every 2 days i get this irritating message: "system error code 8, not enouge storage...." this happens when i try to close programs , when i try to open a program or even to open a browser. therefore, i need to restart my computer everytime and then it works fine for a day or two.....i have plenty of space in my hard disk.i tried several things ( that i read here) but it doesn't: i used registry booster program but, in vain....
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+ 2 Hitachi HDT725032VLA SCSI 320 gb hard drives Nvidia Geforce 8800 GS Graphics Card 3gb of system memory
Computer was running fine until I used a safe mode windows firewall sweeper in order to get rid of this nasty Trojan horse. The program ran fine and it delete just the Trojan horse "no other program or files were removed" I've tried several times to system restore but still the same error message.
Is it possible it did something to my registry and can clear CMOS work to fix it? I cannot get past the system restore screen and the bios screen can also get command prompt.
I am trying to rectify the error with windows update. Everytime I try to update it tells me it is checking for updates...Then "To check for updates, you must first install an update for Windows Update. Your automatic Updating settings will not change." I click Install now and get "Window could not search for new updates"An error occured while checking for new updates for your computer. Error(s) Found Code 80070643 Windows Update encountered an unknown error.
This problem first came to light a year ago when I downloaded a windows update that was corrupt.It forced the computer to loop the autocheck upon boot and could only be started in safe mode or by canelling the check.After looking through the forums I found an interim fix which disabled the autocheck and since have always recieved the message upon restarting "Autocheck program not found".I naturally thought this issue would be resovled in the next update and or a future fix.I had to go away for work at the start of this year and when I got back and windows updated it still had the autocheck message.Recently I have been unable to update at all due to the aforementioned error. The simplest soultion it would seem would be to do a system restore, this I have tried however every possible point seems to have a corrupt file on it.I ran a scan using Malwarebytes and found nothing.I don't want to format as the programs came pre installed and that would mean taking to back to the shop.
I�m running a single Windows 7 Ultimate x86 OS on my laptop and it used to work very well �till earlier today once I get back home trying to use my computer as usual to find out that it always runs the startup repair after showing the words �windows is loading files� instead of starting windows normally. Once the diagnostic & repair process is done it tells me that Startup Repair cannot repair this computer automatically. When I view the details I get the following under Root cause found:
After many times doing the previous repairs with no result I went to Command Prompt in order to check my system drive to find out that both �Windows� & �Program Files� directories are not existed there anymore. Instead, there�s a �Windows.old� directory that contains those 2 system directories as well as �Users� & �PerfLogs� directories plus the �autoexec.bat� & �config.sys� files. Sure there�s noway to use the system restore tool or anything else even using my Windows boot DVD. Still can�t use the cmd commands single handedly to fix this.As I said earlier I have never faced such problem before plus I have no idea how to regain my windows since I can never format my system drive as I need to backup all the files, settings, bookmarks & favorites located in my user profile first.
In the last few months I have been getting error messages in my Yahoo mail account. It will not go to next email and returns an 'Error Code 5' or recently an 'Error Code 15'. It says "Sorry for the inconvenience. You have stumbled upon an unexpected, temporary problem." This happens every other email. What are these codes and why is this happening?
i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
I am using Windows 7 32-bit Premium. I'm trying to run a Batch file with several dll's, and I'm getting this error:Banner: Error Occurred - Add LicenseBody: Unable to enumerate resources. Error Code: 15106I have tried to google this, but I haven'tAlso, if I even try to register any of the Batch's DLLs manually, I get this error:Banner: RegSvr32body: The Module "C:Bla Bla Bla...." was loaded but the call to "INSERT DLL HERE" failed with error code 0x80028011c.For more information about this problem, search online using the error code as a search term.
i downloaded a disk image iso file for one of my programs. i mounted and ran the image. the setup.exe file runs fine but when i make any selction i get a "error calling shell execute. error code: 5" message and the program terminates.i tried it on a xp machine and also burned a cd but am still getting the error message
I am having great difficulty downloading and installing AVG 2012. Keeps on saying goodbye before installing and i am getting message that says MSI engine failed to install. Can't download. have tried 2 system restore points but still same.
I have changed my graphic card (MSI N560GTX-TI) and new PSU (Corsair GS 700) and now my PC does NOT start, it gives me an error message: "error code biohd-2 warning no drives detected".Checked the cables, SATA ports, hardware diagnose, reset CMOS, removed the motherboard battery and nothing...My HD is a WD Caviar Green 2TB.
I having a popular problem 643 and I have tryied several sugestions but the problem still exist.The first of many updates that fail was on 6-10-2012 Framework4 KB2656351 plus 8 or 9 more with different numbers.I got this information by clicking on display updates, I do not know if that is the right way to get the code name for the updates or if there is other way. If there is other way to get this information please let me know, I am a work in progress.
