Check Disk Is Not Adding Default Settings
Jan 31, 2012
I have a Toshiba laptop with W7 upgraded to SP1.I noticed that it adds autocheck autochk /r ??C: to the default autocheck autochk * in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession Manager in regedit.Even if I modify it manually to autocheck autochk * it still adds autocheck autochk /r ??C,I don't think this is an administrator issue as my other laptop with W7 SP1 (SP1 included) does not have this problem.
View 9 Replies
ADVERTISEMENT
Feb 4, 2013
I have an WD external hard disc,its showing data error (cyclic redundancy check) and its also showing to format the disc.
View 4 Replies
View Related
Sep 23, 2012
Now, just 3 days ago It started the BSOD issue.I realize that my GPU was the cause of this issue. When playing games or open 3d applications the temp goes 30C to 72C (In 15 seconds) then 82C - 85C constant (in about 30 seconds).Now I've been using MSI afterburner to check my temps and at fulload my GPU will be at 62-72C max temperature but now it's 10C even higher then before. No, I haven't fiddled with the voltage I set the GPU voltage to 1.037v which is the safest (been running this almost 8 months!). The GPU is the GTX 560ti.Is there a way to set the GPU on default settings or reset GPU settings in cmd or other professional way. I have uninstalled the drivers, uninstalling GPU, disabled GPU, disabled PCI-E slot and so on by using device manager and the issue still persist. Yes, I also have clean the GPU perfectly and still the temperature goes up to 82 seconds at 30seconds-45seconds. Yes, I have checked everything is set correctly and so on, I am a PC Tech.
Is the GPU damaged? Yes I have looked at this thread: Stop 0x124 - what it means and what to try Mainly, I know its the GPU straight away, I tried checking old drivers, new drivers, another GPU overclocked software such as GPU tweak and EVGA Precision. I am thinking it's the GPU is damaged or the PCI-E is damaged (I have another PCI-E slot on my system and the issue still there). It might be the PCI-E frequency? but it's set to 100 which it meant to be, I just hope is software related because I don't have the money to buy a new card. Did the dump files help?
View 4 Replies
View Related
Dec 23, 2012
I run Windows 7-64 and need to install XP. I made a space, and booted from the XP CD. After it loaded files, when starting, it crashed. I read on a forum I need to set the drive to compatibility mode (called legacy in my setup). It warns my OS may not boot.What should I do? I'm afraid to change the drive setting and have Windows 7 not boot. But I need to get XP working. I do have two drives. Second is a backup, I could install XP on that, and set the second drive to legacy, and leave my primary drive's current settings.
View 8 Replies
View Related
Jun 14, 2012
I just completed adding several files to my newly defragmented disk, nothing else. But when I looked where things were placed, I saw that the disk was fragmented again. Why does this happen?
View 1 Replies
View Related
Jun 6, 2012
I just installed a second hard disk on my MSI GT780 machine with 8GB of RAM, both drives are detected working perfectly. The old hdd, a generic 5400 rpm, is mainly for storage and the new one, 7200 rpm is where I installed my OS. Both are 500GB in capacity.The only thing I noticed is that I'm getting some lags, CPU usage would spike up to 90-100%, RAM never goes over 50% while gaming (Batman Arkham City and Battlefield 2). This never happened before I added the 2nd hdd and before then, I can have 2 games in the background (GTA4 & Battlefield 3) while browsing and music steaming with no problems at all. I updated the motherboard and VGA drivers after a fresh install on the new hdd.I'm using a 64bit Windows 7 Ultimate using the same installer I had for the old hd.
View 8 Replies
View Related
Jul 2, 2012
After running on the main hard drive, is there a log that saves?
View 1 Replies
View Related
Apr 17, 2011
So I try to schedule Disk Check on my C: drive by going to Computer-> Right Click on C: -> go to properties -> Tools -> Error Checking -> Check now ->select both Disk options (1. Automatically Fix file system errors 2. Scan for and attempt recovery of bad sectors). Of course, it tells me that the disk is in use and asks me if I would like to check for disk errors the next time I start my computer. I click yes
View 9 Replies
View Related
Jun 4, 2009
How to Run Check Disk in Windows 7 ?
