System Protection - Catostrophic Failure (0x8000FFFF)?

Oct 17, 2012

I am trying to turn of VSS on the drive that I use as my parity drive for my flexraid configuration. However, when I click on System Protection from Control Panel I get an error that says:There was an unexpected error in the property page:Catostrophic Failure (0x8000FFFF)Please close the property page and try again.I have looked for solutions online and the most common seemed to be run scannow rom the command prompt.I did that and it said it fixed some errors. I have rebooted multiple times and still get the same error.

View 2 Replies


ADVERTISEMENT

System Restore With Error 0x8000ffff

Nov 14, 2011

I have spent several intense days trying to figure out file sharing and networking. Yesterday I deleted all documents from the Document Library. I did not think they were literally in that location. Whatever they are all gone. I wondered if I could restore and get them back. Some of them did come back after the first restore. Then I thought I should just restore to about two weeks ago and I would undo all the changes I have been making and could start over. This is what I get.

Can not find Drive C:? I opened My Computer and looked at the Properties of Drive C: for some insight. I found a tab that said Restore previous version. I get a nice list of previous versions that I can open or copy but the restore button is not enabled. I was able to open one of the versions and copy My Documents and I got all my deleted documents back. I saved them to a different drive. What I need to do to get my restore function back on line in case I need to use it later?

View 4 Replies View Related

System Will Not Restore, Error 0x8000ffff

Sep 14, 2012

My friend has a fairly new Sony computer, when he turns it on it comes up with the windows 7 logo and then after that is stuck on a black screen.

I have tried pressing f8, repair your computer then system restore however I keep getting the 0x8000ffff error. I have tried a few different restore points but still the same.

View 9 Replies View Related

Error Code 0x8000ffff In System Restore

Feb 7, 2012

Computer was running fine until I used a safe mode windows firewall sweeper in order to get rid of this nasty Trojan horse. The program ran fine and it delete just the Trojan horse "no other program or files were removed" I've tried several times to system restore but still the same error message.

Is it possible it did something to my registry and can clear CMOS work to fix it? I cannot get past the system restore screen and the bios screen can also get command prompt.

View 9 Replies View Related

"an Unspecified Error Occurred During System Restore (0x8000ffff)"?

Dec 23, 2011

"an unspecified error occurred during system restore (0x8000ffff)"I made a restore disk on my 64bit win7 desktop for my 64bit win7 laptop because windows stopped loading. Now when I try different restore points I get the same problem. Should I make a new disk? What else could I try?I have a normal stock dell desktop with windows 7 borrowed my grandmothers laptop. It is an Acer Aspire 5736Z-4790 w/ anIntel Processor. Last night after trying to install some files to make some cheat programs I use for an online game (I have loaded same programs 10x on other computers so I doubt its related to the programs themselves) One thing I did do was try to delete a winhttp.dll file in system32 or the WOW one(for 64bit computersorget the folders name)and replace it with another one(Directions for the cheats said to make sure that winhttp.dll was in sys32) and while trying to do that windows would not let me so I read somewere that there is a program that lets you "take ownership of a file" so you can override permissions. I then took ownership of sys32 and maybe the 64bit folder as well. It still did not let me replace any files in sys32 so I then restarted and when windows opened again, desktop loaded then an error message came up, then it restarted itself, and repeated, but after the second time it restarted itself windows would not load. After the Acer anufacture screen, just the blank black screen with the blinking line.

View 1 Replies View Related

System Protection Not There On System Properties?

Apr 12, 2012

Oh i can not get system restore to open but it works in safe mode not in regular mode.

View 4 Replies View Related

Missing System Protection Tab?

Aug 20, 2012

in order to restore my system . In fact when i open the system properties i realise that System Protection tab was missing. Launching the tab by its executable, SystemProtectionProperties.exe, did not launch the tab, either.

I tried to search in the registry for HKEY_LOCAL_MACHINESoftwarePoliciesMicrosoftWindows NTSystemRestoreDisableSR

I didn't find the SystemRestore Folder. I only found the Windows File Protection folder and Terminal Services folder

View 3 Replies View Related

Cannot Set System Protection On A Drive

Sep 5, 2011

I'm running Windows7 Ultimate 64-bit. I went in to the control panel/System Protection to turn on Protection on the drive that contain my documents so I could use the "Restore Previous versions". When I attempted to do so I got an error stating "Could not apply settings for the following reason: THe Filename, directory name, or valume label syntax is incorrect"

View 2 Replies View Related

System Protection Will Not Turn On?

