System Protection Will Not Turn On?
Aug 14, 2011
I recently had a power outage while Windows 7 (x64) was loading. System booted up fine. I went to do a system restore, but could not. When I go to select a restore point is says, "System Protection is turned off". I never turned it off and it will not let me turn it on. The C: clearly shows protection is turned on, but when I select system restore it says it is turned off.
I think I read most of the posts here on this issue, but no go. What I have tried:Manually create restore point- Works fine. Repeated many times. . Turned System Protection Off and then back On- No difference Ran WMI.bet- No change Deleted all restore points- No change Ran VSS List Shadows- Got hits even though I had deleted all restore points Verified VSS is on- I have seen posts to say set to manual and set to auto. I have done both. No difference. SFC /SCANNOW- Found no integrity violations Tried to do a Repair Install- Cannot. I am running SP1. Comes back saying it cannot be done.
View 9 Replies
ADVERTISEMENT
Oct 24, 2009
How to Turn System Protection On or Off in Windows 7 ?
View 0 Replies
View Related
Dec 1, 2008
This tutorial will show you how to turn System Protection On and Off in Windows 7, also known as System Restore in the earlier version of Windows.
View 0 Replies
View Related
Sep 28, 2011
How to turn on System protection using/through Ubuntu?
View 2 Replies
View Related
Sep 1, 2009
Is there any way to disable System Protection (My computer->Properties->System protection->[choose hard disk drive or partition]->Configure->check dot TURN OFF SYSTEM PROTECTION ) using regedit tool?I need this by the registry to I can put in automated process because we made about 4000 machines per day.
View 3 Replies
View Related
Feb 5, 2012
Unable to play DVDs message states not possible to turn on analog copy protection on the output display.
View 1 Replies
View Related
Apr 12, 2012
Oh i can not get system restore to open but it works in safe mode not in regular mode.
View 4 Replies
View Related
Aug 20, 2012
in order to restore my system . In fact when i open the system properties i realise that System Protection tab was missing. Launching the tab by its executable, SystemProtectionProperties.exe, did not launch the tab, either.
I tried to search in the registry for HKEY_LOCAL_MACHINESoftwarePoliciesMicrosoftWindows NTSystemRestoreDisableSR
I didn't find the SystemRestore Folder. I only found the Windows File Protection folder and Terminal Services folder
View 3 Replies
View Related
Sep 5, 2011
I'm running Windows7 Ultimate 64-bit. I went in to the control panel/System Protection to turn on Protection on the drive that contain my documents so I could use the "Restore Previous versions". When I attempted to do so I got an error stating "Could not apply settings for the following reason: THe Filename, directory name, or valume label syntax is incorrect"
View 2 Replies
View Related
Apr 15, 2011
Recently after downloading some apps my system won't bootup properly it does go through the normal process but when it gets to the desktop and is loading it will crash and do the blue screen thing with a system dump, so I thought I would do a restore but it wouldn't allow that because there is no System Protection Icon showing in the System Window. I checked the system 32 folder and the file is there?how I can restore the System Protection Icon?
View 9 Replies
View Related
Nov 17, 2012
I have win 7 and installed Microsoft Security Essential (MSE) with latest updates. System Progressive Protection (Malware) showed up and hijacked my computer. My windows firewall is ON.I am wondering, how does this malware come into my system and changed folders/registry. How did MSE allow to make such changes?As I googled, there are suggestion to install additional antivirus software.
View 1 Replies
View Related
Jun 4, 2009
Tried a system restore from the RC1 install disk? Mine lists about 8 restore points, but when I select one, it tells me that "You must enable System Protection for this drive." and it will not restore.. I understand that from the Brink tutorial on this topic of System Restore, that it's supposed to be on my default. There is no way I can check to see if it is on or off, because my computer will not boot. I certainly didn't turn it off, so I am wondering what is going on. It doesn't seem to make sense to create restore points if you can't use them.
View 9 Replies
View Related
Oct 9, 2011
i opened system protection today to find it hasnt been making restore points and that there was an error when i tried to set it up.My system came with Vista which I then set up to dual boot with 7, and then following that, I deleted Vista altogether. In system restore, I can see
System
Windows 7 C: (system)
Recovery
Windows 7 C: (missing)
Windows 7 C: (missing)
I think at least one of system /recovery my belong to Vista, as they dont show up in windows explorer?
View 1 Replies
View Related
Nov 22, 2010
the system protection is not opening. im getting error 0x81000203
View 3 Replies
View Related
Oct 17, 2012
I am trying to turn of VSS on the drive that I use as my parity drive for my flexraid configuration. However, when I click on System Protection from Control Panel I get an error that says:There was an unexpected error in the property page:Catostrophic Failure (0x8000FFFF)Please close the property page and try again.I have looked for solutions online and the most common seemed to be run scannow rom the command prompt.I did that and it said it fixed some errors. I have rebooted multiple times and still get the same error.
