I used to have that annoying check for disk consistency thing when you boot up so I just let it go and afterwards now programs like Itunes Rhapsody and some other programs just wont open. I click on them and the mouse pointer goes into loading icon like its about to open but then nothing opens.
View 2 RepliesMy computer will not get past the file checking screen where it stops the countdown at 1 and does nothing. No matter what I press it won't boot up, it always freezes and does nothing. I went into startup options, and did every diagnostic test there, all came up 100% Ok, that took over 6 hours. And I still can't get past the screen. I have close to 1000 episodes of tv on there, I really don't want to lose everything...
View 3 Replies View RelatedI run a windows 7 7600 build, which is not genuine. About two weeks ago, nearly every time I booted my computer, iId get "one of your disks needs to be checked for consistency" message, while windows would carry on with the said process, isolating, replacing and deleting all files necessary. I run a full scan, with my avg, found no virus, did some more scans, and the said process has stopped occuring. However, since this has stopped, my computer has been consistently and very much frequently been freezing processes and applications for a period of 2-20 seconds.
Games would freeze on their tracks (especially frustrating on the online short) photoshop brushes would stop rendering, movies would stop their videos (oddly sometimes the sound carries on), internet explorers would stop loading etc. etc. I've defragmented my 0% fragmented drives, just in case, yet the problem persists. I saw somewhere that windows might be pulling this trick, so i'd get the genuine ones. but i can't imagine that's the case, because windows have detected my version as not genuine for a couple of months now, (run as genuine for about half a year before).
I have an WD external hard disc,its showing data error (cyclic redundancy check) and its also showing to format the disc.
View 4 Replies View RelatedMy hp dv3t has been giving a message about checking a disk for consistency every time I reboot(ed) for about a week now, but today it froze after the countdown reaches zero (for bypassing the procedure)�nothing I do can get it past this step. What do I do? I tried booting from Safe Mode, it listed a bunch of drivers but then froze.I'm using W7 64-bit Home Premium.
View 3 Replies View RelatedI would like to know if there is a way I can test if a specific port is open on an IP address and if my PC can connect to that port? How do you do this from Command Prompt? 'telnet iport' does not seem to work since it just says 'telnet' is not recognized as an internal or external command.
I do not want to use a website to do this, since they will test if they can make a connection from their servers to the ip port in question, not if the port between my IP address and the ip in question is open.
I know about NMAP and Netcat, but don't know how that works.
After running on the main hard drive, is there a log that saves?
View 1 Replies View RelatedSo I try to schedule Disk Check on my C: drive by going to Computer-> Right Click on C: -> go to properties -> Tools -> Error Checking -> Check now ->select both Disk options (1. Automatically Fix file system errors 2. Scan for and attempt recovery of bad sectors). Of course, it tells me that the disk is in use and asks me if I would like to check for disk errors the next time I start my computer. I click yes
View 9 Replies View RelatedHow to Run Check Disk in Windows 7 ?
View 0 Replies View RelatedI ran a disk check today. It seemed to go as normal, but when it finished my windows 7 pc didn't start. I restarted it, and same happened again - checkdisk had apparently been scheduled, ran, and - nothing. Tried restarting several times, but always the same.Hitting any key didn't stop checkdisk. PC won't start in safe mode. Recovery disk doesn't work. Can't get pc started at all.
View 5 Replies View RelatedMy computer rebooted while I slept, so I went and checked the Windows Logs for my System. Found out it was KERNEL-Power but that appears to have also taken our router and my brother's computer so I can safely assume something went wonky with the power.However, I did notice a pair of errors, both occurring a little while before the reboot, for bad blocks on my harddisk. Obviously, I decided to do a disk check.I tried to run the first one on my primary partition, C, and for that had to reboot since it holds Windows. The check ran fine for a few moments, but got stuck on a certain point when processing index (Step 2). Rebooting so it would try again got to the exact same point and was stuck.Currently running on the other partition of my main harddisk. So far so good, but I'll update if that one gets stuck as well.
View 3 Replies View Relatedcan i check everything when i run Disk Cleanup?