I recently installed windows 7 and I did not have this problem on XP....
i tried to download the latest realtek driver but all I have is a code 10 error....I tried to update the driver and reinstall it...and nothing works can anyone please help me?
New to this site although I have used it in the past, I have a frustrating problem I can't figure out,Did a new build(my first) for my wife ,Keep getting these error codes when she plays a slot game on facebook, Game will run for about 2-3 minutes then freezes sometimes have to hard boot ot I get the ie error I listed below.
Windows 7 will not create a backup and restore point. I have a external HD with 163 GB free and the error code says that I do not have enough space to create a system image. The moderators at Windows Answers have nothing but suggestions, no cures. Obviously MS is aware of this problem yet they have not put out a patch or update to repair this problem, any suggestions for a not-tech?
Was in the process of backing-up my computer and received the error code that back-up stopped. Details showed error code 0x80070570 was the reason.I did a Google search and came-up with this forum site and I saw a post re the error code but it was referencing it during an install. I was not trying to install anything (even though I have not been able to reinstall Roxio Creator sinceDec) and was wondering if the link (to Uniblue registry software)
I have laptop Toshiba Satellite L775-109 with OS Win7-64bit and when I try to fill the Windows credentials ( control panel>credential manager) I receive refusal in the form of error code 0x80070057 and explanation that the parameter is incorrect?
Windows has stopped this device because it has reported problems. (Code 43)when i try to connect my TrekStore USB EXTERNAL HARD DRIVE IT JUST START DOING THIS A WEEK AGO BEFORE THAT WAS WORKING
On another post in this forum there is a solution for error code 8x80041004. The person asking for thg to do with their system errors, but mine is with Internet games. None of my games work and there are many solutions out there which also don't seem to work. So, I am hoping someone has had this problem and has fixed
I installed a new hard drive two months ago due to the fact I've been having minor problems with this refurbished pc. No problem. I installed updates, Microsoft Security Essentials and Windows Defender, or so I thought. When trying to use any of them as well as system restore, and error code pops up stating Microsoft Security Client , An error has occured in the program during initialization. If this problem continues, contact your system administrator. Is my pc possessed?
I was having some issues with my pc a few weeks back. Nobody could find a fix for my problem so I took the 11 hr route and restored it back to factory settings. Everything is good except I've got a yellow exclamation point over two devices under Devices & Printers. It's bugging me and even though my initial problem is fixed, I'd like everything tip top after I just put in all this work setting it back up. The error message located in properties is Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19). One is for my printer and I assume the other is for my modem?
A while ago I had some bluescreens with the error-code F4 which I could fix by updating the SSD firmware (from 1.3.0 to 1.3.3). But since then, I sometimes have a bluescreen with the errorcode 101. The bluescreens only appear while I'm playing Battlefield 3 or sometimes when I currently play nothing; in other situations my pc just freezes and I have to use the power button. With Google I found out, that this bluescreen is caused by an error with the processor, so I ran Prime95 and watched the temperatures with SpeedFan. The temperature of the second core was 98�C so I started logging the temperature. After another bluescreen I looked in the logfile but the temperature was only around 40�C. So it seems that nothing overheats (which is also proved by the fact that the bluescreens appears while nothing runs that stresses the hardware alot).
After installing the new drivers from Nvidia (195.62, 197.16 and then 258.19) I still have the drivers for this device and are not installed (code 28) error. I have tried to uninstall the driver and re-boot the machine and windows finds the hardware and I get the same error. When I updated the driver, I download the driver file, go into the extracted directory and run the setup.exe file. Then I go to the device manager and update the driver for this device and specify the directory for it to search on my hard drive. I have a GeForce 8400M GS video card and am running Windows 7 Ultimate 64-bit. My laptop is an HP dv9500z (Product GP347AV). I am running an AMD Turion 64 X2 2.2 GHz processor.
certain boxes wouldent show up in steam skype or McAfee and i did some digging and every time i would run this in the run program i would get this the module "jscrpt.dll" was loaded but the call to DLLRegisterServer failed with error code 0x80004005 help i cant use skype steam or McAfee i have win 7 64 bit
I've had trouble with my machine starting. I've done all the advice the 7 Forum suggests, running start up 3 times...etc and it will work for a day or two, then not start. Then if I hit the reset button a couple of times, it will go into the start up repair and I end up with this message: Repair Action/ System files Integrity check and repair Result Failed / Error code = 0x490 Time Taken / 700863 ms I've run sfc from an elevated window and it says everything is fine.
I encountered this error all of a sudden when I watching a video in VLC the screen flickered and the system froze. I restarted it and Windows Aero was disabled and videos lag I've installed the latest drivers from Nvidia too. I removed the old drivers using Driver Sweeper and in Device Manager there's an exclamation mark next 8800GT saying its a code 43 error. I've tried practically everything is there anything I can do now?