View 2 Replies
View Related
Jan 16, 2013
I Have a Netbook Windosw Home Premium 64bit (no CD Drive). After an Windows Update I can't boot anymore. By searching google I found a lot of posts with the same problem, with or without solutions that worked for these people. Unfortunately non worked for me.
how to enable System Protection vy using CMD for C: so i can do a System Restore?
View 9 Replies
View Related
Jan 5, 2009
How to Delete System Protection Restore Points in Windows 7 ?
View 0 Replies
View Related
Jan 1, 2010
How to Create a Windows 7 System Protection Properties Shortcut ?
View 0 Replies
View Related
Jul 24, 2011
When I bought my system, I set it up with a password required in order to be able to sign into windows. can that be bypassed by, say, a computer repair person? I sent my computer in for repair which turned out to needing a mother board replacement.I realized after that diagnosis was made that I'd forgotten to mention nor supply them with the system sign on password.
View 6 Replies
View Related
Dec 1, 2008
This tutorial will show you how to adjust the disk usage used by System Protection, also known as System Restore in the earlier version of Windows.
View 0 Replies
View Related
Dec 1, 2008
This tutorial will show you how to delete the System Protection restore points in Windows 7.
View 0 Replies
View Related
Jul 3, 2011
Less than a month ago I build a new rig, installed Windows 7 on my SSD and at a later time I attached my old 1TB large disk with still had XP installed on it.Windows is protecting this drive, all folders are flagged read only and I'm unable to remove the read only flag, each time I try, and check back after processing a job to un flag it, there still there.I'm able to delete files and folders after accepting the UAC popup, however, there are several folders I want to remove but am unable to, /Boot, /Documents & Settings, /Windows and some root system files, but windows doesn't let me.(I need to run programs with elevated rights in order to be able to modify those files) The /Boot is from an older Windows 7 install and it should be safe removing it, because I installed windows 7 on a SSD with out any other disks attached, so no dual boot stuff.But worst of all, many files are also flagged read only, along with my project files that I'm now unable to modify.What buttons do I need to press to get windows to understand he should not be protecting this disk and there ain't no windows installed on it so I can clean up get rid of those read only flags on the files
View 4 Replies
View Related
Jul 9, 2012
I have 2 hard drives from 80 GB on a secondary ide channel and the other of 300 gb on the primary channel. in these 2 hard drives are installed respectively in fat32 windows 2000 and the second hard drive windows xp, vista and other windows 2000 and so far so good ...The strange thing is that if I start windows 2000 or xp from second hard disk all right but if I start the windows vista (tried also Windows 7) happens to me that the partition of the hard disk starts saying MFT master file table and says invalid descriptor protection / sid correct ...... But I skipped the operating system
View 8 Replies
View Related
Nov 13, 2008
How to Change the System Protection Disk Space Usage in Window 7 ?
View 0 Replies
View Related
Apr 27, 2012
I have partitioned a disk into two primary partitions.
On one of them, I installed Windows 7 SP1 Ultimate 64 bit, but, during its installation, I pressed, the Ctrl+Shift+F3 sequence to go in audit mode.
Now, wanting to activate the D local partition to the protection system, I wrote: or but the D partition is still deactivated.
View 9 Replies
View Related
Dec 23, 2012
Windows Anytime Upgrade couldn't create a restore point?
View 9 Replies
View Related
Sep 11, 2010
am not able to remove my write protected from pendrive i have tried all the option which is mention variouw website such that regidit give solution
View 3 Replies
View Related
Jun 12, 2011
im currently in safe mode as im having issues with my win 7 , i would like to restore my system but system restore is turned off i read that to turn it on i have to press a 'sytem protection ' when i right click computer then properties but theres no 'system protection' link there . c814281ca8a21b7d81eeab9570ab0868.png
View 2 Replies
View Related
Feb 25, 2012
Today i tried to use Windows Anytime Upgrade but after checkingmy code it said that i need to turn on system recoveryi go to:computer>properties>system protectionand then i get an error saying run system recovery again (0X81000203)then were it says available disks it says searching forever...this is really annoying not only because i cant use Anytime Upgradebut also because system recovery is very good if my systemhas tons of crashes and other problems
View 4 Replies
View Related
Jun 29, 2011
How to Turn System Icons On or Off in Windows 7 ?
View 0 Replies
View Related
Jun 14, 2011
I looked in System Configuration on my W7 Ultimate.....There are 80 systems running. Which ones can I shut off to make my pc run faster with W7 and not mess it up. This is just after I rebooted I didn't have anything open yet. [code]
View 6 Replies
View Related