View 1 Replies View RelatedI just got a new MSI laptop a few days ago. I don't plug in my battery so I can reserve it for when I need it. 1 time I accidentaly unplug the power cord.. When I go to try to perform a disk check checking Automatically fix file system errors and Scan for and attempt recovery of bad sectors.. I reboot my laptop unplugged every usb attached and when it gets to the check menu it automatically cancel it.. what is happening.. I'm not pushing any keys or anything.
View 1 Replies View RelatedHow can I solve the disk check at boost? I have used seagatetool to check disk but the result is PASS, the hard drive had no problem. I have format the disk and reinstalled Windows 7 but disk check still run.
View 6 Replies View RelatedHow to Reset Check Disk to Not Run at Startup ?
View 0 Replies View RelatedMy PC has decided to do a check disk every time it boots up, what is causing it.
View 5 Replies View RelatedI have been having some weird problems on my laptop. I first did a memtest using memtest86 4.0 and that came up clean. I am now doing a disk check and it was progressing fine till now. the screen says stage 5 of 5 97% (82135612 of 84678825 free clusters processed) for over and hour and the HDD light is no longer on. any advice as to what I should do? I have heard that forcing the system to reboot during a disk check can ruin your system so I don't want to do that.
View 7 Replies View Related'm having problem with windows 7. oftenly the DISK CHECKS appear before startup. i've reformatted my computer 3 times but this disk check problem is still there.
View 9 Replies View RelatedI bought another pc today to replace my current work pc, now here is what it does since i pulled it out the box I have a ASUS CM687 it runs checkdsk every restart on D, which i think is where the recovery is at for the PC, now it trys to do it and says it was unsuccessful, thing is brand new out the box i am trying to understand why is it doing that and then saying there has been a problem trying to scan it then boots right into windows?
View 1 Replies View RelatedThough it was likely foolish of me to keep putting it off I can no longer run a disk check. The 10 second timer stops itself at 10 and proceeds to the log in screen. Not sure if it's important but my "l" key is broken and I was told that that key being broken may be counting as the "press any key to skip dick check". If that is the issue is there any way around it? And if that isn't it then why won't my disk check continue?
View 3 Replies View RelatedHow long does a full disk check take? Just curious so I can plan my time.
View 9 Replies View RelatedI've used the Win 7 built in Disk Defragmenter since day one. Noticed about two months ago that it is not checking C:. It checks the other included drives (an external HDD and a Recovery drive) on schedule. I have tried unchecking and rechecking and changing scheduled times all to no avail. As a workaround I manually analyze the drive...when I remember.
View 5 Replies View RelatedAt the time of updating avg 2011 free version my pc is giving chkdsk error i have tried to uninstall but i could not do it.
View 1 Replies View RelatedI have a drive that is a 15 GB partition on a 80 GB disk. It is an old disk, so could be failing, but action is strange. Other partitions on the drive succsessfully completed the checking disk procedure, but the 15 GB partition is taking an enourmous amount of time for each file after a swift run of the first 300 files. After that, I'm estimating it takes 10 minutes per file and has been running since 11AM yesterday. It is now near 8AM and it is still only at file 781. Is it possible for a failing disk to manifest itself in one partition before the others? Or is there some other possibility that I should examine.
View 4 Replies View RelatedPrinting to file from Quicken to PDF worked in XP by saving it in PDF but not in win 7 using "quicken pdf printer" as printer field, and it comes back with "could not open printer, check printer selection" how to set up step by step.
View 1 Replies View RelatedI went through my first attempt at building my own computer about 2 months ago and the process went fine. But about a week after I began using it, I started getting BSOD that seemed happen whenever I would run a CPU intensive program (Handbrake, VMWare Player, etc). It won't always crash when running one of these, but maybe once every couple of days when running a program such as this.I've tried the following after researching online: Ran memtest86 overnight, no errors found in RAM Put in a beefier CPU cooler (ZALMAN CNPS9500A-LED 92mm 2 Ball CPU Cooler) to lower the CPU temps Reinstalled to a fresh version of Windows 7 Ran 'verifier.exe' according to the steps shown in many posts here - the result of this is that about 30-60 seconds after I login to Windows, a BSOD occurs - this is repeatable every time until I cancel the verifier program The specs of this computer are as follows: Intel Core i7 3770 processor Microsoft Windows 7 Professional x64 Antec BP550 Plus 550W Continuous Power ATX12V V2.2 80 PLUS Certified Modular Active PFC Power Supply G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-16GBXL ASUS Sabertooth Z77 LGA 1155 Intel Z77 HDMI SATA 6Gb/z USB 3.0 ATX Intel Motherboard NVIDIA GTX GeForce 550ti (installed AFTER the BSOD started occurring) Crucial M4 2.5" 64 GB SATA III Internal SSD Seagate 300 GB HDD (don't have the exact model here) ASUS 24x DVD-RW ?
