After installing the new drivers from Nvidia (195.62, 197.16 and then 258.19) I still have the drivers for this device and are not installed (code 28) error. I have tried to uninstall the driver and re-boot the machine and windows finds the hardware and I get the same error. When I updated the driver, I download the driver file, go into the extracted directory and run the setup.exe file. Then I go to the device manager and update the driver for this device and specify the directory for it to search on my hard drive. I have a GeForce 8400M GS video card and am running Windows 7 Ultimate 64-bit. My laptop is an HP dv9500z (Product GP347AV). I am running an AMD Turion 64 X2 2.2 GHz processor.
I have recently installed Windows 7 to my HP dv2718us and am missing drivers.For all listed below I get "The drivers for this device are not installed. (Code 28)"
Base System Device Location: PCI bus 1, device 9, function 2
Base System Device Location: PCI bus 1, device 9, function 3
Coprocessor Location: PCI bus 0, device 1, function 3
Running updates for drivers have been unsuccessful. It seems important.
In the last few months I have been getting error messages in my Yahoo mail account. It will not go to next email and returns an 'Error Code 5' or recently an 'Error Code 15'. It says "Sorry for the inconvenience. You have stumbled upon an unexpected, temporary problem." This happens every other email. What are these codes and why is this happening?
i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+ 2 Hitachi HDT725032VLA SCSI 320 gb hard drives Nvidia Geforce 8800 GS Graphics Card 3gb of system memory
I am using Windows 7 32-bit Premium. I'm trying to run a Batch file with several dll's, and I'm getting this error:Banner: Error Occurred - Add LicenseBody: Unable to enumerate resources. Error Code: 15106I have tried to google this, but I haven'tAlso, if I even try to register any of the Batch's DLLs manually, I get this error:Banner: RegSvr32body: The Module "C:Bla Bla Bla...." was loaded but the call to "INSERT DLL HERE" failed with error code 0x80028011c.For more information about this problem, search online using the error code as a search term.
i downloaded a disk image iso file for one of my programs. i mounted and ran the image. the setup.exe file runs fine but when i make any selction i get a "error calling shell execute. error code: 5" message and the program terminates.i tried it on a xp machine and also burned a cd but am still getting the error message
I am having great difficulty downloading and installing AVG 2012. Keeps on saying goodbye before installing and i am getting message that says MSI engine failed to install. Can't download. have tried 2 system restore points but still same.
I have changed my graphic card (MSI N560GTX-TI) and new PSU (Corsair GS 700) and now my PC does NOT start, it gives me an error message: "error code biohd-2 warning no drives detected".Checked the cables, SATA ports, hardware diagnose, reset CMOS, removed the motherboard battery and nothing...My HD is a WD Caviar Green 2TB.
After a bit of searching, I was unable to find any answer for me.I just noticed today that I'm missing a coprocessor driver of some sort with my PC.I'm unsure what this does but I'm missing
im looking for a coprocessor driver for xfx a72p- 7509 motherboard or xfx 740a-sli to run on windows 7 64bit, id tried getting an update driver from nvidia, but didn't work and also allow win 7 to search automatically but still nothing.
I having a popular problem 643 and I have tryied several sugestions but the problem still exist.The first of many updates that fail was on 6-10-2012 Framework4 KB2656351 plus 8 or 9 more with different numbers.I got this information by clicking on display updates, I do not know if that is the right way to get the code name for the updates or if there is other way. If there is other way to get this information please let me know, I am a work in progress.
I recently installed windows 7 and I did not have this problem on XP....
i tried to download the latest realtek driver but all I have is a code 10 error....I tried to update the driver and reinstall it...and nothing works can anyone please help me?
New to this site although I have used it in the past, I have a frustrating problem I can't figure out,Did a new build(my first) for my wife ,Keep getting these error codes when she plays a slot game on facebook, Game will run for about 2-3 minutes then freezes sometimes have to hard boot ot I get the ie error I listed below.