View 0 Replies
View Related
Jan 16, 2013
I ran a disk check today. It seemed to go as normal, but when it finished my windows 7 pc didn't start. I restarted it, and same happened again - checkdisk had apparently been scheduled, ran, and - nothing. Tried restarting several times, but always the same.Hitting any key didn't stop checkdisk. PC won't start in safe mode. Recovery disk doesn't work. Can't get pc started at all.
View 5 Replies
View Related
Jun 19, 2011
My computer rebooted while I slept, so I went and checked the Windows Logs for my System. Found out it was KERNEL-Power but that appears to have also taken our router and my brother's computer so I can safely assume something went wonky with the power.However, I did notice a pair of errors, both occurring a little while before the reboot, for bad blocks on my harddisk. Obviously, I decided to do a disk check.I tried to run the first one on my primary partition, C, and for that had to reboot since it holds Windows. The check ran fine for a few moments, but got stuck on a certain point when processing index (Step 2). Rebooting so it would try again got to the exact same point and was stuck.Currently running on the other partition of my main harddisk. So far so good, but I'll update if that one gets stuck as well.
View 3 Replies
View Related
Feb 21, 2012
can i check everything when i run Disk Cleanup?
View 1 Replies
View Related
May 17, 2012
I just got a new MSI laptop a few days ago. I don't plug in my battery so I can reserve it for when I need it. 1 time I accidentaly unplug the power cord.. When I go to try to perform a disk check checking Automatically fix file system errors and Scan for and attempt recovery of bad sectors.. I reboot my laptop unplugged every usb attached and when it gets to the check menu it automatically cancel it.. what is happening.. I'm not pushing any keys or anything.
View 1 Replies
View Related
Sep 16, 2009
How can I solve the disk check at boost? I have used seagatetool to check disk but the result is PASS, the hard drive had no problem. I have format the disk and reinstalled Windows 7 but disk check still run.
View 6 Replies
View Related
Jul 11, 2010
How to Reset Check Disk to Not Run at Startup ?
View 0 Replies
View Related
Dec 25, 2010
My computer will not get past the file checking screen where it stops the countdown at 1 and does nothing. No matter what I press it won't boot up, it always freezes and does nothing. I went into startup options, and did every diagnostic test there, all came up 100% Ok, that took over 6 hours. And I still can't get past the screen. I have close to 1000 episodes of tv on there, I really don't want to lose everything...
View 3 Replies
View Related
Jun 21, 2011
My PC has decided to do a check disk every time it boots up, what is causing it.
View 5 Replies
View Related
Apr 18, 2011
I have been having some weird problems on my laptop. I first did a memtest using memtest86 4.0 and that came up clean. I am now doing a disk check and it was progressing fine till now. the screen says stage 5 of 5 97% (82135612 of 84678825 free clusters processed) for over and hour and the HDD light is no longer on. any advice as to what I should do? I have heard that forcing the system to reboot during a disk check can ruin your system so I don't want to do that.
View 7 Replies
View Related
Sep 24, 2011
'm having problem with windows 7. oftenly the DISK CHECKS appear before startup. i've reformatted my computer 3 times but this disk check problem is still there.
View 9 Replies
View Related
Jun 20, 2012
I bought another pc today to replace my current work pc, now here is what it does since i pulled it out the box I have a ASUS CM687 it runs checkdsk every restart on D, which i think is where the recovery is at for the PC, now it trys to do it and says it was unsuccessful, thing is brand new out the box i am trying to understand why is it doing that and then saying there has been a problem trying to scan it then boots right into windows?
View 1 Replies
View Related
Jun 25, 2012
Though it was likely foolish of me to keep putting it off I can no longer run a disk check. The 10 second timer stops itself at 10 and proceeds to the log in screen. Not sure if it's important but my "l" key is broken and I was told that that key being broken may be counting as the "press any key to skip dick check". If that is the issue is there any way around it? And if that isn't it then why won't my disk check continue?
View 3 Replies
View Related
Jul 15, 2012
How long does a full disk check take? Just curious so I can plan my time.
View 9 Replies
View Related
Jan 24, 2013
I've used the Win 7 built in Disk Defragmenter since day one. Noticed about two months ago that it is not checking C:. It checks the other included drives (an external HDD and a Recovery drive) on schedule. I have tried unchecking and rechecking and changing scheduled times all to no avail. As a workaround I manually analyze the drive...when I remember.
View 5 Replies
View Related
Jul 16, 2011
At the time of updating avg 2011 free version my pc is giving chkdsk error i have tried to uninstall but i could not do it.