Aug 14, 2011

I recently had a power outage while Windows 7 (x64) was loading. System booted up fine. I went to do a system restore, but could not. When I go to select a restore point is says, "System Protection is turned off". I never turned it off and it will not let me turn it on. The C: clearly shows protection is turned on, but when I select system restore it says it is turned off.

I think I read most of the posts here on this issue, but no go. What I have tried:Manually create restore point- Works fine. Repeated many times. . Turned System Protection Off and then back On- No difference Ran WMI.bet- No change Deleted all restore points- No change Ran VSS List Shadows- Got hits even though I had deleted all restore points Verified VSS is on- I have seen posts to say set to manual and set to auto. I have done both. No difference. SFC /SCANNOW- Found no integrity violations Tried to do a Repair Install- Cannot. I am running SP1. Comes back saying it cannot be done.

View 9 Replies View Related

System Protection - Turn On Or Off

Oct 24, 2009

How to Turn System Protection On or Off in Windows 7 ?

View 0 Replies View Related

Restore The System Protection Icon?

Apr 15, 2011

Recently after downloading some apps my system won't bootup properly it does go through the normal process but when it gets to the desktop and is loading it will crash and do the blue screen thing with a system dump, so I thought I would do a restore but it wouldn't allow that because there is no System Protection Icon showing in the System Window. I checked the system 32 folder and the file is there?how I can restore the System Protection Icon?

View 9 Replies View Related

System Progressive Protection - Malware?

Nov 17, 2012

I have win 7 and installed Microsoft Security Essential (MSE) with latest updates. System Progressive Protection (Malware) showed up and hijacked my computer. My windows firewall is ON.I am wondering, how does this malware come into my system and changed folders/registry. How did MSE allow to make such changes?As I googled, there are suggestion to install additional antivirus software.

View 1 Replies View Related

Turn System Protection On & Off In Windows 7

Dec 1, 2008

This tutorial will show you how to turn System Protection On and Off in Windows 7, also known as System Restore in the earlier version of Windows.

View 0 Replies View Related

You Must Enable System Protection For This Drive

Jun 4, 2009

Tried a system restore from the RC1 install disk? Mine lists about 8 restore points, but when I select one, it tells me that "You must enable System Protection for this drive." and it will not restore.. I understand that from the Brink tutorial on this topic of System Restore, that it's supposed to be on my default. There is no way I can check to see if it is on or off, because my computer will not boot. I certainly didn't turn it off, so I am wondering what is going on. It doesn't seem to make sense to create restore points if you can't use them.

View 9 Replies View Related

Turn On System Protection Using/through Ubuntu?

Sep 28, 2011

How to turn on System protection using/through Ubuntu?

View 2 Replies View Related

System Protection Not Working Properly?

Oct 9, 2011

i opened system protection today to find it hasnt been making restore points and that there was an error when i tried to set it up.My system came with Vista which I then set up to dual boot with 7, and then following that, I deleted Vista altogether. In system restore, I can see

System
Windows 7 C: (system)
Recovery
Windows 7 C: (missing)
Windows 7 C: (missing)

I think at least one of system /recovery my belong to Vista, as they dont show up in windows explorer?

View 1 Replies View Related

System Protection Error 0x81000203?

Nov 22, 2010

the system protection is not opening. im getting error 0x81000203

View 3 Replies View Related

Getting An Error Code:-5011 : 0x8000ffff

Oct 13, 2011

I am getting an error while installing batman Arkham Asylum. The details of the error and of my system are given below:

Error Code: -5011 : 0x8000ffff
Error Information:
>KernelObjectWrapper.cpp (498)
>KernelObjectWrapper.cpp (311)
>KernelIScriptWrapper.cpp (80)
>KernelObjectWrapper.cpp (197)

[code]....

View 6 Replies View Related

Enable System Protection On Local Disk (C:) With CMD

Jan 16, 2013

I Have a Netbook Windosw Home Premium 64bit (no CD Drive). After an Windows Update I can't boot anymore. By searching google I found a lot of posts with the same problem, with or without solutions that worked for these people. Unfortunately non worked for me.

how to enable System Protection vy using CMD for C: so i can do a System Restore?

View 9 Replies View Related

Turn Off System Protection By Registry (regedit)?

Sep 1, 2009

Is there any way to disable System Protection (My computer->Properties->System protection->[choose hard disk drive or partition]->Configure->check dot TURN OFF SYSTEM PROTECTION ) using regedit tool?I need this by the registry to I can put in automated process because we made about 4000 machines per day.

View 3 Replies View Related

System Protection Restore Points - Delete

Jan 5, 2009

How to Delete System Protection Restore Points in Windows 7 ?

View 0 Replies View Related

System Protection Properties Shortcut - Create

Jan 1, 2010

How to Create a Windows 7 System Protection Properties Shortcut ?