I installed Windows 7 Beta Build 7000 (from official windows site, but i got a windows key from a friend of mine ^^) a couple of months ago, its all working fine.I recently installed the Windows 7 drivers available at Nvidia.com for my Nvidia 9500GT and got a noticable FPS boost.Today when I was just browsing some stuff i noticed that I had 2 driver errors:
USB Camera <-- old thing, bought it years ago, so screw that xD Coprocessor <-- No further information given O.o
so I tried to use the troubleshoot thing by rightclicking on my computer (with the yellow sign next to it ) and clicked Troubleshoot. It tried to reinstall the coprocessors drivers, but couldn't find earlier drivers so it failed.so now is my question: What the hell is my coprocessor? Could it be the onboard Nvidia geforce 7050? I personally doubt it becouse when installing Windows 7 it showed it had downloaded the WMD drivers from windows update for the 7050 and the 9500...
I have an AMD Phenom II X3 710 2,5 GhZ, and after fiddling around some in the device manager I notice that the "coprocessor" is unknown, and I can't find drivers for it.I've an nVidia 8200 chipset with plans on changing to AMD 890GX/SB850.As a sidenote I'd actually also like to hear the experience of you wise fellows if any has tried changing motherboard without reinstalling windows.
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
To find a driver for this device, click Update Driver.
The above is found in my Device Manager under "Other Devices" "coprocessors" . I have already tried to install drivers for my sound card (Win 7 drivers are available)but when I do , Im told they dont need to be updated, I have the latest edition. I assumed the coprocessor was my sound card because I dont have any sound. Im tempted to do a system restore ! My m/b is a MSI K9N2 Diamond.
I have an HP DV6500 with an AMD TL-64 processor and the NVidea GeForce 8400M GS graphics card. It's the rs085av model.
I recently installed Windows 7 Pro 32 bit, and I managed to install all the drivers except for two items. It shows "Coprocessor" and "Unknown Device" as incorrectly installed. I don't know what the Unknown device is, but it might be my cd drive (slimtype DVD A DS8A1P ATA), which also isn't working. Also not working is my Ethernet port, which is on the motherboard.
So, if anyone knows what drivers I need to grab to get those to work, or if I need to reinstall the chipset, I would love to know.
I have an AMD athlon 64 x2 dual-core TK-53 processor but i can't find an driver for the coprocessor not even on the offical site. Windows say's in the device manager that it isn't working properly because there are no drivers installed.
I am getting this message... The drivers for this device are not installed. (Code 28)
This is resulting in my laptop in crashing regularly and windows tries to recover the display driver.
I have a HP dv6525 with 7150M / nForce 630m - driver version 7.15.11.7948.
Windows 7 will not create a backup and restore point. I have a external HD with 163 GB free and the error code says that I do not have enough space to create a system image. The moderators at Windows Answers have nothing but suggestions, no cures. Obviously MS is aware of this problem yet they have not put out a patch or update to repair this problem, any suggestions for a not-tech?
Was in the process of backing-up my computer and received the error code that back-up stopped. Details showed error code 0x80070570 was the reason.I did a Google search and came-up with this forum site and I saw a post re the error code but it was referencing it during an install. I was not trying to install anything (even though I have not been able to reinstall Roxio Creator sinceDec) and was wondering if the link (to Uniblue registry software)
I have laptop Toshiba Satellite L775-109 with OS Win7-64bit and when I try to fill the Windows credentials ( control panel>credential manager) I receive refusal in the form of error code 0x80070057 and explanation that the parameter is incorrect?
Windows has stopped this device because it has reported problems. (Code 43)when i try to connect my TrekStore USB EXTERNAL HARD DRIVE IT JUST START DOING THIS A WEEK AGO BEFORE THAT WAS WORKING
On another post in this forum there is a solution for error code 8x80041004. The person asking for thg to do with their system errors, but mine is with Internet games. None of my games work and there are many solutions out there which also don't seem to work. So, I am hoping someone has had this problem and has fixed
I installed a new hard drive two months ago due to the fact I've been having minor problems with this refurbished pc. No problem. I installed updates, Microsoft Security Essentials and Windows Defender, or so I thought. When trying to use any of them as well as system restore, and error code pops up stating Microsoft Security Client , An error has occured in the program during initialization. If this problem continues, contact your system administrator. Is my pc possessed?
every 2 days i get this irritating message: "system error code 8, not enouge storage...." this happens when i try to close programs , when i try to open a program or even to open a browser. therefore, i need to restart my computer everytime and then it works fine for a day or two.....i have plenty of space in my hard disk.i tried several things ( that i read here) but it doesn't: i used registry booster program but, in vain....