View 1 Replies
View Related
Feb 5, 2012
I have a drive that is a 15 GB partition on a 80 GB disk. It is an old disk, so could be failing, but action is strange. Other partitions on the drive succsessfully completed the checking disk procedure, but the 15 GB partition is taking an enourmous amount of time for each file after a swift run of the first 300 files. After that, I'm estimating it takes 10 minutes per file and has been running since 11AM yesterday. It is now near 8AM and it is still only at file 781. Is it possible for a failing disk to manifest itself in one partition before the others? Or is there some other possibility that I should examine.
View 4 Replies
View Related
Dec 5, 2010
[code] i was reading something online that everything under services should be normal because of the default settings and wasnt supposed to be ignored. I wanted to find out how they were put on ignore and if you could give me instructions on how to get the default settings on those services again. I already tried sc.exe and run it on administrator but everytime i type something on cmd prompt it closes.
View 1 Replies
View Related
May 11, 2011
I used to have that annoying check for disk consistency thing when you boot up so I just let it go and afterwards now programs like Itunes Rhapsody and some other programs just wont open. I click on them and the mouse pointer goes into loading icon like its about to open but then nothing opens.
View 2 Replies
View Related
Dec 13, 2011
Anyways, every time I try to schedule a "Check Disk" it NEVER starts on a restart. I already did the "sfc /scannow" command on the cmd prompt. In fact it said it was UNABLE to fix some problems. I have attached a file of my "SFC scan log". Inside it says it was unable to fix "Chkdsk.exe" Go figure. Alright, just some extra information. I also think my computer is confused of itself . I mean, it seems to not know if its a 64 bit or a 86 bit! I was told to install a hotfix for "Chkdsk.exe" here [URL]. But it did NOT work. I attempted to install both 64 bit AND 86 bit hotfixes, and yes they were both windows 7 (Chkdsk.exe) hotfixes.
My system specs:
- Toshiba Qosmio X505 Laptop-
Windows 7 64bit (Yes it says 64 bit but I've tried to install other kinds of hotfixes for both 64 and 86 bits and none of them worked!)
Intel Core i5
4gb Ram
Nvidia Geforce GTS 360M
View 14 Replies
View Related
Sep 20, 2011
So i recently added ram to my computer, this is DDR2 RAM, so i took out 2 old sticks that were 1 gig each and put in two 2 gig sticks. Therefore all 4 of my slots are full and i have 6Gigs in total. When i tried to start up my computer i pressed F1 to save the new memory amount (This amount was indeed correct), and my computer rebooted but then stopped at a disk check. I allowed it to run the disk check for about 10-15 seconds. In this short amount of time it was displaying a bunch of corrupted files and attempting to resolve them i am guessing, but suddenly my computer restarted around 5 times in a row in 5-10 second intervals then i got the error saying: 2233 - HECI error during MEBX execution. ME BIOS Extension Module halted. Update BIOS or ME Firmware if problem persists.I have only found onereference of this on uring-MEBX-execution/td-p/4490533 which seems like it was a faulty motherboard. What i did was i took out the new sticks of RAM and put in the old sticks of RAM and tried my computer again. This time I got all the way to the disk check again and this time i skipped it. Windows started up fine but with some other issues. When i started Google Chrome, it said that my internet explorer.lnk file was corrupted. Also if i tried to reinstall internet explorer, it would fail installation near the end. (by fail i mean i would get a window saying Internet Explorer could not fully install). Next i tried Microsoft excel, and it failed saying i did not have enough memory even though my computer stated i had 6 gigs but 5.7 something usable RAM. I tried word and it instantly "Stopped Working" as windows put it. So i uninstalled microsoft office to try an reinstall it but I rebooted my computer after I uninstalled it.
View 7 Replies
View Related
Dec 6, 2012
A couple of weeks ago i started receiving an error on startup saying that Disk C: needed to be checked for constancy, Type of file is NTSF, Cannot open Volume for Direct Access due to a recent software package installation, please use system restore to a point prior to the software installation. There is not a restore point available to access as far back as i need to go. What do i need to do fix this problem??? Plus is there any way to figure out what program is causing this issue, so i can uninstall it??
View 14 Replies
View Related
Oct 29, 2012
I wanted to do the checkdisk action for my computer, it fails, and saying I have to use system restore to get rid of a recent software package installation.
View 3 Replies
View Related