View 9 Replies View RelatedAnyways, every time I try to schedule a "Check Disk" it NEVER starts on a restart. I already did the "sfc /scannow" command on the cmd prompt. In fact it said it was UNABLE to fix some problems. I have attached a file of my "SFC scan log". Inside it says it was unable to fix "Chkdsk.exe" Go figure. Alright, just some extra information. I also think my computer is confused of itself . I mean, it seems to not know if its a 64 bit or a 86 bit! I was told to install a hotfix for "Chkdsk.exe" here [URL]. But it did NOT work. I attempted to install both 64 bit AND 86 bit hotfixes, and yes they were both windows 7 (Chkdsk.exe) hotfixes.
My system specs:
- Toshiba Qosmio X505 Laptop-
Windows 7 64bit (Yes it says 64 bit but I've tried to install other kinds of hotfixes for both 64 and 86 bits and none of them worked!)
Intel Core i5
4gb Ram
Nvidia Geforce GTS 360M
I have a Toshiba laptop with W7 upgraded to SP1.I noticed that it adds autocheck autochk /r ??C: to the default autocheck autochk * in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession Manager in regedit.Even if I modify it manually to autocheck autochk * it still adds autocheck autochk /r ??C,I don't think this is an administrator issue as my other laptop with W7 SP1 (SP1 included) does not have this problem.
View 9 Replies View RelatedSo i recently added ram to my computer, this is DDR2 RAM, so i took out 2 old sticks that were 1 gig each and put in two 2 gig sticks. Therefore all 4 of my slots are full and i have 6Gigs in total. When i tried to start up my computer i pressed F1 to save the new memory amount (This amount was indeed correct), and my computer rebooted but then stopped at a disk check. I allowed it to run the disk check for about 10-15 seconds. In this short amount of time it was displaying a bunch of corrupted files and attempting to resolve them i am guessing, but suddenly my computer restarted around 5 times in a row in 5-10 second intervals then i got the error saying: 2233 - HECI error during MEBX execution. ME BIOS Extension Module halted. Update BIOS or ME Firmware if problem persists.I have only found onereference of this on uring-MEBX-execution/td-p/4490533 which seems like it was a faulty motherboard. What i did was i took out the new sticks of RAM and put in the old sticks of RAM and tried my computer again. This time I got all the way to the disk check again and this time i skipped it. Windows started up fine but with some other issues. When i started Google Chrome, it said that my internet explorer.lnk file was corrupted. Also if i tried to reinstall internet explorer, it would fail installation near the end. (by fail i mean i would get a window saying Internet Explorer could not fully install). Next i tried Microsoft excel, and it failed saying i did not have enough memory even though my computer stated i had 6 gigs but 5.7 something usable RAM. I tried word and it instantly "Stopped Working" as windows put it. So i uninstalled microsoft office to try an reinstall it but I rebooted my computer after I uninstalled it.
View 7 Replies View RelatedA couple of weeks ago i started receiving an error on startup saying that Disk C: needed to be checked for constancy, Type of file is NTSF, Cannot open Volume for Direct Access due to a recent software package installation, please use system restore to a point prior to the software installation. There is not a restore point available to access as far back as i need to go. What do i need to do fix this problem??? Plus is there any way to figure out what program is causing this issue, so i can uninstall it??
View 14 Replies View RelatedI wanted to do the checkdisk action for my computer, it fails, and saying I have to use system restore to get rid of a recent software package installation.
View 3 Replies View Related