed and restarted. I was then confronted with the error message "Bootmgr missing, press Ctrl+alt+del" I tried to boot the laptop using a recovery disc, however I get as far as the blue welcome screen and I get the error 0x4001100200001012 - the computer then restarts.I am not bothered about any of the data - I have backed it all up.
View 1 Replies
View Related
Apr 15, 2011
I am having major problems with System Restore for my HP Pavilion Windows 7 Home Premium desktop PC. Here's what happens - If I try and create a restore point I get Error 0x8004231F insufficient storage space for shadow copy. RAM is over 800 megs. There are no restore points and I cannot create any more either. I also get these errors from time to time when trying to system restore - Error 0x80073AFD and Error 0x8000FFFF Missing MUI File(s) but what MUI Files are missing or how I can find them and reinstall the damned things it does not tell me! I use Norton SS and various other security software.
One other post here suggested upgrading my Real Player which I did and although it's a nicer player and I like it better it did nothing to allow me to find my shadow copy pages or fix my restore points issue or even allow me to use system restore. I had a problem with Norton which came up with false readings under registry issues and an Error 2147212513 could not create a restore point in system restore. They did try and fix my PC and I think they screwed up system restore when they did but they of course deny it! What to do to get my system restore back up and running again and how to make it create restore points and how to do this shadow copy crap?
View 7 Replies
View Related
Dec 5, 2011
I am trying to restore a bran new install of win 7 with a sytem image created previously before a hardware failure.The machine is a lenov think centerClean install installed and the image is about 70 gig It is house on a 1tb external driveThe internal drive on the machine is 160gbI get to the restore screen it finds the image then gives me the first errorSays you must boot the machine for a recovery disk then try againOk so i stuck my usb stick in and started up it, clicked repair my computer , found the image, and started it againNow it throws the 80042407 error. Active disk in Bios is to small.How is that possible. The image is 70 gig the hard drive is 160 gb?
View 4 Replies
View Related
May 10, 2012
I am attempting to restore from a system image, but keep receiving a boot manager error message: Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible
The computer boots no problem normally, it is only when restarting to restore the system image.
View 4 Replies
View Related
Jul 15, 2012
I have tried to do a system restore to a point previously with another problem, but get the message 'Can't system restore, file or directory is corrupted and unreadable (0x80070570).'
This applies to all restore points available. I have tried System Repair, but that found nothing.
View 9 Replies
View Related
Mar 17, 2012
I got gta vice city game from my friend but it not opening.
View 2 Replies
View Related
Jan 13, 2013
I restored to a Windows Restore Point. Date was several months prior.Windows backed up what it needed for the restore on my external HD.Restored then after the computer reboot I have an error that will not allow me to do anything when windows is running."Windows Explorer has stopped working. Checking for the problem.""Restarting Windows Explorer"The icons disappear for a moment, return, then the error windows cycle through.
View 2 Replies
View Related
Jun 14, 2010
I�m running a single Windows 7 Ultimate x86 OS on my laptop and it used to work very well �till earlier today once I get back home trying to use my computer as usual to find out that it always runs the startup repair after showing the words �windows is loading files� instead of starting windows normally. Once the diagnostic & repair process is done it tells me that Startup Repair cannot repair this computer automatically. When I view the details I get the following under Root cause found:
Boot configuration is corrupted.
Repair action: Partition table repair.
Result: Failed. Error code = 0x490
After many times doing the previous repairs with no result I went to Command Prompt in order to check my system drive to find out that both �Windows� & �Program Files� directories are not existed there anymore. Instead, there�s a �Windows.old� directory that contains those 2 system directories as well as �Users� & �PerfLogs� directories plus the �autoexec.bat� & �config.sys� files. Sure there�s noway to use the system restore tool or anything else even using my Windows boot DVD. Still can�t use the cmd commands single handedly to fix this.As I said earlier I have never faced such problem before plus I have no idea how to regain my windows since I can never format my system drive as I need to backup all the files, settings, bookmarks & favorites located in my user profile first.
View 9 Replies
View Related
Jul 25, 2011
Shortcut Icons just show the >unknown< icon.I have tried to:
1. reboot in safe mode
2. move the shortut folder in and out
3. closed Explorer.exe and reopen it.
4. the last thing i've tried was to use the system restore as many say htat would help the problem. but when i want's to run system Restore it comes with the fatal error "0x80090067", so i cannot restore. WTF.
View 8 Replies
View Related