View 0 Replies View Related

System Password Protection In Order To Open Windows

Jul 24, 2011

When I bought my system, I set it up with a password required in order to be able to sign into windows. can that be bypassed by, say, a computer repair person? I sent my computer in for repair which turned out to needing a mother board replacement.I realized after that diagnosis was made that I'd forgotten to mention nor supply them with the system sign on password.

View 6 Replies View Related

Change System Protection Disk Usage In Window 7

Dec 1, 2008

This tutorial will show you how to adjust the disk usage used by System Protection, also known as System Restore in the earlier version of Windows.

View 0 Replies View Related

Delete System Protection Restore Points In Windows 7

Dec 1, 2008

This tutorial will show you how to delete the System Protection restore points in Windows 7.

View 0 Replies View Related

Remove Windows System File Protection From 2nd Disk?

Jul 3, 2011

Less than a month ago I build a new rig, installed Windows 7 on my SSD and at a later time I attached my old 1TB large disk with still had XP installed on it.Windows is protecting this drive, all folders are flagged read only and I'm unable to remove the read only flag, each time I try, and check back after processing a job to un flag it, there still there.I'm able to delete files and folders after accepting the UAC popup, however, there are several folders I want to remove but am unable to, /Boot, /Documents & Settings, /Windows and some root system files, but windows doesn't let me.(I need to run programs with elevated rights in order to be able to modify those files) The /Boot is from an older Windows 7 install and it should be safe removing it, because I installed windows 7 on a SSD with out any other disks attached, so no dual boot stuff.But worst of all, many files are also flagged read only, along with my project files that I'm now unable to modify.What buttons do I need to press to get windows to understand he should not be protecting this disk and there ain't no windows installed on it so I can clean up get rid of those read only flags on the files

View 4 Replies View Related

Says Invalid Descriptor Protection & Skipped The Operating System?

Jul 9, 2012

I have 2 hard drives from 80 GB on a secondary ide channel and the other of 300 gb on the primary channel. in these 2 hard drives are installed respectively in fat32 windows 2000 and the second hard drive windows xp, vista and other windows 2000 and so far so good ...The strange thing is that if I start windows 2000 or xp from second hard disk all right but if I start the windows vista (tried also Windows 7) happens to me that the partition of the hard disk starts saying MFT master file table and says invalid descriptor protection / sid correct ...... But I skipped the operating system

View 8 Replies View Related

System Protection - Change Disk Space Usage

Nov 13, 2008

How to Change the System Protection Disk Space Usage in Window 7 ?

View 0 Replies View Related

Invalid Partition Table - Error Message (0x8000ffff)

Apr 29, 2012

A few weeks ago my computer turned off unexpectedly while I was using it. When I tried to start it up again, I got a black screen with a blinking cursor. I tried going into BIOS and changing the startup order to no avail. It's now back on default. I also ran the system diagnostic and it said nothing is wrong.I got a Windows 7 repair disk and attempted to use that. I ran the startup diagonosis and restarted-- again a black screen with a blinking cursor. I restored it to an earlier point and restarted-- black screen with blinking cursor. I then attempted to restore it to other points but got an error message (0x8000ffff) each time. Finally, I tried command prompt and did "bootsect /nt60 ALL" which did nothing. So I tried "bootsect /nt52 ALL" which did nothing. I did both of those again with "/force" (which I'm now guessing was a stupid move, but I was desperate to try anything) and now when I restart I get a black screen with "Invalid partition table". When I try to go to system restore now it tells me there are no restore points.

View 3 Replies View Related

Activating Local Partition To The Protection System In Audit Mode

Apr 27, 2012

I have partitioned a disk into two primary partitions.

On one of them, I installed Windows 7 SP1 Ultimate 64 bit, but, during its installation, I pressed, the Ctrl+Shift+F3 sequence to go in audit mode.

Now, wanting to activate the D local partition to the protection system, I wrote: or but the D partition is still deactivated.

View 9 Replies View Related

System Restore Failure

Dec 27, 2011

It all started when I was using Revo/Uninstall to uninstall Office 2010 from my hard drive. I'm running Windows 7 Home Premium. I have installed a licensed copy of Office 2007 (Student Edition), which was working just fine. Revo identified 2 registry entries that I believed applied to 2010 that could be deleted as part of the uninstall procedure. I told it to delete the entries and then, having second thoughts, I canceled the uninstall. I saw, however, that the icon for Office 2010 had disappeared from my list of "All Programs" (although certain related Windows 2010 icons still remain.I attempted an "System Restore" only to find that the "System Restore" function for each of my hard drive partitions was set to "off." When I tried to turn them on, I got the following messsages.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved